From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
Chas Williams <3chas3@gmail.com>,
"Min Hu (Connor)" <humin29@huawei.com>
Subject: [PATCH v5 02/24] net/bonding: use stdatomic
Date: Fri, 19 Jun 2026 19:28:27 -0700 [thread overview]
Message-ID: <20260620023134.42877-3-stephen@networkplumber.org> (raw)
In-Reply-To: <20260620023134.42877-1-stephen@networkplumber.org>
The old rte_atomic16 and rte_atomic64 functions are deprecated.
Replace with rte_stdatomic for managing warning and timer flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/bonding/eth_bond_8023ad_private.h | 6 ++--
drivers/net/bonding/rte_eth_bond_8023ad.c | 35 ++++++++-----------
2 files changed, 17 insertions(+), 24 deletions(-)
diff --git a/drivers/net/bonding/eth_bond_8023ad_private.h b/drivers/net/bonding/eth_bond_8023ad_private.h
index ab7d15f81a..dd3cf3ed26 100644
--- a/drivers/net/bonding/eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/eth_bond_8023ad_private.h
@@ -9,7 +9,7 @@
#include <rte_ether.h>
#include <rte_byteorder.h>
-#include <rte_atomic.h>
+#include <rte_stdatomic.h>
#include <rte_flow.h>
#include "rte_eth_bond_8023ad.h"
@@ -140,10 +140,10 @@ struct port {
/** Timer which is also used as mutex. If is 0 (not running) RX marker
* packet might be responded. Otherwise shall be dropped. It is zeroed in
* mode 4 callback function after expire. */
- volatile uint64_t rx_marker_timer;
+ RTE_ATOMIC(uint64_t) rx_marker_timer;
uint64_t warning_timer;
- volatile uint16_t warnings_to_show;
+ RTE_ATOMIC(uint16_t) warnings_to_show;
/** Memory pool used to allocate slow queues */
struct rte_mempool *slow_pool;
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index ba88f6d261..cc7e4af2b9 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -171,27 +171,17 @@ timer_is_running(uint64_t *timer)
static void
set_warning_flags(struct port *port, uint16_t flags)
{
- int retval;
- uint16_t old;
- uint16_t new_flag = 0;
-
- do {
- old = port->warnings_to_show;
- new_flag = old | flags;
- retval = rte_atomic16_cmpset(&port->warnings_to_show, old, new_flag);
- } while (unlikely(retval == 0));
+ rte_atomic_fetch_or_explicit(&port->warnings_to_show, flags, rte_memory_order_relaxed);
}
static void
show_warnings(uint16_t member_id)
{
struct port *port = &bond_mode_8023ad_ports[member_id];
- uint8_t warnings;
-
- do {
- warnings = port->warnings_to_show;
- } while (rte_atomic16_cmpset(&port->warnings_to_show, warnings, 0) == 0);
+ uint16_t warnings;
+ warnings = rte_atomic_exchange_explicit(&port->warnings_to_show, 0,
+ rte_memory_order_relaxed);
if (!warnings)
return;
@@ -1337,7 +1327,6 @@ bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
struct port *port = &bond_mode_8023ad_ports[member_id];
struct marker_header *m_hdr;
uint64_t marker_timer, old_marker_timer;
- int retval;
uint8_t wrn, subtype;
/* If packet is a marker, we send response now by reusing given packet
* and update only source MAC, destination MAC is multicast so don't
@@ -1354,17 +1343,19 @@ bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
}
/* Setup marker timer. Do it in loop in case concurrent access. */
+ old_marker_timer = rte_atomic_load_explicit(&port->rx_marker_timer,
+ rte_memory_order_relaxed);
do {
- old_marker_timer = port->rx_marker_timer;
if (!timer_is_expired(&old_marker_timer)) {
wrn = WRN_RX_MARKER_TO_FAST;
goto free_out;
}
timer_set(&marker_timer, mode4->rx_marker_timeout);
- retval = rte_atomic64_cmpset(&port->rx_marker_timer,
- old_marker_timer, marker_timer);
- } while (unlikely(retval == 0));
+
+ } while (!rte_atomic_compare_exchange_weak_explicit(&port->rx_marker_timer,
+ &old_marker_timer, marker_timer,
+ rte_memory_order_seq_cst, rte_memory_order_relaxed));
m_hdr->marker.tlv_type_marker = MARKER_TLV_TYPE_RESP;
rte_eth_macaddr_get(member_id, &m_hdr->eth_hdr.src_addr);
@@ -1372,7 +1363,8 @@ bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
if (internals->mode4.dedicated_queues.enabled == 0) {
if (rte_ring_enqueue(port->tx_ring, pkt) != 0) {
/* reset timer */
- port->rx_marker_timer = 0;
+ rte_atomic_store_explicit(&port->rx_marker_timer, 0,
+ rte_memory_order_release);
wrn = WRN_TX_QUEUE_FULL;
goto free_out;
}
@@ -1386,7 +1378,8 @@ bond_mode_8023ad_handle_slow_pkt(struct bond_dev_private *internals,
&pkt, tx_count);
if (tx_count != 1) {
/* reset timer */
- port->rx_marker_timer = 0;
+ rte_atomic_store_explicit(&port->rx_marker_timer, 0,
+ rte_memory_order_release);
wrn = WRN_TX_QUEUE_FULL;
goto free_out;
}
--
2.53.0
next prev parent reply other threads:[~2026-06-20 2:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <https://inbox.dpdk.org/dev/20260521042043.1590536-1-stephen@networkplumber.org>
2026-06-20 2:28 ` [PATCH v5 00/24] deprecate rte_atomic functions Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 01/24] bpf: use C11 atomics in BPF_ST_ATOMIC_REG Stephen Hemminger
2026-06-20 2:28 ` Stephen Hemminger [this message]
2026-06-20 2:28 ` [PATCH v5 03/24] net/nbl: remove unused rte_atomic16 field Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 04/24] net/ena: replace use of rte_atomicNN Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 05/24] net/failsafe: convert to stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 06/24] net/enic: do not use deprecated rte_atomic64 Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 07/24] net/pfe: use ethdev linkstatus helpers Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 08/24] net/sfc: replace rte_atomic with stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 09/24] crypto/ccp: replace use of rte_atomic64 " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 10/24] bus/dpaa: replace rte_atomic16 " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 11/24] drivers: " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 12/24] net/netvsc: replace rte_atomic32 " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 13/24] event/sw: convert from rte_atomic32 to stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 14/24] bus/vmbus: convert from rte_atomic " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 15/24] common/dpaax: use stdatomic instead of rte_atomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 16/24] net/bnx2x: convert from rte_atomic32 to stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 17/24] bus/fslmc: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 18/24] drivers/event: replace rte_atomic32 in selftests Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 19/24] net/hinic: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 20/24] net/txgbe: " Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 21/24] net/vhost: use stdatomic instead of rte_atomic32 Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 22/24] vdpa/ifc: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 23/24] test/atomic: suppress deprecation warnings for legacy APIs Stephen Hemminger
2026-06-20 2:28 ` [PATCH v5 24/24] eal: deprecate rte_atomicNN functions Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260620023134.42877-3-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=3chas3@gmail.com \
--cc=dev@dpdk.org \
--cc=humin29@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox