* [PATCH 2/4] drm/plane-helper: Add drm_plane_helper_check_update() (v3)
[not found] <1401376014-24845-1-git-send-email-matthew.d.roper@intel.com>
2014-05-29 15:06 ` [PATCH 1/4] drm: Check CRTC compatibility in setplane Matt Roper
@ 2014-05-29 15:06 ` Matt Roper
1 sibling, 0 replies; 3+ messages in thread
From: Matt Roper @ 2014-05-29 15:06 UTC (permalink / raw)
To: intel-gfx; +Cc: dri-devel
Pull the parameter checking from drm_primary_helper_update() out into
its own function; drivers that provide their own setplane()
implementations rather than using the helper may still want to share
this parameter checking logic.
A few of the checks here were also updated based on suggestions by
Ville Syrjälä.
v3:
- s/primary_helper/plane_helper/ --- this checking logic may be useful
for other types of planes as well.
- Fix visibility check (need to dereference visibility pointer)
v2:
- Pass src/dest/clip rects and min/max scaling down to helper to avoid
duplication of effort between helper and drivers (suggested by
Ville).
- Allow caller to specify whether the primary plane should be
updatable while the crtc is disabled.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/drm_plane_helper.c | 124 ++++++++++++++++++++++++++++---------
include/drm/drm_plane_helper.h | 22 +++++++
2 files changed, 116 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index b601233..fd401fc 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -66,6 +66,79 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
}
/**
+ * drm_plane_helper_check_update() - Check plane update for validity
+ * @plane: plane object to update
+ * @crtc: owning CRTC of owning plane
+ * @fb: framebuffer to flip onto plane
+ * @src: source coordinates in 16.16 fixed point
+ * @dest: integer destination coordinates
+ * @clip: integer clipping coordinates
+ * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
+ * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
+ * @can_position: is it legal to position the plane such that it
+ * doesn't cover the entire crtc? This will generally
+ * only be false for primary planes.
+ * @can_update_disabled: can the plane be updated while the crtc
+ * is disabled?
+ * @visible: output parameter indicating whether plane is still visible after
+ * clipping
+ *
+ * Checks that a desired plane update is valid. Drivers that provide
+ * their own plane handling rather than helper-provided implementations may
+ * still wish to call this function to avoid duplication of error checking
+ * code.
+ *
+ * RETURNS:
+ * Zero if update appears valid, error code on failure
+ */
+int drm_plane_helper_check_update(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_rect *src,
+ struct drm_rect *dest,
+ const struct drm_rect *clip,
+ int min_scale,
+ int max_scale,
+ bool can_position,
+ bool can_update_disabled,
+ bool *visible)
+{
+ int hscale, vscale;
+
+ if (!crtc->enabled && !can_update_disabled) {
+ DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
+ return -EINVAL;
+ }
+
+ /* Check scaling */
+ hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale);
+ vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale);
+ if (hscale < 0 || vscale < 0) {
+ DRM_DEBUG_KMS("Invalid scaling of plane\n");
+ return -ERANGE;
+ }
+
+ *visible = drm_rect_clip_scaled(src, dest, clip, hscale, vscale);
+ if (!*visible)
+ /*
+ * Plane isn't visible; some drivers can handle this
+ * so we just return success here. Drivers that can't
+ * (including those that use the primary plane helper's
+ * update function) will return an error from their
+ * update_plane handler.
+ */
+ return 0;
+
+ if (!can_position && !drm_rect_equals(dest, clip)) {
+ DRM_DEBUG_KMS("Plane must cover entire CRTC\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_plane_helper_check_update);
+
+/**
* drm_primary_helper_update() - Helper for primary plane update
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
@@ -113,51 +186,42 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
.x = src_x >> 16,
.y = src_y >> 16,
};
+ struct drm_rect src = {
+ .x1 = src_x,
+ .y1 = src_y,
+ .x2 = src_x + src_w,
+ .y2 = src_y + src_h,
+ };
struct drm_rect dest = {
.x1 = crtc_x,
.y1 = crtc_y,
.x2 = crtc_x + crtc_w,
.y2 = crtc_y + crtc_h,
};
- struct drm_rect clip = {
+ const struct drm_rect clip = {
.x2 = crtc->mode.hdisplay,
.y2 = crtc->mode.vdisplay,
};
struct drm_connector **connector_list;
int num_connectors, ret;
+ bool visible;
- if (!crtc->enabled) {
- DRM_DEBUG_KMS("Cannot update primary plane of a disabled CRTC.\n");
- return -EINVAL;
- }
-
- /* Disallow subpixel positioning */
- if ((src_x | src_y | src_w | src_h) & SUBPIXEL_MASK) {
- DRM_DEBUG_KMS("Primary plane does not support subpixel positioning\n");
- return -EINVAL;
- }
-
- /* Disallow scaling */
- src_w >>= 16;
- src_h >>= 16;
- if (crtc_w != src_w || crtc_h != src_h) {
- DRM_DEBUG_KMS("Can't scale primary plane\n");
- return -EINVAL;
- }
-
- /* Make sure primary plane covers entire CRTC */
- drm_rect_intersect(&dest, &clip);
- if (dest.x1 != 0 || dest.y1 != 0 ||
- dest.x2 != crtc->mode.hdisplay || dest.y2 != crtc->mode.vdisplay) {
- DRM_DEBUG_KMS("Primary plane must cover entire CRTC\n");
- return -EINVAL;
- }
-
- /* Framebuffer must be big enough to cover entire plane */
- ret = drm_crtc_check_viewport(crtc, crtc_x, crtc_y, &crtc->mode, fb);
+ ret = drm_plane_helper_check_update(plane, crtc, fb,
+ &src, &dest, &clip,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false, &visible);
if (ret)
return ret;
+ if (!visible)
+ /*
+ * Primary plane isn't visible. Note that unless a driver
+ * provides their own disable function, this will just
+ * wind up returning -EINVAL to userspace.
+ */
+ return plane->funcs->disable_plane(plane);
+
/* Find current connectors for CRTC */
num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
BUG_ON(num_connectors == 0);
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 09824be..a83a646 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -24,6 +24,17 @@
#ifndef DRM_PLANE_HELPER_H
#define DRM_PLANE_HELPER_H
+#include <drm/drm_rect.h>
+
+/*
+ * Drivers that don't allow primary plane scaling may pass this macro in place
+ * of the min/max scale parameters of the update checker function.
+ *
+ * Due to src being in 16.16 fixed point and dest being in integer pixels,
+ * 1<<16 represents no scaling.
+ */
+#define DRM_PLANE_HELPER_NO_SCALING (1<<16)
+
/**
* DOC: plane helpers
*
@@ -31,6 +42,17 @@
* planes.
*/
+extern int drm_plane_helper_check_update(struct drm_plane *plane,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_rect *src,
+ struct drm_rect *dest,
+ const struct drm_rect *clip,
+ int min_scale,
+ int max_scale,
+ bool can_position,
+ bool can_update_disabled,
+ bool *visible);
extern int drm_primary_helper_update(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
--
1.8.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 3+ messages in thread