[PATCH 1/2] drm: add drm_edid_to_eld helper extracting SADs from EDID

["Rafał Miłecki" <zajec5@gmail.com>]

Some devices (ATI/AMD cards) don't support passing ELD struct to the
hardware but just require filling specific registers and then the
hardware/firmware does the rest. In such cases we need to read the info
from SAD blocks and put them in the correct registers.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
Changes since RFC:
1) Fixed allocation (and kcalloc instead of kzalloc)
2) Don't duplicate defines for audio codecs
3) Some variables scope
---
 drivers/gpu/drm/drm_edid.c |   58 ++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_edid.h     |    9 +++++++
 2 files changed, 67 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index e2acfdb..89ae211 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2511,6 +2511,64 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 EXPORT_SYMBOL(drm_edid_to_eld);
 
 /**
+ * drm_edid_to_sad - extracts SADs from EDID
+ * @edid: EDID to parse
+ * @sads: pointer that will be set to the extracted SADs
+ *
+ * Looks for CEA EDID block and extracts SADs (Short Audio Descriptors) from it.
+ *
+ * Return number of found SADs or negative number on error.
+ */
+int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
+{
+	int count = 0;
+	int i, start, end, dbl;
+	u8 *cea;
+
+	cea = drm_find_cea_extension(edid);
+	if (!cea) {
+		DRM_DEBUG_KMS("SAD: no CEA Extension found\n");
+		return -ENOENT;
+	}
+
+	if (cea_revision(cea) < 3) {
+		DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
+		return -ENOTSUPP;
+	}
+
+	if (cea_db_offsets(cea, &start, &end)) {
+		DRM_DEBUG_KMS("SAD: invalid data block offsets\n");
+		return -EPROTO;
+	}
+
+	for_each_cea_db(cea, i, start, end) {
+		u8 *db = &cea[i];
+
+		if (cea_db_tag(db) == AUDIO_BLOCK) {
+			dbl = cea_db_payload_len(db);
+			int j;
+
+			count = dbl / 3; /* SAD is 3B */
+			*sads = kcalloc(count, sizeof(**sads), GFP_KERNEL);
+			if (!*sads)
+				return -ENOMEM;
+			for (j = 0; j < count; j++) {
+				u8 *sad = &db[1 + j * 3];
+
+				(*sads)[j].format = (sad[0] & 0x78) >> 3;
+				(*sads)[j].channels = sad[0] & 0x7;
+				(*sads)[j].freq = sad[1] & 0x7F;
+				(*sads)[j].byte2 = sad[2];
+			}
+			break;
+		}
+	}
+
+	return count;
+}
+EXPORT_SYMBOL(drm_edid_to_sad);
+
+/**
  * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in millisecond
  * @connector: connector associated with the HDMI/DP sink
  * @mode: the display mode
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 5da1b4a..fc481fc 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -244,12 +244,21 @@ struct edid {
 
 #define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
 
+/* Short Audio Descriptor */
+struct cea_sad {
+	u8 format;
+	u8 channels; /* max number of channels - 1 */
+	u8 freq;
+	u8 byte2; /* meaning depends on format */
+};
+
 struct drm_encoder;
 struct drm_connector;
 struct drm_display_mode;
 struct hdmi_avi_infoframe;
 
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
+int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
 int drm_av_sync_delay(struct drm_connector *connector,
 		      struct drm_display_mode *mode);
 struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
-- 
1.7.10.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel