From: Shashank Sharma <shashank.sharma@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v2 05/14] drm: add helper to validate YCBCR420 modes
Date: Thu, 13 Jul 2017 21:03:11 +0530 [thread overview]
Message-ID: <1499960000-9232-6-git-send-email-shashank.sharma@intel.com> (raw)
In-Reply-To: <1499960000-9232-1-git-send-email-shashank.sharma@intel.com>
YCBCR420 modes are supported only on HDMI 2.0 capable sources.
This patch adds:
- A drm helper to validate YCBCR420-only mode on a particular
connector. This function will help pruning the YCBCR420-only
modes from the connector's modelist.
- A bool variable (ycbcr_420_allowed) in the drm connector structure.
While handling the EDID from HDMI 2.0 sinks, its important to know
if the source is capable of handling YCBCR420 output, so that no
YCBCR 420 modes will be listed for sources which can't handle it.
A driver should set this variable if it wants to see YCBCR420 modes
in the modedb.
V5: Introduced the patch in series.
V6: Squashed two patches (validate YCBCR420 and add YCBCR420
identifier)
V7: Addressed review comments from Vile:
- Move this patch before we add 420 modes from EDID.
- No need for drm_valid_cea_vic() check, function back to non-static.
- Update MODE_STATUS with NO_420 condition.
- Introduce y420_vdb_modes variable in this patch
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
drivers/gpu/drm/drm_edid.c | 1 +
drivers/gpu/drm/drm_modes.c | 29 +++++++++++++++++++++++++++++
drivers/gpu/drm/drm_probe_helper.c | 4 ++++
include/drm/drm_connector.h | 17 +++++++++++++++++
include/drm/drm_modes.h | 5 +++++
5 files changed, 56 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 16f73c5..96eee5a 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2952,6 +2952,7 @@ static bool drm_valid_cea_vic(u8 vic)
{
return vic > 0 && vic < ARRAY_SIZE(edid_cea_modes);
}
+EXPORT_SYMBOL(drm_valid_cea_vic);
/**
* drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index f2493b9..35630b8 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -1083,6 +1083,34 @@ drm_mode_validate_size(const struct drm_display_mode *mode,
}
EXPORT_SYMBOL(drm_mode_validate_size);
+/**
+ * drm_mode_validate_ycbcr420 - add 'ycbcr420-only' modes only when allowed
+ * @mode: mode to check
+ * @connector: drm connector under action
+ *
+ * This function is a helper which can be used to filter out any YCBCR420
+ * only mode, when the source doesn't support it.
+ *
+ * Returns:
+ * The mode status
+ */
+enum drm_mode_status
+drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
+ struct drm_connector *connector)
+{
+ u8 vic = drm_match_cea_mode(mode);
+ enum drm_mode_status status = MODE_OK;
+ struct drm_hdmi_info *hdmi = &connector->display_info.hdmi;
+
+ if (test_bit(vic, hdmi->y420_vdb_modes)) {
+ if (!connector->ycbcr_420_allowed)
+ status = MODE_NO_420;
+ }
+
+ return status;
+}
+EXPORT_SYMBOL(drm_mode_validate_ycbcr420);
+
#define MODE_STATUS(status) [MODE_ ## status + 3] = #status
static const char * const drm_mode_status_names[] = {
@@ -1122,6 +1150,7 @@ static const char * const drm_mode_status_names[] = {
MODE_STATUS(ONE_SIZE),
MODE_STATUS(NO_REDUCED),
MODE_STATUS(NO_STEREO),
+ MODE_STATUS(NO_420),
MODE_STATUS(STALE),
MODE_STATUS(BAD),
MODE_STATUS(ERROR),
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 00e6832..904966c 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -528,6 +528,10 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_pipeline(mode,
connector);
+
+ if (mode->status == MODE_OK)
+ mode->status = drm_mode_validate_ycbcr420(mode,
+ connector);
}
prune:
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ae5b7dc..26dd3eb 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -135,6 +135,14 @@ struct drm_scdc {
struct drm_hdmi_info {
/** @scdc: sink's scdc support and capabilities */
struct drm_scdc scdc;
+
+ /**
+ * @y420_vdb_modes: bitmap of modes which can support ycbcr420
+ * output only (not normal RGB/YCBCR444/422 outputs). There are total
+ * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
+ * upto 128 VICs;
+ */
+ unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
};
/**
@@ -726,6 +734,15 @@ struct drm_connector {
bool interlace_allowed;
bool doublescan_allowed;
bool stereo_allowed;
+
+ /**
+ * @ycbcr_420_allowed : This bool indicates if this connector is
+ * capable of handling YCBCR 420 output. While parsing the EDID
+ * blocks, its very helpful to know, if the source is capable of
+ * handling YCBCR 420 outputs.
+ */
+ bool ycbcr_420_allowed;
+
/**
* @registered: Is this connector exposed (registered) with userspace?
* Protected by @mutex.
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 94ac771..f8a1268 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -80,6 +80,7 @@ struct videomode;
* @MODE_ONE_SIZE: only one resolution is supported
* @MODE_NO_REDUCED: monitor doesn't accept reduced blanking
* @MODE_NO_STEREO: stereo modes not supported
+ * @MODE_NO_420: ycbcr 420 modes not supported
* @MODE_STALE: mode has become stale
* @MODE_BAD: unspecified reason
* @MODE_ERROR: error condition
@@ -124,6 +125,7 @@ enum drm_mode_status {
MODE_ONE_SIZE,
MODE_NO_REDUCED,
MODE_NO_STEREO,
+ MODE_NO_420,
MODE_STALE = -3,
MODE_BAD = -2,
MODE_ERROR = -1
@@ -496,6 +498,9 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode);
enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode,
int maxX, int maxY);
+enum drm_mode_status
+drm_mode_validate_ycbcr420(const struct drm_display_mode *mode,
+ struct drm_connector *connector);
void drm_mode_prune_invalid(struct drm_device *dev,
struct list_head *mode_list, bool verbose);
void drm_mode_sort(struct list_head *mode_list);
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-07-13 15:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-13 15:33 [PATCH v2 00/14] YCBCR 4:2:0 handling in DRM layer Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 01/14] drm: handle HDMI 2.0 VICs in AVI info-frames Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 02/14] drm/edid: complete CEA modedb(VIC 1-107) Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 03/14] drm/edid: parse sink information before CEA blocks Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 04/14] drm/edid: cleanup patch for CEA extended-tag macro Shashank Sharma
2017-07-13 15:33 ` Shashank Sharma [this message]
2017-07-13 15:33 ` [PATCH v2 06/14] drm/edid: parse YCBCR420 videomodes from EDID Shashank Sharma
2017-07-13 16:21 ` Ville Syrjälä
2017-07-14 4:04 ` Sharma, Shashank
2017-07-14 10:33 ` [PATCH v8 " Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 07/14] drm/edid: parse ycbcr 420 deep color information Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 08/14] drm: add helper functions for YCBCR420 handling Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 09/14] drm/i915: add config function for YCBCR420 outputs Shashank Sharma
2017-07-14 18:30 ` Ville Syrjälä
2017-07-15 4:40 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 10/14] drm/i915: prepare scaler for YCBCR420 modeset Shashank Sharma
2017-07-14 18:30 ` Ville Syrjälä
2017-07-15 4:41 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 11/14] drm/i915: prepare pipe for YCBCR420 output Shashank Sharma
2017-07-14 18:33 ` Ville Syrjälä
2017-07-15 4:45 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 12/14] drm/i915: prepare csc unit " Shashank Sharma
2017-07-14 18:36 ` Ville Syrjälä
2017-07-15 4:46 ` Sharma, Shashank
2017-07-13 15:33 ` [PATCH v2 13/14] drm/i915: set colorspace for YCBCR420 outputs Shashank Sharma
2017-07-13 15:33 ` [PATCH v2 14/14] drm/i915/glk: set HDMI 2.0 identifier Shashank Sharma
2017-07-14 19:02 ` [PATCH v2 00/14] YCBCR 4:2:0 handling in DRM layer Ville Syrjälä
2017-07-15 5:03 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499960000-9232-6-git-send-email-shashank.sharma@intel.com \
--to=shashank.sharma@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox