From: Joshua Washington <joshwash@google.com>
To: Joshua Washington <joshwash@google.com>
Cc: dev@dpdk.org, Mark Blasko <blasko@google.com>
Subject: [PATCH 8/8] net/gve: refactor timestamp support to clock read type
Date: Fri, 2 Oct 2026 19:51:40 -0700 [thread overview]
Message-ID: <20261003025142.1930363-9-joshwash@google.com> (raw)
In-Reply-To: <20261003025142.1930363-1-joshwash@google.com>
From: Mark Blasko <blasko@google.com>
Replace the boolean nic_timestamp_supported field with enum
gve_dev_clk_type to represent the device clock read mode
(unsupported, Cmd). Update AdminQ capability negotiation
and ethdev operations to check clk_read_type.
Signed-off-by: Mark Blasko <blasko@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
---
drivers/net/gve/base/gve_adminq.c | 5 +++--
drivers/net/gve/gve_ethdev.c | 9 ++++++---
drivers/net/gve/gve_ethdev.h | 7 ++++++-
3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/net/gve/base/gve_adminq.c b/drivers/net/gve/base/gve_adminq.c
index 60e8544ef4..6fd9323f0c 100644
--- a/drivers/net/gve/base/gve_adminq.c
+++ b/drivers/net/gve/base/gve_adminq.c
@@ -994,9 +994,10 @@ static void gve_enable_supported_features(struct gve_priv *priv,
priv->max_mtu = be16_to_cpu(dev_op_jumbo_frames->max_mtu);
}
if (dev_op_nic_timestamp &&
- (supported_features_mask & GVE_SUP_NIC_TIMESTAMP_MASK)) {
+ (supported_features_mask & GVE_SUP_NIC_TIMESTAMP_MASK) &&
+ !gve_is_gqi(priv)) {
PMD_DRV_LOG(INFO, "NIC TIMESTAMP device option enabled.");
- priv->nic_timestamp_supported = true;
+ priv->clk_read_type = GVE_DEV_CLK_CMD;
}
}
diff --git a/drivers/net/gve/gve_ethdev.c b/drivers/net/gve/gve_ethdev.c
index 5a2f95ae19..a1deadc8ba 100644
--- a/drivers/net/gve/gve_ethdev.c
+++ b/drivers/net/gve/gve_ethdev.c
@@ -554,6 +554,9 @@ gve_alloc_nic_ts_report(struct gve_priv *priv)
{
char z_name[RTE_MEMZONE_NAMESIZE];
+ if (priv->clk_read_type == GVE_DEV_CLK_UNSUPPORTED)
+ return -EOPNOTSUPP;
+
snprintf(z_name, sizeof(z_name), "gve_%s_nic_ts_report",
priv->pci_dev->device.name);
priv->nic_ts_report_mz = rte_memzone_reserve_aligned(z_name,
@@ -865,7 +868,7 @@ gve_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
dev_info->min_mtu = RTE_ETHER_MIN_MTU;
dev_info->rx_offload_capa = RTE_ETH_RX_OFFLOAD_RSS_HASH;
- if (!gve_is_gqi(priv) && priv->nic_ts_report_mz)
+ if (priv->clk_read_type != GVE_DEV_CLK_UNSUPPORTED)
dev_info->rx_offload_capa |= RTE_ETH_RX_OFFLOAD_TIMESTAMP;
dev_info->tx_offload_capa =
RTE_ETH_TX_OFFLOAD_MULTI_SEGS |
@@ -1342,7 +1345,7 @@ gve_read_clock(struct rte_eth_dev *dev, uint64_t *clock)
uint64_t ts;
int err;
- if (!priv->nic_timestamp_supported)
+ if (priv->clk_read_type == GVE_DEV_CLK_UNSUPPORTED)
return -EOPNOTSUPP;
if (!priv->nic_ts_report_mz)
@@ -1443,7 +1446,7 @@ gve_setup_nic_timestamp(struct gve_priv *priv)
{
int err;
- if (!priv->nic_timestamp_supported)
+ if (priv->clk_read_type == GVE_DEV_CLK_UNSUPPORTED)
return;
rte_atomic_store_explicit(&priv->nic_ts_read_fails, 0, rte_memory_order_relaxed);
diff --git a/drivers/net/gve/gve_ethdev.h b/drivers/net/gve/gve_ethdev.h
index ef93db0c1d..21454802f9 100644
--- a/drivers/net/gve/gve_ethdev.h
+++ b/drivers/net/gve/gve_ethdev.h
@@ -274,6 +274,11 @@ extern const struct rte_flow_ops gve_flow_ops;
struct gve_priv;
struct gve_flow_rule_params;
+enum gve_dev_clk_type {
+ GVE_DEV_CLK_UNSUPPORTED = 0,
+ GVE_DEV_CLK_CMD,
+};
+
struct gve_ctrl_ops {
int (*init_ctrl_plane)(struct gve_priv *priv);
void (*free_ctrl_plane)(struct gve_priv *priv);
@@ -411,7 +416,7 @@ struct gve_priv {
TAILQ_HEAD(, gve_flow) active_flows;
/* HW Timestamping Fields */
- bool nic_timestamp_supported;
+ enum gve_dev_clk_type clk_read_type;
const struct rte_memzone *nic_ts_report_mz;
struct gve_nic_ts_report *nic_ts_report;
pthread_mutex_t nic_ts_lock;
--
2.56.0.rc1.315.gc6ed9934b7-goog
next prev parent reply other threads:[~2026-10-03 2:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-03 2:51 [PATCH 0/8] gve: precursor control plane changes before bare-metal support Joshua Washington
2026-10-03 2:51 ` [PATCH 1/8] net/gve: refactor ethdev for control ops interface Joshua Washington
2026-10-03 2:51 ` [PATCH 2/8] net/gve: rename doorbell BAR variable to be more generic Joshua Washington
2026-10-03 2:51 ` [PATCH 3/8] net/gve: split default queue counts into Tx and Rx Joshua Washington
2026-10-03 2:51 ` [PATCH 4/8] net/gve: clean Tx queue directly in dqo Joshua Washington
2026-10-03 2:51 ` [PATCH 5/8] net/gve: update RSS config just after successful programming Joshua Washington
2026-10-03 2:51 ` [PATCH 6/8] net/gve: add RSS cache boolean flag Joshua Washington
2026-10-03 2:51 ` [PATCH 7/8] net/gve: fix RSS config memory leak on close Joshua Washington
2026-10-03 2:51 ` Joshua Washington [this message]
2026-10-03 16:29 ` [PATCH 0/8] gve: precursor control plane changes before bare-metal support Stephen Hemminger
2026-10-05 19:39 ` [PATCH v2 " Joshua Washington
2026-10-05 19:39 ` [PATCH v2 1/8] net/gve: refactor ethdev for control ops interface Joshua Washington
2026-10-05 19:39 ` [PATCH v2 2/8] net/gve: rename doorbell BAR variable to be more generic Joshua Washington
2026-10-05 19:39 ` [PATCH v2 3/8] net/gve: split default queue counts into Tx and Rx Joshua Washington
2026-10-05 19:39 ` [PATCH v2 4/8] net/gve: clean Tx queue directly in dqo Joshua Washington
2026-10-05 19:39 ` [PATCH v2 5/8] net/gve: update RSS config just after successful programming Joshua Washington
2026-10-05 19:39 ` [PATCH v2 6/8] net/gve: add RSS cache boolean flag Joshua Washington
2026-10-05 19:39 ` [PATCH v2 7/8] net/gve: fix RSS config memory leak on close Joshua Washington
2026-10-05 19:39 ` [PATCH v2 8/8] net/gve: refactor timestamp support to clock read type Joshua Washington
2026-10-06 14:19 ` [PATCH v2 0/8] gve: precursor control plane changes before bare-metal support Stephen Hemminger
2026-10-06 15:10 ` Stephen Hemminger
2026-10-07 20:11 ` Joshua Washington
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261003025142.1930363-9-joshwash@google.com \
--to=joshwash@google.com \
--cc=blasko@google.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox