From: Vidya Srinivas <vidya.srinivas@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Subject: [PATCH 2/3] drm/i915/dp: TPS4 PHY test pattern compliance support
Date: Fri, 4 Sep 2020 09:55:03 +0530 [thread overview]
Message-ID: <1599193504-2754-2-git-send-email-vidya.srinivas@intel.com> (raw)
In-Reply-To: <1599193504-2754-1-git-send-email-vidya.srinivas@intel.com>
From: Khaled Almahallawy <khaled.almahallawy@intel.com>
Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source tests.
v2: uniform bit names TP4a/b/c (Manasi)
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 14 ++++++++++++--
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 04231ca5643b..a8a3ffcef5dc 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5403,7 +5403,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
&intel_dp->compliance.test_data.phytest;
struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
enum pipe pipe = crtc->pipe;
- u32 pattern_val;
+ u32 pattern_val, dp_tp_ctl;
switch (data->phy_pattern) {
case DP_PHY_TEST_PATTERN_NONE:
@@ -5443,7 +5443,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
DDI_DP_COMP_CTL_ENABLE |
DDI_DP_COMP_CTL_CUSTOM80);
break;
- case DP_PHY_TEST_PATTERN_CP2520:
+ case DP_PHY_TEST_PATTERN_CP2520_PAT1:
/*
* FIXME: Ideally pattern should come from DPCD 0x24A. As
* current firmware of DPR-100 could not set it, so hardcoding
@@ -5455,6 +5455,16 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
pattern_val);
break;
+ case DP_PHY_TEST_PATTERN_CP2520_PAT3:
+ DRM_DEBUG_KMS("Set TPS4 Phy Test Pattern\n");
+ intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
+ dp_tp_ctl = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
+ dp_tp_ctl &= ~DP_TP_CTL_TRAIN_PAT4_SEL_MASK;
+ dp_tp_ctl |= DP_TP_CTL_TRAIN_PAT4_SEL_TP4a;
+ dp_tp_ctl &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+ dp_tp_ctl |= DP_TP_CTL_LINK_TRAIN_PAT4;
+ intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl);
+ break;
default:
WARN(1, "Invalid Phy Test Pattern\n");
}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ab4b1abd4364..4850890918dc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9974,6 +9974,10 @@ enum skl_power_gate {
#define DP_TP_CTL_MODE_SST (0 << 27)
#define DP_TP_CTL_MODE_MST (1 << 27)
#define DP_TP_CTL_FORCE_ACT (1 << 25)
+#define DP_TP_CTL_TRAIN_PAT4_SEL_MASK (3 << 19)
+#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4a (0 << 19)
+#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4b (1 << 19)
+#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4c (2 << 19)
#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1 << 18)
#define DP_TP_CTL_FDI_AUTOTRAIN (1 << 15)
#define DP_TP_CTL_LINK_TRAIN_MASK (7 << 8)
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-09-04 4:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-23 0:36 [PATCH v2 1/2] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Khaled Almahallawy
2020-07-23 0:36 ` [PATCH v2 2/2] drm/i915/dp: TPS4 PHY test pattern compliance support Khaled Almahallawy
2020-08-18 21:29 ` Navare, Manasi
2020-08-19 1:47 ` Almahallawy, Khaled
2020-09-04 4:25 ` [PATCH 1/3] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Vidya Srinivas
2020-09-04 4:25 ` Vidya Srinivas [this message]
2020-09-04 4:25 ` [PATCH 3/3] [RFC] drm/i915/dp: DP PHY compliance for EHL/JSL Vidya Srinivas
-- strict thread matches above, loose matches on Subject: below --
2020-09-04 4:21 [PATCH 1/3] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Vidya Srinivas
2020-09-04 4:21 ` [PATCH 2/3] drm/i915/dp: TPS4 PHY test pattern compliance support Vidya Srinivas
2020-06-04 5:03 [PATCH] drm/i915/dp: DP PHY compliance for JSL Vidya Srinivas
2020-09-04 4:13 ` [PATCH 1/3] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Vidya Srinivas
2020-09-04 4:13 ` [PATCH 2/3] drm/i915/dp: TPS4 PHY test pattern compliance support Vidya Srinivas
2020-09-04 4:14 ` [PATCH 1/3] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Vidya Srinivas
2020-09-04 4:14 ` [PATCH 2/3] drm/i915/dp: TPS4 PHY test pattern compliance support Vidya Srinivas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1599193504-2754-2-git-send-email-vidya.srinivas@intel.com \
--to=vidya.srinivas@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=khaled.almahallawy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox