DPDK-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	Jiawen Wu <jiawenwu@trustnetic.com>,
	Zaiyu Wang <zaiyuwang@trustnetic.com>
Subject: [PATCH v5 20/24] net/txgbe: replace rte_atomic32 with stdatomic
Date: Fri, 19 Jun 2026 19:28:45 -0700	[thread overview]
Message-ID: <20260620023134.42877-21-stephen@networkplumber.org> (raw)
In-Reply-To: <20260620023134.42877-1-stephen@networkplumber.org>

The swfw_busy flag guarding the AML SW-FW mailbox is a one-bit lock,
so convert it to RTE_ATOMIC(bool) and replace the legacy
test-and-set / clear pair with explicit acquire-release:

  rte_atomic32_test_and_set ->
      rte_atomic_exchange_explicit(.., true, acquire)
  rte_atomic32_clear        ->
      rte_atomic_store_explicit(.., false, release)

Acquire on the take pairs with release on the drop, so accesses
inside the critical section are synchronized between successive
holders. Default zero-initialization of struct txgbe_hw still
gives swfw_busy = false, so no init site needs updating.

Note:
The previous rte_atomic32_test_and_set return value was
inverted relative to what this code expected; this patch
incidentally corrects that. A standalone Fixes: patch is
queued in net-next.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/txgbe/base/txgbe_mng.c  | 4 ++--
 drivers/net/txgbe/base/txgbe_type.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/txgbe/base/txgbe_mng.c b/drivers/net/txgbe/base/txgbe_mng.c
index a1974820b6..c58e1d6589 100644
--- a/drivers/net/txgbe/base/txgbe_mng.c
+++ b/drivers/net/txgbe/base/txgbe_mng.c
@@ -185,7 +185,7 @@ txgbe_host_interface_command_aml(struct txgbe_hw *hw, u32 *buffer,
 	}
 
 	/* try to get lock */
-	while (rte_atomic32_test_and_set(&hw->swfw_busy)) {
+	while (rte_atomic_exchange_explicit(&hw->swfw_busy, true, rte_memory_order_acquire)) {
 		timeout--;
 		if (!timeout)
 			return TXGBE_ERR_TIMEOUT;
@@ -266,7 +266,7 @@ txgbe_host_interface_command_aml(struct txgbe_hw *hw, u32 *buffer,
 	/* index++, index replace txgbe_hic_hdr.checksum */
 	hw->swfw_index = resp->index == TXGBE_HIC_HDR_INDEX_MAX ?
 					0 : resp->index + 1;
-	rte_atomic32_clear(&hw->swfw_busy);
+	rte_atomic_store_explicit(&hw->swfw_busy, false, rte_memory_order_release);
 
 	return err;
 }
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index ede780321f..d3c82d51a4 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -880,7 +880,7 @@ struct txgbe_hw {
 	rte_spinlock_t phy_lock;
 	/*amlite: new SW-FW mbox */
 	u8 swfw_index;
-	rte_atomic32_t swfw_busy;
+	RTE_ATOMIC(bool) swfw_busy;
 	u32 fec_mode;
 	u32 cur_fec_link;
 };
-- 
2.53.0


  parent reply	other threads:[~2026-06-20  2:33 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <https://inbox.dpdk.org/dev/20260521042043.1590536-1-stephen@networkplumber.org>
2026-06-20  2:28 ` [PATCH v5 00/24] deprecate rte_atomic functions Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 01/24] bpf: use C11 atomics in BPF_ST_ATOMIC_REG Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 02/24] net/bonding: use stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 03/24] net/nbl: remove unused rte_atomic16 field Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 04/24] net/ena: replace use of rte_atomicNN Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 05/24] net/failsafe: convert to stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 06/24] net/enic: do not use deprecated rte_atomic64 Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 07/24] net/pfe: use ethdev linkstatus helpers Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 08/24] net/sfc: replace rte_atomic with stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 09/24] crypto/ccp: replace use of rte_atomic64 " Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 10/24] bus/dpaa: replace rte_atomic16 " Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 11/24] drivers: " Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 12/24] net/netvsc: replace rte_atomic32 " Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 13/24] event/sw: convert from rte_atomic32 to stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 14/24] bus/vmbus: convert from rte_atomic " Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 15/24] common/dpaax: use stdatomic instead of rte_atomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 16/24] net/bnx2x: convert from rte_atomic32 to stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 17/24] bus/fslmc: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 18/24] drivers/event: replace rte_atomic32 in selftests Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 19/24] net/hinic: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20  2:28   ` Stephen Hemminger [this message]
2026-06-20  2:28   ` [PATCH v5 21/24] net/vhost: use stdatomic instead of rte_atomic32 Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 22/24] vdpa/ifc: replace rte_atomic32 with stdatomic Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 23/24] test/atomic: suppress deprecation warnings for legacy APIs Stephen Hemminger
2026-06-20  2:28   ` [PATCH v5 24/24] eal: deprecate rte_atomicNN functions Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260620023134.42877-21-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=dev@dpdk.org \
    --cc=jiawenwu@trustnetic.com \
    --cc=zaiyuwang@trustnetic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox