From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org
Cc: hemant.agrawal@nxp.com, Gagandeep Singh <g.singh@nxp.com>
Subject: [PATCH v3 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings
Date: Fri, 7 Aug 2026 12:32:41 +0530 [thread overview]
Message-ID: <20260807070241.1151161-15-g.singh@nxp.com> (raw)
In-Reply-To: <20260807070241.1151161-1-g.singh@nxp.com>
Add enetc4_txq_wrr devarg to configure per-ring WRR weights in the
NETC LEAF-level Tx scheduler (TBaMR register, bits [6:4]).
The NETC Tx scheduler has three levels:
- ROOT (port/TC): strict priority + CBS (PF/port space)
- MID (SI/VSI): WBFS shaping (PF space)
- LEAF (Tx BDR): strict priority + frame-based WRR (VF/SI space)
TBaMR is in the VF own SI space, so no Linux PF involvement is
needed for PRIO or WRR configuration.
Changes:
- enetc_hw.h: add ENETC_TBMR_WRR_MASK, ENETC_TBMR_WRR(n) macros for
TBaMR bits [6:4], and ENETC_TBMR_PRIO_MASK for bits [2:0]
- enetc.h: add txq_wrr pointer to enetc_eth_hw struct
- enetc4_ethdev.c: add parse_txq_wrr() and wire ENETC4_TXQ_WRR devarg
through enetc4_get_devargs() and enetc4_dev_configure(); apply WRR
bits in enetc4_tx_queue_setup() and enetc4_tx_queue_start()
Usage:
# strict priority: ring 0 highest
-a 0002:00:12.0,enetc4_txq_prior="3|2|1"
# WRR 2:4:1 on same-priority rings
-a 0002:00:12.0,enetc4_txq_prior="1|1|1",enetc4_txq_wrr="2|4|1"
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
doc/guides/rel_notes/release_26_11.rst | 1 +
drivers/net/enetc/base/enetc_hw.h | 5 ++
drivers/net/enetc/enetc.h | 1 +
drivers/net/enetc/enetc4_ethdev.c | 97 ++++++++++++++++++++------
4 files changed, 82 insertions(+), 22 deletions(-)
diff --git a/doc/guides/rel_notes/release_26_11.rst b/doc/guides/rel_notes/release_26_11.rst
index d69888aafb..3ea34523fe 100644
--- a/doc/guides/rel_notes/release_26_11.rst
+++ b/doc/guides/rel_notes/release_26_11.rst
@@ -73,6 +73,7 @@ New Features
* Added SI-based port VLAN insertion (Tx) and removal (Rx) for ENETC4 PF and VF.
* Updated ENETC4 VF link status reporting to use bitmask encoding.
* Added TX PAUSE support for the ENETC4 VF via RX congestion mode.
+ * Added WRR Tx scheduler devarg (``enetc4_txq_wrr``) for ENETC4 VF ring weights.
Removed Items
-------------
diff --git a/drivers/net/enetc/base/enetc_hw.h b/drivers/net/enetc/base/enetc_hw.h
index 33d075fe59..5a71f01db9 100644
--- a/drivers/net/enetc/base/enetc_hw.h
+++ b/drivers/net/enetc/base/enetc_hw.h
@@ -86,6 +86,11 @@ enum enetc_bdr_type {TX, RX};
#define ENETC_RTBLENR_LEN(n) ((n) & ~0x7)
#define ENETC_TBMR_EN BIT(31)
+/* TBaMR[WRR] bits [6:4]: weight for same-priority ring arbitration (0=1x .. 7=8x). */
+#define ENETC_TBMR_WRR_MASK GENMASK(6, 4)
+#define ENETC_TBMR_WRR(n) ((((n) - 1) & 0x7) << 4)
+/* TBaMR[PRIO] bits [2:0]: strict priority (0=lowest, 7=highest). */
+#define ENETC_TBMR_PRIO_MASK GENMASK(2, 0)
/* Port regs, offset: 1_0000h */
#define ENETC_PORT_BASE 0x10000
diff --git a/drivers/net/enetc/enetc.h b/drivers/net/enetc/enetc.h
index 8aaf8a7eb1..e0943d093a 100644
--- a/drivers/net/enetc/enetc.h
+++ b/drivers/net/enetc/enetc.h
@@ -134,6 +134,7 @@ struct enetc_eth_hw {
uint32_t vsi_timeout; /* VSI-PSI message wait timeout (iterations) */
uint32_t vsi_delay; /* VSI-PSI message wait delay (us) */
uint32_t *txq_prior; /* per-queue TX priority (TBMR priority bits) */
+ uint32_t *txq_wrr; /* per-queue TX WRR weight pre-shifted for TBMR[WRR] */
uint8_t nc_mode; /* 1 = non-cacheable BD memory, use _nc ops */
uint8_t rxq_intr_en; /* 1 = per-queue Rx MSI-X interrupts enabled */
/* 1 = legacy PF-to-VF link message layout (4-bit speed / 4-bit cookie),
diff --git a/drivers/net/enetc/enetc4_ethdev.c b/drivers/net/enetc/enetc4_ethdev.c
index 2355522515..e490ecaf4c 100644
--- a/drivers/net/enetc/enetc4_ethdev.c
+++ b/drivers/net/enetc/enetc4_ethdev.c
@@ -28,22 +28,26 @@ static uint64_t dev_tx_offloads_sup =
RTE_ETH_TX_OFFLOAD_UDP_TSO;
#define ENETC4_TXQ_PRIORITIES "enetc4_txq_prior"
+#define ENETC4_TXQ_WRR "enetc4_txq_wrr"
#define ENETC4_NC_MEMORY "nc"
+
static int
parse_txq_prior(const char *key __rte_unused, const char *value, void *opaque)
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)opaque;
struct enetc_eth_hw *hw =
- ENETC_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- char *input_str = strdup(value);
+ ENETC_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ char *input_str;
char *str;
uint32_t i = 0;
+ input_str = strdup(value);
if (!input_str)
- return -ENOMEM;
+ return -1;
- hw->txq_prior = calloc(hw->max_tx_queues, sizeof(uint32_t));
+ rte_free(hw->txq_prior);
+ hw->txq_prior = rte_zmalloc(NULL, hw->max_tx_queues * sizeof(uint32_t), 0);
if (!hw->txq_prior) {
free(input_str);
return -ENOMEM;
@@ -51,7 +55,46 @@ parse_txq_prior(const char *key __rte_unused, const char *value, void *opaque)
str = strtok(input_str, "|");
while (str != NULL && i < hw->max_tx_queues) {
- hw->txq_prior[i++] = (uint32_t)atoi(str);
+ hw->txq_prior[i++] = atoi(str) & ENETC_TBMR_PRIO_MASK;
+ str = strtok(NULL, "|");
+ }
+
+ free(input_str);
+ return 0;
+}
+
+/* Parse enetc4_txq_wrr="w0|w1|..." devarg; weight 1..8 per ring. */
+static int parse_txq_wrr(const char *key __rte_unused, const char *value,
+ void *opaque)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)opaque;
+ struct enetc_eth_hw *hw =
+ ENETC_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ char *input_str;
+ char *str;
+ uint32_t i = 0;
+ int w;
+
+ input_str = strdup(value);
+ if (!input_str)
+ return -1;
+
+ rte_free(hw->txq_wrr);
+ hw->txq_wrr = rte_zmalloc(NULL,
+ hw->max_tx_queues * sizeof(uint32_t), 0);
+ if (!hw->txq_wrr) {
+ free(input_str);
+ return -1;
+ }
+
+ str = strtok(input_str, "|");
+ while (str != NULL && i < hw->max_tx_queues) {
+ w = atoi(str);
+ if (w < 1)
+ w = 1;
+ if (w > 8)
+ w = 8;
+ hw->txq_wrr[i++] = ENETC_TBMR_WRR(w);
str = strtok(NULL, "|");
}
@@ -97,6 +140,13 @@ enetc4_get_devargs(struct rte_eth_dev *dev, const char *key)
return 0;
}
}
+ if (!strcmp(key, ENETC4_TXQ_WRR)) {
+ if (rte_kvargs_process(kvlist, key,
+ parse_txq_wrr, (void *)dev) < 0) {
+ rte_kvargs_free(kvlist);
+ return 0;
+ }
+ }
if (!strcmp(key, ENETC4_NC_MEMORY)) {
if (rte_kvargs_process(kvlist, key,
parse_nc, (void *)dev) < 0) {
@@ -109,19 +159,6 @@ enetc4_get_devargs(struct rte_eth_dev *dev, const char *key)
return 0;
}
-/* Supported Rx offloads */
-static uint64_t dev_rx_offloads_sup =
- RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
- RTE_ETH_RX_OFFLOAD_UDP_CKSUM |
- RTE_ETH_RX_OFFLOAD_TCP_CKSUM |
- RTE_ETH_RX_OFFLOAD_SCATTER;
-
-/* Supported Tx offloads */
-static uint64_t dev_tx_offloads_sup =
- RTE_ETH_TX_OFFLOAD_IPV4_CKSUM |
- RTE_ETH_TX_OFFLOAD_UDP_CKSUM |
- RTE_ETH_TX_OFFLOAD_TCP_CKSUM |
- RTE_ETH_TX_OFFLOAD_MULTI_SEGS;
static int
enetc4_dev_start(struct rte_eth_dev *dev)
@@ -458,7 +495,9 @@ enetc4_tx_queue_setup(struct rte_eth_dev *dev,
/* apply TX queue priority if configured */
if (priv->hw.txq_prior)
- tx_en |= priv->hw.txq_prior[tx_ring->index];
+ tx_data |= priv->hw.txq_prior[tx_ring->index];
+ if (priv->hw.txq_wrr)
+ tx_data |= priv->hw.txq_wrr[tx_ring->index];
/* enable ring */
enetc4_txbdr_wr(&priv->hw.hw, tx_ring->index,
ENETC_TBMR, tx_en);
@@ -613,7 +652,6 @@ enetc4_rx_queue_setup(struct rte_eth_dev *dev,
struct enetc_eth_adapter *adapter =
ENETC_DEV_PRIVATE(data->dev_private);
uint64_t rx_offloads = data->dev_conf.rxmode.offloads;
- uint32_t rx_enable;
uint32_t rsc_size;
bool keep_crc;
bool rsc_enable;
@@ -869,7 +907,10 @@ enetc4_dev_close(struct rte_eth_dev *dev)
dev->data->tx_queues[i] = NULL;
}
dev->data->nb_tx_queues = 0;
-
+ rte_free(hw->txq_prior);
+ hw->txq_prior = NULL;
+ rte_free(hw->txq_wrr);
+ hw->txq_wrr = NULL;
if (rte_eal_iova_mode() == RTE_IOVA_PA)
dpaax_iova_table_depopulate();
@@ -1020,6 +1061,11 @@ enetc4_dev_configure(struct rte_eth_dev *dev)
for (i = 0; i < dev->data->nb_tx_queues; i++)
enetc4_rxbdr_wr(enetc_hw, i, ENETC_TBMR, ENETC_BMR_RESET);
+ hw->nc_mode = 0;
+ enetc4_get_devargs(dev, ENETC4_TXQ_PRIORITIES);
+ enetc4_get_devargs(dev, ENETC4_TXQ_WRR);
+ enetc4_get_devargs(dev, ENETC4_NC_MEMORY);
+
if (dev->data->nb_rx_queues <= 1)
return 0;
@@ -1142,7 +1188,13 @@ enetc4_tx_queue_start(struct rte_eth_dev *dev, uint16_t qidx)
if (dev->data->tx_queue_state[qidx] == RTE_ETH_QUEUE_STATE_STOPPED) {
tx_data = enetc4_txbdr_rd(&priv->hw.hw, tx_ring->index,
ENETC_TBMR);
- tx_data = tx_data | ENETC_TBMR_EN;
+ /* Clear scheduler bits before applying fresh devarg values. */
+ tx_data &= ~(ENETC_TBMR_PRIO_MASK | ENETC_TBMR_WRR_MASK);
+ tx_data |= ENETC_TBMR_EN;
+ if (priv->hw.txq_prior)
+ tx_data |= priv->hw.txq_prior[tx_ring->index];
+ if (priv->hw.txq_wrr)
+ tx_data |= priv->hw.txq_wrr[tx_ring->index];
enetc4_txbdr_wr(&priv->hw.hw, tx_ring->index, ENETC_TBMR,
tx_data);
dev->data->tx_queue_state[qidx] = RTE_ETH_QUEUE_STATE_STARTED;
@@ -1457,5 +1509,6 @@ RTE_PMD_REGISTER_PCI_TABLE(net_enetc4, pci_id_enetc4_map);
RTE_PMD_REGISTER_KMOD_DEP(net_enetc4, "* vfio-pci");
RTE_PMD_REGISTER_PARAM_STRING(net_enetc4,
ENETC4_TXQ_PRIORITIES "=<string> "
+ ENETC4_TXQ_WRR "=<string> "
ENETC4_NC_MEMORY "=<int>");
RTE_LOG_REGISTER_DEFAULT(enetc4_logtype_pmd, NOTICE);
--
2.25.1
next prev parent reply other threads:[~2026-08-07 7:04 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 11:28 [PATCH 00/14] net/enetc: add new features for ENETC4 VF on i.MX95 Gagandeep Singh
2026-08-06 11:28 ` [PATCH 01/14] net/enetc: add KEEP_CRC offload support for ENETC4 Gagandeep Singh
2026-08-06 11:28 ` [PATCH 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-06 11:28 ` [PATCH 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-06 11:28 ` [PATCH 04/14] net/enetc: extend link speed code field to 8-bit for PF-to-VF message Gagandeep Singh
2026-08-06 11:28 ` [PATCH 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-06 11:28 ` [PATCH 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-06 11:28 ` [PATCH 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-06 11:28 ` [PATCH 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-06 11:28 ` [PATCH 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-06 11:28 ` [PATCH 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-06 11:28 ` [PATCH 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-06 11:28 ` [PATCH 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-06 11:28 ` [PATCH 13/14] net/enetc4: enable TX PAUSE via VF RX congestion mode Gagandeep Singh
2026-08-06 11:28 ` [PATCH 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings Gagandeep Singh
2026-08-06 17:00 ` [PATCH 00/14] net/enetc: add new features for ENETC4 VF on i.MX95 Stephen Hemminger
2026-08-07 3:48 ` [PATCH v2 00/14] net/enetc: add new features for ENETC4 VF on i.MX9 Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 01/14] net/enetc: add KEEP_CRC offload support for ENETC4 Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 04/14] net/enetc: extend link speed code field to 8-bit for PF-to-VF message Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 13/14] net/enetc4: enable TX PAUSE via VF RX congestion mode Gagandeep Singh
2026-08-07 3:48 ` [PATCH v2 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 00/14] net/enetc: add new features for ENETC4 VF on i.MX9 Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 01/14] net/enetc: add KEEP_CRC offload support for ENETC4 Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 04/14] net/enetc: extend link speed code field to 8-bit for PF-to-VF message Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-07 7:02 ` [PATCH v3 13/14] net/enetc4: enable TX PAUSE via VF RX congestion mode Gagandeep Singh
2026-08-07 7:02 ` Gagandeep Singh [this message]
2026-08-07 11:26 ` [PATCH v4 00/14] net/enetc: add new features for ENETC4 on i.MX95 Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 01/14] net/enetc: add KEEP_CRC offload support for ENETC4 Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 04/14] net/enetc: extend link speed code field to 8-bit for PF-to-VF message Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 13/14] net/enetc4: enable TX PAUSE via VF RX congestion mode Gagandeep Singh
2026-08-07 11:26 ` [PATCH v4 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings Gagandeep Singh
2026-08-09 21:00 ` [PATCH v4 00/14] net/enetc: add new features for ENETC4 on i.MX95 Stephen Hemminger
2026-08-10 10:58 ` Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 " Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 01/14] net/enetc: add keep-CRC Rx offload for ENETC4 Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 04/14] net/enetc: extend PF-VF link speed field to 8 bits Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 13/14] net/enetc4: enable Tx PAUSE via VF Rx congestion mode Gagandeep Singh
2026-08-10 10:48 ` [PATCH v5 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings Gagandeep Singh
2026-08-10 15:25 ` [PATCH v5 00/14] net/enetc: add new features for ENETC4 on i.MX95 Stephen Hemminger
2026-08-10 15:40 ` Stephen Hemminger
2026-08-11 7:40 ` [PATCH v6 00/13] " Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 01/13] net/enetc: add keep-CRC Rx offload for ENETC4 Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 02/13] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 03/13] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 04/13] net/enetc: extend PF-VF link speed field to 8 bits Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 05/13] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 06/13] net/enetc: support registers dump Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 07/13] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 08/13] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 09/13] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 10/13] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 11/13] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 12/13] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-11 7:40 ` [PATCH v6 13/13] net/enetc4: enable Tx PAUSE via VF Rx congestion mode Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 00/14] net/enetc: add new features for ENETC4 on i.MX95 Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 01/14] net/enetc: add keep-CRC Rx offload for ENETC4 Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 02/14] net/enetc: add TSO support for ENETC4 VF Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 03/14] net/enetc: add RSC (hardware LRO) support for ENETC4 Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 04/14] net/enetc: extend PF-VF link speed field to 8 bits Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 05/14] net/enetc: support firmware version get for VF Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 06/14] net/enetc: support registers dump Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 07/14] net/enetc: support ethtool ring parameters Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 08/14] net/enetc: refresh link speed on VF link-up interrupt Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 09/14] net/enetc: support stats reset for VF Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 10/14] net/enetc4: add per-queue Rx interrupt support " Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 11/14] net/enetc4: add SI-based port VLAN insertion and removal Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 12/14] net/enetc4: update VF link status to bitmask encoding Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 13/14] net/enetc4: enable Tx PAUSE via VF Rx congestion mode Gagandeep Singh
2026-08-11 7:47 ` [PATCH v7 14/14] net/enetc4: add WRR Tx scheduler devarg for VF rings Gagandeep Singh
2026-08-11 15:39 ` [PATCH v7 00/14] net/enetc: add new features for ENETC4 on i.MX95 Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807070241.1151161-15-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox