dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Navare, Manasi" <manasi.d.navare@intel.com>
To: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: intel-gfx@lists.freedesktop.org, animesh.manna@intel.com,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 2/2] drm/i915/dp: TPS4 PHY test pattern compliance support
Date: Tue, 18 Aug 2020 14:29:14 -0700	[thread overview]
Message-ID: <20200818212908.GA4908@labuser-Z97X-UD5H> (raw)
In-Reply-To: <20200723003627.31198-2-khaled.almahallawy@intel.com>

On Wed, Jul 22, 2020 at 05:36:27PM -0700, Khaled Almahallawy wrote:
> Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source tests.
> 
> v2: uniform bit names TP4a/b/c (Manasi)
> 
> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>

Looks good to me,

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

Khaled, could you also give a tested by here?

Manasi

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 14 ++++++++++++--
>  drivers/gpu/drm/i915/i915_reg.h         |  4 ++++
>  2 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d6295eb20b63..4b74b2ec5665 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5371,7 +5371,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
>  			&intel_dp->compliance.test_data.phytest;
>  	struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
>  	enum pipe pipe = crtc->pipe;
> -	u32 pattern_val;
> +	u32 pattern_val, dp_tp_ctl;
>  
>  	switch (data->phy_pattern) {
>  	case DP_PHY_TEST_PATTERN_NONE:
> @@ -5411,7 +5411,7 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
>  			       DDI_DP_COMP_CTL_ENABLE |
>  			       DDI_DP_COMP_CTL_CUSTOM80);
>  		break;
> -	case DP_PHY_TEST_PATTERN_CP2520:
> +	case DP_PHY_TEST_PATTERN_CP2520_PAT1:
>  		/*
>  		 * FIXME: Ideally pattern should come from DPCD 0x24A. As
>  		 * current firmware of DPR-100 could not set it, so hardcoding
> @@ -5423,6 +5423,16 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
>  			       DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
>  			       pattern_val);
>  		break;
> +		case DP_PHY_TEST_PATTERN_CP2520_PAT3:
> +			DRM_DEBUG_KMS("Set TPS4 Phy Test Pattern\n");
> +			intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
> +			dp_tp_ctl = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
> +			dp_tp_ctl &= ~DP_TP_CTL_TRAIN_PAT4_SEL_MASK;
> +			dp_tp_ctl |= DP_TP_CTL_TRAIN_PAT4_SEL_TP4a;
> +			dp_tp_ctl &= ~DP_TP_CTL_LINK_TRAIN_MASK;
> +			dp_tp_ctl |= DP_TP_CTL_LINK_TRAIN_PAT4;
> +			intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl);
> +			break;
>  	default:
>  		WARN(1, "Invalid Phy Test Pattern\n");
>  	}
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a0d31f3bf634..c586595b9e76 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9982,6 +9982,10 @@ enum skl_power_gate {
>  #define  DP_TP_CTL_MODE_SST			(0 << 27)
>  #define  DP_TP_CTL_MODE_MST			(1 << 27)
>  #define  DP_TP_CTL_FORCE_ACT			(1 << 25)
> +#define  DP_TP_CTL_TRAIN_PAT4_SEL_MASK		(3 << 19)
> +#define  DP_TP_CTL_TRAIN_PAT4_SEL_TP4a		(0 << 19)
> +#define  DP_TP_CTL_TRAIN_PAT4_SEL_TP4b		(1 << 19)
> +#define  DP_TP_CTL_TRAIN_PAT4_SEL_TP4c		(2 << 19)
>  #define  DP_TP_CTL_ENHANCED_FRAME_ENABLE	(1 << 18)
>  #define  DP_TP_CTL_FDI_AUTOTRAIN		(1 << 15)
>  #define  DP_TP_CTL_LINK_TRAIN_MASK		(7 << 8)
> -- 
> 2.17.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-08-18 21:28 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-23  0:36 [PATCH v2 1/2] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Khaled Almahallawy
2020-07-23  0:36 ` [PATCH v2 2/2] drm/i915/dp: TPS4 PHY test pattern compliance support Khaled Almahallawy
2020-08-18 21:29   ` Navare, Manasi [this message]
2020-08-19  1:47     ` Almahallawy, Khaled
2020-09-04  4:25 ` [PATCH 1/3] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Vidya Srinivas
2020-09-04  4:25   ` [PATCH 2/3] drm/i915/dp: TPS4 PHY test pattern compliance support Vidya Srinivas
2020-09-04  4:25   ` [PATCH 3/3] [RFC] drm/i915/dp: DP PHY compliance for EHL/JSL Vidya Srinivas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200818212908.GA4908@labuser-Z97X-UD5H \
    --to=manasi.d.navare@intel.com \
    --cc=animesh.manna@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=khaled.almahallawy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox