dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] app/test-pmd: use burst IO for IEEE1588 forwarding
@ 2026-11-18 15:11 Bruce Richardson
  0 siblings, 0 replies; only message in thread
From: Bruce Richardson @ 2026-11-18 15:11 UTC (permalink / raw)
  To: dev; +Cc: Bruce Richardson, stable, Aman Singh

The IEEE1588 forwarder in test-pmd read a single packet at a time rather
than using the burst size configuration parameter. This meant that it
cannot be used with vector driver paths which require a minimum burst
size for calling the Rx function.

Make the forwarding function respect the configured burst size and only
process packets one at a time, not Rx them one-at-a-time.

Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 app/test-pmd/ieee1588fwd.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/app/test-pmd/ieee1588fwd.c b/app/test-pmd/ieee1588fwd.c
index afea7735c7..5b97ddc41b 100644
--- a/app/test-pmd/ieee1588fwd.c
+++ b/app/test-pmd/ieee1588fwd.c
@@ -34,10 +34,10 @@ struct ptpv2_msg {
 /*
  * Forwarding of IEEE1588 Precise Time Protocol (PTP) packets.
  *
- * In this mode, packets are received one by one and are expected to be
- * PTP V2 L2 Ethernet frames (with the specific Ethernet type "0x88F7")
- * containing PTP "sync" messages (version 2 at offset 1, and message ID
- * 0 at offset 0).
+ * In this mode, packets are received in bursts and processed one by one.
+ * They are expected to be PTP V2 L2 Ethernet frames (with the specific
+ * Ethernet type "0x88F7") containing PTP "sync" messages (version 2 at
+ * offset 1, and message ID 0 at offset 0).
  *
  * Check that each received packet is a IEEE1588 PTP V2 packet of type
  * PTP_SYNC_MESSAGE, and that it has been identified and timestamped
@@ -90,21 +90,14 @@ port_ieee1588_tx_timestamp_check(portid_t pi)
 }
 
 static bool
-ieee1588_packet_fwd(struct fwd_stream *fs)
+ieee1588_process_packet(struct fwd_stream *fs, struct rte_mbuf *mb)
 {
-	struct rte_mbuf  *mb;
 	struct rte_ether_hdr *eth_hdr;
 	struct rte_ether_addr addr;
 	struct ptpv2_msg *ptp_hdr;
 	uint16_t eth_type;
 	uint32_t timesync_index;
 
-	/*
-	 * Receive 1 packet at a time.
-	 */
-	if (common_fwd_stream_receive(fs, &mb, 1) == 0)
-		return false;
-
 	/*
 	 * Check that the received packet is a PTP packet that was detected
 	 * by the hardware.
@@ -194,6 +187,20 @@ ieee1588_packet_fwd(struct fwd_stream *fs)
 	return true;
 }
 
+static bool
+ieee1588_packet_fwd(struct fwd_stream *fs)
+{
+	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+	bool fwd = false;
+
+	const uint16_t nb_rx = common_fwd_stream_receive(fs, pkts_burst, nb_pkt_per_burst);
+	for (uint16_t i = 0; i < nb_rx; i++)
+		if (ieee1588_process_packet(fs, pkts_burst[i]))
+			fwd = true;
+
+	return fwd;
+}
+
 static int
 port_ieee1588_fwd_begin(portid_t pi)
 {
-- 
2.55.0


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2026-11-18 15:13 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-18 15:11 [PATCH] app/test-pmd: use burst IO for IEEE1588 forwarding Bruce Richardson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).