[RFC v1 16/20] drm/hdcp2.2: HDCP2.2 Initialization

[Ramalingam C <ramalingam.c@intel.com>]

drm_hdcp_init is extended to support HDCP spec Ver2.2.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
---
 drivers/gpu/drm/drm_hdcp.c | 37 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_hdcp.h     |  6 ++++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/gpu/drm/drm_hdcp.c b/drivers/gpu/drm/drm_hdcp.c
index 9785ab6..5441b55 100644
--- a/drivers/gpu/drm/drm_hdcp.c
+++ b/drivers/gpu/drm/drm_hdcp.c
@@ -198,6 +198,36 @@ void drm_hdcp_connector_state_change_handler(struct drm_connector *connector)
 }
 EXPORT_SYMBOL(drm_hdcp_connector_state_change_handler);
 
+static inline int drm_hdcp2_init(struct drm_connector *connector,
+				struct drm_hdcp *hdcp,
+				uint8_t spec_supported)
+{
+	if (!hdcp->hdcp2_funcs) {
+		DRM_ERROR("Callback functions are missing\n");
+		return -EINVAL;
+	}
+
+	/* No of streams transmitted on the port */
+	/*
+	 * TODO: For DP, in case of MST we need to figure out a way to
+	 * configure this value on the run. on HDMI it is always 1.
+	 */
+	hdcp->k = 1;
+
+	hdcp->streams = kmalloc_array(hdcp->k,
+				sizeof(struct wired_streamid_type), GFP_KERNEL);
+	if (!hdcp->streams)
+		return -ENOMEM;
+
+	/* For HDMI this is forced to be 0x0 */
+	hdcp->streams[0].stream_id = 0;
+
+	/* Setting it to Type 0 by default */
+	hdcp->streams[0].stream_type = HDCP_STREAM_TYPE0_CODE;
+
+	return 0;
+}
+
 /**
  * @drm_hdcp_init:
  *	Initialization of the HDCP stack of the DRM
@@ -209,6 +239,7 @@ int drm_hdcp_init(struct drm_connector *connector,
 				uint8_t spec_supported)
 {
 	struct drm_mode_config *config = &connector->dev->mode_config;
+	int ret;
 
 	if (!hdcp)
 		return -EINVAL;
@@ -227,6 +258,12 @@ int drm_hdcp_init(struct drm_connector *connector,
 	if (!hdcp->hdcp_funcs->link_write || !hdcp->hdcp_funcs->link_read)
 		return -EINVAL;
 
+	if (spec_supported & HDCP_2_2_SUPPORT) {
+		ret = drm_hdcp2_init(connector, hdcp, spec_supported);
+		if (ret < 0)
+			return ret;
+	}
+
 	hdcp->ver_support_on_plat = spec_supported;
 
 	connector->hdcp = hdcp;
diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
index 94acd8d..47862a7 100644
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -320,6 +320,12 @@ struct drm_hdcp_funcs {
 struct drm_hdcp {
 	struct drm_connector *connector;
 
+	/* No of streams transmitted on the port. 1 incase of HDMI & DP SST */
+	uint16_t k;
+
+	/* k no of structures of wired_streamid_type */
+	struct wired_streamid_type *streams;
+
 	/* HDCP Specifications support flag */
 	uint32_t ver_support_on_plat;
 	uint32_t ver_support_on_panel;
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel