* [PATCH] dmaengine: axi-dmac: change IRQ to threaded mode
@ 2026-11-17 6:01 Sergey Matsievskiy
2026-11-17 6:45 ` sashiko-bot
0 siblings, 1 reply; 2+ messages in thread
From: Sergey Matsievskiy @ 2026-11-17 6:01 UTC (permalink / raw)
To: dmaengine; +Cc: lars, vkoul, Frank.Li, linux-kernel, Sergey Matsievskiy
Threaded IRQ handlers run in a less critical context compared to normal
IRQs, so they can perform more complex and time-consuming operations
without causing significant delays in other parts of the kernel.
Additionally, regmap-irqchip requires child devices to handle IRQs in
threaded mode.
In this patch change IRQ to threaded mode for compatibility with
regmap-irqchip.
Switch spin_lock() to spin_lock_irqsave() in IRQ handler as it may be
interrupted in threaded mode. spin_lock_irqsave() prevents recursive
spinlock deadlock.
Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
---
drivers/dma/dma-axi-dmac.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index 98aaccd26a26..4a340e382e44 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -583,6 +583,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
{
struct axi_dmac *dmac = devid;
unsigned int pending;
+ unsigned long flags;
bool start_next = false;
pending = axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING);
@@ -591,7 +592,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_PENDING, pending);
- spin_lock(&dmac->chan.vchan.lock);
+ spin_lock_irqsave(&dmac->chan.vchan.lock, flags);
/* One or more transfers have finished */
if (pending & AXI_DMAC_IRQ_EOT) {
unsigned int completed;
@@ -602,7 +603,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
/* Space has become available in the descriptor queue */
if ((pending & AXI_DMAC_IRQ_SOT) || start_next)
axi_dmac_start_transfer(&dmac->chan);
- spin_unlock(&dmac->chan.vchan.lock);
+ spin_unlock_irqrestore(&dmac->chan.vchan.lock, flags);
return IRQ_HANDLED;
}
@@ -1324,8 +1325,10 @@ static int axi_dmac_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = devm_request_irq(&pdev->dev, dmac->irq, axi_dmac_interrupt_handler,
- IRQF_SHARED, dev_name(&pdev->dev), dmac);
+ ret = devm_request_threaded_irq(&pdev->dev, dmac->irq, NULL,
+ axi_dmac_interrupt_handler,
+ IRQF_SHARED | IRQF_ONESHOT,
+ dev_name(&pdev->dev), dmac);
if (ret)
return ret;
--
2.47.3
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] dmaengine: axi-dmac: change IRQ to threaded mode
2026-11-17 6:01 [PATCH] dmaengine: axi-dmac: change IRQ to threaded mode Sergey Matsievskiy
@ 2026-11-17 6:45 ` sashiko-bot
0 siblings, 0 replies; 2+ messages in thread
From: sashiko-bot @ 2026-11-17 6:45 UTC (permalink / raw)
To: Sergey Matsievskiy, dmaengine; +Cc: vkoul, Frank.Li
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] dmaengine: axi-dmac: threaded IRQ race with
axi_dmac_synchronize()
It also noticed 1 related pre-existing issue this patch does not
introduce:
- [High] dmaengine: dma-axi-dmac: cyclic desc use-after-free in
axi_dmac_terminate_all() [1]
--
commit fcedf11ce19d4d148f53f6d8bd9c6a0e04ee8801
Author: Sergey Matsievskiy <matsievskiysv@gmail.com>
dmaengine: axi-dmac: change IRQ to threaded mode
This commit converts axi_dmac_interrupt_handler() to a threaded interrupt
handler using devm_request_threaded_irq() and switches vchan.lock acquisition
in the handler to spin_lock_irqsave().
> diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
> index dbc31b185c4d4..c4b6f6ae6be8c 100644
> --- a/drivers/dma/dma-axi-dmac.c
> +++ b/drivers/dma/dma-axi-dmac.c
> @@ -582,6 +582,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
> {
> struct axi_dmac *dmac = devid;
> unsigned int pending;
> + unsigned long flags;
> bool start_next = false;
>
> pending = axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING);
> @@ -590,7 +591,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
>
> axi_dmac_write(dmac, AXI_DMAC_REG_IRQ_PENDING, pending);
>
> - spin_lock(&dmac->chan.vchan.lock);
> + spin_lock_irqsave(&dmac->chan.vchan.lock, flags);
> /* One or more transfers have finished */
> if (pending & AXI_DMAC_IRQ_EOT) {
> unsigned int completed;
[Severity: High]
This problem wasn't introduced by this patch, but can axi_dmac_terminate_all()
cause a use-after-free on the active cyclic descriptor [1] in
vchan_complete()?
CPU0 CPU1
axi_dmac_interrupt_handler()
axi_dmac_transfer_done()
vchan_cyclic_callback()
vc->cyclic = vd;
tasklet_schedule(&vc->task)
axi_dmac_terminate_all()
list_splice_tail_init(..., &head)
vchan_dma_desc_free_list(..., &head)
axi_dmac_desc_free()
vchan_complete()
vd = vc->cyclic;
dmaengine_desc_get_callback(&vd->tx, &cb) <-- use-after-free
axi_dmac_terminate_all() splices chan->active_descs into its free list and
frees the descriptors without calling vchan_terminate_vdesc(), leaving
vc->cyclic pointing to the freed axi_dmac_desc when the scheduled tasklet
runs.
> @@ -601,7 +602,7 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
> /* Space has become available in the descriptor queue */
> if ((pending & AXI_DMAC_IRQ_SOT) || start_next)
> axi_dmac_start_transfer(&dmac->chan);
> - spin_unlock(&dmac->chan.vchan.lock);
> + spin_unlock_irqrestore(&dmac->chan.vchan.lock, flags);
>
> return IRQ_HANDLED;
> }
> @@ -1317,8 +1318,10 @@ static int axi_dmac_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - ret = devm_request_irq(&pdev->dev, dmac->irq, axi_dmac_interrupt_handler,
> - IRQF_SHARED, dev_name(&pdev->dev), dmac);
> + ret = devm_request_threaded_irq(&pdev->dev, dmac->irq, NULL,
> + axi_dmac_interrupt_handler,
> + IRQF_SHARED | IRQF_ONESHOT,
> + dev_name(&pdev->dev), dmac);
[Severity: High]
Does moving axi_dmac_interrupt_handler() to a thread without updating
axi_dmac_synchronize() and axi_dmac_terminate_all() introduce a race with
channel termination and teardown?
axi_dmac_synchronize() only calls vchan_synchronize() (which kills the vchan
tasklet) and does not call synchronize_irq(dmac->irq), while
axi_dmac_interrupt_handler() reads and clears AXI_DMAC_REG_IRQ_PENDING before
acquiring dmac->chan.vchan.lock:
CPU0 (IRQ thread) CPU1
axi_dmac_interrupt_handler()
pending = axi_dmac_read(...)
axi_dmac_write(..., pending)
dmaengine_terminate_sync()
axi_dmac_terminate_all()
axi_dmac_synchronize()
vchan_synchronize()
axi_dmac_issue_pending()
axi_dmac_start_transfer()
spin_lock_irqsave(&vchan.lock)
axi_dmac_transfer_done()
list_del(&active->vdesc.node)
vchan_cookie_complete() <-- completes and frees new transfer
When an interrupt fires just before dmaengine_terminate_sync(), the woken IRQ
thread can run after a new transfer is issued and apply the stale
AXI_DMAC_IRQ_EOT to the new descriptor on chan->active_descs. In chan->hw_sg
mode, axi_dmac_transfer_done() unconditionally pops and completes the head of
chan->active_descs, freeing the descriptor and its chan->pool SG entries via
axi_dmac_desc_free() while DMA hardware is still using them.
Similarly, during dma_release_channel(), an in-flight IRQ thread can run after
vchan_synchronize() and schedule the vchan tasklet while
axi_dmac_free_chan_resources() is destroying chan->pool.
[1] https://sashiko.dev/#/bug/linux-b5d0e7ef-3ad0-4c97-9c79-1694077caf95
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261117060124.27914-1-matsievskiysv@gmail.com?part=1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-17 6:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-17 6:01 [PATCH] dmaengine: axi-dmac: change IRQ to threaded mode Sergey Matsievskiy
2026-11-17 6:45 ` sashiko-bot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox