Re: [PATCH 0/3] Add dt support for exynos hdmiphy settings

[Tomasz Figa <t.figa@samsung.com>]

Hi Shirish,

On Tuesday 13 of August 2013 12:39:27 Shirish S wrote:
> For various revision of chipset if the signal pattern is changed for
> every board, then the phy setting need to be updated correspondingly by
> measuring the signal.
> With the hdmiphy settings fixed in the driver the only way currently is
> to either add a new structure or add compile time option.
> To avoid this, we can move the same to dt, wherin we can have different
> dt files for every revision. This patchset can be considered as an
> initiative towards achieving the same for exynos 5250 and can be later
> extended to future chipsets.
> Also this patchset moves the entire structure to dt file as-is in the
> driver and hence we can find all the hex values, which are not logically
> explained similar to driver.
> 
> Shirish S (3):
>   ARM: dts: smdk5250: Add hdmi phy settings
>   ARM: dts: arndale:  Add hdmi phy settings
>   drm: exynos: hdmi: Add dt support for hdmiphy settings
> 
>  .../devicetree/bindings/video/exynos_hdmi.txt      |   18 +-
>  arch/arm/boot/dts/exynos5250-arndale.dts           |  120 ++++++++++++
>  arch/arm/boot/dts/exynos5250-smdk5250.dts          |  120 ++++++++++++
>  drivers/gpu/drm/exynos/exynos_hdmi.c               |  191
> +++++++------------- 4 files changed, 320 insertions(+), 129
> deletions(-)

Since this series is related to Exynos platform files, please also Cc the 
linux-samsung-soc mailing list and Kukjin Kim.

Same goes for device tree bindings. If you change anything related to 
device tree, you need to post your patches to devicetree@vger.kernel.org 
mailing list. Ccing device tree maintainers is also a good practice.

Please resend this series with above two issues addressed.

Best regards,
Tomasz