From: Ramalingam C <ramalingam.c@intel.com>
To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
daniel.vetter@intel.com
Cc: Ramalingam C <ramalingam.c@intel.com>, uma.shankar@intel.com
Subject: [RFC v1 17/20] drm/hdcp2.2: Definitions of HDMI HDCP2.2 registers
Date: Wed, 12 Jul 2017 13:59:01 +0530 [thread overview]
Message-ID: <1499848144-8456-18-git-send-email-ramalingam.c@intel.com> (raw)
In-Reply-To: <1499848144-8456-1-git-send-email-ramalingam.c@intel.com>
HDCP2.2 registers offsets on HDMI are defined along with it constants.
And also timeout macros for HDCP2.2 adaptation for HDMI is defined.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
---
include/drm/drm_hdcp.h | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
index 47862a7..dac9831 100644
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -43,6 +43,42 @@ struct wired_rep_send_ack;
struct wired_rep_stream_ready;
/**
+ * Definitions for HDCP2.2 adaptation for HDMI
+ */
+
+#define DRM_HDCP_2_2_DDC_ADDR (0x74>>1)
+
+/* HDCP2.2 TIMEOUTs in mSec */
+#define HDCP_2_2_CERT_TIMEOUT 100
+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT 1000
+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT 200
+#define HDCP_2_2_PAIRING_TIMEOUT 200
+#define HDCP_2_2_HDMI_LPRIME_TIMEOUT 20
+#define HDCP_2_2_RECVID_LIST_TIMEOUT 3000
+#define HDCP_2_2_STREAM_READY_TIMEOUT 100
+
+/* HDCP2.2 Register Offsets */
+#define HDMI_HDCP2_REG_VER_OFFSET 0x50
+#define HDMI_HDCP2_REG_WR_MSG_OFFSET 0x60
+#define HDMI_HDCP2_REG_RXSTATUS_OFFSET 0x70
+#define HDMI_HDCP2_REG_RD_MSG_OFFSET 0x80
+#define HDMI_HDCP2_REG_DBG_OFFSET 0xC0
+
+#define HDMI_HDCP_2_2_SUPPORT_MASK (1<<2)
+
+union rx_status_hdmi {
+ struct {
+ uint8_t msg_sz_hi:2;
+ uint8_t ready:1;
+ uint8_t reauth_req:1;
+ uint8_t reserved:4;
+ uint8_t msg_sz_lo;
+ } fields;
+ uint16_t val;
+} __packed;
+
+
+/**
* HDCP Software stack specific
*/
/* Bit mask for HDCP spec ver support */
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-07-12 8:29 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 8:28 [RFC v1 00/20] DRM Interfaces for HDCP support Ramalingam C
2017-07-12 8:28 ` [RFC v1 01/20] drm/hdcp: HDCP bitmask property for connectors Ramalingam C
2017-07-12 9:54 ` Daniel Vetter
2017-07-12 14:56 ` [Intel-gfx] " Ramalingam C
2017-07-12 19:10 ` Sean Paul
2017-07-13 6:09 ` Daniel Vetter
2017-07-13 6:54 ` Ramalingam C
2017-07-13 8:45 ` Daniel Vetter
2017-07-13 10:15 ` [Intel-gfx] " Ramalingam C
2017-07-13 10:36 ` Daniel Vetter
2017-07-13 12:59 ` Ramalingam C
2017-07-13 19:02 ` [Intel-gfx] " Daniel Vetter
2017-07-14 10:40 ` Ramalingam C
2017-07-14 11:21 ` [RFC v2] drm/hdcp: drm enum property for HDCP State Ramalingam C
2017-07-14 13:55 ` Sean Paul
2017-07-21 13:02 ` Ramalingam C
2017-07-24 13:23 ` Sean Paul
2017-07-24 13:34 ` Ramalingam C
2017-07-24 18:12 ` [RFC v3] drm/hdcp: drm enum property for CP State Ramalingam C
2017-07-25 12:34 ` Sean Paul
2017-07-26 9:54 ` Ramalingam C
2017-07-26 14:52 ` Sean Paul
2017-07-26 16:51 ` C, Ramalingam
2017-07-26 17:54 ` Sean Paul
2017-08-02 15:32 ` Ramalingam C
2017-08-02 15:53 ` [RFC v4] " Ramalingam C
2017-08-05 15:51 ` Ramalingam C
2017-08-07 5:32 ` Ramalingam C
2017-07-13 6:36 ` [Intel-gfx] [RFC v1 01/20] drm/hdcp: HDCP bitmask property for connectors Ramalingam C
2017-07-12 8:28 ` [RFC v1 02/20] drm/hdcp: HDCP SRM blob " Ramalingam C
2017-07-12 8:28 ` [RFC v1 03/20] drm/sysfs: Generate drm uevent with custom string Ramalingam C
2017-07-12 8:28 ` [RFC v1 04/20] drm/hdcp: Struct drm_hdcp for connector's hdcp state Ramalingam C
2017-07-12 8:28 ` [RFC v1 05/20] drm/hdcp: HDCP status code for DRM HDCP stack Ramalingam C
2017-07-12 8:28 ` [RFC v1 06/20] drm/hdcp: display driver callback funcs defined Ramalingam C
2017-07-12 8:28 ` [RFC v1 07/20] drm/hdcp: Initialization of DRM hdcp stack Ramalingam C
2017-07-12 8:28 ` [RFC v1 08/20] drm/hdcp: Add KBuild for DRM HDCP support Ramalingam C
2017-07-12 8:28 ` [RFC v1 09/20] drm/hdcp: Generic enable, disable and late_init Ramalingam C
2017-07-12 8:28 ` [RFC v1 10/20] drm/hdcp: Handler for connector state change Ramalingam C
2017-07-12 8:28 ` [RFC v1 11/20] drm/hdcp: Registering " Ramalingam C
2017-07-12 8:28 ` [RFC v1 12/20] drm/hdcp: Atomic set and get property for hdcp Ramalingam C
2017-07-12 8:28 ` [RFC v1 13/20] drm/hdcp: Updating DRM Property val with HDCP state Ramalingam C
2017-07-12 8:28 ` [RFC v1 14/20] drm/hdcp2.2: HDCP2.2 protocol msg definitions Ramalingam C
2017-07-12 8:28 ` [RFC v1 15/20] drm/hdcp2.2: Display driver service functions Ramalingam C
2017-07-12 8:29 ` [RFC v1 16/20] drm/hdcp2.2: HDCP2.2 Initialization Ramalingam C
2017-07-12 8:29 ` Ramalingam C [this message]
2017-07-12 8:29 ` [RFC v1 18/20] drm/hdcp2.2: Late_init: Capability probing on panel Ramalingam C
2017-07-12 8:29 ` [RFC v1 19/20] drm/hdcp2.2: HDCP2.2 enable as a asynchronous work Ramalingam C
2017-07-12 8:29 ` [RFC v1 20/20] drm/hdcp2.2: HDCP2.2 disable " Ramalingam C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499848144-8456-18-git-send-email-ramalingam.c@intel.com \
--to=ramalingam.c@intel.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox