[PATCH v1 0/2] few improvemnts for SORING lib

[PATCH v1 0/2] few improvemnts for SORING lib

[Konstantin Ananyev]

First patch aims to improve enqueue/dequeue performance, specially
for the cases with multiple stage workers lcores.
Second one introduces 'Peek API' similar to what we have for
conventional rte_ring. Also it adds new test-cases for this new API.

Konstantin Ananyev (2):
  ring: make soring to finalize its own stage only
  ring: introduce peek API for soring

 app/test/meson.build               |   1 +
 app/test/test_soring_mt_stress.c   |  74 ++++++++
 app/test/test_soring_peek_stress.c |  75 ++++++++
 app/test/test_soring_stress.c      |   3 +
 app/test/test_soring_stress.h      |   1 +
 app/test/test_soring_stress_impl.h |  87 +--------
 lib/ring/rte_soring.h              | 264 ++++++++++++++++++++++++++
 lib/ring/soring.c                  | 289 +++++++++++++++++++++++------
 8 files changed, 661 insertions(+), 133 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

-- 
2.51.0

[PATCH v1 1/2] ring: make soring to finalize its own stage only

[Konstantin Ananyev]

While finalize() is MT-safe and can be called from multiple places:
from 'acquire()' for next stage or even from consumer's 'dequeue(),
doing so usually creates extra un-necessary contention and might
slow-down ring operations, especially for the cases when we have
multiple threads doing acquire/release for some stage.
Things become worse when we have single producer/consumer and multiple
workers doing acquire/release for the same ring.
So instead of calling finalize() from different places, just make
release() for given stage to always try to perform it.

Accorging to the soring_stress_autotest, for multiple workers (8+)
it reduces number of cycles spent by 1.5x-2.0x factor.
For l3fwd-like workload it improves things by ~20%.
For small number of workers didn't observe any serious change.
As another benefit - it allows to simplify the code.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 lib/ring/soring.c | 52 ++++++++---------------------------------------
 1 file changed, 9 insertions(+), 43 deletions(-)

diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 3b90521bdb..fc7fc55a21 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -50,10 +50,8 @@
  * from current stage tail up to its head, check state[] and move stage tail
  * through elements that already are in SORING_ST_FINISH state.
  * Along with that, corresponding state[] values are reset to zero.
- * Note that 'finalize()' for given stage can be done from multiple places:
- * 'release()' for that stage or from 'acquire()' for next stage
- * even from consumer's 'dequeue()' - in case given stage is the last one.
- * So 'finalize()' has to be MT-safe and inside it we have to
+ * Note that 'finalize()' for given stage can be called from multiple threads
+ * in parallel, so 'finalize()' has to be MT-safe and inside it we have to
  * guarantee that only one thread will update state[] and stage's tail values.
  */
 
@@ -284,7 +282,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t *available)
 {
 	enum rte_ring_sync_type st;
-	uint32_t entries, cons_head, cons_next, n, ns, reqn;
+	uint32_t entries, cons_head, cons_next, n, ns;
 
 	RTE_ASSERT(r != NULL && r->nb_stage > 0);
 	RTE_ASSERT(meta == NULL || r->meta != NULL);
@@ -293,22 +291,8 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	st = r->cons.ht.sync_type;
 
 	/* try to grab exactly @num elems first */
-	n = __rte_soring_move_cons_head(r, ns, num, RTE_RING_QUEUE_FIXED, st,
+	n = __rte_soring_move_cons_head(r, ns, num, behavior, st,
 			&cons_head, &cons_next, &entries);
-	if (n == 0) {
-		/* try to finalize some elems from previous stage */
-		n = __rte_soring_stage_finalize(&r->stage[ns].sht, ns,
-			r->state, r->mask, 2 * num);
-		entries += n;
-
-		/* repeat attempt to grab elems */
-		reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-		if (entries >= reqn)
-			n = __rte_soring_move_cons_head(r, ns, num, behavior,
-				st, &cons_head, &cons_next, &entries);
-		else
-			n = 0;
-	}
 
 	/* we have some elems to consume */
 	if (n != 0) {
@@ -382,7 +366,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 	uint32_t stage, uint32_t num, enum rte_ring_queue_behavior behavior,
 	uint32_t *ftoken, uint32_t *available)
 {
-	uint32_t avail, head, idx, n, next, reqn;
+	uint32_t avail, head, idx, n, next;
 	struct soring_stage *pstg;
 	struct soring_stage_headtail *cons;
 
@@ -399,22 +383,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 
 		/* try to grab exactly @num elems */
 		n = __rte_soring_stage_move_head(cons, &pstg->ht, 0, num,
-			RTE_RING_QUEUE_FIXED, &head, &next, &avail);
-		if (n == 0) {
-			/* try to finalize some elems from previous stage */
-			n = __rte_soring_stage_finalize(&pstg->sht, stage - 1,
-				r->state, r->mask, 2 * num);
-			avail += n;
-
-			/* repeat attempt to grab elems */
-			reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-			if (avail >= reqn)
-				n = __rte_soring_stage_move_head(cons,
-					&pstg->ht, 0, num, behavior, &head,
-					&next, &avail);
-			else
-				n = 0;
-		}
+			behavior, &head, &next, &avail);
 	}
 
 	if (n != 0) {
@@ -442,7 +411,7 @@ static __rte_always_inline void
 soring_release(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
 {
-	uint32_t idx, pos, tail;
+	uint32_t idx, pos;
 	struct soring_stage *stg;
 	union soring_state st;
 
@@ -479,11 +448,8 @@ soring_release(struct rte_soring *r, const void *objs,
 	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
 			rte_memory_order_relaxed);
 
-	/* try to do finalize(), if appropriate */
-	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
-			rte_memory_order_relaxed);
-	if (tail == pos)
-		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
+	/* try to do finalize(), if possible */
+	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
 				r->capacity);
 }
 
-- 
2.51.0

[PATCH v1 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

Follow the same pattern as conventional rte_ring and introduce peek API
for soring too.
Basically it provides similar functionality and similar opportunities
for the user, while similar constraints remain - only rings with
certain sync types are supported:
1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 app/test/meson.build               |   1 +
 app/test/test_soring_mt_stress.c   |  74 ++++++++
 app/test/test_soring_peek_stress.c |  75 ++++++++
 app/test/test_soring_stress.c      |   3 +
 app/test/test_soring_stress.h      |   1 +
 app/test/test_soring_stress_impl.h |  87 +---------
 lib/ring/rte_soring.h              | 264 +++++++++++++++++++++++++++++
 lib/ring/soring.c                  | 237 ++++++++++++++++++++++++--
 8 files changed, 652 insertions(+), 90 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

diff --git a/app/test/meson.build b/app/test/meson.build
index 7d458f9c07..033eaebb80 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -185,6 +185,7 @@ source_file_deps = {
     'test_service_cores.c': [],
     'test_soring.c': [],
     'test_soring_mt_stress.c': [],
+    'test_soring_peek_stress.c': [],
     'test_soring_stress.c': [],
     'test_spinlock.c': [],
     'test_stack.c': ['stack'],
diff --git a/app/test/test_soring_mt_stress.c b/app/test/test_soring_mt_stress.c
index 2f90bb4598..b4493b19de 100644
--- a/app/test/test_soring_mt_stress.c
+++ b/app/test/test_soring_mt_stress.c
@@ -33,8 +33,82 @@ _st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
 	rte_soring_release(r, NULL, stage, num, token);
 }
 
+static const struct test_case tests[] = {
+	{
+		.name = "MT_DEQENQ-MT_STG1-PRCS",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG1-AVG",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
+		.func = test_div_mt3,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
+		.func = test_div_mt3,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
 const struct test test_soring_mt_stress = {
 	.name = "MT",
 	.nb_case = RTE_DIM(tests),
 	.cases = tests,
 };
+
diff --git a/app/test/test_soring_peek_stress.c b/app/test/test_soring_peek_stress.c
new file mode 100644
index 0000000000..6ac638f8d7
--- /dev/null
+++ b/app/test/test_soring_peek_stress.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Huawei Technologies Co., Ltd
+ */
+
+#include "test_soring_stress_impl.h"
+
+static inline uint32_t
+_st_ring_dequeue_burst(struct rte_soring *r, void **obj, uint32_t n,
+	uint32_t *avail)
+{
+	uint32_t m;
+
+	m = rte_soring_dequeue_burst_start(r, obj, n, avail);
+	if (m != 0)
+		rte_soring_dequeue_finish(r, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_enqueue_bulk(struct rte_soring *r, void * const *obj, uint32_t n,
+	uint32_t *free)
+{
+	uint32_t m;
+
+	m = rte_soring_enqueue_bulk_start(r, n, free);
+	if (m != 0)
+		rte_soring_enqueue_finish(r, obj, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_acquire_burst(struct rte_soring *r, uint32_t stage, void **obj,
+	uint32_t num, uint32_t *token, uint32_t *avail)
+{
+	return rte_soring_acquire_burst(r, obj, stage, num, token, avail);
+}
+
+static inline void
+_st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
+	void * const *obj, uint32_t num)
+{
+	RTE_SET_USED(obj);
+	rte_soring_release(r, NULL, stage, num, token);
+}
+
+static const struct test_case tests[] = {
+
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
+const struct test test_soring_peek_stress = {
+	.name = "PEEK",
+	.nb_case = RTE_DIM(tests),
+	.cases = tests,
+};
+
diff --git a/app/test/test_soring_stress.c b/app/test/test_soring_stress.c
index e5655d49cb..f8fda64378 100644
--- a/app/test/test_soring_stress.c
+++ b/app/test/test_soring_stress.c
@@ -37,6 +37,9 @@ test_ring_stress(void)
 	n = 0;
 	k = 0;
 
+	n += test_soring_peek_stress.nb_case;
+	k += run_test(&test_soring_peek_stress);
+
 	n += test_soring_mt_stress.nb_case;
 	k += run_test(&test_soring_mt_stress);
 
diff --git a/app/test/test_soring_stress.h b/app/test/test_soring_stress.h
index 2341cc9f83..f988244410 100644
--- a/app/test/test_soring_stress.h
+++ b/app/test/test_soring_stress.h
@@ -32,3 +32,4 @@ struct test {
 };
 
 extern const struct test test_soring_mt_stress;
+extern const struct test test_soring_peek_stress;
diff --git a/app/test/test_soring_stress_impl.h b/app/test/test_soring_stress_impl.h
index 015825223d..0efc7e46a0 100644
--- a/app/test/test_soring_stress_impl.h
+++ b/app/test/test_soring_stress_impl.h
@@ -683,7 +683,7 @@ role_mask_denq_st(uint32_t nb_stage, uint32_t role_mask[RTE_MAX_LCORE])
 }
 
 
-static int
+static int __rte_unused
 test_sym_mt1(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -694,7 +694,7 @@ test_sym_mt1(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -706,7 +706,7 @@ test_sym_mt4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_rts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -718,7 +718,7 @@ test_sym_mt_rts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_hts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -730,7 +730,7 @@ test_sym_mt_hts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_stdenq_stage4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -743,7 +743,7 @@ test_stdenq_stage4(int (*test)(void *))
 }
 
 
-static int
+static int __rte_unused
 test_even_odd_mt5(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -755,7 +755,7 @@ test_even_odd_mt5(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_div_mt3(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -766,76 +766,3 @@ test_div_mt3(int (*test)(void *))
 	return test_mt(test, RTE_RING_SYNC_MT, RTE_RING_SYNC_MT,
 			nb_stage, role_mask);
 }
-
-static const struct test_case tests[] = {
-	{
-		.name = "MT_DEQENQ-MT_STG1-PRCS",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG1-AVG",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
-		.func = test_div_mt3,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
-		.func = test_div_mt3,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-PRCS",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-AVG",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_avg,
-	},
-};
diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
index 95c3cc4080..d2907cfe49 100644
--- a/lib/ring/rte_soring.h
+++ b/lib/ring/rte_soring.h
@@ -607,6 +607,270 @@ void
 rte_soring_releasx(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
 
+/**
+ * SORING Peek API
+ * Same as with rte_ring, for some sync modes it is possible to split
+ * public enqueue/dequeue API into two phases:
+ * - enqueue/dequeue start
+ * - enqueue/dequeue finish
+ * That allows user to inspect objects in the soring without removing them
+ * from it (aka MT safe peek).
+ * Note that right now this new API is available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is a user responsibility to create/init soring with appropriate sync
+ * modes selected for enqueue/dequeue.
+ * For more information, please refer to corresping rte_ring peek API.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue excact number of objects on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued, either 0 or n.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue several objects (up to 'n') on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to an array of metadata values for each object to enqueue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * Complete to dequeue several objects from the soring.
+ * Note that number of objects to dequeue should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to remove from the soring.
+ */
+__rte_experimental
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index fc7fc55a21..de5b67071f 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -247,6 +247,28 @@ __rte_soring_stage_move_head(struct soring_stage_headtail *d,
 	return n;
 }
 
+static inline void
+__enqueue_elems(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
+		r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
+static inline void
+__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
+			r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
 static inline uint32_t
 soring_enqueue(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t n, enum rte_ring_queue_behavior behavior,
@@ -263,11 +285,7 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	n = __rte_soring_move_prod_head(r, n, behavior, st,
 			&prod_head, &prod_next, &nb_free);
 	if (n != 0) {
-		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
-			prod_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
-				prod_head & r->mask, r->msize, n);
+		__enqueue_elems(r, objs, meta, prod_head, n);
 		__rte_soring_update_tail(&r->prod, st, prod_head, prod_next, 1);
 	}
 
@@ -276,6 +294,70 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	return n;
 }
 
+static inline uint32_t
+soring_enqueue_start(struct rte_soring *r, uint32_t num,
+	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
+{
+	enum rte_ring_sync_type st;
+	uint32_t free, head, n, next;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
+			r->capacity, RTE_RING_SYNC_ST, num, behavior,
+			&head, &next, &free);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
+			r->capacity, num, behavior, &head, &free);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		free = 0;
+		n = 0;
+	}
+
+	if (free_space != NULL)
+		*free_space = free - n;
+	return n;
+}
+
+static inline void
+soring_enqueue_finish(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t num)
+{
+	enum rte_ring_sync_type st;
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 static inline uint32_t
 soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t num, enum rte_ring_queue_behavior behavior,
@@ -296,11 +378,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 
 	/* we have some elems to consume */
 	if (n != 0) {
-		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
-			cons_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
-				cons_head & r->mask, r->msize, n);
+		__dequeue_elems(r, objs, meta, cons_head, n);
 		__rte_soring_update_tail(&r->cons, st, cons_head, cons_next, 0);
 	}
 
@@ -309,6 +387,67 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	return n;
 }
 
+static inline uint32_t
+soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, enum rte_ring_queue_behavior behavior,
+	uint32_t *available)
+{
+	enum rte_ring_sync_type st;
+	uint32_t avail, head, next, n, ns;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	ns = r->nb_stage - 1;
+	st = r->cons.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->cons.ht, &r->stage[ns].ht,
+			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
+			&avail);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->cons.hts, &r->stage[ns].ht,
+			0, num, behavior, &head, &avail);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		avail = 0;
+		n = 0;
+	}
+
+	/* we have some elems to consume */
+	if (n != 0)
+		__dequeue_elems(r, objs, meta, head, n);
+
+	if (available != NULL)
+		*available = avail - n;
+	return n;
+}
+
+
+static inline void
+soring_dequeue_finish(struct rte_soring *r, uint32_t num)
+{
+	uint32_t n, tail;
+
+	switch (r->cons.ht.sync_type) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
+		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
+		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 /*
  * Verify internal SORING state.
  * WARNING: if expected value is not equal to actual one, it means that for
@@ -598,3 +737,81 @@ rte_soring_free_count(const struct rte_soring *r)
 {
 	return r->capacity - rte_soring_count(r);
 }
+
+/*
+ * SORING public peek API
+ */
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n)
+{
+	return soring_enqueue_finish(r, objs, NULL, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n)
+{
+	return soring_enqueue_finish(r, objs, meta, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
+{
+	soring_dequeue_finish(r, n);
+}
-- 
2.51.0

[PATCH v2 0/2] few improvemnts for SORING lib

[Konstantin Ananyev]

First patch aims to improve enqueue/dequeue performance, specially
for the cases with multiple stage workers lcores.
Second one introduces 'Peek API' similar to what we have for
conventional rte_ring. Also it adds new test-cases for this new API.

v1 -> v2
- fix formal API comments (doxygen complaints)
- add section to release notes

Konstantin Ananyev (2):
  ring: make soring to finalize its own stage only
  ring: introduce peek API for soring

 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 264 ++++++++++++++++++++++
 lib/ring/soring.c                      | 289 ++++++++++++++++++++-----
 9 files changed, 669 insertions(+), 133 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

-- 
2.51.0

[PATCH v2 1/2] ring: make soring to finalize its own stage only

[Konstantin Ananyev]

While finalize() is MT-safe and can be called from multiple places:
from 'acquire()' for next stage or even from consumer's 'dequeue(),
doing so usually creates extra un-necessary contention and might
slow-down ring operations, especially for the cases when we have
multiple threads doing acquire/release for some stage.
Things become worse when we have single producer/consumer and multiple
workers doing acquire/release for the same ring.
So instead of calling finalize() from different places, just make
release() for given stage to always try to perform it.

Accorging to the soring_stress_autotest, for multiple workers (8+)
it reduces number of cycles spent by 1.5x-2.0x factor.
For l3fwd-like workload it improves things by ~20%.
For small number of workers didn't observe any serious change.
As another benefit - it allows to simplify the code.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 lib/ring/soring.c | 52 ++++++++---------------------------------------
 1 file changed, 9 insertions(+), 43 deletions(-)

diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 3b90521bdb..fc7fc55a21 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -50,10 +50,8 @@
  * from current stage tail up to its head, check state[] and move stage tail
  * through elements that already are in SORING_ST_FINISH state.
  * Along with that, corresponding state[] values are reset to zero.
- * Note that 'finalize()' for given stage can be done from multiple places:
- * 'release()' for that stage or from 'acquire()' for next stage
- * even from consumer's 'dequeue()' - in case given stage is the last one.
- * So 'finalize()' has to be MT-safe and inside it we have to
+ * Note that 'finalize()' for given stage can be called from multiple threads
+ * in parallel, so 'finalize()' has to be MT-safe and inside it we have to
  * guarantee that only one thread will update state[] and stage's tail values.
  */
 
@@ -284,7 +282,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t *available)
 {
 	enum rte_ring_sync_type st;
-	uint32_t entries, cons_head, cons_next, n, ns, reqn;
+	uint32_t entries, cons_head, cons_next, n, ns;
 
 	RTE_ASSERT(r != NULL && r->nb_stage > 0);
 	RTE_ASSERT(meta == NULL || r->meta != NULL);
@@ -293,22 +291,8 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	st = r->cons.ht.sync_type;
 
 	/* try to grab exactly @num elems first */
-	n = __rte_soring_move_cons_head(r, ns, num, RTE_RING_QUEUE_FIXED, st,
+	n = __rte_soring_move_cons_head(r, ns, num, behavior, st,
 			&cons_head, &cons_next, &entries);
-	if (n == 0) {
-		/* try to finalize some elems from previous stage */
-		n = __rte_soring_stage_finalize(&r->stage[ns].sht, ns,
-			r->state, r->mask, 2 * num);
-		entries += n;
-
-		/* repeat attempt to grab elems */
-		reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-		if (entries >= reqn)
-			n = __rte_soring_move_cons_head(r, ns, num, behavior,
-				st, &cons_head, &cons_next, &entries);
-		else
-			n = 0;
-	}
 
 	/* we have some elems to consume */
 	if (n != 0) {
@@ -382,7 +366,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 	uint32_t stage, uint32_t num, enum rte_ring_queue_behavior behavior,
 	uint32_t *ftoken, uint32_t *available)
 {
-	uint32_t avail, head, idx, n, next, reqn;
+	uint32_t avail, head, idx, n, next;
 	struct soring_stage *pstg;
 	struct soring_stage_headtail *cons;
 
@@ -399,22 +383,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 
 		/* try to grab exactly @num elems */
 		n = __rte_soring_stage_move_head(cons, &pstg->ht, 0, num,
-			RTE_RING_QUEUE_FIXED, &head, &next, &avail);
-		if (n == 0) {
-			/* try to finalize some elems from previous stage */
-			n = __rte_soring_stage_finalize(&pstg->sht, stage - 1,
-				r->state, r->mask, 2 * num);
-			avail += n;
-
-			/* repeat attempt to grab elems */
-			reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-			if (avail >= reqn)
-				n = __rte_soring_stage_move_head(cons,
-					&pstg->ht, 0, num, behavior, &head,
-					&next, &avail);
-			else
-				n = 0;
-		}
+			behavior, &head, &next, &avail);
 	}
 
 	if (n != 0) {
@@ -442,7 +411,7 @@ static __rte_always_inline void
 soring_release(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
 {
-	uint32_t idx, pos, tail;
+	uint32_t idx, pos;
 	struct soring_stage *stg;
 	union soring_state st;
 
@@ -479,11 +448,8 @@ soring_release(struct rte_soring *r, const void *objs,
 	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
 			rte_memory_order_relaxed);
 
-	/* try to do finalize(), if appropriate */
-	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
-			rte_memory_order_relaxed);
-	if (tail == pos)
-		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
+	/* try to do finalize(), if possible */
+	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
 				r->capacity);
 }
 
-- 
2.51.0

[PATCH v2 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

Follow the same pattern as conventional rte_ring and introduce peek API
for soring too.
Basically it provides similar functionality and similar opportunities
for the user, while similar constraints remain - only rings with
certain sync types are supported:
1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 264 +++++++++++++++++++++++++
 lib/ring/soring.c                      | 237 +++++++++++++++++++++-
 9 files changed, 660 insertions(+), 90 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

diff --git a/app/test/meson.build b/app/test/meson.build
index 7d458f9c07..033eaebb80 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -185,6 +185,7 @@ source_file_deps = {
     'test_service_cores.c': [],
     'test_soring.c': [],
     'test_soring_mt_stress.c': [],
+    'test_soring_peek_stress.c': [],
     'test_soring_stress.c': [],
     'test_spinlock.c': [],
     'test_stack.c': ['stack'],
diff --git a/app/test/test_soring_mt_stress.c b/app/test/test_soring_mt_stress.c
index 2f90bb4598..b4493b19de 100644
--- a/app/test/test_soring_mt_stress.c
+++ b/app/test/test_soring_mt_stress.c
@@ -33,8 +33,82 @@ _st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
 	rte_soring_release(r, NULL, stage, num, token);
 }
 
+static const struct test_case tests[] = {
+	{
+		.name = "MT_DEQENQ-MT_STG1-PRCS",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG1-AVG",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
+		.func = test_div_mt3,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
+		.func = test_div_mt3,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
 const struct test test_soring_mt_stress = {
 	.name = "MT",
 	.nb_case = RTE_DIM(tests),
 	.cases = tests,
 };
+
diff --git a/app/test/test_soring_peek_stress.c b/app/test/test_soring_peek_stress.c
new file mode 100644
index 0000000000..6ac638f8d7
--- /dev/null
+++ b/app/test/test_soring_peek_stress.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Huawei Technologies Co., Ltd
+ */
+
+#include "test_soring_stress_impl.h"
+
+static inline uint32_t
+_st_ring_dequeue_burst(struct rte_soring *r, void **obj, uint32_t n,
+	uint32_t *avail)
+{
+	uint32_t m;
+
+	m = rte_soring_dequeue_burst_start(r, obj, n, avail);
+	if (m != 0)
+		rte_soring_dequeue_finish(r, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_enqueue_bulk(struct rte_soring *r, void * const *obj, uint32_t n,
+	uint32_t *free)
+{
+	uint32_t m;
+
+	m = rte_soring_enqueue_bulk_start(r, n, free);
+	if (m != 0)
+		rte_soring_enqueue_finish(r, obj, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_acquire_burst(struct rte_soring *r, uint32_t stage, void **obj,
+	uint32_t num, uint32_t *token, uint32_t *avail)
+{
+	return rte_soring_acquire_burst(r, obj, stage, num, token, avail);
+}
+
+static inline void
+_st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
+	void * const *obj, uint32_t num)
+{
+	RTE_SET_USED(obj);
+	rte_soring_release(r, NULL, stage, num, token);
+}
+
+static const struct test_case tests[] = {
+
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
+const struct test test_soring_peek_stress = {
+	.name = "PEEK",
+	.nb_case = RTE_DIM(tests),
+	.cases = tests,
+};
+
diff --git a/app/test/test_soring_stress.c b/app/test/test_soring_stress.c
index e5655d49cb..f8fda64378 100644
--- a/app/test/test_soring_stress.c
+++ b/app/test/test_soring_stress.c
@@ -37,6 +37,9 @@ test_ring_stress(void)
 	n = 0;
 	k = 0;
 
+	n += test_soring_peek_stress.nb_case;
+	k += run_test(&test_soring_peek_stress);
+
 	n += test_soring_mt_stress.nb_case;
 	k += run_test(&test_soring_mt_stress);
 
diff --git a/app/test/test_soring_stress.h b/app/test/test_soring_stress.h
index 2341cc9f83..f988244410 100644
--- a/app/test/test_soring_stress.h
+++ b/app/test/test_soring_stress.h
@@ -32,3 +32,4 @@ struct test {
 };
 
 extern const struct test test_soring_mt_stress;
+extern const struct test test_soring_peek_stress;
diff --git a/app/test/test_soring_stress_impl.h b/app/test/test_soring_stress_impl.h
index 015825223d..0efc7e46a0 100644
--- a/app/test/test_soring_stress_impl.h
+++ b/app/test/test_soring_stress_impl.h
@@ -683,7 +683,7 @@ role_mask_denq_st(uint32_t nb_stage, uint32_t role_mask[RTE_MAX_LCORE])
 }
 
 
-static int
+static int __rte_unused
 test_sym_mt1(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -694,7 +694,7 @@ test_sym_mt1(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -706,7 +706,7 @@ test_sym_mt4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_rts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -718,7 +718,7 @@ test_sym_mt_rts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_hts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -730,7 +730,7 @@ test_sym_mt_hts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_stdenq_stage4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -743,7 +743,7 @@ test_stdenq_stage4(int (*test)(void *))
 }
 
 
-static int
+static int __rte_unused
 test_even_odd_mt5(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -755,7 +755,7 @@ test_even_odd_mt5(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_div_mt3(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -766,76 +766,3 @@ test_div_mt3(int (*test)(void *))
 	return test_mt(test, RTE_RING_SYNC_MT, RTE_RING_SYNC_MT,
 			nb_stage, role_mask);
 }
-
-static const struct test_case tests[] = {
-	{
-		.name = "MT_DEQENQ-MT_STG1-PRCS",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG1-AVG",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
-		.func = test_div_mt3,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
-		.func = test_div_mt3,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-PRCS",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-AVG",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_avg,
-	},
-};
diff --git a/doc/guides/rel_notes/release_26_07.rst b/doc/guides/rel_notes/release_26_07.rst
index f012d47a4b..313f00f6df 100644
--- a/doc/guides/rel_notes/release_26_07.rst
+++ b/doc/guides/rel_notes/release_26_07.rst
@@ -63,6 +63,14 @@ New Features
     ``rte_eal_init`` and the application is responsible for probing each device,
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
+* **Added peek style API for ``rte_soring``.**
+
+  For sorings with producer/consumer in ``RTE_RING_SYNC_ST``,
+  ``RTE_RING_SYNC_MT_HTS`` mode, provide the ability to split enqueue/dequeue
+  operation into two phases (enqueue/dequeue start and enqueue/dequeue finish).
+  This allows the user to inspect objects in the ring without removing them
+  (aka MT safe peek).
+
 
 Removed Items
 -------------
diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
index 95c3cc4080..16f042e612 100644
--- a/lib/ring/rte_soring.h
+++ b/lib/ring/rte_soring.h
@@ -607,6 +607,270 @@ void
 rte_soring_releasx(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
 
+/**
+ * SORING Peek API
+ * Same as with rte_ring, for some sync modes it is possible to split
+ * public enqueue/dequeue API into two phases:
+ * - enqueue/dequeue start
+ * - enqueue/dequeue finish
+ * That allows user to inspect objects in the soring without removing them
+ * from it (aka MT safe peek).
+ * Note that right now this new API is available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is a user responsibility to create/init soring with appropriate sync
+ * modes selected for enqueue/dequeue.
+ * For more information, please refer to corresping rte_ring peek API.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue excact number of objects on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued, either 0 or n.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue several objects (up to 'n') on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to an array of metadata values for each object to enqueue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * Complete to dequeue several objects from the soring.
+ * Note that number of objects to dequeue should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param num
+ *   The number of objects to remove from the soring.
+ */
+__rte_experimental
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index fc7fc55a21..de5b67071f 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -247,6 +247,28 @@ __rte_soring_stage_move_head(struct soring_stage_headtail *d,
 	return n;
 }
 
+static inline void
+__enqueue_elems(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
+		r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
+static inline void
+__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
+			r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
 static inline uint32_t
 soring_enqueue(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t n, enum rte_ring_queue_behavior behavior,
@@ -263,11 +285,7 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	n = __rte_soring_move_prod_head(r, n, behavior, st,
 			&prod_head, &prod_next, &nb_free);
 	if (n != 0) {
-		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
-			prod_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
-				prod_head & r->mask, r->msize, n);
+		__enqueue_elems(r, objs, meta, prod_head, n);
 		__rte_soring_update_tail(&r->prod, st, prod_head, prod_next, 1);
 	}
 
@@ -276,6 +294,70 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	return n;
 }
 
+static inline uint32_t
+soring_enqueue_start(struct rte_soring *r, uint32_t num,
+	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
+{
+	enum rte_ring_sync_type st;
+	uint32_t free, head, n, next;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
+			r->capacity, RTE_RING_SYNC_ST, num, behavior,
+			&head, &next, &free);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
+			r->capacity, num, behavior, &head, &free);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		free = 0;
+		n = 0;
+	}
+
+	if (free_space != NULL)
+		*free_space = free - n;
+	return n;
+}
+
+static inline void
+soring_enqueue_finish(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t num)
+{
+	enum rte_ring_sync_type st;
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 static inline uint32_t
 soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t num, enum rte_ring_queue_behavior behavior,
@@ -296,11 +378,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 
 	/* we have some elems to consume */
 	if (n != 0) {
-		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
-			cons_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
-				cons_head & r->mask, r->msize, n);
+		__dequeue_elems(r, objs, meta, cons_head, n);
 		__rte_soring_update_tail(&r->cons, st, cons_head, cons_next, 0);
 	}
 
@@ -309,6 +387,67 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	return n;
 }
 
+static inline uint32_t
+soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, enum rte_ring_queue_behavior behavior,
+	uint32_t *available)
+{
+	enum rte_ring_sync_type st;
+	uint32_t avail, head, next, n, ns;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	ns = r->nb_stage - 1;
+	st = r->cons.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->cons.ht, &r->stage[ns].ht,
+			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
+			&avail);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->cons.hts, &r->stage[ns].ht,
+			0, num, behavior, &head, &avail);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		avail = 0;
+		n = 0;
+	}
+
+	/* we have some elems to consume */
+	if (n != 0)
+		__dequeue_elems(r, objs, meta, head, n);
+
+	if (available != NULL)
+		*available = avail - n;
+	return n;
+}
+
+
+static inline void
+soring_dequeue_finish(struct rte_soring *r, uint32_t num)
+{
+	uint32_t n, tail;
+
+	switch (r->cons.ht.sync_type) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
+		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
+		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 /*
  * Verify internal SORING state.
  * WARNING: if expected value is not equal to actual one, it means that for
@@ -598,3 +737,81 @@ rte_soring_free_count(const struct rte_soring *r)
 {
 	return r->capacity - rte_soring_count(r);
 }
+
+/*
+ * SORING public peek API
+ */
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n)
+{
+	return soring_enqueue_finish(r, objs, NULL, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n)
+{
+	return soring_enqueue_finish(r, objs, meta, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
+{
+	soring_dequeue_finish(r, n);
+}
-- 
2.51.0

[PATCH v3 0/2] few improvemnts for SORING lib

[Konstantin Ananyev]

v2 -> v3
- fix MSVC complaints

v1 -> v2
- fix formal API comments (doxygen complaints)
- add section to release notes

First patch aims to improve enqueue/dequeue performance, specially
for the cases with multiple stage workers lcores.
Second one introduces 'Peek API' similar to what we have for
conventional rte_ring. Also it adds new test-cases for this new API.

Konstantin Ananyev (2):
  ring: make soring to finalize its own stage only
  ring: introduce peek API for soring

 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 264 ++++++++++++++++++++++
 lib/ring/soring.c                      | 289 ++++++++++++++++++++-----
 9 files changed, 669 insertions(+), 133 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

-- 
2.51.0

[PATCH v3 1/2] ring: make soring to finalize its own stage only

[Konstantin Ananyev]

While finalize() is MT-safe and can be called from multiple places:
from 'acquire()' for next stage or even from consumer's 'dequeue(),
doing so usually creates extra un-necessary contention and might
slow-down ring operations, especially for the cases when we have
multiple threads doing acquire/release for some stage.
Things become worse when we have single producer/consumer and multiple
workers doing acquire/release for the same ring.
So instead of calling finalize() from different places, just make
release() for given stage to always try to perform it.

Accorging to the soring_stress_autotest, for multiple workers (8+)
it reduces number of cycles spent by 1.5x-2.0x factor.
For l3fwd-like workload it improves things by ~20%.
For small number of workers didn't observe any serious change.
As another benefit - it allows to simplify the code.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 lib/ring/soring.c | 52 ++++++++---------------------------------------
 1 file changed, 9 insertions(+), 43 deletions(-)

diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 3b90521bdb..fc7fc55a21 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -50,10 +50,8 @@
  * from current stage tail up to its head, check state[] and move stage tail
  * through elements that already are in SORING_ST_FINISH state.
  * Along with that, corresponding state[] values are reset to zero.
- * Note that 'finalize()' for given stage can be done from multiple places:
- * 'release()' for that stage or from 'acquire()' for next stage
- * even from consumer's 'dequeue()' - in case given stage is the last one.
- * So 'finalize()' has to be MT-safe and inside it we have to
+ * Note that 'finalize()' for given stage can be called from multiple threads
+ * in parallel, so 'finalize()' has to be MT-safe and inside it we have to
  * guarantee that only one thread will update state[] and stage's tail values.
  */
 
@@ -284,7 +282,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t *available)
 {
 	enum rte_ring_sync_type st;
-	uint32_t entries, cons_head, cons_next, n, ns, reqn;
+	uint32_t entries, cons_head, cons_next, n, ns;
 
 	RTE_ASSERT(r != NULL && r->nb_stage > 0);
 	RTE_ASSERT(meta == NULL || r->meta != NULL);
@@ -293,22 +291,8 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	st = r->cons.ht.sync_type;
 
 	/* try to grab exactly @num elems first */
-	n = __rte_soring_move_cons_head(r, ns, num, RTE_RING_QUEUE_FIXED, st,
+	n = __rte_soring_move_cons_head(r, ns, num, behavior, st,
 			&cons_head, &cons_next, &entries);
-	if (n == 0) {
-		/* try to finalize some elems from previous stage */
-		n = __rte_soring_stage_finalize(&r->stage[ns].sht, ns,
-			r->state, r->mask, 2 * num);
-		entries += n;
-
-		/* repeat attempt to grab elems */
-		reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-		if (entries >= reqn)
-			n = __rte_soring_move_cons_head(r, ns, num, behavior,
-				st, &cons_head, &cons_next, &entries);
-		else
-			n = 0;
-	}
 
 	/* we have some elems to consume */
 	if (n != 0) {
@@ -382,7 +366,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 	uint32_t stage, uint32_t num, enum rte_ring_queue_behavior behavior,
 	uint32_t *ftoken, uint32_t *available)
 {
-	uint32_t avail, head, idx, n, next, reqn;
+	uint32_t avail, head, idx, n, next;
 	struct soring_stage *pstg;
 	struct soring_stage_headtail *cons;
 
@@ -399,22 +383,7 @@ soring_acquire(struct rte_soring *r, void *objs, void *meta,
 
 		/* try to grab exactly @num elems */
 		n = __rte_soring_stage_move_head(cons, &pstg->ht, 0, num,
-			RTE_RING_QUEUE_FIXED, &head, &next, &avail);
-		if (n == 0) {
-			/* try to finalize some elems from previous stage */
-			n = __rte_soring_stage_finalize(&pstg->sht, stage - 1,
-				r->state, r->mask, 2 * num);
-			avail += n;
-
-			/* repeat attempt to grab elems */
-			reqn = (behavior == RTE_RING_QUEUE_FIXED) ? num : 0;
-			if (avail >= reqn)
-				n = __rte_soring_stage_move_head(cons,
-					&pstg->ht, 0, num, behavior, &head,
-					&next, &avail);
-			else
-				n = 0;
-		}
+			behavior, &head, &next, &avail);
 	}
 
 	if (n != 0) {
@@ -442,7 +411,7 @@ static __rte_always_inline void
 soring_release(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
 {
-	uint32_t idx, pos, tail;
+	uint32_t idx, pos;
 	struct soring_stage *stg;
 	union soring_state st;
 
@@ -479,11 +448,8 @@ soring_release(struct rte_soring *r, const void *objs,
 	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
 			rte_memory_order_relaxed);
 
-	/* try to do finalize(), if appropriate */
-	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
-			rte_memory_order_relaxed);
-	if (tail == pos)
-		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
+	/* try to do finalize(), if possible */
+	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
 				r->capacity);
 }
 
-- 
2.51.0

[PATCH v3 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

Follow the same pattern as conventional rte_ring and introduce peek API
for soring too.
Basically it provides similar functionality and similar opportunities
for the user, while similar constraints remain - only rings with
certain sync types are supported:
1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 264 +++++++++++++++++++++++++
 lib/ring/soring.c                      | 237 +++++++++++++++++++++-
 9 files changed, 660 insertions(+), 90 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

diff --git a/app/test/meson.build b/app/test/meson.build
index 7d458f9c07..033eaebb80 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -185,6 +185,7 @@ source_file_deps = {
     'test_service_cores.c': [],
     'test_soring.c': [],
     'test_soring_mt_stress.c': [],
+    'test_soring_peek_stress.c': [],
     'test_soring_stress.c': [],
     'test_spinlock.c': [],
     'test_stack.c': ['stack'],
diff --git a/app/test/test_soring_mt_stress.c b/app/test/test_soring_mt_stress.c
index 2f90bb4598..b4493b19de 100644
--- a/app/test/test_soring_mt_stress.c
+++ b/app/test/test_soring_mt_stress.c
@@ -33,8 +33,82 @@ _st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
 	rte_soring_release(r, NULL, stage, num, token);
 }
 
+static const struct test_case tests[] = {
+	{
+		.name = "MT_DEQENQ-MT_STG1-PRCS",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG1-AVG",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
+		.func = test_div_mt3,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
+		.func = test_div_mt3,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
 const struct test test_soring_mt_stress = {
 	.name = "MT",
 	.nb_case = RTE_DIM(tests),
 	.cases = tests,
 };
+
diff --git a/app/test/test_soring_peek_stress.c b/app/test/test_soring_peek_stress.c
new file mode 100644
index 0000000000..6ac638f8d7
--- /dev/null
+++ b/app/test/test_soring_peek_stress.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Huawei Technologies Co., Ltd
+ */
+
+#include "test_soring_stress_impl.h"
+
+static inline uint32_t
+_st_ring_dequeue_burst(struct rte_soring *r, void **obj, uint32_t n,
+	uint32_t *avail)
+{
+	uint32_t m;
+
+	m = rte_soring_dequeue_burst_start(r, obj, n, avail);
+	if (m != 0)
+		rte_soring_dequeue_finish(r, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_enqueue_bulk(struct rte_soring *r, void * const *obj, uint32_t n,
+	uint32_t *free)
+{
+	uint32_t m;
+
+	m = rte_soring_enqueue_bulk_start(r, n, free);
+	if (m != 0)
+		rte_soring_enqueue_finish(r, obj, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_acquire_burst(struct rte_soring *r, uint32_t stage, void **obj,
+	uint32_t num, uint32_t *token, uint32_t *avail)
+{
+	return rte_soring_acquire_burst(r, obj, stage, num, token, avail);
+}
+
+static inline void
+_st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
+	void * const *obj, uint32_t num)
+{
+	RTE_SET_USED(obj);
+	rte_soring_release(r, NULL, stage, num, token);
+}
+
+static const struct test_case tests[] = {
+
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
+const struct test test_soring_peek_stress = {
+	.name = "PEEK",
+	.nb_case = RTE_DIM(tests),
+	.cases = tests,
+};
+
diff --git a/app/test/test_soring_stress.c b/app/test/test_soring_stress.c
index e5655d49cb..f8fda64378 100644
--- a/app/test/test_soring_stress.c
+++ b/app/test/test_soring_stress.c
@@ -37,6 +37,9 @@ test_ring_stress(void)
 	n = 0;
 	k = 0;
 
+	n += test_soring_peek_stress.nb_case;
+	k += run_test(&test_soring_peek_stress);
+
 	n += test_soring_mt_stress.nb_case;
 	k += run_test(&test_soring_mt_stress);
 
diff --git a/app/test/test_soring_stress.h b/app/test/test_soring_stress.h
index 2341cc9f83..f988244410 100644
--- a/app/test/test_soring_stress.h
+++ b/app/test/test_soring_stress.h
@@ -32,3 +32,4 @@ struct test {
 };
 
 extern const struct test test_soring_mt_stress;
+extern const struct test test_soring_peek_stress;
diff --git a/app/test/test_soring_stress_impl.h b/app/test/test_soring_stress_impl.h
index 015825223d..0efc7e46a0 100644
--- a/app/test/test_soring_stress_impl.h
+++ b/app/test/test_soring_stress_impl.h
@@ -683,7 +683,7 @@ role_mask_denq_st(uint32_t nb_stage, uint32_t role_mask[RTE_MAX_LCORE])
 }
 
 
-static int
+static int __rte_unused
 test_sym_mt1(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -694,7 +694,7 @@ test_sym_mt1(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -706,7 +706,7 @@ test_sym_mt4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_rts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -718,7 +718,7 @@ test_sym_mt_rts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_hts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -730,7 +730,7 @@ test_sym_mt_hts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_stdenq_stage4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -743,7 +743,7 @@ test_stdenq_stage4(int (*test)(void *))
 }
 
 
-static int
+static int __rte_unused
 test_even_odd_mt5(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -755,7 +755,7 @@ test_even_odd_mt5(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_div_mt3(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -766,76 +766,3 @@ test_div_mt3(int (*test)(void *))
 	return test_mt(test, RTE_RING_SYNC_MT, RTE_RING_SYNC_MT,
 			nb_stage, role_mask);
 }
-
-static const struct test_case tests[] = {
-	{
-		.name = "MT_DEQENQ-MT_STG1-PRCS",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG1-AVG",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
-		.func = test_div_mt3,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
-		.func = test_div_mt3,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-PRCS",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-AVG",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_avg,
-	},
-};
diff --git a/doc/guides/rel_notes/release_26_07.rst b/doc/guides/rel_notes/release_26_07.rst
index f012d47a4b..313f00f6df 100644
--- a/doc/guides/rel_notes/release_26_07.rst
+++ b/doc/guides/rel_notes/release_26_07.rst
@@ -63,6 +63,14 @@ New Features
     ``rte_eal_init`` and the application is responsible for probing each device,
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
+* **Added peek style API for ``rte_soring``.**
+
+  For sorings with producer/consumer in ``RTE_RING_SYNC_ST``,
+  ``RTE_RING_SYNC_MT_HTS`` mode, provide the ability to split enqueue/dequeue
+  operation into two phases (enqueue/dequeue start and enqueue/dequeue finish).
+  This allows the user to inspect objects in the ring without removing them
+  (aka MT safe peek).
+
 
 Removed Items
 -------------
diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
index 95c3cc4080..16f042e612 100644
--- a/lib/ring/rte_soring.h
+++ b/lib/ring/rte_soring.h
@@ -607,6 +607,270 @@ void
 rte_soring_releasx(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
 
+/**
+ * SORING Peek API
+ * Same as with rte_ring, for some sync modes it is possible to split
+ * public enqueue/dequeue API into two phases:
+ * - enqueue/dequeue start
+ * - enqueue/dequeue finish
+ * That allows user to inspect objects in the soring without removing them
+ * from it (aka MT safe peek).
+ * Note that right now this new API is available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is a user responsibility to create/init soring with appropriate sync
+ * modes selected for enqueue/dequeue.
+ * For more information, please refer to corresping rte_ring peek API.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue excact number of objects on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued, either 0 or n.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue several objects (up to 'n') on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to an array of metadata values for each object to enqueue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * Complete to dequeue several objects from the soring.
+ * Note that number of objects to dequeue should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param num
+ *   The number of objects to remove from the soring.
+ */
+__rte_experimental
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index fc7fc55a21..b7d0ad6da8 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -247,6 +247,28 @@ __rte_soring_stage_move_head(struct soring_stage_headtail *d,
 	return n;
 }
 
+static inline void
+__enqueue_elems(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
+		r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
+static inline void
+__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
+			r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
 static inline uint32_t
 soring_enqueue(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t n, enum rte_ring_queue_behavior behavior,
@@ -263,11 +285,7 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	n = __rte_soring_move_prod_head(r, n, behavior, st,
 			&prod_head, &prod_next, &nb_free);
 	if (n != 0) {
-		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
-			prod_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
-				prod_head & r->mask, r->msize, n);
+		__enqueue_elems(r, objs, meta, prod_head, n);
 		__rte_soring_update_tail(&r->prod, st, prod_head, prod_next, 1);
 	}
 
@@ -276,6 +294,70 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	return n;
 }
 
+static inline uint32_t
+soring_enqueue_start(struct rte_soring *r, uint32_t num,
+	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
+{
+	enum rte_ring_sync_type st;
+	uint32_t free, head, n, next;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
+			r->capacity, RTE_RING_SYNC_ST, num, behavior,
+			&head, &next, &free);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
+			r->capacity, num, behavior, &head, &free);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		free = 0;
+		n = 0;
+	}
+
+	if (free_space != NULL)
+		*free_space = free - n;
+	return n;
+}
+
+static inline void
+soring_enqueue_finish(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t num)
+{
+	enum rte_ring_sync_type st;
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 static inline uint32_t
 soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t num, enum rte_ring_queue_behavior behavior,
@@ -296,11 +378,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 
 	/* we have some elems to consume */
 	if (n != 0) {
-		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
-			cons_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
-				cons_head & r->mask, r->msize, n);
+		__dequeue_elems(r, objs, meta, cons_head, n);
 		__rte_soring_update_tail(&r->cons, st, cons_head, cons_next, 0);
 	}
 
@@ -309,6 +387,67 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	return n;
 }
 
+static inline uint32_t
+soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, enum rte_ring_queue_behavior behavior,
+	uint32_t *available)
+{
+	enum rte_ring_sync_type st;
+	uint32_t avail, head, next, n, ns;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	ns = r->nb_stage - 1;
+	st = r->cons.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->cons.ht, &r->stage[ns].ht,
+			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
+			&avail);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->cons.hts, &r->stage[ns].ht,
+			0, num, behavior, &head, &avail);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		avail = 0;
+		n = 0;
+	}
+
+	/* we have some elems to consume */
+	if (n != 0)
+		__dequeue_elems(r, objs, meta, head, n);
+
+	if (available != NULL)
+		*available = avail - n;
+	return n;
+}
+
+
+static inline void
+soring_dequeue_finish(struct rte_soring *r, uint32_t num)
+{
+	uint32_t n, tail;
+
+	switch (r->cons.ht.sync_type) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
+		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
+		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 /*
  * Verify internal SORING state.
  * WARNING: if expected value is not equal to actual one, it means that for
@@ -598,3 +737,81 @@ rte_soring_free_count(const struct rte_soring *r)
 {
 	return r->capacity - rte_soring_count(r);
 }
+
+/*
+ * SORING public peek API
+ */
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, NULL, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, meta, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
+{
+	soring_dequeue_finish(r, n);
+}
-- 
2.51.0

Re: [PATCH v3 0/2] few improvemnts for SORING lib

[Stephen Hemminger]

On Fri, 17 Apr 2026 22:23:56 +0100
Konstantin Ananyev <konstantin.ananyev@huawei.com> wrote:

> v2 -> v3
> - fix MSVC complaints
> 
> v1 -> v2
> - fix formal API comments (doxygen complaints)
> - add section to release notes
> 
> First patch aims to improve enqueue/dequeue performance, specially
> for the cases with multiple stage workers lcores.
> Second one introduces 'Peek API' similar to what we have for
> conventional rte_ring. Also it adds new test-cases for this new API.
> 
> Konstantin Ananyev (2):
>   ring: make soring to finalize its own stage only
>   ring: introduce peek API for soring
> 
>  app/test/meson.build                   |   1 +
>  app/test/test_soring_mt_stress.c       |  74 +++++++
>  app/test/test_soring_peek_stress.c     |  75 +++++++
>  app/test/test_soring_stress.c          |   3 +
>  app/test/test_soring_stress.h          |   1 +
>  app/test/test_soring_stress_impl.h     |  87 +-------
>  doc/guides/rel_notes/release_26_07.rst |   8 +
>  lib/ring/rte_soring.h                  | 264 ++++++++++++++++++++++
>  lib/ring/soring.c                      | 289 ++++++++++++++++++++-----
>  9 files changed, 669 insertions(+), 133 deletions(-)
>  create mode 100644 app/test/test_soring_peek_stress.c
> 

Lots of little typos caught by AI.

Based on review of both patches against the upstream DPDK tree, here is a summary of findings suitable for posting to the list. I recommend you edit/trim before sending since this is a draft.

Subject: Re: [PATCH v3 0/2] few improvemnts for SORING lib
General: "improvemnts" in the cover letter subject is a typo (improvements).
Same type of typo recurs in the patches themselves (see below); worth
a quick pass on the prose.

[PATCH v3 1/2] ring: make soring to finalize its own stage only
Warning:
The file-level comment block at the top of lib/ring/soring.c is only
partially updated. The hunk rewrites the paragraph starting with
"Note that 'finalize()' for given stage...", but leaves the earlier
paragraph describing release() behavior intact:
  "After that, it checks does old head value equals to current tail
   value?  If yes, then it performs 'finalize()' operation, otherwise
   'release()' just returns (without spinning on stage tail value).
   As updated state[] is shared by all threads, some other thread can
   do 'finalize()' for given stage.
   That allows 'release()' to avoid excessive waits on the tail value."
After this patch, release() unconditionally calls
__rte_soring_stage_finalize() (no tail==pos check), and acquire()/
dequeue() no longer call finalize() at all. The stale paragraph should
be updated to match, otherwise readers will be misled about both the
release() fast path and the "shared state[] lets another thread
finalize" claim.
Info:
"Accorging" in the commit message body -> "According".

[PATCH v3 2/2] ring: introduce peek API for soring
Warnings:
Doxygen description/signature mismatch. Several of the new doxygen
blocks are copy-paste from the "enqueux"/"dequeux" variants and
describe a metadata parameter that the declared function does not
take:
- rte_soring_enqueue_finish: described as "Complete to enqueue
several objects plus metadata" but takes no meta argument.
- rte_soring_dequeue_bulk_start: "Start to dequeue several objects
plus metadata" - takes no meta.
- rte_soring_dequeue_burst_start: same.
Also, the @param objs blocks for the dequeue_bulk_start /
dequeue_burst_start / dequeux_bulk_start / dequeux_burst_start
variants say "Size of objects to enqueue" - that should be "to
dequeue".
Missing experimental warning in doxygen for rte_soring_dequeue_finish.
Every other new function in this patch carries
  @warning
  @b EXPERIMENTAL: this API may change without prior notice.
rte_soring_dequeue_finish is declared __rte_experimental but its
doxygen block omits this block. Please add for consistency.
Missing RTE_ASSERT in soring_dequeue_finish(). soring_enqueue_start(),
soring_enqueue_finish() and soring_dequeue_start() all begin with
  RTE_ASSERT(r != NULL && r->nb_stage > 0);
soring_dequeue_finish() does not. Inconsistent with the rest of the
datapath; please add.
Info:
Doxygen typos:
- "Start to enqueue excact number of objects" -> "exact"
(rte_soring_enqueue_bulk_start description).
- "please refer to corresping rte_ring peek API" -> "corresponding"
(SORING Peek API header comment at the top of the new block).
Double space in new helper signature:
__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
^^
__enqueue_elems directly above it does not have this. Minor.
Stray trailing blank line inside the initializer in
app/test/test_soring_peek_stress.c ("static const struct test_case
tests[] = {\n\n\t{"). Cosmetic.
SPDX header in the new file test_soring_peek_stress.c reads
"Copyright(c) 2024 Huawei" but the file is being introduced in 2026.
(Copyright formatting is normally left to checkpatch, flagging for
awareness only.)

Nothing in either patch rose to the level of a correctness bug in my
review - no leaks, no UAF, no missing error paths, no races beyond what
the existing soring already accepts. The dependence on patch 1/2 for the
refactor into __enqueue_elems/__dequeue_elems helpers in patch 2/2 is
fine given normal series-apply order.

[PATCH v4 0/2] few improvemnts for SORING lib

[Konstantin Ananyev]

v3 -> v4
- Remove too aggressive optimization (patch #1)
- Fix AI review comments

v2 -> v3
- fix MSVC complaints

v1 -> v2
- fix formal API comments (doxygen complaints)
- add section to release notes

First patch aims to improve enqueue/dequeue performance, specially
for the cases with multiple workers lcores per stage.
Second one introduces 'Peek API' similar to what we have for
conventional rte_ring. Also it adds new test-cases for this new API.

Konstantin Ananyev (2):
  ring: make soring to always finalize its own stage
  ring: introduce peek API for soring

 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 267 ++++++++++++++++++++++++
 lib/ring/soring.c                      | 272 ++++++++++++++++++++++---
 9 files changed, 680 insertions(+), 108 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

-- 
2.51.0

[PATCH v4 1/2] ring: make soring to always finalize its own stage

[Konstantin Ananyev]

SORING internal finalize() function is MT-safe and can be called from
multiple places: from it's own stage release(), also from 'acquire()'
for next stage or even from consumer's 'dequeue().
But calling finalize() from not its own stage release() function
creates extra contention and might slow-down ring operations, especially
for the cases when we have multiple threads doing acquire/release
for the same stage.
We can't compeletely avoid calling finalize() from all these multiple
places, as it can in some rare cases break soring behavior.
But we can make release() for given stage to invoke it always.
That increases number of 'finalize()' operations done from 'release()'
for current stage, and helps to minimize number of finalize() calls from
other stages, which in turn, help to reduce the contention.
According to the soring_stress_autotest, for multiple workers (8+)
it reduces number of cycles spent by 1.5x-1.8x factor.
For l3fwd-like workload it improves things by ~20%.
For small number of workers, I didn't observe any serious change.
Note that it doesn't introduce any changes in functionality provided.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 lib/ring/soring.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 3b90521bdb..4bc2321fb5 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -37,24 +37,24 @@
  * plus current stage index).
  * 'release()' extracts old head value from provided ftoken and checks that
  * corresponding 'state[]' contains expected values(mostly for sanity
- * purposes).
- * Then it marks this state[] with 'SORING_ST_FINISH' flag to indicate
- * that given subset of objects was released.
- * After that, it checks does old head value equals to current tail value?
- * If yes, then it performs  'finalize()' operation, otherwise 'release()'
- * just returns (without spinning on stage tail value).
- * As updated state[] is shared by all threads, some other thread can do
- * 'finalize()' for given stage.
- * That allows 'release()' to avoid excessive waits on the tail value.
+ * purposes). Then it marks this state[] with 'SORING_ST_FINISH' flag to
+ * indicate that given subset of objects was released.
+ * After that, it calls 'finalize()'.
  * Main purpose of 'finalize()' operation is to walk through 'state[]'
  * from current stage tail up to its head, check state[] and move stage tail
  * through elements that already are in SORING_ST_FINISH state.
  * Along with that, corresponding state[] values are reset to zero.
- * Note that 'finalize()' for given stage can be done from multiple places:
+ * Note that updated state[] is shared by all threads, so
+ * 'finalize()' for given stage can be done from multiple places:
  * 'release()' for that stage or from 'acquire()' for next stage
  * even from consumer's 'dequeue()' - in case given stage is the last one.
  * So 'finalize()' has to be MT-safe and inside it we have to
- * guarantee that only one thread will update state[] and stage's tail values.
+ * guarantee that only one thread at a time will update state[] and
+ * stage's tail values (sort of critical-section).
+ * When multiple threads trying to do finalize() for the same stage,
+ * simultaneously one thread will win the race and do all the pending
+ * updates, while others will simply return (kind of try-lock scenario).
+ * That allows 'release()' to avoid excessive waits on the tail value.
  */
 
 #include "soring.h"
@@ -442,7 +442,7 @@ static __rte_always_inline void
 soring_release(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
 {
-	uint32_t idx, pos, tail;
+	uint32_t idx, pos;
 	struct soring_stage *stg;
 	union soring_state st;
 
@@ -479,12 +479,9 @@ soring_release(struct rte_soring *r, const void *objs,
 	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
 			rte_memory_order_relaxed);
 
-	/* try to do finalize(), if appropriate */
-	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
-			rte_memory_order_relaxed);
-	if (tail == pos)
-		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
-				r->capacity);
+	/* now, try to do finalize() */
+	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
+			r->capacity);
 }
 
 /*
-- 
2.51.0

RE: [PATCH v4 1/2] ring: make soring to always finalize its own stage

[Morten Brørup]

> From: Konstantin Ananyev [mailto:konstantin.ananyev@huawei.com]
> Sent: Thursday, 23 April 2026 11.16
> 
> SORING internal finalize() function is MT-safe and can be called from
> multiple places: from it's own stage release(), also from 'acquire()'
> for next stage or even from consumer's 'dequeue().
> But calling finalize() from not its own stage release() function
> creates extra contention and might slow-down ring operations,
> especially
> for the cases when we have multiple threads doing acquire/release
> for the same stage.
> We can't compeletely avoid calling finalize() from all these multiple
> places, as it can in some rare cases break soring behavior.
> But we can make release() for given stage to invoke it always.
> That increases number of 'finalize()' operations done from 'release()'
> for current stage, and helps to minimize number of finalize() calls
> from
> other stages, which in turn, help to reduce the contention.
> According to the soring_stress_autotest, for multiple workers (8+)
> it reduces number of cycles spent by 1.5x-1.8x factor.
> For l3fwd-like workload it improves things by ~20%.
> For small number of workers, I didn't observe any serious change.
> Note that it doesn't introduce any changes in functionality provided.
> 
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>

Good idea.
Not peeking into the tail to determine if finalize() might be omitted also makes release() cleaner.

Removing an optimization that was not really an optimization. :-)

Acked-by: Morten Brørup <mb@smartsharesystems.com>


> ---
>  lib/ring/soring.c | 33 +++++++++++++++------------------
>  1 file changed, 15 insertions(+), 18 deletions(-)
> 
> diff --git a/lib/ring/soring.c b/lib/ring/soring.c
> index 3b90521bdb..4bc2321fb5 100644
> --- a/lib/ring/soring.c
> +++ b/lib/ring/soring.c
> @@ -37,24 +37,24 @@
>   * plus current stage index).
>   * 'release()' extracts old head value from provided ftoken and checks
> that
>   * corresponding 'state[]' contains expected values(mostly for sanity
> - * purposes).
> - * Then it marks this state[] with 'SORING_ST_FINISH' flag to indicate
> - * that given subset of objects was released.
> - * After that, it checks does old head value equals to current tail
> value?
> - * If yes, then it performs  'finalize()' operation, otherwise
> 'release()'
> - * just returns (without spinning on stage tail value).
> - * As updated state[] is shared by all threads, some other thread can
> do
> - * 'finalize()' for given stage.
> - * That allows 'release()' to avoid excessive waits on the tail value.
> + * purposes). Then it marks this state[] with 'SORING_ST_FINISH' flag
> to
> + * indicate that given subset of objects was released.
> + * After that, it calls 'finalize()'.
>   * Main purpose of 'finalize()' operation is to walk through 'state[]'
>   * from current stage tail up to its head, check state[] and move
> stage tail
>   * through elements that already are in SORING_ST_FINISH state.
>   * Along with that, corresponding state[] values are reset to zero.
> - * Note that 'finalize()' for given stage can be done from multiple
> places:
> + * Note that updated state[] is shared by all threads, so
> + * 'finalize()' for given stage can be done from multiple places:
>   * 'release()' for that stage or from 'acquire()' for next stage
>   * even from consumer's 'dequeue()' - in case given stage is the last
> one.
>   * So 'finalize()' has to be MT-safe and inside it we have to
> - * guarantee that only one thread will update state[] and stage's tail
> values.
> + * guarantee that only one thread at a time will update state[] and
> + * stage's tail values (sort of critical-section).
> + * When multiple threads trying to do finalize() for the same stage,
> + * simultaneously one thread will win the race and do all the pending
> + * updates, while others will simply return (kind of try-lock
> scenario).
> + * That allows 'release()' to avoid excessive waits on the tail value.
>   */
> 
>  #include "soring.h"
> @@ -442,7 +442,7 @@ static __rte_always_inline void
>  soring_release(struct rte_soring *r, const void *objs,
>  	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
>  {
> -	uint32_t idx, pos, tail;
> +	uint32_t idx, pos;
>  	struct soring_stage *stg;
>  	union soring_state st;
> 
> @@ -479,12 +479,9 @@ soring_release(struct rte_soring *r, const void
> *objs,
>  	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
>  			rte_memory_order_relaxed);
> 
> -	/* try to do finalize(), if appropriate */
> -	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
> -			rte_memory_order_relaxed);
> -	if (tail == pos)
> -		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r-
> >mask,
> -				r->capacity);
> +	/* now, try to do finalize() */
> +	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
> +			r->capacity);
>  }
> 
>  /*
> --
> 2.51.0

[PATCH v4 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

Follow the same pattern as conventional rte_ring and introduce peek API
for soring too.
Basically it provides similar functionality and similar opportunities
for the user, while similar constraints remain - only rings with
certain sync types are supported:
1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
---
 app/test/meson.build                   |   1 +
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 267 +++++++++++++++++++++++++
 lib/ring/soring.c                      | 239 +++++++++++++++++++++-
 9 files changed, 665 insertions(+), 90 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

diff --git a/app/test/meson.build b/app/test/meson.build
index 7d458f9c07..033eaebb80 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -185,6 +185,7 @@ source_file_deps = {
     'test_service_cores.c': [],
     'test_soring.c': [],
     'test_soring_mt_stress.c': [],
+    'test_soring_peek_stress.c': [],
     'test_soring_stress.c': [],
     'test_spinlock.c': [],
     'test_stack.c': ['stack'],
diff --git a/app/test/test_soring_mt_stress.c b/app/test/test_soring_mt_stress.c
index 2f90bb4598..b4493b19de 100644
--- a/app/test/test_soring_mt_stress.c
+++ b/app/test/test_soring_mt_stress.c
@@ -33,8 +33,82 @@ _st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
 	rte_soring_release(r, NULL, stage, num, token);
 }
 
+static const struct test_case tests[] = {
+	{
+		.name = "MT_DEQENQ-MT_STG1-PRCS",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG1-AVG",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
+		.func = test_div_mt3,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
+		.func = test_div_mt3,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
 const struct test test_soring_mt_stress = {
 	.name = "MT",
 	.nb_case = RTE_DIM(tests),
 	.cases = tests,
 };
+
diff --git a/app/test/test_soring_peek_stress.c b/app/test/test_soring_peek_stress.c
new file mode 100644
index 0000000000..cbcea51c64
--- /dev/null
+++ b/app/test/test_soring_peek_stress.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2026 Huawei Technologies Co., Ltd
+ */
+
+#include "test_soring_stress_impl.h"
+
+static inline uint32_t
+_st_ring_dequeue_burst(struct rte_soring *r, void **obj, uint32_t n,
+	uint32_t *avail)
+{
+	uint32_t m;
+
+	m = rte_soring_dequeue_burst_start(r, obj, n, avail);
+	if (m != 0)
+		rte_soring_dequeue_finish(r, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_enqueue_bulk(struct rte_soring *r, void * const *obj, uint32_t n,
+	uint32_t *free)
+{
+	uint32_t m;
+
+	m = rte_soring_enqueue_bulk_start(r, n, free);
+	if (m != 0)
+		rte_soring_enqueue_finish(r, obj, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_acquire_burst(struct rte_soring *r, uint32_t stage, void **obj,
+	uint32_t num, uint32_t *token, uint32_t *avail)
+{
+	return rte_soring_acquire_burst(r, obj, stage, num, token, avail);
+}
+
+static inline void
+_st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
+	void * const *obj, uint32_t num)
+{
+	RTE_SET_USED(obj);
+	rte_soring_release(r, NULL, stage, num, token);
+}
+
+static const struct test_case tests[] = {
+
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
+const struct test test_soring_peek_stress = {
+	.name = "PEEK",
+	.nb_case = RTE_DIM(tests),
+	.cases = tests,
+};
+
diff --git a/app/test/test_soring_stress.c b/app/test/test_soring_stress.c
index e5655d49cb..f8fda64378 100644
--- a/app/test/test_soring_stress.c
+++ b/app/test/test_soring_stress.c
@@ -37,6 +37,9 @@ test_ring_stress(void)
 	n = 0;
 	k = 0;
 
+	n += test_soring_peek_stress.nb_case;
+	k += run_test(&test_soring_peek_stress);
+
 	n += test_soring_mt_stress.nb_case;
 	k += run_test(&test_soring_mt_stress);
 
diff --git a/app/test/test_soring_stress.h b/app/test/test_soring_stress.h
index 2341cc9f83..f988244410 100644
--- a/app/test/test_soring_stress.h
+++ b/app/test/test_soring_stress.h
@@ -32,3 +32,4 @@ struct test {
 };
 
 extern const struct test test_soring_mt_stress;
+extern const struct test test_soring_peek_stress;
diff --git a/app/test/test_soring_stress_impl.h b/app/test/test_soring_stress_impl.h
index 015825223d..0efc7e46a0 100644
--- a/app/test/test_soring_stress_impl.h
+++ b/app/test/test_soring_stress_impl.h
@@ -683,7 +683,7 @@ role_mask_denq_st(uint32_t nb_stage, uint32_t role_mask[RTE_MAX_LCORE])
 }
 
 
-static int
+static int __rte_unused
 test_sym_mt1(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -694,7 +694,7 @@ test_sym_mt1(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -706,7 +706,7 @@ test_sym_mt4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_rts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -718,7 +718,7 @@ test_sym_mt_rts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_hts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -730,7 +730,7 @@ test_sym_mt_hts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_stdenq_stage4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -743,7 +743,7 @@ test_stdenq_stage4(int (*test)(void *))
 }
 
 
-static int
+static int __rte_unused
 test_even_odd_mt5(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -755,7 +755,7 @@ test_even_odd_mt5(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_div_mt3(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -766,76 +766,3 @@ test_div_mt3(int (*test)(void *))
 	return test_mt(test, RTE_RING_SYNC_MT, RTE_RING_SYNC_MT,
 			nb_stage, role_mask);
 }
-
-static const struct test_case tests[] = {
-	{
-		.name = "MT_DEQENQ-MT_STG1-PRCS",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG1-AVG",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
-		.func = test_div_mt3,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
-		.func = test_div_mt3,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-PRCS",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-AVG",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_avg,
-	},
-};
diff --git a/doc/guides/rel_notes/release_26_07.rst b/doc/guides/rel_notes/release_26_07.rst
index f012d47a4b..313f00f6df 100644
--- a/doc/guides/rel_notes/release_26_07.rst
+++ b/doc/guides/rel_notes/release_26_07.rst
@@ -63,6 +63,14 @@ New Features
     ``rte_eal_init`` and the application is responsible for probing each device,
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
+* **Added peek style API for ``rte_soring``.**
+
+  For sorings with producer/consumer in ``RTE_RING_SYNC_ST``,
+  ``RTE_RING_SYNC_MT_HTS`` mode, provide the ability to split enqueue/dequeue
+  operation into two phases (enqueue/dequeue start and enqueue/dequeue finish).
+  This allows the user to inspect objects in the ring without removing them
+  (aka MT safe peek).
+
 
 Removed Items
 -------------
diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
index 95c3cc4080..5d214f85a0 100644
--- a/lib/ring/rte_soring.h
+++ b/lib/ring/rte_soring.h
@@ -607,6 +607,273 @@ void
 rte_soring_releasx(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
 
+/**
+ * SORING Peek API
+ * Same as with rte_ring, for some sync modes it is possible to split
+ * public enqueue/dequeue API into two phases:
+ * - enqueue/dequeue start
+ * - enqueue/dequeue finish
+ * That allows user to inspect objects in the soring without removing them
+ * from it (aka MT safe peek).
+ * Note that right now this new API is available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is a user responsibility to create/init soring with appropriate sync
+ * modes selected for enqueue/dequeue.
+ * For more information, please refer to corresponding rte_ring peek API.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue exact number of objects on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued, either 0 or n.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue several objects (up to 'n') on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate enqueue_elem_finish() to copy objects into the
+ * queue and complete given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   - Actual number of objects enqueued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to an array of metadata values for each object to enqueue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   - Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to dequeue several objects from the soring.
+ * Note that number of objects to dequeue should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param num
+ *   The number of objects to remove from the soring.
+ */
+__rte_experimental
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 4bc2321fb5..37f2db2557 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -249,6 +249,28 @@ __rte_soring_stage_move_head(struct soring_stage_headtail *d,
 	return n;
 }
 
+static inline void
+__enqueue_elems(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
+		r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
+static inline void
+__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
+			r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
 static inline uint32_t
 soring_enqueue(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t n, enum rte_ring_queue_behavior behavior,
@@ -265,11 +287,7 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	n = __rte_soring_move_prod_head(r, n, behavior, st,
 			&prod_head, &prod_next, &nb_free);
 	if (n != 0) {
-		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
-			prod_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
-				prod_head & r->mask, r->msize, n);
+		__enqueue_elems(r, objs, meta, prod_head, n);
 		__rte_soring_update_tail(&r->prod, st, prod_head, prod_next, 1);
 	}
 
@@ -278,6 +296,70 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	return n;
 }
 
+static inline uint32_t
+soring_enqueue_start(struct rte_soring *r, uint32_t num,
+	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
+{
+	enum rte_ring_sync_type st;
+	uint32_t free, head, n, next;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
+			r->capacity, RTE_RING_SYNC_ST, num, behavior,
+			&head, &next, &free);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
+			r->capacity, num, behavior, &head, &free);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		free = 0;
+		n = 0;
+	}
+
+	if (free_space != NULL)
+		*free_space = free - n;
+	return n;
+}
+
+static inline void
+soring_enqueue_finish(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t num)
+{
+	enum rte_ring_sync_type st;
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 static inline uint32_t
 soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t num, enum rte_ring_queue_behavior behavior,
@@ -312,11 +394,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 
 	/* we have some elems to consume */
 	if (n != 0) {
-		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
-			cons_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
-				cons_head & r->mask, r->msize, n);
+		__dequeue_elems(r, objs, meta, cons_head, n);
 		__rte_soring_update_tail(&r->cons, st, cons_head, cons_next, 0);
 	}
 
@@ -325,6 +403,69 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	return n;
 }
 
+static inline uint32_t
+soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, enum rte_ring_queue_behavior behavior,
+	uint32_t *available)
+{
+	enum rte_ring_sync_type st;
+	uint32_t avail, head, next, n, ns;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	ns = r->nb_stage - 1;
+	st = r->cons.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->cons.ht, &r->stage[ns].ht,
+			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
+			&avail);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->cons.hts, &r->stage[ns].ht,
+			0, num, behavior, &head, &avail);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		avail = 0;
+		n = 0;
+	}
+
+	/* we have some elems to consume */
+	if (n != 0)
+		__dequeue_elems(r, objs, meta, head, n);
+
+	if (available != NULL)
+		*available = avail - n;
+	return n;
+}
+
+
+static inline void
+soring_dequeue_finish(struct rte_soring *r, uint32_t num)
+{
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	switch (r->cons.ht.sync_type) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
+		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
+		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 /*
  * Verify internal SORING state.
  * WARNING: if expected value is not equal to actual one, it means that for
@@ -629,3 +770,81 @@ rte_soring_free_count(const struct rte_soring *r)
 {
 	return r->capacity - rte_soring_count(r);
 }
+
+/*
+ * SORING public peek API
+ */
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, NULL, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, meta, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
+{
+	soring_dequeue_finish(r, n);
+}
-- 
2.51.0

RE: [PATCH v4 2/2] ring: introduce peek API for soring

[Morten Brørup]

> From: Konstantin Ananyev [mailto:konstantin.ananyev@huawei.com]
> Sent: Thursday, 23 April 2026 11.16
> 
> Follow the same pattern as conventional rte_ring and introduce peek API
> for soring too.
> Basically it provides similar functionality and similar opportunities
> for the user, while similar constraints remain - only rings with
> certain sync types are supported:
> 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
> 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
> 
> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
> ---

Some comments inline below,
mainly regarding function descriptions,
and using RTE_ASSERT(0) for invalid SORING sync types.

With the function descriptions fixed,
Acked-by: Morten Brørup <mb@smartsharesystems.com>


> diff --git a/doc/guides/rel_notes/release_26_07.rst
> b/doc/guides/rel_notes/release_26_07.rst
> index f012d47a4b..313f00f6df 100644
> --- a/doc/guides/rel_notes/release_26_07.rst
> +++ b/doc/guides/rel_notes/release_26_07.rst
> @@ -63,6 +63,14 @@ New Features
>      ``rte_eal_init`` and the application is responsible for probing
> each device,
>    * ``--auto-probing`` enables the initial bus probing, which is the
> current default behavior.
> 
> +* **Added peek style API for ``rte_soring``.**
> +
> +  For sorings with producer/consumer in ``RTE_RING_SYNC_ST``,
> +  ``RTE_RING_SYNC_MT_HTS`` mode, provide the ability to split
> enqueue/dequeue
> +  operation into two phases (enqueue/dequeue start and enqueue/dequeue
> finish).
> +  This allows the user to inspect objects in the ring without removing
> them
> +  (aka MT safe peek).
> +
> 
>  Removed Items
>  -------------
> diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
> index 95c3cc4080..5d214f85a0 100644
> --- a/lib/ring/rte_soring.h
> +++ b/lib/ring/rte_soring.h
> @@ -607,6 +607,273 @@ void
>  rte_soring_releasx(struct rte_soring *r, const void *objs,
>  	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
> 
> +/**
> + * SORING Peek API
> + * Same as with rte_ring, for some sync modes it is possible to split
> + * public enqueue/dequeue API into two phases:
> + * - enqueue/dequeue start
> + * - enqueue/dequeue finish
> + * That allows user to inspect objects in the soring without removing
> them
> + * from it (aka MT safe peek).
> + * Note that right now this new API is available only for two sync
> modes:
> + * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
> + * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
> + * It is a user responsibility to create/init soring with appropriate
> sync
> + * modes selected for enqueue/dequeue.
> + * For more information, please refer to corresponding rte_ring peek
> API.
> + */
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to enqueue exact number of objects on the soring.
> + * Note that no actual objects are put in the queue by this function,
> + * it just reserves for user such ability.
> + * User has to call appropriate enqueue_elem_finish() to copy objects
> into the

Copy-paste error:
User has to call appropriate enqueue_elem_finish() to copy objects->
User has to call appropriate rte_soring_enqueue_finish() or rte_soring_enqueux_finish() to copy objects

> + * queue and complete given enqueue operation.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param n
> + *   The number of objects to add in the soring.
> + * @param free_space
> + *   if non-NULL, returns the amount of space in the soring after the
> + *   enqueue operation has finished.
> + * @return
> + *   - Actual number of objects enqueued, either 0 or n.

They are not yet enqueued on return, suggest (as in rte_ring_peek.h):
The number of objects that can be enqueued, either 0 or n.

Also, it's not a list of various return values, so just: "The number..." instead of "- The number...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
> +	uint32_t *free_space);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to enqueue several objects (up to 'n') on the soring.
> + * Note that no actual objects are put in the queue by this function,
> + * it just reserves for user such ability.
> + * User has to call appropriate enqueue_elem_finish() to copy objects

Copy-paste error:
User has to call appropriate enqueue_elem_finish() to copy objects->
User has to call appropriate rte_soring_enqueue_finish() or rte_soring_enqueux_finish() to copy objects

> into the
> + * queue and complete given enqueue operation.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param n
> + *   The number of objects to add in the soring.
> + * @param free_space
> + *   if non-NULL, returns the amount of space in the soring after the
> + *   enqueue operation has finished.
> + * @return
> + *   - Actual number of objects enqueued.

They are not yet enqueued on return, suggest (as in rte_ring_peek.h):
Actual number of objects that can be enqueued.

Also, it's not a list of various return values, so just: "Actual ..." instead of "- Actual...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
> +	uint32_t *free_space);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Complete to enqueue several objects on the soring.
> + * Note that number of objects to enqueue should not exceed previous
> + * enqueue_start return value.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to enqueue.
> + *   Size of objects to enqueue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param n
> + *   The number of objects to add in the soring from the 'objs'.
> + */
> +__rte_experimental
> +void
> +rte_soring_enqueue_finish(struct rte_soring *r, const void *objs,
> uint32_t n);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Complete to enqueue several objects plus metadata on the soring.
> + * Note that number of objects to enqueue should not exceed previous
> + * enqueue_start return value.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to enqueue.
> + *   Size of objects to enqueue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param meta
> + *   A pointer to an array of metadata values for each object to
> enqueue.
> + *   Note that if user not using object metadata values, then this
> parameter
> + *   can be NULL.
> + *   Size of elements in this array must be the same value as
> 'meta_size'
> + *   parameter used while creating the soring. If user created the
> soring with
> + *   'meta_size' value equals zero, then 'meta' parameter should be
> NULL.
> + *   Otherwise the results are undefined.
> + * @param n
> + *   The number of objects to add in the soring from the 'objs'.
> + */
> +__rte_experimental
> +void
> +rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
> +	const void *meta, uint32_t n);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to dequeue several objects from the soring.
> + * Dequeues exactly requested number of objects or none.
> + * Note that user has to call appropriate dequeue_finish()
> + * to complete given dequeue operation and actually remove objects
> from
> + * the soring.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to dequeue.
> + *   Size of objects to dequeue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param num
> + *   The number of objects to dequeue from the soring into the objs.
> + * @param available
> + *   If non-NULL, returns the number of remaining soring entries after
> the
> + *   dequeue has finished.
> + * @return
> + *   - Actual number of objects dequeued, either 0 or 'num'.

It's not a list of various return values, so just: "Actual ..." instead of "- Actual...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs,
> uint32_t num,
> +	uint32_t *available);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to dequeue several objects plus metadata from the soring.
> + * Dequeues exactly requested number of objects or none.
> + * Note that user has to call appropriate dequeue_finish()
> + * to complete given dequeue operation and actually remove objects
> from
> + * the soring.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to dequeue.
> + *   Size of objects to dequeue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param meta
> + *   A pointer to array of metadata values for each object to dequeue.
> + *   Note that if user not using object metadata values, then this
> parameter
> + *   can be NULL.
> + *   Size of elements in this array must be the same value as
> 'meta_size'
> + *   parameter used while creating the soring. If user created the
> soring with
> + *   'meta_size' value equals zero, then 'meta' parameter should be
> NULL.
> + *   Otherwise the results are undefined.
> + * @param num
> + *   The number of objects to dequeue from the soring into the objs.
> + * @param available
> + *   If non-NULL, returns the number of remaining soring entries after
> the
> + *   dequeue has finished.
> + * @return
> + *   - Actual number of objects dequeued, either 0 or 'num'.

It's not a list of various return values, so just: "Actual ..." instead of "- Actual...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void
> *meta,
> +	uint32_t num, uint32_t *available);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to dequeue several objects from the soring.
> + * Dequeues up to requested number of objects.
> + * Note that user has to call appropriate dequeue_finish()
> + * to complete given dequeue operation and actually remove objects
> from
> + * the soring.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to dequeue.
> + *   Size of objects to dequeue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param num
> + *   The number of objects to dequeue from the soring into the objs.
> + * @param available
> + *   If non-NULL, returns the number of remaining soring entries after
> the
> + *   dequeue has finished.
> + * @return
> + *   - Actual number of objects dequeued.

It's not a list of various return values, so just: "Actual ..." instead of "- Actual...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs,
> uint32_t num,
> +	uint32_t *available);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Start to dequeue several objects plus metadata from the soring.
> + * Dequeues up to requested number of objects.
> + * Note that user has to call appropriate dequeue_finish()
> + * to complete given dequeue operation and actually remove objects
> from
> + * the soring.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param objs
> + *   A pointer to an array of objects to dequeue.
> + *   Size of objects to dequeue must be the same value as 'elem_size'
> parameter
> + *   used while creating the soring. Otherwise the results are
> undefined.
> + * @param meta
> + *   A pointer to array of metadata values for each object to dequeue.
> + *   Note that if user not using object metadata values, then this
> parameter
> + *   can be NULL.
> + *   Size of elements in this array must be the same value as
> 'meta_size'
> + *   parameter used while creating the soring. If user created the
> soring with
> + *   'meta_size' value equals zero, then 'meta' parameter should be
> NULL.
> + *   Otherwise the results are undefined.
> + * @param num
> + *   The number of objects to dequeue from the soring into the objs.
> + * @param available
> + *   If non-NULL, returns the number of remaining soring entries after
> the
> + *   dequeue has finished.
> + * @return
> + *   - Actual number of objects dequeued.

It's not a list of various return values, so just: "Actual ..." instead of "- Actual...".

> + */
> +__rte_experimental
> +uint32_t
> +rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void
> *meta,
> +	uint32_t num, uint32_t *available);
> +
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Complete to dequeue several objects from the soring.
> + * Note that number of objects to dequeue should not exceed previous
> + * dequeue_start return value.
> + *
> + * @param r
> + *   A pointer to the soring structure.
> + * @param num
> + *   The number of objects to remove from the soring.
> + */
> +__rte_experimental
> +void
> +rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
> +
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/lib/ring/soring.c b/lib/ring/soring.c
> index 4bc2321fb5..37f2db2557 100644
> --- a/lib/ring/soring.c
> +++ b/lib/ring/soring.c
> @@ -249,6 +249,28 @@ __rte_soring_stage_move_head(struct
> soring_stage_headtail *d,
>  	return n;
>  }
> 
> +static inline void
> +__enqueue_elems(struct rte_soring *r, const void *objs, const void
> *meta,
> +	uint32_t head, uint32_t n)
> +{
> +	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
> +		r->esize, n);
> +	if (meta != NULL)
> +		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
> +			head & r->mask, r->msize, n);
> +}
> +
> +static inline void
> +__dequeue_elems(const struct rte_soring *r, void *objs,  void *meta,
> +	uint32_t head, uint32_t n)
> +{
> +	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
> +			r->esize, n);
> +	if (meta != NULL)
> +		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
> +			head & r->mask, r->msize, n);
> +}
> +

Good consolidation with the two functions above.

>  static inline uint32_t
>  soring_enqueue(struct rte_soring *r, const void *objs,
>  	const void *meta, uint32_t n, enum rte_ring_queue_behavior
> behavior,
> @@ -265,11 +287,7 @@ soring_enqueue(struct rte_soring *r, const void
> *objs,
>  	n = __rte_soring_move_prod_head(r, n, behavior, st,
>  			&prod_head, &prod_next, &nb_free);
>  	if (n != 0) {
> -		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
> -			prod_head & r->mask, r->esize, n);
> -		if (meta != NULL)
> -			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
> -				prod_head & r->mask, r->msize, n);
> +		__enqueue_elems(r, objs, meta, prod_head, n);
>  		__rte_soring_update_tail(&r->prod, st, prod_head,
> prod_next, 1);
>  	}
> 
> @@ -278,6 +296,70 @@ soring_enqueue(struct rte_soring *r, const void
> *objs,
>  	return n;
>  }
> 
> +static inline uint32_t
> +soring_enqueue_start(struct rte_soring *r, uint32_t num,
> +	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
> +{
> +	enum rte_ring_sync_type st;
> +	uint32_t free, head, n, next;
> +
> +	RTE_ASSERT(r != NULL && r->nb_stage > 0);
> +
> +	st = r->prod.ht.sync_type;
> +
> +	switch (st) {
> +	case RTE_RING_SYNC_ST:
> +		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
> +			r->capacity, RTE_RING_SYNC_ST, num, behavior,
> +			&head, &next, &free);
> +		break;
> +	case RTE_RING_SYNC_MT_HTS:
> +		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
> +			r->capacity, num, behavior, &head, &free);
> +		break;
> +	default:
> +		/* unsupported mode, shouldn't be here */
> +		RTE_ASSERT(0);

Is RTE_ASSERT(0) the right choice for failure here?
Unless built with assertions enabled, RTE_ASSERT(0) does nothing, and this function also does nothing but returns 0 as free_space, which may not be correct.

Maybe rte_panic() instead.
It's an application bug to call this with the wrong SORING sync type.
We cannot handle it gracefully, so better to fail early.
Just an idea; I have no strong preference.

> +		free = 0;
> +		n = 0;
> +	}
> +
> +	if (free_space != NULL)
> +		*free_space = free - n;
> +	return n;
> +}
> +
> +static inline void
> +soring_enqueue_finish(struct rte_soring *r, const void *objs, const
> void *meta,
> +	uint32_t num)
> +{
> +	enum rte_ring_sync_type st;
> +	uint32_t n, tail;
> +
> +	RTE_ASSERT(r != NULL && r->nb_stage > 0);
> +	RTE_ASSERT(meta == NULL || r->meta != NULL);
> +
> +	st = r->prod.ht.sync_type;
> +
> +	switch (st) {
> +	case RTE_RING_SYNC_ST:
> +		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
> +		if (n != 0)
> +			__enqueue_elems(r, objs, meta, tail, n);
> +		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
> +		break;
> +	case RTE_RING_SYNC_MT_HTS:
> +		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
> +		if (n != 0)
> +			__enqueue_elems(r, objs, meta, tail, n);
> +		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
> +		break;
> +	default:
> +		/* unsupported mode, shouldn't be here */
> +		RTE_ASSERT(0);

Is RTE_ASSERT(0) the right choice for failure here?

> +	}
> +}
> +
>  static inline uint32_t
>  soring_dequeue(struct rte_soring *r, void *objs, void *meta,
>  	uint32_t num, enum rte_ring_queue_behavior behavior,
> @@ -312,11 +394,7 @@ soring_dequeue(struct rte_soring *r, void *objs,
> void *meta,
> 
>  	/* we have some elems to consume */
>  	if (n != 0) {
> -		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
> -			cons_head & r->mask, r->esize, n);
> -		if (meta != NULL)
> -			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
> -				cons_head & r->mask, r->msize, n);
> +		__dequeue_elems(r, objs, meta, cons_head, n);
>  		__rte_soring_update_tail(&r->cons, st, cons_head,
> cons_next, 0);
>  	}
> 
> @@ -325,6 +403,69 @@ soring_dequeue(struct rte_soring *r, void *objs,
> void *meta,
>  	return n;
>  }
> 
> +static inline uint32_t
> +soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
> +	uint32_t num, enum rte_ring_queue_behavior behavior,
> +	uint32_t *available)
> +{
> +	enum rte_ring_sync_type st;
> +	uint32_t avail, head, next, n, ns;
> +
> +	RTE_ASSERT(r != NULL && r->nb_stage > 0);
> +	RTE_ASSERT(meta == NULL || r->meta != NULL);
> +
> +	ns = r->nb_stage - 1;
> +	st = r->cons.ht.sync_type;
> +
> +	switch (st) {
> +	case RTE_RING_SYNC_ST:
> +		n = __rte_ring_headtail_move_head(&r->cons.ht, &r-
> >stage[ns].ht,
> +			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
> +			&avail);
> +		break;
> +	case RTE_RING_SYNC_MT_HTS:
> +		n = __rte_ring_hts_move_head(&r->cons.hts, &r-
> >stage[ns].ht,
> +			0, num, behavior, &head, &avail);
> +		break;
> +	default:
> +		/* unsupported mode, shouldn't be here */
> +		RTE_ASSERT(0);

Is RTE_ASSERT(0) the right choice for failure here?

> +		avail = 0;
> +		n = 0;
> +	}
> +
> +	/* we have some elems to consume */
> +	if (n != 0)
> +		__dequeue_elems(r, objs, meta, head, n);
> +
> +	if (available != NULL)
> +		*available = avail - n;
> +	return n;
> +}
> +
> +
> +static inline void
> +soring_dequeue_finish(struct rte_soring *r, uint32_t num)
> +{
> +	uint32_t n, tail;
> +
> +	RTE_ASSERT(r != NULL && r->nb_stage > 0);
> +
> +	switch (r->cons.ht.sync_type) {
> +	case RTE_RING_SYNC_ST:
> +		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
> +		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
> +		break;
> +	case RTE_RING_SYNC_MT_HTS:
> +		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
> +		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
> +		break;
> +	default:
> +		/* unsupported mode, shouldn't be here */
> +		RTE_ASSERT(0);

Is RTE_ASSERT(0) the right choice for failure here?

> +	}
> +}
> +
>  /*
>   * Verify internal SORING state.
>   * WARNING: if expected value is not equal to actual one, it means
> that for
> @@ -629,3 +770,81 @@ rte_soring_free_count(const struct rte_soring *r)
>  {
>  	return r->capacity - rte_soring_count(r);
>  }
> +
> +/*
> + * SORING public peek API
> + */
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
> +uint32_t
> +rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
> +	uint32_t *free_space)
> +{
> +	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED,
> free_space);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
> +uint32_t
> +rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
> +	uint32_t *free_space)
> +{
> +	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE,
> free_space);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
> +void
> +rte_soring_enqueue_finish(struct rte_soring *r, const void *objs,
> uint32_t n)
> +{
> +	soring_enqueue_finish(r, objs, NULL, n);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
> +void
> +rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
> +	const void *meta, uint32_t n)
> +{
> +	soring_enqueue_finish(r, objs, meta, n);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
> +uint32_t
> +rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs,
> uint32_t num,
> +	uint32_t *available)
> +{
> +	return soring_dequeue_start(r, objs, NULL, num,
> RTE_RING_QUEUE_FIXED,
> +		available);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
> +uint32_t
> +rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void
> *meta,
> +	uint32_t num, uint32_t *available)
> +{
> +	return soring_dequeue_start(r, objs, meta, num,
> RTE_RING_QUEUE_FIXED,
> +		available);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
> +uint32_t
> +rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs,
> uint32_t num,
> +	uint32_t *available)
> +{
> +	return soring_dequeue_start(r, objs, NULL, num,
> RTE_RING_QUEUE_VARIABLE,
> +		available);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
> +uint32_t
> +rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void
> *meta,
> +	uint32_t num, uint32_t *available)
> +{
> +	return soring_dequeue_start(r, objs, meta, num,
> RTE_RING_QUEUE_VARIABLE,
> +		available);
> +}
> +
> +RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
> +void
> +rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
> +{
> +	soring_dequeue_finish(r, n);
> +}
> --
> 2.51.0

RE: [PATCH v4 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

> > +static inline uint32_t
> > +soring_enqueue_start(struct rte_soring *r, uint32_t num,
> > +	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
> > +{
> > +	enum rte_ring_sync_type st;
> > +	uint32_t free, head, n, next;
> > +
> > +	RTE_ASSERT(r != NULL && r->nb_stage > 0);
> > +
> > +	st = r->prod.ht.sync_type;
> > +
> > +	switch (st) {
> > +	case RTE_RING_SYNC_ST:
> > +		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
> > +			r->capacity, RTE_RING_SYNC_ST, num, behavior,
> > +			&head, &next, &free);
> > +		break;
> > +	case RTE_RING_SYNC_MT_HTS:
> > +		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
> > +			r->capacity, num, behavior, &head, &free);
> > +		break;
> > +	default:
> > +		/* unsupported mode, shouldn't be here */
> > +		RTE_ASSERT(0);
> 
> Is RTE_ASSERT(0) the right choice for failure here?
> Unless built with assertions enabled, RTE_ASSERT(0) does nothing, and this
> function also does nothing but returns 0 as free_space, which may not be
> correct.
> 
> Maybe rte_panic() instead.
> It's an application bug to call this with the wrong SORING sync type.
> We cannot handle it gracefully, so better to fail early.

Yep, it is a bug in application in such case, but as rule of thumb we avoid panics in
the libs, even when user provided incorrect input.
At least, all lib/ring API function work like that - if given sync type is not supported,
then function doesn't touch the ring contents and fills 'free/available'
parameter with zero. So ring is sort-of unusable to the caller.

> Just an idea; I have no strong preference.

Ok, then I leave it like that.
Thanks for the review.
Konstantin

> > +		free = 0;
> > +		n = 0;
> > +	}
> > +
> > +	if (free_space != NULL)
> > +		*free_space = free - n;
> > +	return n;
> > +}
> > +

Re: [PATCH v4 0/2] few improvemnts for SORING lib

[Stephen Hemminger]

On Thu, 23 Apr 2026 10:16:23 +0100
Konstantin Ananyev <konstantin.ananyev@huawei.com> wrote:

> v3 -> v4
> - Remove too aggressive optimization (patch #1)
> - Fix AI review comments
> 
> v2 -> v3
> - fix MSVC complaints
> 
> v1 -> v2
> - fix formal API comments (doxygen complaints)
> - add section to release notes
> 
> First patch aims to improve enqueue/dequeue performance, specially
> for the cases with multiple workers lcores per stage.
> Second one introduces 'Peek API' similar to what we have for
> conventional rte_ring. Also it adds new test-cases for this new API.
> 
> Konstantin Ananyev (2):
>   ring: make soring to always finalize its own stage
>   ring: introduce peek API for soring
> 
>  app/test/meson.build                   |   1 +
>  app/test/test_soring_mt_stress.c       |  74 +++++++
>  app/test/test_soring_peek_stress.c     |  75 +++++++
>  app/test/test_soring_stress.c          |   3 +
>  app/test/test_soring_stress.h          |   1 +
>  app/test/test_soring_stress_impl.h     |  87 +-------
>  doc/guides/rel_notes/release_26_07.rst |   8 +
>  lib/ring/rte_soring.h                  | 267 ++++++++++++++++++++++++
>  lib/ring/soring.c                      | 272 ++++++++++++++++++++++---
>  9 files changed, 680 insertions(+), 108 deletions(-)
>  create mode 100644 app/test/test_soring_peek_stress.c
> 

I don't use soring, but looks good to me.

One related observation, is that would be good if soring tests used unit_test_runner
instead of having its own sub test call chain open coded.


AI had some feedback.

Series looks good overall. One issue on patch 2/2:
The doc comments for rte_soring_enqueue_bulk_start() and rte_soring_enqueue_burst_start() in lib/ring/rte_soring.h say:
User has to call appropriate enqueue_elem_finish() to copy objects
into the queue and complete given enqueue operation.
There is no rte_soring_enqueue_elem_finish(). The text was copy-pasted from rte_ring_peek.h, which uses an elem naming convention that soring does not follow. soring's actual finish functions are rte_soring_enqueue_finish() (objects only) and rte_soring_enqueux_finish() (objects plus meta). Please update the references.
The dequeue start docs are fine - they reference dequeue_finish(), which does exist.
Minor nits (optional):

__dequeue_elems() has a double space in its parameter list:
"void *objs,  void *meta"
rte_soring_dequeue_finish() uses 'num' in the header but 'n' in the implementation.
test_soring_peek_stress.c always pairs start with finish, so it doesn't exercise the peek-specific use cases (inspect-then-abandon, partial finish). Not a blocker; coverage of those could come later.

[PATCH v5 0/2] few improvemnts for SORING lib

[Konstantin Ananyev]

v4 -> v5
 - Fix formal API comments (Morten, Stephen/AI)
 - Add 2 new test-cases for peek API (Stephen/AI)

v3 -> v4
- Remove too aggressive optimization (patch #1)
- Fix AI review comments

v2 -> v3
- fix MSVC complaints

v1 -> v2
- fix formal API comments (doxygen complaints)
- add section to release notes

First patch aims to improve enqueue/dequeue performance, specially
for the cases with multiple workers lcores per stage.
Second one introduces 'Peek API' similar to what we have for
conventional rte_ring. Also it adds new test-cases for this new API.

Konstantin Ananyev (2):
  ring: make soring to always finalize its own stage
  ring: introduce peek API for soring

 app/test/meson.build                   |   1 +
 app/test/test_soring.c                 | 107 ++++++++++
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 269 ++++++++++++++++++++++++
 lib/ring/soring.c                      | 272 ++++++++++++++++++++++---
 10 files changed, 789 insertions(+), 108 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

-- 
2.51.0

[PATCH v5 1/2] ring: make soring to always finalize its own stage

[Konstantin Ananyev]

SORING internal finalize() function is MT-safe and can be called from
multiple places: from it's own stage release(), also from 'acquire()'
for next stage or even from consumer's 'dequeue().
But calling finalize() from not its own stage release() function
creates extra contention and might slow-down ring operations, especially
for the cases when we have multiple threads doing acquire/release
for the same stage.
We can't compeletely avoid calling finalize() from all these multiple
places, as it can in some rare cases break soring behavior.
But we can make release() for given stage to invoke it always.
That increases number of 'finalize()' operations done from 'release()'
for current stage, and helps to minimize number of finalize() calls from
other stages, which in turn, help to reduce the contention.
According to the soring_stress_autotest, for multiple workers (8+)
it reduces number of cycles spent by 1.5x-1.8x factor.
For l3fwd-like workload it improves things by ~20%.
For small number of workers, I didn't observe any serious change.
Note that it doesn't introduce any changes in functionality provided.

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
---
 lib/ring/soring.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 3b90521bdb..4bc2321fb5 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -37,24 +37,24 @@
  * plus current stage index).
  * 'release()' extracts old head value from provided ftoken and checks that
  * corresponding 'state[]' contains expected values(mostly for sanity
- * purposes).
- * Then it marks this state[] with 'SORING_ST_FINISH' flag to indicate
- * that given subset of objects was released.
- * After that, it checks does old head value equals to current tail value?
- * If yes, then it performs  'finalize()' operation, otherwise 'release()'
- * just returns (without spinning on stage tail value).
- * As updated state[] is shared by all threads, some other thread can do
- * 'finalize()' for given stage.
- * That allows 'release()' to avoid excessive waits on the tail value.
+ * purposes). Then it marks this state[] with 'SORING_ST_FINISH' flag to
+ * indicate that given subset of objects was released.
+ * After that, it calls 'finalize()'.
  * Main purpose of 'finalize()' operation is to walk through 'state[]'
  * from current stage tail up to its head, check state[] and move stage tail
  * through elements that already are in SORING_ST_FINISH state.
  * Along with that, corresponding state[] values are reset to zero.
- * Note that 'finalize()' for given stage can be done from multiple places:
+ * Note that updated state[] is shared by all threads, so
+ * 'finalize()' for given stage can be done from multiple places:
  * 'release()' for that stage or from 'acquire()' for next stage
  * even from consumer's 'dequeue()' - in case given stage is the last one.
  * So 'finalize()' has to be MT-safe and inside it we have to
- * guarantee that only one thread will update state[] and stage's tail values.
+ * guarantee that only one thread at a time will update state[] and
+ * stage's tail values (sort of critical-section).
+ * When multiple threads trying to do finalize() for the same stage,
+ * simultaneously one thread will win the race and do all the pending
+ * updates, while others will simply return (kind of try-lock scenario).
+ * That allows 'release()' to avoid excessive waits on the tail value.
  */
 
 #include "soring.h"
@@ -442,7 +442,7 @@ static __rte_always_inline void
 soring_release(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken)
 {
-	uint32_t idx, pos, tail;
+	uint32_t idx, pos;
 	struct soring_stage *stg;
 	union soring_state st;
 
@@ -479,12 +479,9 @@ soring_release(struct rte_soring *r, const void *objs,
 	rte_atomic_store_explicit(&r->state[idx].raw, st.raw,
 			rte_memory_order_relaxed);
 
-	/* try to do finalize(), if appropriate */
-	tail = rte_atomic_load_explicit(&stg->sht.tail.pos,
-			rte_memory_order_relaxed);
-	if (tail == pos)
-		__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
-				r->capacity);
+	/* now, try to do finalize() */
+	__rte_soring_stage_finalize(&stg->sht, stage, r->state, r->mask,
+			r->capacity);
 }
 
 /*
-- 
2.51.0

[PATCH v5 2/2] ring: introduce peek API for soring

[Konstantin Ananyev]

Follow the same pattern as conventional rte_ring and introduce peek API
for soring too.
Basically it provides similar functionality and similar opportunities
for the user, while similar constraints remain - only rings with
certain sync types are supported:
1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).

Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
---
 app/test/meson.build                   |   1 +
 app/test/test_soring.c                 | 107 ++++++++++
 app/test/test_soring_mt_stress.c       |  74 +++++++
 app/test/test_soring_peek_stress.c     |  75 +++++++
 app/test/test_soring_stress.c          |   3 +
 app/test/test_soring_stress.h          |   1 +
 app/test/test_soring_stress_impl.h     |  87 +-------
 doc/guides/rel_notes/release_26_07.rst |   8 +
 lib/ring/rte_soring.h                  | 269 +++++++++++++++++++++++++
 lib/ring/soring.c                      | 239 +++++++++++++++++++++-
 10 files changed, 774 insertions(+), 90 deletions(-)
 create mode 100644 app/test/test_soring_peek_stress.c

diff --git a/app/test/meson.build b/app/test/meson.build
index 7d458f9c07..033eaebb80 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -185,6 +185,7 @@ source_file_deps = {
     'test_service_cores.c': [],
     'test_soring.c': [],
     'test_soring_mt_stress.c': [],
+    'test_soring_peek_stress.c': [],
     'test_soring_stress.c': [],
     'test_spinlock.c': [],
     'test_stack.c': ['stack'],
diff --git a/app/test/test_soring.c b/app/test/test_soring.c
index 52852692d4..8ae63aa78e 100644
--- a/app/test/test_soring.c
+++ b/app/test/test_soring.c
@@ -408,6 +408,105 @@ test_soring_acquire_release(void)
 	return 0;
 }
 
+static int
+test_peek(struct rte_soring *sor, const uintptr_t enq_objs[],
+	uintptr_t deq_objs[], uint32_t max_elems)
+{
+	uint32_t i, nb_avail, nb_free, nb_deq, nb_enq;
+
+	/* fixed amount enqueue */
+	nb_free = 0;
+	nb_enq = rte_soring_enqueue_burst_start(sor, max_elems / 2, &nb_free);
+
+	SORING_TEST_ASSERT(nb_free, max_elems / 2);
+	SORING_TEST_ASSERT(nb_enq, max_elems / 2);
+
+	/* enqueue just one element */
+	rte_soring_enqueue_finish(sor, enq_objs, 1);
+
+	/* variable amount enqueue */
+	nb_free = 0;
+	nb_enq = rte_soring_enqueue_burst_start(sor, max_elems, &nb_free);
+
+	SORING_TEST_ASSERT(nb_free, 0);
+	SORING_TEST_ASSERT(nb_enq, max_elems - 1);
+
+	/* enqueue remaining elements */
+	rte_soring_enqueue_finish(sor, enq_objs + 1, nb_enq);
+
+	/* test no dequeue while stage 0 has not completed */
+	nb_deq = rte_soring_dequeue_bulk_start(sor, deq_objs, 1, NULL);
+	SORING_TEST_ASSERT(nb_deq, 0);
+
+	nb_deq = rte_soring_dequeue_burst_start(sor, deq_objs, 1, NULL);
+	SORING_TEST_ASSERT(nb_deq, 0);
+
+	move_forward_stage(sor, max_elems, 0);
+
+	nb_avail = 0;
+	memset(deq_objs, 0, sizeof(deq_objs[0]) * max_elems);
+	nb_deq = rte_soring_dequeue_bulk_start(sor, deq_objs, max_elems,
+			&nb_avail);
+
+	SORING_TEST_ASSERT(nb_deq, max_elems);
+	SORING_TEST_ASSERT(nb_avail, 0);
+
+	/* don't remove any elements from the ring */
+	rte_soring_dequeue_finish(sor, 0);
+
+	for (i = 0; i != nb_deq; i++)
+		RTE_TEST_ASSERT_EQUAL(deq_objs[i], enq_objs[i],
+			"dequeued != enqueued");
+
+	nb_avail = 0;
+	memset(deq_objs, 0, sizeof(deq_objs[0]) * max_elems);
+	nb_deq = rte_soring_dequeue_burst_start(sor, deq_objs,
+			max_elems, &nb_avail);
+
+	SORING_TEST_ASSERT(nb_deq, max_elems);
+	SORING_TEST_ASSERT(nb_avail, 0);
+
+	/* remove all dequeued elements from the ring */
+	rte_soring_dequeue_finish(sor, nb_deq);
+
+	for (i = 0; i != nb_deq; i++)
+		RTE_TEST_ASSERT_EQUAL(deq_objs[i], enq_objs[i],
+			"dequeued != enqueued");
+
+	return 0;
+}
+
+static int
+test_soring_enqdeq_peek(enum rte_ring_sync_type sync_type)
+{
+	struct rte_soring *sor;
+	int rc;
+	uint32_t i;
+	size_t sz;
+	struct rte_soring_param prm;
+	uintptr_t enq_objs[10];
+	uintptr_t deq_objs[10];
+
+	memset(&prm, 0, sizeof(prm));
+	for (i = 0; i != RTE_DIM(enq_objs); i++)
+		enq_objs[i] = i + 1;
+
+	/* init memory */
+	set_soring_init_param(&prm, "peek enq/deq", sizeof(enq_objs[0]),
+			RTE_DIM(enq_objs), 1, 0, sync_type, sync_type);
+	sz = rte_soring_get_memsize(&prm);
+	sor = rte_zmalloc(NULL, sz, RTE_CACHE_LINE_SIZE);
+	RTE_TEST_ASSERT_NOT_NULL(sor, "alloc failed for soring");
+	rc = rte_soring_init(sor, &prm);
+	RTE_TEST_ASSERT_SUCCESS(rc, "Failed to init soring");
+
+	rc = test_peek(sor, enq_objs, deq_objs, RTE_DIM(enq_objs));
+
+	rte_soring_dump(stdout, sor);
+	rte_free(sor);
+	return rc;
+}
+
 static int
 test_soring(void)
 {
@@ -432,6 +531,14 @@ test_soring(void)
 	if (test_soring_stages() < 0)
 		goto test_fail;
 
+	/* Test peek API for RTE_RING_SYNC_ST sync type */
+	if (test_soring_enqdeq_peek(RTE_RING_SYNC_ST) < 0)
+		goto test_fail;
+
+	/* Test peek API for RTE_RING_SYNC_MT_HTS sync type */
+	if (test_soring_enqdeq_peek(RTE_RING_SYNC_MT_HTS) < 0)
+		goto test_fail;
+
 	return 0;
 
 test_fail:
diff --git a/app/test/test_soring_mt_stress.c b/app/test/test_soring_mt_stress.c
index 2f90bb4598..b4493b19de 100644
--- a/app/test/test_soring_mt_stress.c
+++ b/app/test/test_soring_mt_stress.c
@@ -33,8 +33,82 @@ _st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
 	rte_soring_release(r, NULL, stage, num, token);
 }
 
+static const struct test_case tests[] = {
+	{
+		.name = "MT_DEQENQ-MT_STG1-PRCS",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG1-AVG",
+		.func = test_sym_mt1,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_rts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
+		.func = test_even_odd_mt5,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
+		.func = test_div_mt3,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
+		.func = test_div_mt3,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
 const struct test test_soring_mt_stress = {
 	.name = "MT",
 	.nb_case = RTE_DIM(tests),
 	.cases = tests,
 };
+
diff --git a/app/test/test_soring_peek_stress.c b/app/test/test_soring_peek_stress.c
new file mode 100644
index 0000000000..cbcea51c64
--- /dev/null
+++ b/app/test/test_soring_peek_stress.c
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2026 Huawei Technologies Co., Ltd
+ */
+
+#include "test_soring_stress_impl.h"
+
+static inline uint32_t
+_st_ring_dequeue_burst(struct rte_soring *r, void **obj, uint32_t n,
+	uint32_t *avail)
+{
+	uint32_t m;
+
+	m = rte_soring_dequeue_burst_start(r, obj, n, avail);
+	if (m != 0)
+		rte_soring_dequeue_finish(r, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_enqueue_bulk(struct rte_soring *r, void * const *obj, uint32_t n,
+	uint32_t *free)
+{
+	uint32_t m;
+
+	m = rte_soring_enqueue_bulk_start(r, n, free);
+	if (m != 0)
+		rte_soring_enqueue_finish(r, obj, m);
+	return m;
+}
+
+static inline uint32_t
+_st_ring_acquire_burst(struct rte_soring *r, uint32_t stage, void **obj,
+	uint32_t num, uint32_t *token, uint32_t *avail)
+{
+	return rte_soring_acquire_burst(r, obj, stage, num, token, avail);
+}
+
+static inline void
+_st_ring_release(struct rte_soring *r, uint32_t stage, uint32_t token,
+	void * const *obj, uint32_t num)
+{
+	RTE_SET_USED(obj);
+	rte_soring_release(r, NULL, stage, num, token);
+}
+
+static const struct test_case tests[] = {
+
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
+		.func = test_sym_mt_hts4,
+		.wfunc = test_worker_avg,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-PRCS",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_prcs,
+	},
+	{
+		.name = "ST_DEQENQ-MT_STG4-AVG",
+		.func = test_stdenq_stage4,
+		.wfunc = test_worker_avg,
+	},
+};
+
+const struct test test_soring_peek_stress = {
+	.name = "PEEK",
+	.nb_case = RTE_DIM(tests),
+	.cases = tests,
+};
+
diff --git a/app/test/test_soring_stress.c b/app/test/test_soring_stress.c
index e5655d49cb..f8fda64378 100644
--- a/app/test/test_soring_stress.c
+++ b/app/test/test_soring_stress.c
@@ -37,6 +37,9 @@ test_ring_stress(void)
 	n = 0;
 	k = 0;
 
+	n += test_soring_peek_stress.nb_case;
+	k += run_test(&test_soring_peek_stress);
+
 	n += test_soring_mt_stress.nb_case;
 	k += run_test(&test_soring_mt_stress);
 
diff --git a/app/test/test_soring_stress.h b/app/test/test_soring_stress.h
index 2341cc9f83..f988244410 100644
--- a/app/test/test_soring_stress.h
+++ b/app/test/test_soring_stress.h
@@ -32,3 +32,4 @@ struct test {
 };
 
 extern const struct test test_soring_mt_stress;
+extern const struct test test_soring_peek_stress;
diff --git a/app/test/test_soring_stress_impl.h b/app/test/test_soring_stress_impl.h
index 015825223d..0efc7e46a0 100644
--- a/app/test/test_soring_stress_impl.h
+++ b/app/test/test_soring_stress_impl.h
@@ -683,7 +683,7 @@ role_mask_denq_st(uint32_t nb_stage, uint32_t role_mask[RTE_MAX_LCORE])
 }
 
 
-static int
+static int __rte_unused
 test_sym_mt1(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -694,7 +694,7 @@ test_sym_mt1(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -706,7 +706,7 @@ test_sym_mt4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_rts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -718,7 +718,7 @@ test_sym_mt_rts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_sym_mt_hts4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -730,7 +730,7 @@ test_sym_mt_hts4(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_stdenq_stage4(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -743,7 +743,7 @@ test_stdenq_stage4(int (*test)(void *))
 }
 
 
-static int
+static int __rte_unused
 test_even_odd_mt5(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -755,7 +755,7 @@ test_even_odd_mt5(int (*test)(void *))
 			nb_stage, role_mask);
 }
 
-static int
+static int __rte_unused
 test_div_mt3(int (*test)(void *))
 {
 	uint32_t role_mask[RTE_MAX_LCORE];
@@ -766,76 +766,3 @@ test_div_mt3(int (*test)(void *))
 	return test_mt(test, RTE_RING_SYNC_MT, RTE_RING_SYNC_MT,
 			nb_stage, role_mask);
 }
-
-static const struct test_case tests[] = {
-	{
-		.name = "MT_DEQENQ-MT_STG1-PRCS",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG1-AVG",
-		.func = test_sym_mt1,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTRTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_rts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-PRCS",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MTHTS_DEQENQ-MT_STG4-AVG",
-		.func = test_sym_mt_hts4,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-PRCS",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG5-1:1-AVG",
-		.func = test_even_odd_mt5,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "MT_DEQENQ-MT_STG3-1:3-PRCS",
-		.func = test_div_mt3,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "MT_DEQENQ_MT_STG3-1:3-AVG",
-		.func = test_div_mt3,
-		.wfunc = test_worker_avg,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-PRCS",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_prcs,
-	},
-	{
-		.name = "ST_DEQENQ-MT_STG4-AVG",
-		.func = test_stdenq_stage4,
-		.wfunc = test_worker_avg,
-	},
-};
diff --git a/doc/guides/rel_notes/release_26_07.rst b/doc/guides/rel_notes/release_26_07.rst
index f012d47a4b..313f00f6df 100644
--- a/doc/guides/rel_notes/release_26_07.rst
+++ b/doc/guides/rel_notes/release_26_07.rst
@@ -63,6 +63,14 @@ New Features
     ``rte_eal_init`` and the application is responsible for probing each device,
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
+* **Added peek style API for ``rte_soring``.**
+
+  For sorings with producer/consumer in ``RTE_RING_SYNC_ST``,
+  ``RTE_RING_SYNC_MT_HTS`` mode, provide the ability to split enqueue/dequeue
+  operation into two phases (enqueue/dequeue start and enqueue/dequeue finish).
+  This allows the user to inspect objects in the ring without removing them
+  (aka MT safe peek).
+
 
 Removed Items
 -------------
diff --git a/lib/ring/rte_soring.h b/lib/ring/rte_soring.h
index 95c3cc4080..3b308f70fd 100644
--- a/lib/ring/rte_soring.h
+++ b/lib/ring/rte_soring.h
@@ -607,6 +607,275 @@ void
 rte_soring_releasx(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t stage, uint32_t n, uint32_t ftoken);
 
+/**
+ * SORING Peek API
+ * Same as with rte_ring, for some sync modes it is possible to split
+ * public enqueue/dequeue API into two phases:
+ * - enqueue/dequeue start
+ * - enqueue/dequeue finish
+ * That allows user to inspect objects in the soring without removing them
+ * from it (aka MT safe peek).
+ * Note that right now this new API is available only for two sync modes:
+ * 1) Single Producer/Single Consumer (RTE_RING_SYNC_ST)
+ * 2) Serialized Producer/Serialized Consumer (RTE_RING_SYNC_MT_HTS).
+ * It is a user responsibility to create/init soring with appropriate sync
+ * modes selected for enqueue/dequeue.
+ * For more information, please refer to corresponding rte_ring peek API.
+ */
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue exact number of objects on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate rte_soring_enqueue_finish() or
+ * rte_soring_enqueux_finish() to copy objects into the queue and complete
+ * given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   Actual number of objects that can be enqueued, either 0 or n.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to enqueue several objects (up to 'n') on the soring.
+ * Note that no actual objects are put in the queue by this function,
+ * it just reserves for user such ability.
+ * User has to call appropriate rte_soring_enqueue_finish() or
+ * rte_soring_enqueux_finish() to copy objects into the queue and complete
+ * given enqueue operation.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param n
+ *   The number of objects to add in the soring.
+ * @param free_space
+ *   if non-NULL, returns the amount of space in the soring after the
+ *   enqueue operation has finished.
+ * @return
+ *   Actual number of objects  that can be enqueued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to enqueue several objects plus metadata on the soring.
+ * Note that number of objects to enqueue should not exceed previous
+ * enqueue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to enqueue.
+ *   Size of objects to enqueue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to an array of metadata values for each object to enqueue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param n
+ *   The number of objects to add in the soring from the 'objs'.
+ */
+__rte_experimental
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues exactly requested number of objects or none.
+ * Note that user has to call appropriate rte_soring_dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   Actual number of objects dequeued, either 0 or 'num'.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate rte_soring_dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Start to dequeue several objects plus metadata from the soring.
+ * Dequeues up to requested number of objects.
+ * Note that user has to call appropriate rte_soring_dequeue_finish()
+ * to complete given dequeue operation and actually remove objects from
+ * the soring.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param objs
+ *   A pointer to an array of objects to dequeue.
+ *   Size of objects to dequeue must be the same value as 'elem_size' parameter
+ *   used while creating the soring. Otherwise the results are undefined.
+ * @param meta
+ *   A pointer to array of metadata values for each object to dequeue.
+ *   Note that if user not using object metadata values, then this parameter
+ *   can be NULL.
+ *   Size of elements in this array must be the same value as 'meta_size'
+ *   parameter used while creating the soring. If user created the soring with
+ *   'meta_size' value equals zero, then 'meta' parameter should be NULL.
+ *   Otherwise the results are undefined.
+ * @param num
+ *   The number of objects to dequeue from the soring into the objs.
+ * @param available
+ *   If non-NULL, returns the number of remaining soring entries after the
+ *   dequeue has finished.
+ * @return
+ *   Actual number of objects dequeued.
+ */
+__rte_experimental
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Complete to dequeue several objects from the soring.
+ * Note that number of objects to dequeue should not exceed previous
+ * dequeue_start return value.
+ *
+ * @param r
+ *   A pointer to the soring structure.
+ * @param num
+ *   The number of objects to remove from the soring.
+ */
+__rte_experimental
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t num);
+
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/ring/soring.c b/lib/ring/soring.c
index 4bc2321fb5..e9c75619fe 100644
--- a/lib/ring/soring.c
+++ b/lib/ring/soring.c
@@ -249,6 +249,28 @@ __rte_soring_stage_move_head(struct soring_stage_headtail *d,
 	return n;
 }
 
+static inline void
+__enqueue_elems(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_enqueue_elems(&r[1], objs, r->size, head & r->mask,
+		r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
+static inline void
+__dequeue_elems(const struct rte_soring *r, void *objs, void *meta,
+	uint32_t head, uint32_t n)
+{
+	__rte_ring_do_dequeue_elems(objs, &r[1], r->size, head & r->mask,
+			r->esize, n);
+	if (meta != NULL)
+		__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
+			head & r->mask, r->msize, n);
+}
+
 static inline uint32_t
 soring_enqueue(struct rte_soring *r, const void *objs,
 	const void *meta, uint32_t n, enum rte_ring_queue_behavior behavior,
@@ -265,11 +287,7 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	n = __rte_soring_move_prod_head(r, n, behavior, st,
 			&prod_head, &prod_next, &nb_free);
 	if (n != 0) {
-		__rte_ring_do_enqueue_elems(&r[1], objs, r->size,
-			prod_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_enqueue_elems(r->meta, meta, r->size,
-				prod_head & r->mask, r->msize, n);
+		__enqueue_elems(r, objs, meta, prod_head, n);
 		__rte_soring_update_tail(&r->prod, st, prod_head, prod_next, 1);
 	}
 
@@ -278,6 +296,70 @@ soring_enqueue(struct rte_soring *r, const void *objs,
 	return n;
 }
 
+static inline uint32_t
+soring_enqueue_start(struct rte_soring *r, uint32_t num,
+	enum rte_ring_queue_behavior behavior, uint32_t *free_space)
+{
+	enum rte_ring_sync_type st;
+	uint32_t free, head, n, next;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->prod.ht, &r->cons.ht,
+			r->capacity, RTE_RING_SYNC_ST, num, behavior,
+			&head, &next, &free);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->prod.hts, &r->cons.ht,
+			r->capacity, num, behavior, &head, &free);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		free = 0;
+		n = 0;
+	}
+
+	if (free_space != NULL)
+		*free_space = free - n;
+	return n;
+}
+
+static inline void
+soring_enqueue_finish(struct rte_soring *r, const void *objs, const void *meta,
+	uint32_t num)
+{
+	enum rte_ring_sync_type st;
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	st = r->prod.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->prod.ht, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_st_set_head_tail(&r->prod.ht, tail, n, 1);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->prod.hts, &tail, num);
+		if (n != 0)
+			__enqueue_elems(r, objs, meta, tail, n);
+		__rte_ring_hts_set_head_tail(&r->prod.hts, tail, n, 1);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 static inline uint32_t
 soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	uint32_t num, enum rte_ring_queue_behavior behavior,
@@ -312,11 +394,7 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 
 	/* we have some elems to consume */
 	if (n != 0) {
-		__rte_ring_do_dequeue_elems(objs, &r[1], r->size,
-			cons_head & r->mask, r->esize, n);
-		if (meta != NULL)
-			__rte_ring_do_dequeue_elems(meta, r->meta, r->size,
-				cons_head & r->mask, r->msize, n);
+		__dequeue_elems(r, objs, meta, cons_head, n);
 		__rte_soring_update_tail(&r->cons, st, cons_head, cons_next, 0);
 	}
 
@@ -325,6 +403,69 @@ soring_dequeue(struct rte_soring *r, void *objs, void *meta,
 	return n;
 }
 
+static inline uint32_t
+soring_dequeue_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, enum rte_ring_queue_behavior behavior,
+	uint32_t *available)
+{
+	enum rte_ring_sync_type st;
+	uint32_t avail, head, next, n, ns;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+	RTE_ASSERT(meta == NULL || r->meta != NULL);
+
+	ns = r->nb_stage - 1;
+	st = r->cons.ht.sync_type;
+
+	switch (st) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_headtail_move_head(&r->cons.ht, &r->stage[ns].ht,
+			0, RTE_RING_SYNC_ST, num, behavior, &head, &next,
+			&avail);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_move_head(&r->cons.hts, &r->stage[ns].ht,
+			0, num, behavior, &head, &avail);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+		avail = 0;
+		n = 0;
+	}
+
+	/* we have some elems to consume */
+	if (n != 0)
+		__dequeue_elems(r, objs, meta, head, n);
+
+	if (available != NULL)
+		*available = avail - n;
+	return n;
+}
+
+
+static inline void
+soring_dequeue_finish(struct rte_soring *r, uint32_t num)
+{
+	uint32_t n, tail;
+
+	RTE_ASSERT(r != NULL && r->nb_stage > 0);
+
+	switch (r->cons.ht.sync_type) {
+	case RTE_RING_SYNC_ST:
+		n = __rte_ring_st_get_tail(&r->cons.ht, &tail, num);
+		__rte_ring_st_set_head_tail(&r->cons.ht, tail, n, 0);
+		break;
+	case RTE_RING_SYNC_MT_HTS:
+		n = __rte_ring_hts_get_tail(&r->cons.hts, &tail, num);
+		__rte_ring_hts_set_head_tail(&r->cons.hts, tail, n, 0);
+		break;
+	default:
+		/* unsupported mode, shouldn't be here */
+		RTE_ASSERT(0);
+	}
+}
+
 /*
  * Verify internal SORING state.
  * WARNING: if expected value is not equal to actual one, it means that for
@@ -629,3 +770,81 @@ rte_soring_free_count(const struct rte_soring *r)
 {
 	return r->capacity - rte_soring_count(r);
 }
+
+/*
+ * SORING public peek API
+ */
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_bulk_start, 26.07)
+uint32_t
+rte_soring_enqueue_bulk_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_FIXED, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_burst_start, 26.07)
+uint32_t
+rte_soring_enqueue_burst_start(struct rte_soring *r, uint32_t n,
+	uint32_t *free_space)
+{
+	return soring_enqueue_start(r, n, RTE_RING_QUEUE_VARIABLE, free_space);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueue_finish, 26.07)
+void
+rte_soring_enqueue_finish(struct rte_soring *r, const void *objs, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, NULL, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_enqueux_finish, 26.07)
+void
+rte_soring_enqueux_finish(struct rte_soring *r, const void *objs,
+	const void *meta, uint32_t n)
+{
+	soring_enqueue_finish(r, objs, meta, n);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeue_bulk_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_bulk_start, 26.07)
+uint32_t
+rte_soring_dequeux_bulk_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_FIXED,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_burst_start, 26.07)
+uint32_t
+rte_soring_dequeue_burst_start(struct rte_soring *r, void *objs, uint32_t num,
+	uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, NULL, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeux_burst_start, 26.07)
+uint32_t
+rte_soring_dequeux_burst_start(struct rte_soring *r, void *objs, void *meta,
+	uint32_t num, uint32_t *available)
+{
+	return soring_dequeue_start(r, objs, meta, num, RTE_RING_QUEUE_VARIABLE,
+		available);
+}
+
+RTE_EXPORT_EXPERIMENTAL_SYMBOL(rte_soring_dequeue_finish, 26.07)
+void
+rte_soring_dequeue_finish(struct rte_soring *r, uint32_t n)
+{
+	soring_dequeue_finish(r, n);
+}
-- 
2.51.0