From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
Jyri Sarha <jsarha@ti.com>,
dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 07/24] drm/omap: Manage the usable omap_dss_device list within omap_drm_private
Date: Tue, 27 Feb 2018 15:19:50 +0200 [thread overview]
Message-ID: <13829847.2H9ACWEa3t@avalon> (raw)
In-Reply-To: <1518428694-18018-8-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Monday, 12 February 2018 11:44:37 EET Tomi Valkeinen wrote:
> From: Peter Ujfalusi <peter.ujfalusi@ti.com>
>
> Instead of reaching back to DSS to iterate through the dss_devices every
> time, use an internal array where we store the available and usable
> dss_devices.
>
> At the same time remove the omapdss_device_is_connected() check from
> omap_modeset_init() as it became irrelevant: We are not adding dssdevs
> if their connect failed.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/omap_drv.c | 95 ++++++++++++++++++++---------------
> drivers/gpu/drm/omapdrm/omap_drv.h | 3 ++
> 2 files changed, 62 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 57d11f9aeead..869a8ab6aa4e
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -149,18 +149,27 @@ static int get_connector_type(struct omap_dss_device
> *dssdev) }
> }
>
> -static void omap_disconnect_dssdevs(void)
> +static void omap_disconnect_dssdevs(struct drm_device *ddev)
> {
> - struct omap_dss_device *dssdev = NULL;
> + struct omap_drm_private *priv = ddev->dev_private;
> + unsigned int i;
> +
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
>
> - for_each_dss_dev(dssdev)
> dssdev->driver->disconnect(dssdev);
> + priv->dssdevs[i] = NULL;
> + omap_dss_put_device(dssdev);
> + }
> +
> + priv->num_dssdevs = 0;
> }
>
> -static int omap_connect_dssdevs(void)
> +static int omap_connect_dssdevs(struct drm_device *ddev)
> {
> - int r;
> + struct omap_drm_private *priv = ddev->dev_private;
> struct omap_dss_device *dssdev = NULL;
> + int r;
>
> if (!omapdss_stack_is_ready())
> return -EPROBE_DEFER;
> @@ -173,6 +182,14 @@ static int omap_connect_dssdevs(void)
> } else if (r) {
> dev_warn(dssdev->dev, "could not connect display: %s\n",
> dssdev->name);
> + } else {
> + omap_dss_get_device(dssdev);
> + priv->dssdevs[priv->num_dssdevs++] = dssdev;
> + if (priv->num_dssdevs == ARRAY_SIZE(priv->dssdevs)) {
> + /* To balance the 'for_each_dss_dev' loop */
> + omap_dss_put_device(dssdev);
> + break;
> + }
> }
> }
>
> @@ -183,7 +200,7 @@ static int omap_connect_dssdevs(void)
> * if we are deferring probe, we disconnect the devices we previously
> * connected
> */
> - omap_disconnect_dssdevs();
> + omap_disconnect_dssdevs(ddev);
>
> return r;
> }
> @@ -208,7 +225,7 @@ static int omap_modeset_init(struct drm_device *dev)
> int num_ovls = priv->dispc_ops->get_num_ovls();
> int num_mgrs = priv->dispc_ops->get_num_mgrs();
> int num_crtcs, crtc_idx, plane_idx;
> - int ret;
> + int ret, i;
i is never negative, you can make it an unsigned int. Same for the other
functions below.
Apart from that,
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> u32 plane_crtc_mask;
>
> drm_mode_config_init(dev);
> @@ -225,11 +242,7 @@ static int omap_modeset_init(struct drm_device *dev)
> * configuration does not match the expectations or exceeds
> * the available resources, the configuration is rejected.
> */
> - num_crtcs = 0;
> - for_each_dss_dev(dssdev)
> - if (omapdss_device_is_connected(dssdev))
> - num_crtcs++;
> -
> + num_crtcs = priv->num_dssdevs;
> if (num_crtcs > num_mgrs || num_crtcs > num_ovls ||
> num_crtcs > ARRAY_SIZE(priv->crtcs) ||
> num_crtcs > ARRAY_SIZE(priv->planes) ||
> @@ -247,15 +260,13 @@ static int omap_modeset_init(struct drm_device *dev)
>
> crtc_idx = 0;
> plane_idx = 0;
> - for_each_dss_dev(dssdev) {
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
> struct drm_connector *connector;
> struct drm_encoder *encoder;
> struct drm_plane *plane;
> struct drm_crtc *crtc;
>
> - if (!omapdss_device_is_connected(dssdev))
> - continue;
> -
> encoder = omap_encoder_init(dev, dssdev);
> if (!encoder)
> return -ENOMEM;
> @@ -329,11 +340,14 @@ static int omap_modeset_init(struct drm_device *dev)
> /*
> * Enable the HPD in external components if supported
> */
> -static void omap_modeset_enable_external_hpd(void)
> +static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
> {
> - struct omap_dss_device *dssdev = NULL;
> + struct omap_drm_private *priv = ddev->dev_private;
> + int i;
> +
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
>
> - for_each_dss_dev(dssdev) {
> if (dssdev->driver->enable_hpd)
> dssdev->driver->enable_hpd(dssdev);
> }
> @@ -342,11 +356,14 @@ static void omap_modeset_enable_external_hpd(void)
> /*
> * Disable the HPD in external components if supported
> */
> -static void omap_modeset_disable_external_hpd(void)
> +static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
> {
> - struct omap_dss_device *dssdev = NULL;
> + struct omap_drm_private *priv = ddev->dev_private;
> + int i;
> +
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
>
> - for_each_dss_dev(dssdev) {
> if (dssdev->driver->disable_hpd)
> dssdev->driver->disable_hpd(dssdev);
> }
> @@ -543,7 +560,7 @@ static int pdev_probe(struct platform_device *pdev)
>
> omap_crtc_pre_init();
>
> - ret = omap_connect_dssdevs();
> + ret = omap_connect_dssdevs(ddev);
> if (ret)
> goto err_crtc_uninit;
>
> @@ -583,7 +600,7 @@ static int pdev_probe(struct platform_device *pdev)
> omap_fbdev_init(ddev);
>
> drm_kms_helper_poll_init(ddev);
> - omap_modeset_enable_external_hpd();
> + omap_modeset_enable_external_hpd(ddev);
>
> /*
> * Register the DRM device with the core and the connectors with
> @@ -596,7 +613,7 @@ static int pdev_probe(struct platform_device *pdev)
> return 0;
>
> err_cleanup_helpers:
> - omap_modeset_disable_external_hpd();
> + omap_modeset_disable_external_hpd(ddev);
> drm_kms_helper_poll_fini(ddev);
>
> omap_fbdev_free(ddev);
> @@ -606,7 +623,7 @@ static int pdev_probe(struct platform_device *pdev)
> err_gem_deinit:
> omap_gem_deinit(ddev);
> destroy_workqueue(priv->wq);
> - omap_disconnect_dssdevs();
> + omap_disconnect_dssdevs(ddev);
> err_crtc_uninit:
> omap_crtc_pre_uninit();
> drm_dev_unref(ddev);
> @@ -622,7 +639,7 @@ static int pdev_remove(struct platform_device *pdev)
>
> drm_dev_unregister(ddev);
>
> - omap_modeset_disable_external_hpd();
> + omap_modeset_disable_external_hpd(ddev);
> drm_kms_helper_poll_fini(ddev);
>
> omap_fbdev_free(ddev);
> @@ -636,7 +653,7 @@ static int pdev_remove(struct platform_device *pdev)
>
> destroy_workqueue(priv->wq);
>
> - omap_disconnect_dssdevs();
> + omap_disconnect_dssdevs(ddev);
> omap_crtc_pre_uninit();
>
> drm_dev_unref(ddev);
> @@ -645,11 +662,14 @@ static int pdev_remove(struct platform_device *pdev)
> }
>
> #ifdef CONFIG_PM_SLEEP
> -static int omap_drm_suspend_all_displays(void)
> +static int omap_drm_suspend_all_displays(struct drm_device *ddev)
> {
> - struct omap_dss_device *dssdev = NULL;
> + struct omap_drm_private *priv = ddev->dev_private;
> + int i;
> +
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
>
> - for_each_dss_dev(dssdev) {
> if (!dssdev->driver)
> continue;
>
> @@ -664,11 +684,14 @@ static int omap_drm_suspend_all_displays(void)
> return 0;
> }
>
> -static int omap_drm_resume_all_displays(void)
> +static int omap_drm_resume_all_displays(struct drm_device *ddev)
> {
> - struct omap_dss_device *dssdev = NULL;
> + struct omap_drm_private *priv = ddev->dev_private;
> + int i;
> +
> + for (i = 0; i < priv->num_dssdevs; i++) {
> + struct omap_dss_device *dssdev = priv->dssdevs[i];
>
> - for_each_dss_dev(dssdev) {
> if (!dssdev->driver)
> continue;
>
> @@ -688,7 +711,7 @@ static int omap_drm_suspend(struct device *dev)
> drm_kms_helper_poll_disable(drm_dev);
>
> drm_modeset_lock_all(drm_dev);
> - omap_drm_suspend_all_displays();
> + omap_drm_suspend_all_displays(drm_dev);
> drm_modeset_unlock_all(drm_dev);
>
> return 0;
> @@ -699,7 +722,7 @@ static int omap_drm_resume(struct device *dev)
> struct drm_device *drm_dev = dev_get_drvdata(dev);
>
> drm_modeset_lock_all(drm_dev);
> - omap_drm_resume_all_displays();
> + omap_drm_resume_all_displays(drm_dev);
> drm_modeset_unlock_all(drm_dev);
>
> drm_kms_helper_poll_enable(drm_dev);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h
> b/drivers/gpu/drm/omapdrm/omap_drv.h index ba322c519999..c9e433a91cd0
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -50,6 +50,9 @@ struct omap_drm_private {
>
> const struct dispc_ops *dispc_ops;
>
> + unsigned int num_dssdevs;
> + struct omap_dss_device *dssdevs[8];
> +
> unsigned int num_crtcs;
> struct drm_crtc *crtcs[8];
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-02-27 13:19 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-12 9:44 [PATCH 00/24] drm/omap: misc patches Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 01/24] drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called Tomi Valkeinen
2018-02-27 11:28 ` Laurent Pinchart
2018-02-27 11:53 ` Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 02/24] drm/omap: cleanup fbdev init/free Tomi Valkeinen
2018-02-27 11:38 ` Laurent Pinchart
2018-02-28 8:49 ` Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 03/24] drm/omap: add HPD support to connector-dvi Tomi Valkeinen
2018-02-27 12:58 ` Laurent Pinchart
2018-02-28 9:00 ` Tomi Valkeinen
[not found] ` <1518428694-18018-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2018-02-12 9:44 ` [PATCH 04/24] dt-bindings: display: add HPD gpio to DVI connector Tomi Valkeinen
2018-02-19 0:11 ` Rob Herring
2018-02-27 13:01 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 05/24] drm/omap: Use devm_kzalloc() to allocate omap_drm_private Tomi Valkeinen
2018-02-27 13:03 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 06/24] drm/omap: Allocate drm_device earlier and unref it as last step Tomi Valkeinen
2018-02-27 13:07 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 07/24] drm/omap: Manage the usable omap_dss_device list within omap_drm_private Tomi Valkeinen
2018-02-27 13:19 ` Laurent Pinchart [this message]
2018-02-12 9:44 ` [PATCH 08/24] drm/omap: Separate the dssdevs array setup from the connect function Tomi Valkeinen
2018-02-27 13:23 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 09/24] drm/omap: Do dss_device (display) ordering in omap_drv.c Tomi Valkeinen
2018-02-27 13:26 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 10/24] drm/omap: dss: Remove display ordering from dss/display.c Tomi Valkeinen
2018-02-27 13:30 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 11/24] drm/omap: Add kernel parameter to specify the desired display order Tomi Valkeinen
2018-02-27 13:35 ` Laurent Pinchart
2018-02-28 9:16 ` Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 12/24] drm/omap: Init fbdev emulation only when we have displays Tomi Valkeinen
2018-02-27 13:36 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 13/24] drm/omap: remove leftover enums Tomi Valkeinen
2018-02-27 13:36 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 14/24] drm/omap: dispc: disp_wb_setup to check return code Tomi Valkeinen
2018-02-27 13:38 ` Laurent Pinchart
2018-02-12 9:44 ` [PATCH 15/24] drm/omap: Add pclk setting case when channel is DSS_WB Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 16/24] drm/omap: set WB channel-in in wb_setup() Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 17/24] drm/omap: fix WBDELAYCOUNT for HDMI Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 18/24] drm/omap: fix WBDELAYCOUNT with interlace Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 19/24] drm/omap: fix WB height " Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 20/24] drm/omap: fix scaling limits for WB Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 21/24] drm/omap: add writeback funcs to dispc_ops Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 22/24] drm/omap: fix maximum sizes Tomi Valkeinen
2018-02-27 13:42 ` Laurent Pinchart
2018-02-28 9:10 ` Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 23/24] drm/omap: Allow HDMI audio setup even if we do not have video configured Tomi Valkeinen
2018-02-12 9:44 ` [PATCH 24/24] drm/omap: cleanup color space conversion Tomi Valkeinen
2018-02-27 14:08 ` Laurent Pinchart
2018-02-28 10:09 ` Tomi Valkeinen
2018-02-28 10:13 ` Laurent Pinchart
2018-02-28 10:22 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13829847.2H9ACWEa3t@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jsarha@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox