* dmaengine: pl330: report BURST residue granularity
From: Marek Szyprowski @ 2018-06-19 13:20 UTC (permalink / raw)
To: linux-samsung-soc, dmaengine, linux-arm-kernel, linux-kernel
Cc: Marek Szyprowski, Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz,
Vinod Koul
The reported residue is already calculated in BURST unit granularity, so
advertise this capability properly to other devices in the system.
Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/dma/pl330.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index defcdde4d358..de0957fe9668 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -3033,7 +3033,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
+ pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
1 : PL330_MAX_BURST);
^ permalink raw reply related
* MAINTAINERS: Update email-id of Sinan Kaya
From: Vinod Koul @ 2018-06-19 4:31 UTC (permalink / raw)
To: Sinan Kaya
Cc: dmaengine, timur, linux-pci, linux-arm-msm, linux-arm-kernel,
Mauro Carvalho Chehab, David S. Miller, Greg Kroah-Hartman,
Andrew Morton, Randy Dunlap, open list
On 14-06-18, 09:37, Sinan Kaya wrote:
> I'm no longer with QCOM. I am still interested in maintaining or reviewing
> PCI/DMA engine patches. Update email-id to an active one.
Applied, thanks
^ permalink raw reply
* [v2] dmaengine: ioatdma: set the completion address register after channel reset
From: Vinod Koul @ 2018-06-19 4:30 UTC (permalink / raw)
To: Dave Jiang; +Cc: dmaengine
On 11-06-18, 12:49, Dave Jiang wrote:
> It seems that starting with Skylake Xeon, channel reset clears the
> completion address register. Make sure the completion address register is
> set again after reset.
Applied, thanks
^ permalink raw reply
* [v2] dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
From: Vinod Koul @ 2018-06-19 4:29 UTC (permalink / raw)
To: Janusz Krzysztofik
Cc: dmaengine, linux-kernel, Peter Ujfalusi, Jarkko Nikula,
Liam Girdwood, Mark Brown, Jaroslav Kysela, Takashi Iwai,
alsa-devel, linux-omap, Aaro Koskinen, Tony Lindgren,
linux-arm-kernel
On 05-06-18, 18:59, Janusz Krzysztofik wrote:
> Commit 0198d7bb8a0c ("ASoC: omap-mcbsp: Convert to use the sdma-pcm
> instead of omap-pcm") resulted in broken audio playback on OMAP1510
> (discovered on Amstrad Delta).
>
> When running on OMAP1510, omap-pcm used to obtain DMA offset from
> snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
> software calculations instead of snd_dmaengine_pcm_pointer() which
> depended on residue value calculated from omap_dma_get_src_pos().
> Similar code path is still available in now used
> sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.
>
> It was verified already before that omap_get_dma_src_pos() from
> arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
> commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
> callback") for details. Apparently the same applies to its successor,
> omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.
>
> On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
> as depreciated and discouraged for use in new drivers because of its
> unreliable accuracy. However, it seems the only working option for
> OPAM1510 now, as long as a software calculated residue is not
> implemented as OMAP1510 fallback in omap-dma.
>
> Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
> snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
> can be triggered in two ways:
> - by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
> sound/soc/omap/sdma-pcm.c,
> - by passing dma_caps.residue_granularity =
> DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.
>
> Let's do the latter.
>
> Created and tested against next-20180531 tag from linux-next tree.
This is not useful for log.
I have stripped this and applied
^ permalink raw reply
* [v4,26/26] fix a series of Documentation/ broken file name references
From: Vinod Koul @ 2018-06-19 4:14 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, Mauro Carvalho Chehab,
linux-kernel, Harry Wei, Dan Williams, Darren Hart,
Andy Shevchenko, David S. Miller, Luis de Bethencourt,
Salah Triki, Mike Marshall, Martin Brandenburg, Rafael J. Wysocki,
Pavel Machek, Len Brown, linux-kernel, dmaengine,
platform-driver-x86, sparclinux, devel, linux-pm
On 15-06-18, 13:30, Mauro Carvalho Chehab wrote:
> If you have any comment or update to the content, please contact the
> original document maintainer directly. However, if you have a problem
> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
> index b451354735d3..08ba8473a284 100644
> --- a/drivers/dma/dmaengine.c
> +++ b/drivers/dma/dmaengine.c
> @@ -38,7 +38,7 @@
> * Each device has a channels list, which runs unlocked but is never modified
> * once the device is registered, it's just setup by the driver.
> *
> - * See Documentation/dmaengine.txt for more details
> + * See Documentation/driver-api/dmaengine for more details
DMAengine part:
Acked-by: Vinod Koul <vkoul@kernel.org>
^ permalink raw reply
* [v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-18 19:31 UTC (permalink / raw)
To: Daniel Mack
Cc: Haojian Zhuang, Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown, linux-arm-kernel, linux-kernel,
linux-ide, dmaengine, linux-media, linux-mmc, linux-mtd, netdev,
alsa-devel
Daniel Mack <daniel@zonque.org> writes:
> On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
>> As the pxa architecture switched towards the dmaengine slave map, the
>> old compatibility mechanism to acquire the dma requestor line number and
>> priority are not needed anymore.
>>
>> This patch simplifies the dma resource acquisition, using the more
>> generic function dma_request_slave_channel().
>>
>> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
>
> Something went wrong here, but you can simply fix that when applying the series
> :)
Indeed, fixed before applying to the pxa/for-next tree.
---
Robert
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [v3,09/14] ASoC: pxa: remove the dmaengine compat need
From: Daniel Mack @ 2018-06-17 18:17 UTC (permalink / raw)
To: Robert Jarzmik, Haojian Zhuang, Bartlomiej Zolnierkiewicz,
Tejun Heo, Vinod Koul, Mauro Carvalho Chehab, Ulf Hansson,
Miquel Raynal, Boris Brezillon, David Woodhouse, Brian Norris,
Marek Vasut, Richard Weinberger, Nicolas Pitre, Jaroslav Kysela,
Takashi Iwai, Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
Hi Mark,
I prepared a series of patches for 4.18 that conflict with this one.
Instead of letting other people resolve this down the road, I'd prefer
if this one went through the ASoC tree, if you don't mind.
I've talked to Robert off-list, and he's fine with this approach.
Thanks,
Daniel
On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
>
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Reviewed-by: Daniel Mack <daniel@zonque.org>
> Acked-by: Mark Brown <broonie@kernel.org>
> ---
> sound/arm/pxa2xx-ac97.c | 14 ++------------
> sound/arm/pxa2xx-pcm-lib.c | 6 +++---
> sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
> sound/soc/pxa/pxa2xx-i2s.c | 6 ++----
> 4 files changed, 12 insertions(+), 46 deletions(-)
>
> diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
> index 4bc244c40f80..236a63cdaf9f 100644
> --- a/sound/arm/pxa2xx-ac97.c
> +++ b/sound/arm/pxa2xx-ac97.c
> @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
> .reset = pxa2xx_ac97_legacy_reset,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 12,
> -};
> -
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_out",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_out_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 11,
> };
>
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_in",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_in_req,
> };
>
> static struct snd_pcm *pxa2xx_ac97_pcm;
> diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
> index e8da3b8ee721..dcbe7ecc1835 100644
> --- a/sound/arm/pxa2xx-pcm-lib.c
> +++ b/sound/arm/pxa2xx-pcm-lib.c
> @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
> if (ret < 0)
> return ret;
>
> - return snd_dmaengine_pcm_open_request_chan(substream,
> - pxad_filter_fn,
> - dma_params->filter_data);
> + return snd_dmaengine_pcm_open(
> + substream, dma_request_slave_channel(rtd->cpu_dai->dev,
> + dma_params->chan_name));
> }
> EXPORT_SYMBOL(__pxa2xx_pcm_open);
>
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 803818aabee9..1b41c0f2a8fb 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
> .reset = pxa2xx_ac97_cold_reset,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 11,
> -};
> -
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_in",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_stereo_in_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 12,
> };
>
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
> .addr = __PREG(PCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "pcm_pcm_stereo_out",
> .maxburst = 32,
> - .filter_data = &pxa2xx_ac97_pcm_stereo_out_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 10,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
> .addr = __PREG(MODR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mono_out",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 9,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
> .addr = __PREG(MODR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mono_in",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req,
> };
>
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
> - .prio = PXAD_PRIO_LOWEST,
> - .drcmr = 8,
> -};
> static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
> .addr = __PREG(MCDR),
> .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
> + .chan_name = "pcm_aux_mic_mono",
> .maxburst = 16,
> - .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req,
> };
>
> static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
> diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
> index 3fb60baf6eab..e7184de0de04 100644
> --- a/sound/soc/pxa/pxa2xx-i2s.c
> +++ b/sound/soc/pxa/pxa2xx-i2s.c
> @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
> static struct clk *clk_i2s;
> static int clk_ena = 0;
>
> -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
> static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
> .addr = __PREG(SADR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "tx",
> .maxburst = 32,
> - .filter_data = &pxa2xx_i2s_pcm_stereo_out_req,
> };
>
> -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
> static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
> .addr = __PREG(SADR),
> .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
> + .chan_name = "rx",
> .maxburst = 32,
> - .filter_data = &pxa2xx_i2s_pcm_stereo_in_req,
> };
>
> static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
>
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
From: Daniel Mack @ 2018-06-17 18:12 UTC (permalink / raw)
To: Robert Jarzmik, Haojian Zhuang, Bartlomiej Zolnierkiewicz,
Tejun Heo, Vinod Koul, Mauro Carvalho Chehab, Ulf Hansson,
Miquel Raynal, Boris Brezillon, David Woodhouse, Brian Norris,
Marek Vasut, Richard Weinberger, Nicolas Pitre, Jaroslav Kysela,
Takashi Iwai, Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
On Sunday, June 17, 2018 07:02 PM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
>
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
>
> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
Something went wrong here, but you can simply fix that when applying the
series :)
Daniel
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
> 1 file changed, 1 insertion(+), 16 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index 10e953218948..64618254d6de 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
> dev);
> struct dma_slave_config config = {};
> struct resource *r;
> - dma_cap_mask_t mask;
> - struct pxad_param param;
> int ret;
>
> if (!IS_ENABLED(CONFIG_PXA_DMA)) {
> @@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
> if (ret)
> return ret;
>
> - r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> - if (!r) {
> - dev_err(nfc->dev, "No resource defined for data DMA\n");
> - return -ENXIO;
> - }
> -
> - param.drcmr = r->start;
> - param.prio = PXAD_PRIO_LOWEST;
> - dma_cap_zero(mask);
> - dma_cap_set(DMA_SLAVE, mask);
> - nfc->dma_chan =
> - dma_request_slave_channel_compat(mask, pxad_filter_fn,
> - ¶m, nfc->dev,
> - "data");
> + nfc->dma_chan = dma_request_slave_channel(nfc->dev, "data");
> if (!nfc->dma_chan) {
> dev_err(nfc->dev,
> "Unable to request data DMA channel\n");
>
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [v3,14/14] ARM: pxa: change SSP DMA channels allocation
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.
This specifically means that :
- for platform data based machines, the DMA requestor channels are
extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
ssp.<N>, and the channels are either "rx" or "tx".
- for device tree platforms, the dma node should be hooked into the
pxa2xx-ac97 or pxa-ssp-dai node.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Mack <daniel@zonque.org>
---
Since v1: Removed channel names from platform_data
Since v2: Added Daniel's ack
---
arch/arm/plat-pxa/ssp.c | 47 ----------------------------------------------
include/linux/pxa2xx_ssp.h | 2 --
sound/soc/pxa/pxa-ssp.c | 5 ++---
3 files changed, 2 insertions(+), 52 deletions(-)
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
if (IS_ERR(ssp->clk))
return PTR_ERR(ssp->clk);
- if (dev->of_node) {
- struct of_phandle_args dma_spec;
- struct device_node *np = dev->of_node;
- int ret;
-
- /*
- * FIXME: we should allocate the DMA channel from this
- * context and pass the channel down to the ssp users.
- * For now, we lookup the rx and tx indices manually
- */
-
- /* rx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 0, &dma_spec);
-
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = dma_spec.args[0];
- of_node_put(dma_spec.np);
-
- /* tx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 1, &dma_spec);
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = dma_spec.args[0];
- of_node_put(dma_spec.np);
- } else {
- res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (res == NULL) {
- dev_err(dev, "no SSP RX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (res == NULL) {
- dev_err(dev, "no SSP TX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = res->start;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
int type;
int use_count;
int irq;
- int drcmr_rx;
- int drcmr_tx;
struct device_node *of_node;
};
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0291c7cb64eb..e09368d89bbc 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
if (!dma)
return -ENOMEM;
-
- dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- &ssp->drcmr_tx : &ssp->drcmr_rx;
+ dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ "tx" : "rx";
snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
^ permalink raw reply related
* [v3,13/14] ARM: pxa: remove the DMA IO resources
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the last driver using the former mechanism to acquire the DMA
requestor line has be converted to the dma_slave_map, remove all these
resources from the PXA devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
arch/arm/mach-pxa/devices.c | 136 --------------------------------------------
1 file changed, 136 deletions(-)
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e8915fc340d..5a16ea74e28a 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -60,16 +60,6 @@ static struct resource pxamci_resources[] = {
.end = IRQ_MMC,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = 21,
- .end = 21,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = 22,
- .end = 22,
- .flags = IORESOURCE_DMA,
- },
};
static u64 pxamci_dmamask = 0xffffffffUL;
@@ -407,16 +397,6 @@ static struct resource pxa_ir_resources[] = {
.end = 0x40700023,
.flags = IORESOURCE_MEM,
},
- [5] = {
- .start = 17,
- .end = 17,
- .flags = IORESOURCE_DMA,
- },
- [6] = {
- .start = 18,
- .end = 18,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa_device_ficp = {
@@ -545,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = {
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 13,
- .end = 13,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 14,
- .end = 14,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa25x_device_ssp = {
@@ -583,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = {
.end = IRQ_NSSP,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 15,
- .end = 15,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 16,
- .end = 16,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa25x_device_nssp = {
@@ -621,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = {
.end = IRQ_ASSP,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 23,
- .end = 23,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 24,
- .end = 24,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa25x_device_assp = {
@@ -751,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = {
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 13,
- .end = 13,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 14,
- .end = 14,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa27x_device_ssp1 = {
@@ -789,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = {
.end = IRQ_SSP2,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 15,
- .end = 15,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 16,
- .end = 16,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa27x_device_ssp2 = {
@@ -827,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = {
.end = IRQ_SSP3,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 66,
- .end = 66,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 67,
- .end = 67,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa27x_device_ssp3 = {
@@ -895,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = {
.end = IRQ_MMC2,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = 93,
- .end = 93,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = 94,
- .end = 94,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa3xx_device_mci2 = {
@@ -934,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = {
.end = IRQ_MMC3,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = 100,
- .end = 100,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = 101,
- .end = 101,
- .flags = IORESOURCE_DMA,
- },
};
struct platform_device pxa3xx_device_mci3 = {
@@ -1021,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = {
.end = IRQ_NAND,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for Data DMA */
- .start = 97,
- .end = 97,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for Command DMA */
- .start = 99,
- .end = 99,
- .flags = IORESOURCE_DMA,
- },
};
static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
@@ -1066,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = {
.end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- /* DRCMR for RX */
- .start = 2,
- .end = 2,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- /* DRCMR for TX */
- .start = 3,
- .end = 3,
- .flags = IORESOURCE_DMA,
- },
};
/*
^ permalink raw reply related
* [v3,12/14] dmaengine: pxa: make the filter function internal
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: added Vinod's ack
---
drivers/dma/pxa_dma.c | 5 ++---
include/linux/dma/pxa-dma.h | 11 -----------
2 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b31c28b67ad3..0db29bd1b096 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,7 +179,7 @@ static unsigned int pxad_drcmr(unsigned int line)
return 0x1000 + line * 4;
}
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
+static bool pxad_filter_fn(struct dma_chan *chan, void *param);
/*
* Debug fs
@@ -1501,7 +1501,7 @@ static struct platform_driver pxad_driver = {
.remove = pxad_remove,
};
-bool pxad_filter_fn(struct dma_chan *chan, void *param)
+static bool pxad_filter_fn(struct dma_chan *chan, void *param)
{
struct pxad_chan *c = to_pxad_chan(chan);
struct pxad_param *p = param;
@@ -1514,7 +1514,6 @@ bool pxad_filter_fn(struct dma_chan *chan, void *param)
return true;
}
-EXPORT_SYMBOL_GPL(pxad_filter_fn);
module_platform_driver(pxad_driver);
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index 9fc594f69eff..fceb5df07097 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -23,15 +23,4 @@ struct pxad_param {
enum pxad_chan_prio prio;
};
-struct dma_chan;
-
-#ifdef CONFIG_PXA_DMA
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
-#else
-static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
-{
- return false;
-}
-#endif
-
#endif /* _PXA_DMA_H_ */
^ permalink raw reply related
* [v3,11/14] dmaengine: pxa: document pxad_param
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: added Vinod's ack
---
include/linux/dma/pxa-dma.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index e56ec7af4fd7..9fc594f69eff 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -9,6 +9,15 @@ enum pxad_chan_prio {
PXAD_PRIO_LOWEST,
};
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
struct pxad_param {
unsigned int drcmr;
enum pxad_chan_prio prio;
^ permalink raw reply related
* [v3,10/14] ata: pata_pxa: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/ata/pata_pxa.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index f6c46e9a4dc0..e8b6a2e464c9 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -25,7 +25,6 @@
#include <linux/libata.h>
#include <linux/platform_device.h>
#include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/completion.h>
@@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
struct resource *irq_res;
struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
struct dma_slave_config config;
- dma_cap_mask_t mask;
- struct pxad_param param;
int ret = 0;
/*
@@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
ap->private_data = data;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- param.prio = PXAD_PRIO_LOWEST;
- param.drcmr = pdata->dma_dreq;
memset(&config, 0, sizeof(config));
config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
* Request the DMA channel
*/
data->dma_chan =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m, &pdev->dev, "data");
+ dma_request_slave_channel(&pdev->dev, "data");
if (!data->dma_chan)
return -EBUSY;
ret = dmaengine_slave_config(data->dma_chan, &config);
^ permalink raw reply related
* [v3,09/14] ASoC: pxa: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Acked-by: Mark Brown <broonie@kernel.org>
---
sound/arm/pxa2xx-ac97.c | 14 ++------------
sound/arm/pxa2xx-pcm-lib.c | 6 +++---
sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
sound/soc/pxa/pxa2xx-i2s.c | 6 ++----
4 files changed, 12 insertions(+), 46 deletions(-)
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4bc244c40f80..236a63cdaf9f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
.reset = pxa2xx_ac97_legacy_reset,
};
-static struct pxad_param pxa2xx_ac97_pcm_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 12,
-};
-
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_out",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_out_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 11,
};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_in",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_in_req,
};
static struct snd_pcm *pxa2xx_ac97_pcm;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index e8da3b8ee721..dcbe7ecc1835 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
if (ret < 0)
return ret;
- return snd_dmaengine_pcm_open_request_chan(substream,
- pxad_filter_fn,
- dma_params->filter_data);
+ return snd_dmaengine_pcm_open(
+ substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+ dma_params->chan_name));
}
EXPORT_SYMBOL(__pxa2xx_pcm_open);
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 803818aabee9..1b41c0f2a8fb 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
.reset = pxa2xx_ac97_cold_reset,
};
-static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 11,
-};
-
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_in",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_stereo_in_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 12,
};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_out",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_stereo_out_req,
};
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 10,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
.addr = __PREG(MODR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mono_out",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req,
};
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 9,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
.addr = __PREG(MODR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mono_in",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req,
};
-static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 8,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
.addr = __PREG(MCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mic_mono",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req,
};
static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 3fb60baf6eab..e7184de0de04 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
static struct clk *clk_i2s;
static int clk_ena = 0;
-static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
.addr = __PREG(SADR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "tx",
.maxburst = 32,
- .filter_data = &pxa2xx_i2s_pcm_stereo_out_req,
};
-static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
.addr = __PREG(SADR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "rx",
.maxburst = 32,
- .filter_data = &pxa2xx_i2s_pcm_stereo_in_req,
};
static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
^ permalink raw reply related
* [v3,08/14] net: smc91x: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v2: converted to NULL filter function and NULL dma parameter call
---
drivers/net/ethernet/smsc/smc91x.c | 9 +--------
drivers/net/ethernet/smsc/smc91x.h | 1 -
2 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 080428762858..b944828f9ea3 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2019,17 +2019,10 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
# endif
if (lp->cfg.flags & SMC91X_USE_DMA) {
dma_cap_mask_t mask;
- struct pxad_param param;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- param.prio = PXAD_PRIO_LOWEST;
- param.drcmr = -1UL;
-
- lp->dma_chan =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m, &dev->dev,
- "data");
+ lp->dma_chan = dma_request_channel(mask, NULL, NULL);
}
#endif
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index b337ee97e0c0..a27352229fc2 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -301,7 +301,6 @@ struct smc_local {
* as RX which can overrun memory and lose packets.
*/
#include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
#ifdef SMC_insl
#undef SMC_insl
^ permalink raw reply related
* [v3,07/14] net: smc911x: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v2: converted to NULL filter function and NULL dma parameter call
---
drivers/net/ethernet/smsc/smc911x.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 05157442a980..b1b53f6c452f 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -74,7 +74,6 @@ static const char version[] =
#include <linux/skbuff.h>
#include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
#include <asm/io.h>
@@ -1795,7 +1794,6 @@ static int smc911x_probe(struct net_device *dev)
#ifdef SMC_USE_DMA
struct dma_slave_config config;
dma_cap_mask_t mask;
- struct pxad_param param;
#endif
DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1971,15 +1969,8 @@ static int smc911x_probe(struct net_device *dev)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- param.prio = PXAD_PRIO_LOWEST;
- param.drcmr = -1UL;
-
- lp->rxdma =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m, &dev->dev, "rx");
- lp->txdma =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m, &dev->dev, "tx");
+ lp->rxdma = dma_request_channel(mask, NULL, NULL);
+ lp->txdma = dma_request_channel(mask, NULL, NULL);
lp->rxdma_active = 0;
lp->txdma_active = 0;
^ permalink raw reply related
* [v3,06/14] mtd: rawnand: marvell: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
1 file changed, 1 insertion(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 10e953218948..64618254d6de 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
dev);
struct dma_slave_config config = {};
struct resource *r;
- dma_cap_mask_t mask;
- struct pxad_param param;
int ret;
if (!IS_ENABLED(CONFIG_PXA_DMA)) {
@@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
if (ret)
return ret;
- r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!r) {
- dev_err(nfc->dev, "No resource defined for data DMA\n");
- return -ENXIO;
- }
-
- param.drcmr = r->start;
- param.prio = PXAD_PRIO_LOWEST;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- nfc->dma_chan =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m, nfc->dev,
- "data");
+ nfc->dma_chan = dma_request_slave_channel(nfc->dev, "data");
if (!nfc->dma_chan) {
dev_err(nfc->dev,
"Unable to request data DMA channel\n");
^ permalink raw reply related
* [v3,05/14] media: pxa_camera: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
drivers/media/platform/pxa_camera.c | 22 +++-------------------
1 file changed, 3 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index c71a00736541..4c82d1880753 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2357,8 +2357,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
.src_maxburst = 8,
.direction = DMA_DEV_TO_MEM,
};
- dma_cap_mask_t mask;
- struct pxad_param params;
char clk_name[V4L2_CLK_NAME_SIZE];
int irq;
int err = 0, i;
@@ -2432,34 +2430,20 @@ static int pxa_camera_probe(struct platform_device *pdev)
pcdev->base = base;
/* request dma */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_cap_set(DMA_PRIVATE, mask);
-
- params.prio = 0;
- params.drcmr = 68;
- pcdev->dma_chans[0] =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶ms, &pdev->dev, "CI_Y");
+ pcdev->dma_chans[0] = dma_request_slave_channel(&pdev->dev, "CI_Y");
if (!pcdev->dma_chans[0]) {
dev_err(&pdev->dev, "Can't request DMA for Y\n");
return -ENODEV;
}
- params.drcmr = 69;
- pcdev->dma_chans[1] =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶ms, &pdev->dev, "CI_U");
+ pcdev->dma_chans[1] = dma_request_slave_channel(&pdev->dev, "CI_U");
if (!pcdev->dma_chans[1]) {
dev_err(&pdev->dev, "Can't request DMA for Y\n");
err = -ENODEV;
goto exit_free_dma_y;
}
- params.drcmr = 70;
- pcdev->dma_chans[2] =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶ms, &pdev->dev, "CI_V");
+ pcdev->dma_chans[2] = dma_request_slave_channel(&pdev->dev, "CI_V");
if (!pcdev->dma_chans[2]) {
dev_err(&pdev->dev, "Can't request DMA for V\n");
err = -ENODEV;
^ permalink raw reply related
* [v3,04/14] mmc: pxamci: remove the dmaengine compat need
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/pxamci.c | 29 +++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index c763b404510f..6c94474e36f4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
@@ -637,10 +636,8 @@ static int pxamci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
- struct resource *r, *dmarx, *dmatx;
- struct pxad_param param_rx, param_tx;
+ struct resource *r;
int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
- dma_cap_mask_t mask;
ret = pxamci_of_init(pdev);
if (ret)
@@ -739,34 +736,14 @@ static int pxamci_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mmc);
- if (!pdev->dev.of_node) {
- dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!dmarx || !dmatx) {
- ret = -ENXIO;
- goto out;
- }
- param_rx.prio = PXAD_PRIO_LOWEST;
- param_rx.drcmr = dmarx->start;
- param_tx.prio = PXAD_PRIO_LOWEST;
- param_tx.drcmr = dmatx->start;
- }
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- host->dma_chan_rx =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m_rx, &pdev->dev, "rx");
+ host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx");
if (host->dma_chan_rx == NULL) {
dev_err(&pdev->dev, "unable to request rx dma channel\n");
ret = -ENODEV;
goto out;
}
- host->dma_chan_tx =
- dma_request_slave_channel_compat(mask, pxad_filter_fn,
- ¶m_tx, &pdev->dev, "tx");
+ host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx");
if (host->dma_chan_tx == NULL) {
dev_err(&pdev->dev, "unable to request tx dma channel\n");
ret = -ENODEV;
^ permalink raw reply related
* [v3,03/14] dmaengine: pxa: add a default requestor policy
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel, Arnd Bergmann
As what former drcmr -1 value meant, add a this as a default to each
channel, ie. that by default no requestor line is used.
This is specifically used for network drivers smc91x and smc911x, and
needed for their port to slave maps.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Since v1: changed -1 to U32_MAX
---
drivers/dma/pxa_dma.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 9505334f9c6e..b31c28b67ad3 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -762,6 +762,8 @@ static void pxad_free_chan_resources(struct dma_chan *dchan)
dma_pool_destroy(chan->desc_pool);
chan->desc_pool = NULL;
+ chan->drcmr = U32_MAX;
+ chan->prio = PXAD_PRIO_LOWEST;
}
static void pxad_free_desc(struct virt_dma_desc *vd)
@@ -1386,6 +1388,9 @@ static int pxad_init_dmadev(struct platform_device *op,
c = devm_kzalloc(&op->dev, sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
+
+ c->drcmr = U32_MAX;
+ c->prio = PXAD_PRIO_LOWEST;
c->vc.desc_free = pxad_free_desc;
vchan_init(&c->vc, &pdev->slave);
init_waitqueue_head(&c->wq_state);
^ permalink raw reply related
* [v3,02/14] ARM: pxa: add dma slave map
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.
This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
---
Since v1: revamped the SSP part, split into pxa25.c, pxa27x.c and
pxa3xx.c, and add pxa-i2s.
---
arch/arm/mach-pxa/devices.c | 12 +++---------
arch/arm/mach-pxa/devices.h | 6 +++++-
arch/arm/mach-pxa/pxa25x.c | 38 +++++++++++++++++++++++++++++++++++++-
arch/arm/mach-pxa/pxa27x.c | 39 ++++++++++++++++++++++++++++++++++++++-
arch/arm/mach-pxa/pxa3xx.c | 41 ++++++++++++++++++++++++++++++++++++++++-
5 files changed, 123 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d7c9a8476d57..1e8915fc340d 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -1202,11 +1203,6 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
platform_device_add(pd);
}
-static struct mmp_dma_platdata pxa_dma_pdata = {
- .dma_channels = 0,
- .nb_requestors = 0,
-};
-
static struct resource pxa_dma_resource[] = {
[0] = {
.start = 0x40000000,
@@ -1233,9 +1229,7 @@ static struct platform_device pxa2xx_pxa_dma = {
.resource = pxa_dma_resource,
};
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
{
- pxa_dma_pdata.dma_channels = nb_channels;
- pxa_dma_pdata.nb_requestors = nb_requestors;
- pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
+ pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 11263f7c455b..498b07bc6a3e 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0 */
+#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \
+ .prio = PXAD_PRIO_##_prio, .drcmr = _requestor })
+struct mmp_dma_platdata;
+
extern struct platform_device pxa_device_pmu;
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
@@ -55,7 +59,7 @@ extern struct platform_device pxa3xx_device_gpio;
extern struct platform_device pxa93x_device_gpio;
void __init pxa_register_device(struct platform_device *dev, void *data);
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
struct i2c_pxa_platform_data;
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index ba431fad5c47..ab8808ce7e21 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,8 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
@@ -26,6 +28,7 @@
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
+#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@@ -201,6 +204,39 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa_device_asoc_platform,
};
+static const struct dma_slave_map pxa25x_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+
+ /* PXA25x specific map */
+ { "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
+ { "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
+};
+
+static struct mmp_dma_platdata pxa25x_dma_pdata = {
+ .dma_channels = 16,
+ .nb_requestors = 40,
+ .slave_map = pxa25x_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa25x_slave_map),
+};
+
static int __init pxa25x_init(void)
{
int ret = 0;
@@ -215,7 +251,7 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
if (!of_have_populated_dt()) {
- pxa2xx_set_dmac_info(16, 40);
+ pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0c06f383ad52..5a8990a9313d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
@@ -23,6 +25,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -297,6 +300,40 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
+static const struct dma_slave_map pxa27x_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+ /* PXA27x specific map */
+ { "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+ { "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+ { "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
+ { "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
+ { "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
+};
+
+static struct mmp_dma_platdata pxa27x_dma_pdata = {
+ .dma_channels = 32,
+ .nb_requestors = 75,
+ .slave_map = pxa27x_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa27x_slave_map),
+};
+
static int __init pxa27x_init(void)
{
int ret = 0;
@@ -313,7 +350,7 @@ static int __init pxa27x_init(void)
if (!of_have_populated_dt()) {
pxa_register_device(&pxa27x_device_gpio,
&pxa27x_gpio_info);
- pxa2xx_set_dmac_info(32, 75);
+ pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
ret = platform_add_devices(devices,
ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4b8a0df8ea57..22ff8ce6761c 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,6 +12,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -24,6 +26,7 @@
#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@@ -421,6 +424,42 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
+static const struct dma_slave_map pxa3xx_slave_map[] = {
+ /* PXA25x, PXA27x and PXA3xx common entries */
+ { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+ { "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+ PDMA_FILTER_PARAM(LOWEST, 10) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+ { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+ { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+ { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+ { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+ { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+ { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+ { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+ { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+ { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+ { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+ { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+
+ /* PXA3xx specific map */
+ { "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+ { "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+ { "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
+ { "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
+ { "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
+ { "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
+ { "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
+};
+
+static struct mmp_dma_platdata pxa3xx_dma_pdata = {
+ .dma_channels = 32,
+ .nb_requestors = 100,
+ .slave_map = pxa3xx_slave_map,
+ .slave_map_cnt = ARRAY_SIZE(pxa3xx_slave_map),
+};
+
static int __init pxa3xx_init(void)
{
int ret = 0;
@@ -452,7 +491,7 @@ static int __init pxa3xx_init(void)
if (of_have_populated_dt())
return 0;
- pxa2xx_set_dmac_info(32, 100);
+ pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
return ret;
^ permalink raw reply related
* [v3,01/14] dmaengine: pxa: use a dma slave map
From: Robert Jarzmik @ 2018-06-17 17:02 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik,
Bartlomiej Zolnierkiewicz, Tejun Heo, Vinod Koul,
Mauro Carvalho Chehab, Ulf Hansson, Miquel Raynal,
Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
Richard Weinberger, Nicolas Pitre, Jaroslav Kysela, Takashi Iwai,
Liam Girdwood, Mark Brown
Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine, linux-media,
linux-mmc, linux-mtd, netdev, alsa-devel
In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.
This won't impact MMP architecture, but is aimed only at all PXA boards.
This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
drivers/dma/pxa_dma.c | 10 +++++++++-
include/linux/platform_data/mmp_dma.h | 4 ++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b53fb618bbf6..9505334f9c6e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,6 +179,8 @@ static unsigned int pxad_drcmr(unsigned int line)
return 0x1000 + line * 4;
}
+bool pxad_filter_fn(struct dma_chan *chan, void *param);
+
/*
* Debug fs
*/
@@ -1396,9 +1398,10 @@ static int pxad_probe(struct platform_device *op)
{
struct pxad_device *pdev;
const struct of_device_id *of_id;
+ const struct dma_slave_map *slave_map = NULL;
struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
struct resource *iores;
- int ret, dma_channels = 0, nb_requestors = 0;
+ int ret, dma_channels = 0, nb_requestors = 0, slave_map_cnt = 0;
const enum dma_slave_buswidth widths =
DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1429,6 +1432,8 @@ static int pxad_probe(struct platform_device *op)
} else if (pdata && pdata->dma_channels) {
dma_channels = pdata->dma_channels;
nb_requestors = pdata->nb_requestors;
+ slave_map = pdata->slave_map;
+ slave_map_cnt = pdata->slave_map_cnt;
} else {
dma_channels = 32; /* default 32 channel */
}
@@ -1440,6 +1445,9 @@ static int pxad_probe(struct platform_device *op)
pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy;
pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg;
pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic;
+ pdev->slave.filter.map = slave_map;
+ pdev->slave.filter.mapcnt = slave_map_cnt;
+ pdev->slave.filter.fn = pxad_filter_fn;
pdev->slave.copy_align = PDMA_ALIGNMENT;
pdev->slave.src_addr_widths = widths;
diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index d1397c8ed94e..6397b9c8149a 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -12,9 +12,13 @@
#ifndef MMP_DMA_H
#define MMP_DMA_H
+struct dma_slave_map;
+
struct mmp_dma_platdata {
int dma_channels;
int nb_requestors;
+ int slave_map_cnt;
+ const struct dma_slave_map *slave_map;
};
#endif /* MMP_DMA_H */
^ permalink raw reply related
* [v4,26/26] fix a series of Documentation/ broken file name references
From: Rafael J. Wysocki @ 2018-06-16 15:52 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Linux Doc Mailing List, Jonathan Corbet, Mauro Carvalho Chehab,
Linux Kernel Mailing List, Harry Wei, Vinod Koul, Dan Williams,
Darren Hart, Andy Shevchenko, David S. Miller,
Luis de Bethencourt, Salah Triki, Mike Marshall,
Martin Brandenburg, Rafael J. Wysocki, Pavel Machek, Len Brown,
linux-kernel, dmaengine, Platform Driver, sparclinux, devel,
Linux PM
On Fri, Jun 15, 2018 at 6:30 PM, Mauro Carvalho Chehab
<mchehab+samsung@kernel.org> wrote:
> As files move around, their previous links break. Fix the
> references for them.
>
> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
> Documentation/translations/zh_CN/io_ordering.txt | 2 +-
> drivers/dma/dmaengine.c | 2 +-
> drivers/platform/x86/Kconfig | 2 +-
> drivers/sbus/char/oradax.c | 2 +-
> fs/befs/ChangeLog | 2 +-
> fs/orangefs/orangefs-sysfs.c | 2 +-
> include/linux/platform_data/sc18is602.h | 2 +-
> kernel/power/main.c | 5 +++--
> 8 files changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt
> index e592daf4e014..1f8127bdd415 100644
> --- a/Documentation/translations/zh_CN/io_ordering.txt
> +++ b/Documentation/translations/zh_CN/io_ordering.txt
> @@ -1,4 +1,4 @@
> -Chinese translated version of Documentation/io_orderings.txt
> +Chinese translated version of Documentation/io_ordering.txt
>
> If you have any comment or update to the content, please contact the
> original document maintainer directly. However, if you have a problem
> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
> index b451354735d3..08ba8473a284 100644
> --- a/drivers/dma/dmaengine.c
> +++ b/drivers/dma/dmaengine.c
> @@ -38,7 +38,7 @@
> * Each device has a channels list, which runs unlocked but is never modified
> * once the device is registered, it's just setup by the driver.
> *
> - * See Documentation/dmaengine.txt for more details
> + * See Documentation/driver-api/dmaengine for more details
> */
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index f27cb186437d..ac4d48830415 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -1052,7 +1052,7 @@ config SAMSUNG_LAPTOP
> function keys, wireless LED, LCD backlight level.
>
> It may also provide some sysfs files described in
> - <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop>
> + <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
>
> To compile this driver as a module, choose M here: the module
> will be called samsung-laptop.
> diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c
> index 1754f55e2fac..524f9ea62e52 100644
> --- a/drivers/sbus/char/oradax.c
> +++ b/drivers/sbus/char/oradax.c
> @@ -30,7 +30,7 @@
> * the recommended way for applications to use the coprocessor, and
> * the driver interface is not intended for general use.
> *
> - * See Documentation/sparc/oradax/oracle_dax.txt for more details.
> + * See Documentation/sparc/oradax/oracle-dax.txt for more details.
> */
>
> #include <linux/uaccess.h>
> diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog
> index 16f2dfe8c2f7..aff7eec8f327 100644
> --- a/fs/befs/ChangeLog
> +++ b/fs/befs/ChangeLog
> @@ -389,7 +389,7 @@ Version 0.4 (2001-10-28)
> (fs/nls/Config.in)
>
> * Added Configure.help entries for CONFIG_BEFS_FS and CONFIG_DEBUG_BEFS
> - (Documentation/Configure.help)
> + (currently at fs/befs/Kconfig)
>
> 2001-08-??
> ==========
> diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c
> index 079a465796f3..dd28079f518c 100644
> --- a/fs/orangefs/orangefs-sysfs.c
> +++ b/fs/orangefs/orangefs-sysfs.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> - * Documentation/ABI/stable/orangefs-sysfs:
> + * Documentation/ABI/stable/sysfs-fs-orangefs:
> *
> * What: /sys/fs/orangefs/perf_counter_reset
> * Date: June 2015
> diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h
> index 997b06634152..18602cab7799 100644
> --- a/include/linux/platform_data/sc18is602.h
> +++ b/include/linux/platform_data/sc18is602.h
> @@ -7,7 +7,7 @@
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> *
> - * For further information, see the Documentation/spi/sc18is602 file.
> + * For further information, see the Documentation/spi/spi-sc18is602 file.
> */
>
> /**
> diff --git a/kernel/power/main.c b/kernel/power/main.c
> index 705c2366dafe..d9706da10930 100644
> --- a/kernel/power/main.c
> +++ b/kernel/power/main.c
> @@ -455,8 +455,9 @@ struct kobject *power_kobj;
> * state - control system sleep states.
> *
> * show() returns available sleep state labels, which may be "mem", "standby",
> - * "freeze" and "disk" (hibernation). See Documentation/power/states.txt for a
> - * description of what they mean.
> + * "freeze" and "disk" (hibernation).
> + * See Documentation/admin-guide/pm/sleep-states.rst for a description of
> + * what they mean.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
for the PM part above.
> *
> * store() accepts one of those strings, translates it into the proper
> * enumerated value, and initiates a suspend transition.
> --
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [v4,26/26] fix a series of Documentation/ broken file name references
From: Mauro Carvalho Chehab @ 2018-06-15 16:30 UTC (permalink / raw)
To: Linux Doc Mailing List, Jonathan Corbet
Cc: Mauro Carvalho Chehab, Mauro Carvalho Chehab, linux-kernel,
Harry Wei, Vinod Koul, Dan Williams, Darren Hart, Andy Shevchenko,
David S. Miller, Luis de Bethencourt, Salah Triki, Mike Marshall,
Martin Brandenburg, Rafael J. Wysocki, Pavel Machek, Len Brown,
linux-kernel, dmaengine, platform-driver-x86, sparclinux, devel,
linux-pm
As files move around, their previous links break. Fix the
references for them.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
Documentation/translations/zh_CN/io_ordering.txt | 2 +-
drivers/dma/dmaengine.c | 2 +-
drivers/platform/x86/Kconfig | 2 +-
drivers/sbus/char/oradax.c | 2 +-
fs/befs/ChangeLog | 2 +-
fs/orangefs/orangefs-sysfs.c | 2 +-
include/linux/platform_data/sc18is602.h | 2 +-
kernel/power/main.c | 5 +++--
8 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt
index e592daf4e014..1f8127bdd415 100644
--- a/Documentation/translations/zh_CN/io_ordering.txt
+++ b/Documentation/translations/zh_CN/io_ordering.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/io_orderings.txt
+Chinese translated version of Documentation/io_ordering.txt
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index b451354735d3..08ba8473a284 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -38,7 +38,7 @@
* Each device has a channels list, which runs unlocked but is never modified
* once the device is registered, it's just setup by the driver.
*
- * See Documentation/dmaengine.txt for more details
+ * See Documentation/driver-api/dmaengine for more details
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f27cb186437d..ac4d48830415 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1052,7 +1052,7 @@ config SAMSUNG_LAPTOP
function keys, wireless LED, LCD backlight level.
It may also provide some sysfs files described in
- <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop>
+ <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
To compile this driver as a module, choose M here: the module
will be called samsung-laptop.
diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c
index 1754f55e2fac..524f9ea62e52 100644
--- a/drivers/sbus/char/oradax.c
+++ b/drivers/sbus/char/oradax.c
@@ -30,7 +30,7 @@
* the recommended way for applications to use the coprocessor, and
* the driver interface is not intended for general use.
*
- * See Documentation/sparc/oradax/oracle_dax.txt for more details.
+ * See Documentation/sparc/oradax/oracle-dax.txt for more details.
*/
#include <linux/uaccess.h>
diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog
index 16f2dfe8c2f7..aff7eec8f327 100644
--- a/fs/befs/ChangeLog
+++ b/fs/befs/ChangeLog
@@ -389,7 +389,7 @@ Version 0.4 (2001-10-28)
(fs/nls/Config.in)
* Added Configure.help entries for CONFIG_BEFS_FS and CONFIG_DEBUG_BEFS
- (Documentation/Configure.help)
+ (currently at fs/befs/Kconfig)
2001-08-??
==========
diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c
index 079a465796f3..dd28079f518c 100644
--- a/fs/orangefs/orangefs-sysfs.c
+++ b/fs/orangefs/orangefs-sysfs.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Documentation/ABI/stable/orangefs-sysfs:
+ * Documentation/ABI/stable/sysfs-fs-orangefs:
*
* What: /sys/fs/orangefs/perf_counter_reset
* Date: June 2015
diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h
index 997b06634152..18602cab7799 100644
--- a/include/linux/platform_data/sc18is602.h
+++ b/include/linux/platform_data/sc18is602.h
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * For further information, see the Documentation/spi/sc18is602 file.
+ * For further information, see the Documentation/spi/spi-sc18is602 file.
*/
/**
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 705c2366dafe..d9706da10930 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -455,8 +455,9 @@ struct kobject *power_kobj;
* state - control system sleep states.
*
* show() returns available sleep state labels, which may be "mem", "standby",
- * "freeze" and "disk" (hibernation). See Documentation/power/states.txt for a
- * description of what they mean.
+ * "freeze" and "disk" (hibernation).
+ * See Documentation/admin-guide/pm/sleep-states.rst for a description of
+ * what they mean.
*
* store() accepts one of those strings, translates it into the proper
* enumerated value, and initiates a suspend transition.
^ permalink raw reply related
* [v6,7/7] arm: dts: ls1021a: add qdma device tree nodes
From: Wen He @ 2018-06-15 10:22 UTC (permalink / raw)
To: vkoul, dmaengine
Cc: robh+dt, devicetree, leoyang.li, jiafei.pan, jiaheng.fan,
wen.he_1
add the qDMA device tree nodes for LS1021A devices.
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
change in v6:
- no
arch/arm/boot/dts/ls1021a.dtsi | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..061c839 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -571,6 +571,21 @@
<&clockgen 4 1>;
};
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8398000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8399000 0x0 0x1000>, /* Status regs */
+ <0x0 0x839a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue";
+ dma-channels = <8>;
+ fsl,queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
dcu: dcu@2ce0000 {
compatible = "fsl,ls1021a-dcu";
reg = <0x0 0x2ce0000 0x0 0x10000>;
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox