[PATCH v3 00/14] net/enetc: add new features for ENETC4 VF on i.MX9

[Gagandeep Singh <g.singh@nxp.com>]

V3-changes:
 - fix doc build issue.
 - fix compilation issue on fedore:43-gcc-minsize

V2-changes:
 - compilation fixes.

V1-changes:
This series adds new PMD features to the ENETC4 driver targeting the
NXP i.MX95 NETC IP.

The series covers:

 - KEEP_CRC Rx offload: preserve the Ethernet FCS in the receive buffer.
 - TSO: TCP Segmentation Offload for the VF Tx path.
 - RSC/LRO: hardware Receive Segment Coalesce for PF and VF Rx paths.
 - Link speed code: extend the PF-to-VF mailbox field from 4-bit to
   8-bit to support speeds beyond 10G.
 - Firmware version: report the NETC IP version via fw_version_get.
 - Register dump: dump SI, port (PF) and BD ring registers.
 - Ring parameters: implement rxq_info_get / txq_info_get for the VF.
 - Link-up interrupt: refresh the cached link speed on each VF link-up
   interrupt so that link_update returns the current speed immediately.
 - Stats reset: software snapshot/delta approach for VF counter reset.
 - Per-queue Rx interrupt: MSI-X per-queue Rx interrupts for the VF,
   enabling interrupt-driven receive with l3fwd-power.
 - SI VLAN: hardware port VLAN insertion/removal for PF and VF.
 - VF link status bitmask: switch VF link status to bitmask encoding
   to align with the PF and newer kernel driver conventions.
 - TX PAUSE: VF sets Rx congestion mode when the PF signals TX PAUSE
   negotiated on the wire; adds Flow control = Y to enetc4.ini.
 - WRR Tx scheduler: per-ring WRR weights via enetc4_txq_wrr devarg.

Gagandeep Singh (14):
  net/enetc: add KEEP_CRC offload support for ENETC4
  net/enetc: add TSO support for ENETC4 VF
  net/enetc: add RSC (hardware LRO) support for ENETC4
  net/enetc: extend link speed code field to 8-bit for PF-to-VF message
  net/enetc: support firmware version get for VF
  net/enetc: support registers dump
  net/enetc: support ethtool ring parameters
  net/enetc: refresh link speed on VF link-up interrupt
  net/enetc: support stats reset for VF
  net/enetc4: add per-queue Rx interrupt support for VF
  net/enetc4: add SI-based port VLAN insertion and removal
  net/enetc4: update VF link status to bitmask encoding
  net/enetc4: enable TX PAUSE via VF RX congestion mode
  net/enetc4: add WRR Tx scheduler devarg for VF rings

 doc/guides/nics/enetc4.rst             |  81 ++-
 doc/guides/nics/features/enetc4.ini    |   8 +
 doc/guides/rel_notes/release_26_11.rst |  19 +
 drivers/net/enetc/base/enetc4_hw.h     | 129 +++-
 drivers/net/enetc/base/enetc_hw.h      |   6 +
 drivers/net/enetc/enetc.h              | 135 ++++-
 drivers/net/enetc/enetc4_ethdev.c      | 402 +++++++++++--
 drivers/net/enetc/enetc4_vf.c          | 779 ++++++++++++++++++++++---
 drivers/net/enetc/enetc_rxtx.c         | 529 ++++++++++++++++-
 9 files changed, 1942 insertions(+), 146 deletions(-)

-- 
2.25.1