[rfc] suggested offset properties + qxl support

[rfc] suggested offset properties + qxl support

[Dave Airlie]

There was some discussion on spice irc channel somewhere last week
about how best to take note of the x/y offsets that were suggested
by the hosts into the guests, so that the guest can configured
the monitors in the same layout as they are on the host side.

I think initially the kernel needs to just propogate the values
to userspace, so I've created two properties. The X server
and desktop environments should start to use these properties
to set things correctly.

Dave.

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel

[PATCH 1/2] drm: add properties for suggested x/y offset for connectors.

[Dave Airlie]

From: Dave Airlie <airlied@redhat.com>

Virtual GPUs would like to give the guest some indication where on the screen
the outputs are layed out. So far we only provide modes, these
properties could be exposed to userspace so the desktop environment
could use them as hints to set the correct offsets.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 Documentation/DocBook/drm.tmpl | 17 ++++++++++++++++-
 drivers/gpu/drm/drm_crtc.c     | 24 ++++++++++++++++++++++++
 include/drm/drm_crtc.h         |  5 +++++
 3 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index be35bc3..a434040 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -2507,7 +2507,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >DRM</td>
+	<td rowspan="23" valign="top" >DRM</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >“EDID”</td>
 	<td valign="top" >BLOB | IMMUTABLE</td>
@@ -2638,6 +2638,21 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td rowspan="2" valign="top" >Virtual GPU</td>
+	<td valign="top" >“suggested X”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffffff</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >property to suggest an X offset for a connector</td>
+	</tr>
+	<tr>
+	<td valign="top" >“suggested Y”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=0xffffffff</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >property to suggest an Y offset for a connector</td>
+	</tr>
+	<tr>
 	<td rowspan="3" valign="top" >Optional</td>
 	<td valign="top" >“scaling mode”</td>
 	<td valign="top" >ENUM</td>
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index e79c8d3..15679a7 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1535,6 +1535,30 @@ int drm_mode_create_dirty_info_property(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
 
+/**
+ * drm_mode_create_suggested_offset_properties - create suggests offset properties
+ * @dev: DRM device
+ *
+ * Create the the suggested x/y offset property for connectors.
+ */
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
+{
+	if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
+		return 0;
+
+	dev->mode_config.suggested_x_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested_x", 0, 0xffffffff);
+
+	dev->mode_config.suggested_y_property =
+		drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested_y", 0, 0xffffffff);
+
+	if (dev->mode_config.suggested_x_property == NULL ||
+	    dev->mode_config.suggested_y_property == NULL)
+		return -ENOMEM;
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
+
 static int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group)
 {
 	uint32_t total_objects = 0;
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c40070a..01da16a 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -851,6 +851,10 @@ struct drm_mode_config {
 	struct drm_property *aspect_ratio_property;
 	struct drm_property *dirty_info_property;
 
+	/* properties for virtual machine layout */
+	struct drm_property *suggested_x_property;
+	struct drm_property *suggested_y_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
@@ -1046,6 +1050,7 @@ extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats
 extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
+extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
 
 extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
 					     struct drm_encoder *encoder);
-- 
1.9.3

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel

[PATCH 2/2] drm/qxl: use suggested x/y offset properties to pass guest prefs

[Dave Airlie]

From: Dave Airlie <airlied@redhat.com>

This passes the guest preferences for a where to place the
outputs through to userspace. Userspace would need to be updated
to take note of this information, X server and GNOME.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/qxl/qxl_display.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c
index 0d13962..2b90b53 100644
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -100,14 +100,37 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
 	return 0;
 }
 
+static void qxl_update_offset_props(struct qxl_device *qdev)
+{
+	struct drm_device *dev = qdev->ddev;
+	struct drm_connector *connector;
+	struct qxl_output *output;
+	struct qxl_head *head;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		output = drm_connector_to_qxl_output(connector);
+
+		head = &qdev->client_monitors_config->heads[output->index];
+
+		drm_object_property_set_value(&connector->base,
+			dev->mode_config.suggested_x_property, head->x);
+		drm_object_property_set_value(&connector->base,
+			dev->mode_config.suggested_y_property, head->y);
+	}
+}
+
 void qxl_display_read_client_monitors_config(struct qxl_device *qdev)
 {
 
+	struct drm_device *dev = qdev->ddev;
 	while (qxl_display_copy_rom_client_monitors_config(qdev)) {
 		qxl_io_log(qdev, "failed crc check for client_monitors_config,"
 				 " retrying\n");
 	}
 
+	drm_modeset_lock_all(dev);
+	qxl_update_offset_props(qdev);
+	drm_modeset_unlock_all(dev);
 	if (!drm_helper_hpd_irq_event(qdev->ddev)) {
 		/* notify that the monitor configuration changed, to
 		   adjust at the arbitrary resolution */
@@ -951,6 +974,10 @@ static int qdev_output_init(struct drm_device *dev, int num_output)
 
 	drm_object_attach_property(&connector->base,
 				   qdev->hotplug_mode_update_property, 0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.suggested_x_property, 0);
+	drm_object_attach_property(&connector->base,
+				   dev->mode_config.suggested_y_property, 0);
 	drm_connector_register(connector);
 	return 0;
 }
@@ -1064,6 +1091,7 @@ int qxl_modeset_init(struct qxl_device *qdev)
 
 	qdev->ddev->mode_config.fb_base = qdev->vram_base;
 
+	drm_mode_create_suggested_offset_properties(qdev->ddev);
 	qxl_mode_create_hotplug_mode_update_property(qdev);
 
 	for (i = 0 ; i < qxl_num_crtc; ++i) {
-- 
1.9.3

_______________________________________________
Spice-devel mailing list
Spice-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/spice-devel