From: Shashank Sharma <shashank.sharma@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v2 00/14] YCBCR 4:2:0 handling in DRM layer
Date: Thu, 13 Jul 2017 21:03:06 +0530 [thread overview]
Message-ID: <1499960000-9232-1-git-send-email-shashank.sharma@intel.com> (raw)
Following YCBCR 4:4:4 and 4:2:2, YCBCR 4:2:0 is a new output format,
which is currently supported on HDMI 2.0 sources/sinks. Due to lower
chroma sub-sampling rate, YCBCR 4:2:0 can drive the video modes at half
the pixel clock than YCBCR 4:4:4 or RGB 8:8:8 outputs. For example, a CEA
4K@60, RGB 8:8:8 mode needs a clock of appx 594Mhz, but it can be driven at
297Mhz using YCBCR 4:2:0 output.
Of course, the lower rate of chroma subsampling, causes the quality of YCBCR
4:2:0 to be lower than YCBCR 4:4:4 or RGB 8:8:8.
This patch series adds support for YCBCR 4:2:0 output in DRM layer.
- First 2 patches, complete the CEA mode-db in drm driver, by adding
new 4k modes. Current CEA mode-db contains 64 modes only (VIC 1-64),
whereas CEA-861-F defined VICs up to 107, including 4k modes, from VIC
range 93-107. First patch makes sure that inclusion of these modes doesn't
break existing HDMI 1.4 monitors, across various drivers.
- Next 5 patches focus on parsing new YCBCR 4:2:0 EDID blocks, and adding
YCBCR 4:2:0 modes in connector. They also contain a prune function, which
will cleanup the YCBCR 4:2:0 modes from list, if the connector doesn't
declare them supported.
- Next 2 patches add helper functions for identifing YCBCR 4:2:0 modes and
setup the color space in AVI infoframes.
- Next 6 patches add code for I915 layer handling of YCBCR 4:2:0 output.
This patch series was initially published as a complete framework to handle
all YCBCR outputs (4:4:4, 4:2:2, 4:2:0), but based on the code reviews, now
its been published as YCBCR 4:2:0 handling series only.
The previous discussion and reviews can be found here:
V5: https://patchwork.freedesktop.org/series/26815/
V1-V4: https://patchwork.freedesktop.org/series/22683/
Now re-publishing this patch series as YCBCR 4:2:0 handling series here.
V2: Addressed review comments from Ville
This series dropped one patch in V2(patch 8 from V1), so 14 patches in V2
This series has been tested with drm-tip code with following setup:
Source: Intel Geminilake device.
Sink: ACER S277HK HDMI 2.0 monitor.
Protocol testing: Astro VA-1844A HDMI analyzer.
Shashank Sharma (14):
drm: handle HDMI 2.0 VICs in AVI info-frames
drm/edid: complete CEA modedb(VIC 1-107)
drm/edid: parse sink information before CEA blocks
drm/edid: cleanup patch for CEA extended-tag macro
drm: add helper to validate YCBCR420 modes
drm/edid: parse YCBCR420 videomodes from EDID
drm/edid: parse ycbcr 420 deep color information
drm: add helper functions for YCBCR420 handling
drm/i915: add config function for YCBCR420 outputs
drm/i915: prepare scaler for YCBCR420 modeset
drm/i915: prepare pipe for YCBCR420 output
drm/i915: prepare csc unit for YCBCR420 output
drm/i915: set colorspace for YCBCR420 outputs
drm/i915/glk: set HDMI 2.0 identifier
drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 2 +-
drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 2 +-
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 2 +-
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 2 +-
drivers/gpu/drm/bridge/analogix-anx78xx.c | 3 +-
drivers/gpu/drm/bridge/sii902x.c | 2 +-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
drivers/gpu/drm/drm_edid.c | 438 +++++++++++++++++++++++++++++-
drivers/gpu/drm/drm_modes.c | 87 ++++++
drivers/gpu/drm/drm_probe_helper.c | 4 +
drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +-
drivers/gpu/drm/i2c/tda998x_drv.c | 2 +-
drivers/gpu/drm/i915/i915_reg.h | 3 +
drivers/gpu/drm/i915/intel_color.c | 46 +++-
drivers/gpu/drm/i915/intel_display.c | 26 ++
drivers/gpu/drm/i915/intel_drv.h | 7 +-
drivers/gpu/drm/i915/intel_hdmi.c | 69 ++++-
drivers/gpu/drm/i915/intel_panel.c | 3 +-
drivers/gpu/drm/i915/intel_sdvo.c | 3 +-
drivers/gpu/drm/mediatek/mtk_hdmi.c | 2 +-
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 2 +-
drivers/gpu/drm/nouveau/nv50_display.c | 3 +-
drivers/gpu/drm/omapdrm/omap_encoder.c | 3 +-
drivers/gpu/drm/radeon/radeon_audio.c | 2 +-
drivers/gpu/drm/rockchip/inno_hdmi.c | 2 +-
drivers/gpu/drm/sti/sti_hdmi.c | 2 +-
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 +-
drivers/gpu/drm/tegra/hdmi.c | 2 +-
drivers/gpu/drm/tegra/sor.c | 2 +-
drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
drivers/gpu/drm/zte/zx_hdmi.c | 2 +-
include/drm/drm_connector.h | 32 +++
include/drm/drm_edid.h | 11 +-
include/drm/drm_modes.h | 11 +
34 files changed, 746 insertions(+), 39 deletions(-)
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2017-07-13 15:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-13 15:33 Shashank Sharma [this message]
2017-07-13 15:33 ` [PATCH v2 01/14] drm: handle HDMI 2.0 VICs in AVI info-frames Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 02/14] drm/edid: complete CEA modedb(VIC 1-107) Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 03/14] drm/edid: parse sink information before CEA blocks Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 04/14] drm/edid: cleanup patch for CEA extended-tag macro Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 05/14] drm: add helper to validate YCBCR420 modes Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 06/14] drm/edid: parse YCBCR420 videomodes from EDID Shashank Sharma
2017-07-13 16:21 ` Ville Syrjälä
2017-07-14 4:04 ` Sharma, Shashank
2017-07-14 10:33 ` [PATCH v8 " Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 07/14] drm/edid: parse ycbcr 420 deep color information Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 08/14] drm: add helper functions for YCBCR420 handling Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 09/14] drm/i915: add config function for YCBCR420 outputs Shashank Sharma
2017-07-14 18:30 ` Ville Syrjälä
2017-07-15 4:40 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 10/14] drm/i915: prepare scaler for YCBCR420 modeset Shashank Sharma
2017-07-14 18:30 ` Ville Syrjälä
2017-07-15 4:41 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 11/14] drm/i915: prepare pipe for YCBCR420 output Shashank Sharma
2017-07-14 18:33 ` Ville Syrjälä
2017-07-15 4:45 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 12/14] drm/i915: prepare csc unit " Shashank Sharma
2017-07-14 18:36 ` Ville Syrjälä
2017-07-15 4:46 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 13/14] drm/i915: set colorspace for YCBCR420 outputs Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 14/14] drm/i915/glk: set HDMI 2.0 identifier Shashank Sharma
2017-07-14 19:02 ` [PATCH v2 00/14] YCBCR 4:2:0 handling in DRM layer Ville Syrjälä
2017-07-15 5:03 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499960000-9232-1-git-send-email-shashank.sharma@intel.com \
--to=shashank.sharma@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox