Re: [REGRESSION]: hibernate/sleep regression w/ bisection

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Tejun Heo]

(cc'ing David Airlie and dri-devel)

Hello, the original thread can be read from

  http://thread.gmane.org/gmane.linux.kernel/1209587

Full sysrq-t output at

  http://article.gmane.org/gmane.linux.kernel/1211256

So, the problem is that after a seemingly unreated update to input
serio driver (convert to use workqueue), X seems to lock up
sporadically across suspend/resume cycles.

I went through the full sysrq-t output but couldn't spot anything
suspicious w/ anything else.  No worker is stuck and nobody is waiting
for flush to finish.

Stack trace for X follows.

> X               S f499b944  5800  1652   1651 0x00400080
>  f499b9a8 00003086 00000000 f499b944 c100d4a4 00000000 00000000 f499b958
>  00000000 f499b9a8 f5173140 d7857c56 00000057 f5173140 d8b69880 00000057
>  00000001 00000000 f499b9b4 c104dd89 000f4240 00000000 00000000 f499ba68
> Call Trace:
>  [<c1291301>] ttm_bo_wait_unreserved+0x5f/0x106
>  [<c129145f>] ttm_bo_reserve_locked+0xb7/0xe1
>  [<c1292c27>] ttm_bo_reserve+0x26/0x95
>  [<c12c3c97>] radeon_crtc_do_set_base+0xbd/0x6d2
>  [<c12c42e7>] radeon_crtc_set_base+0x1b/0x1d
>  [<c12c430d>] radeon_crtc_mode_set+0x24/0xdd7
>  [<c1279c57>] drm_crtc_helper_set_mode+0x32c/0x48b
>  [<c1279e2f>] drm_helper_resume_force_mode+0x79/0x23e
>  [<c12ace10>] radeon_gpu_reset+0x84/0x98
>  [<c12c0838>] radeon_fence_wait+0x2d1/0x311
>  [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
>  [<c12908be>] ttm_bo_wait+0xa1/0x108
>  [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
>  [<c127e62e>] drm_ioctl+0x1c2/0x42c
>  [<c10e288e>] do_vfs_ioctl+0x79/0x54b
>  [<c10e2dcb>] sys_ioctl+0x6b/0x70
>  [<c1593813>] sysenter_do_call+0x12/0x22

Do you guys have any ideas what's going on?  It seems to be waiting
for bo->reserved to go zero.  Is it possible that someone there is
forgetting to properly kick a work item after resume causing the wait
to stall?

Andrew, can you please kill the X server after the hang and see
whether that brings the system back?  I think sshd should still work
and if not you can write a script to kill the X server after 30secs
after resume (and kill that script if resume succeeds).

Thank you.

-- 
tejun

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Jerome Glisse]

On Fri, Nov 04, 2011 at 09:14:31AM -0700, Tejun Heo wrote:
> (cc'ing David Airlie and dri-devel)
> 
> Hello, the original thread can be read from
> 
>   http://thread.gmane.org/gmane.linux.kernel/1209587
> 
> Full sysrq-t output at
> 
>   http://article.gmane.org/gmane.linux.kernel/1211256
> 
> So, the problem is that after a seemingly unreated update to input
> serio driver (convert to use workqueue), X seems to lock up
> sporadically across suspend/resume cycles.
> 
> I went through the full sysrq-t output but couldn't spot anything
> suspicious w/ anything else.  No worker is stuck and nobody is waiting
> for flush to finish.
> 
> Stack trace for X follows.
> 
> > X               S f499b944  5800  1652   1651 0x00400080
> >  f499b9a8 00003086 00000000 f499b944 c100d4a4 00000000 00000000 f499b958
> >  00000000 f499b9a8 f5173140 d7857c56 00000057 f5173140 d8b69880 00000057
> >  00000001 00000000 f499b9b4 c104dd89 000f4240 00000000 00000000 f499ba68
> > Call Trace:
> >  [<c1291301>] ttm_bo_wait_unreserved+0x5f/0x106
> >  [<c129145f>] ttm_bo_reserve_locked+0xb7/0xe1
> >  [<c1292c27>] ttm_bo_reserve+0x26/0x95
> >  [<c12c3c97>] radeon_crtc_do_set_base+0xbd/0x6d2
> >  [<c12c42e7>] radeon_crtc_set_base+0x1b/0x1d
> >  [<c12c430d>] radeon_crtc_mode_set+0x24/0xdd7
> >  [<c1279c57>] drm_crtc_helper_set_mode+0x32c/0x48b
> >  [<c1279e2f>] drm_helper_resume_force_mode+0x79/0x23e
> >  [<c12ace10>] radeon_gpu_reset+0x84/0x98
> >  [<c12c0838>] radeon_fence_wait+0x2d1/0x311
> >  [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
> >  [<c12908be>] ttm_bo_wait+0xa1/0x108
> >  [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
> >  [<c127e62e>] drm_ioctl+0x1c2/0x42c
> >  [<c10e288e>] do_vfs_ioctl+0x79/0x54b
> >  [<c10e2dcb>] sys_ioctl+0x6b/0x70
> >  [<c1593813>] sysenter_do_call+0x12/0x22
> 
> Do you guys have any ideas what's going on?  It seems to be waiting
> for bo->reserved to go zero.  Is it possible that someone there is
> forgetting to properly kick a work item after resume causing the wait
> to stall?
> 
> Andrew, can you please kill the X server after the hang and see
> whether that brings the system back?  I think sshd should still work
> and if not you can write a script to kill the X server after 30secs
> after resume (and kill that script if resume succeeds).
> 
> Thank you.
> 

Ok so issue is funny, it should happen without the serio change, i guess
this other change make it just more likely. So here is my theory
radeon_gem_wait_idle_ioctl is call on the scanout buffer it reserve this
buffer. It wait for it to go idle, for some reasone the GPU is either
lockup or not yet fully resume or in some other state (see below for
more suposition).

At that point the gpu reset is call, which reset the gpu and then
restore it, to restore it need to reserve the scanout buffer and
bang you stuck. As the scanout buffer is already reserve by the
wait ioctl.

Thing is i don't know what would be a good solution to this, we could
set some flag to say that we are in reset phase and test if scanout
buffer are already reserve not try to reserve them again in the
restore after gpu reset path.


The GPU lockup is weird, can we get a dmesg on resume when the lockup
happen ? I am really not sure what happen here.

Cheers,
Jerome

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Andrew Watts]

On Fri, Nov 04, 2011 at 09:14:31AM -0700, Tejun Heo wrote:
> Andrew, can you please kill the X server after the hang and see
> whether that brings the system back?  I think sshd should still work
> and if not you can write a script to kill the X server after 30secs
> after resume (and kill that script if resume succeeds).

Hi Tejun & Jerome.

Tejun: My script killed X after a small wait from a bad resume. I am returned 
to the funcioning calling console. I can then re-start X and all subsystems
seem to working fine.

Jerome: I posted a post-bad-resume dmesg snippet with a GPU lockup warning
and trace here:

   http://article.gmane.org/gmane.linux.kernel/1210057

Did you need to see more?

Thanks.

~ Andy

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Jerome Glisse]

On Fri, Nov 4, 2011 at 1:34 PM, Andrew Watts <akwatts@ymail.com> wrote:
> On Fri, Nov 04, 2011 at 09:14:31AM -0700, Tejun Heo wrote:
>> Andrew, can you please kill the X server after the hang and see
>> whether that brings the system back?  I think sshd should still work
>> and if not you can write a script to kill the X server after 30secs
>> after resume (and kill that script if resume succeeds).
>
> Hi Tejun & Jerome.
>
> Tejun: My script killed X after a small wait from a bad resume. I am returned
> to the funcioning calling console. I can then re-start X and all subsystems
> seem to working fine.
>
> Jerome: I posted a post-bad-resume dmesg snippet with a GPU lockup warning
> and trace here:
>
>   http://article.gmane.org/gmane.linux.kernel/1210057
>
> Did you need to see more?
>
> Thanks.
>
> ~ Andy
>
>

I need full dmesg

Cheers,
Jerome

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Jerome Glisse]

[-- Attachment #1: Type: text/plain, Size: 877 bytes --]

On Fri, Nov 04, 2011 at 12:34:58PM -0500, Andrew Watts wrote:
> On Fri, Nov 04, 2011 at 09:14:31AM -0700, Tejun Heo wrote:
> > Andrew, can you please kill the X server after the hang and see
> > whether that brings the system back?  I think sshd should still work
> > and if not you can write a script to kill the X server after 30secs
> > after resume (and kill that script if resume succeeds).
> 
> Hi Tejun & Jerome.
> 
> Tejun: My script killed X after a small wait from a bad resume. I am returned 
> to the funcioning calling console. I can then re-start X and all subsystems
> seem to working fine.
> 
> Jerome: I posted a post-bad-resume dmesg snippet with a GPU lockup warning
> and trace here:
> 
>    http://article.gmane.org/gmane.linux.kernel/1210057
> 
> Did you need to see more?
> 
> Thanks.
> 
> ~ Andy
> 

Attached patch might hide the issue.

Cheers,
Jerome

[-- Attachment #2: 0001-drm-radeon-kms-make-sure-GPU-is-idle-and-working-at-.patch --]
[-- Type: text/plain, Size: 928 bytes --]

>From a13af3d0bff9e093160da63f22c6b44e436aa570 Mon Sep 17 00:00:00 2001
From: Jerome Glisse <jglisse@redhat.com>
Date: Fri, 4 Nov 2011 13:41:37 -0400
Subject: [PATCH] drm/radeon/kms: make sure GPU is idle and working at end of
 resume

This might hide some GPU lockup issue deadlock on resume.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_device.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index c33bc91..1158e55 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -947,6 +947,7 @@ int radeon_resume_kms(struct drm_device *dev)
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
 	}
+	radeon_fence_wait_last(rdev);
 	return 0;
 }
 
-- 
1.7.6.4

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Andrew Watts]

[-- Attachment #1: Type: text/plain, Size: 242 bytes --]

On Fri, Nov 04, 2011 at 01:44:01PM -0400, Jerome Glisse wrote:
> 
> Attached patch might hide the issue.
> 
> Cheers,
> Jerome

Unfortunately, the patch did not help.

Attached is the full hibernate->resume dmesg requested.

Thanks.

~ Andy


[-- Attachment #2: bad-dmesg.txt.gz --]
[-- Type: application/x-gunzip, Size: 3950 bytes --]

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Andrew Watts]

[-- Attachment #1: Type: text/plain, Size: 213 bytes --]

On Fri, Nov 04, 2011 at 01:35:53PM -0400, Jerome Glisse wrote:
> 
> I need full dmesg
> 
> Cheers,
> Jerome

Hi. Just noticed I attached a gzip of my dmesg last time by mistake.

Here goes as text/plain.

~ Andy


[-- Attachment #2: bad-dmesg.txt --]
[-- Type: text/plain, Size: 14635 bytes --]

[  237.030115] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[  237.030121] PM: Basic memory bitmaps created
[  237.030123] PM: Syncing filesystems ... done.
[  237.046109] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  237.057089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  237.068083] PM: Preallocating image memory... done (allocated 83937 pages)
[  237.154418] PM: Allocated 335748 kbytes in 0.08 seconds (4196.85 MB/s)
[  237.154422] Suspending console(s) (use no_console_suspend to debug)
[  237.154847] hub 4-0:1.0: hub_suspend
[  237.154858] usb usb4: bus suspend
[  237.154863] ohci_hcd 0000:02:07.0: suspend root hub
[  237.154891] hub 3-0:1.0: hub_suspend
[  237.154896] usb usb3: bus suspend
[  237.154900] ohci_hcd 0000:00:13.1: suspend root hub
[  237.154927] hub 2-0:1.0: hub_suspend
[  237.154932] usb usb2: bus suspend
[  237.154936] ohci_hcd 0000:00:13.0: suspend root hub
[  237.154969] hub 1-0:1.0: hub_suspend
[  237.154974] usb usb1: bus suspend
[  237.154978] ehci_hcd 0000:02:07.2: suspend root hub
[  237.156423] hub 5-0:1.0: hub_suspend
[  237.156429] usb usb5: bus suspend
[  237.156433] ohci_hcd 0000:02:07.1: suspend root hub
[  237.209815] i8042 aux 00:06: wake-up capability disabled by ACPI
[  237.213576] i8042 kbd 00:05: wake-up capability enabled by ACPI
[  237.213699] b43-pci-bridge 0000:02:02.0: PCI INT A disabled
[  237.213748] ACPI handle has no context!
[  237.234057] ATI IXP AC97 controller 0000:00:14.5: PCI INT B disabled
[  237.234108] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled
[  237.244424] PM: freeze of devices complete after 89.751 msecs
[  237.244831] PM: late freeze of devices complete after 0.401 msecs
[  237.244951] ACPI: Preparing to enter system sleep state S4
[  237.270225] PM: Saving platform NVS memory
[  237.270273] hibernation debug: Waiting for 5 seconds.
[  242.272850] ACPI: Waking up from system sleep state S4
[  242.275175] ATIIXP_IDE 0000:00:14.1: restoring config space at offset 0x1 (was 0xa000001, writing 0xa000005)
[  242.286031] firewire_ohci 0000:02:00.0: BAR 0: set to [mem 0xd0208000-0xd02087ff] (PCI address [0xd0208000-0xd02087ff])
[  242.286038] firewire_ohci 0000:02:00.0: BAR 1: set to [mem 0xd0200000-0xd0203fff] (PCI address [0xd0200000-0xd0203fff])
[  242.286049] firewire_ohci 0000:02:00.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010a)
[  242.286068] firewire_ohci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008)
[  242.286075] firewire_ohci 0000:02:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100016)
[  242.286105] b43-pci-bridge 0000:02:02.0: restoring config space at offset 0x1 (was 0x2, writing 0x6)
[  242.286617] PM: early restore of devices complete after 11.560 msecs
[  242.319891] ohci_hcd 0000:00:13.0: lost power
[  242.319919] ohci_hcd 0000:00:13.1: lost power
[  242.319946] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  242.319964] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 5 (level, low) -> IRQ 5
[  242.323512] [drm] AGP mode requested: 8
[  242.323517] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[  242.323535] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[  242.323553] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[  242.323603] radeon 0000:01:05.0: GTT: 32M 0xD2000000 - 0xD3FFFFFF
[  242.333997] b43-pci-bridge 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[  242.334041] ohci_hcd 0000:02:07.0: lost power
[  242.334060] ohci_hcd 0000:02:07.1: lost power
[  242.334411] radeon 0000:01:05.0: WB disabled
[  242.334450] [drm] radeon: ring at 0x00000000D2001000
[  242.334469] [drm] ring test succeeded in 0 usecs
[  242.334497] [drm] ib test succeeded in 0 usecs
[  242.446359] ohci_hcd 0000:00:13.0: OHCI controller state
[  242.446364] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[  242.446369] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
[  242.446373] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[  242.446377] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[  242.446382] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[  242.446390] ohci_hcd 0000:00:13.0: hcca frame #0005
[  242.446395] ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[  242.446399] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[  242.446403] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[  242.446408] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[  242.446412] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[  242.446416] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[  242.446419] ohci_hcd 0000:00:13.0: restart complete
[  242.446423] usb usb2: root hub lost power or was reset
[  242.446426] ohci_hcd 0000:00:13.0: suspend root hub
[  242.450451] ohci_hcd 0000:00:13.1: OHCI controller state
[  242.450455] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[  242.450459] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
[  242.450463] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[  242.450467] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[  242.450471] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[  242.450479] ohci_hcd 0000:00:13.1: hcca frame #0005
[  242.450484] ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
[  242.450488] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[  242.450492] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[  242.450496] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[  242.450500] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[  242.450504] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[  242.450507] ohci_hcd 0000:00:13.1: restart complete
[  242.450509] usb usb3: root hub lost power or was reset
[  242.450513] ohci_hcd 0000:00:13.1: suspend root hub
[  242.480589] ohci_hcd 0000:02:07.0: OHCI controller state
[  242.480593] ohci_hcd 0000:02:07.0: OHCI 1.0, NO legacy support registers
[  242.480597] ohci_hcd 0000:02:07.0: control 0x283 RWC HCFS=operational CBSR=3
[  242.480601] ohci_hcd 0000:02:07.0: cmdstatus 0x00000 SOC=0
[  242.480605] ohci_hcd 0000:02:07.0: intrstatus 0x00000004 SF
[  242.480609] ohci_hcd 0000:02:07.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[  242.480616] ohci_hcd 0000:02:07.0: hcca frame #001f
[  242.480620] ohci_hcd 0000:02:07.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3)
[  242.480624] ohci_hcd 0000:02:07.0: roothub.b 00000000 PPCM=0000 DR=0000
[  242.480627] ohci_hcd 0000:02:07.0: roothub.status 00008000 DRWE
[  242.480632] ohci_hcd 0000:02:07.0: roothub.portstatus [0] 0x00000100 PPS
[  242.480636] ohci_hcd 0000:02:07.0: roothub.portstatus [1] 0x00000100 PPS
[  242.480640] ohci_hcd 0000:02:07.0: roothub.portstatus [2] 0x00000100 PPS
[  242.480642] ohci_hcd 0000:02:07.0: restart complete
[  242.480645] usb usb4: root hub lost power or was reset
[  242.480648] ohci_hcd 0000:02:07.0: suspend root hub
[  242.510670] ohci_hcd 0000:02:07.1: OHCI controller state
[  242.510674] ohci_hcd 0000:02:07.1: OHCI 1.0, NO legacy support registers
[  242.510678] ohci_hcd 0000:02:07.1: control 0x283 RWC HCFS=operational CBSR=3
[  242.510682] ohci_hcd 0000:02:07.1: cmdstatus 0x00000 SOC=0
[  242.510686] ohci_hcd 0000:02:07.1: intrstatus 0x00000004 SF
[  242.510689] ohci_hcd 0000:02:07.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[  242.510696] ohci_hcd 0000:02:07.1: hcca frame #001f
[  242.510700] ohci_hcd 0000:02:07.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2)
[  242.510704] ohci_hcd 0000:02:07.1: roothub.b 00000000 PPCM=0000 DR=0000
[  242.510708] ohci_hcd 0000:02:07.1: roothub.status 00008000 DRWE
[  242.510712] ohci_hcd 0000:02:07.1: roothub.portstatus [0] 0x00000100 PPS
[  242.510716] ohci_hcd 0000:02:07.1: roothub.portstatus [1] 0x00000100 PPS
[  242.510718] ohci_hcd 0000:02:07.1: restart complete
[  242.510721] usb usb5: root hub lost power or was reset
[  242.510724] ohci_hcd 0000:02:07.1: suspend root hub
[  242.510778] firewire_core: skipped bus generations, destroying all nodes
[  242.510792] usb usb2: usb resume
[  242.510797] ohci_hcd 0000:00:13.0: resume root hub
[  242.510803] usb usb3: usb resume
[  242.510807] ohci_hcd 0000:00:13.1: resume root hub
[  242.510818] usb usb1: root hub lost power or was reset
[  242.510826] ehci_hcd 0000:02:07.2: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
[  242.510834] ehci_hcd 0000:02:07.2: MWI active
[  242.510840] ehci_hcd 0000:02:07.2: ...powerup ports...
[  242.510856] usb usb4: usb resume
[  242.510860] ohci_hcd 0000:02:07.0: wakeup root hub
[  242.510865] usb usb5: usb resume
[  242.541947] ohci_hcd 0000:02:07.1: resume root hub
[  242.541956] usb usb1: usb resume
[  242.541960] ehci_hcd 0000:02:07.2: resume root hub after power loss
[  242.570028] hub 3-0:1.0: hub_reset_resume
[  242.570032] hub 3-0:1.0: trying to enable port power on non-switchable hub
[  242.570045] hub 2-0:1.0: hub_reset_resume
[  242.570047] hub 2-0:1.0: trying to enable port power on non-switchable hub
[  242.570054] hub 4-0:1.0: hub_reset_resume
[  242.570057] hub 4-0:1.0: trying to enable port power on non-switchable hub
[  242.571026] ehci_hcd 0000:02:07.2: port 2 low speed --> companion
[  242.601023] hub 5-0:1.0: hub_reset_resume
[  242.601026] hub 5-0:1.0: trying to enable port power on non-switchable hub
[  242.662162] ehci_hcd 0000:02:07.2: port 3 full speed --> companion
[  242.662170] ehci_hcd 0000:02:07.2: GetStatus port:3 status 003801 0  ACK POWER OWNER sig=j CONNECT
[  242.662192] ehci_hcd 0000:02:07.2: GetStatus port:2 status 003402 0  ACK POWER OWNER sig=k CSC
[  242.671059] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
[  242.671064] hub 4-0:1.0: port 2: status 0101 change 0001
[  242.673022] hub 1-0:1.0: hub_reset_resume
[  242.673025] hub 1-0:1.0: enabling power on all ports
[  242.702027] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
[  242.702032] hub 5-0:1.0: port 1: status 0301 change 0001
[  242.743895] i8042 kbd 00:05: wake-up capability disabled by ACPI
[  242.746578] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[  242.751037] hda: UDMA/100 mode selected
[  242.774059] usb 4-2: reset-resume
[  242.803444] usb 5-1: reset-resume
[  242.836028] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[  242.887035] usb 4-2: reset full speed USB device number 3 using ohci_hcd
[  242.951026] ohci_hcd 0000:02:07.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
[  243.011046] firewire_core: rediscovered device fw0
[  243.024045] pl2303 4-2:1.0: no reset_resume for driver pl2303?
[  243.024047] pl2303 4-2:1.0: forced unbind
[  243.024165] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[  243.024180] pl2303 4-2:1.0: device disconnected
[  243.230025] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[  243.281032] usb 5-1: reset low speed USB device number 2 using ohci_hcd
[  243.494027] ohci_hcd 0000:02:07.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[  243.574073] PM: restore of devices complete after 1254.411 msecs
[  243.574095] pl2303 4-2:1.0: usb_probe_interface
[  243.574098] pl2303 4-2:1.0: usb_probe_interface - got id
[  243.574104] pl2303 4-2:1.0: pl2303 converter detected
[  243.606085] usb 4-2: pl2303 converter now attached to ttyUSB0
[  243.606236] PM: Image restored successfully.
[  243.606239] Restarting tasks ... done.
[  243.606443] PM: Basic memory bitmaps freed
[  243.606452] video LNXVIDEO:00: Restoring backlight state
[  243.606484] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  243.606489] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[  243.606493] hub 4-0:1.0: state 7 ports 3 chg 0004 evt 0004
[  243.606502] hub 4-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[  243.606507] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000
[  243.606510] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0002
[  243.606515] hub 5-0:1.0: port 1, status 0303, change 0000, 1.5 Mb/s
[  243.626231] radeon 0000:01:05.0: GPU lockup CP stall for more than 82318msec
[  243.626236] ------------[ cut here ]------------
[  243.626252] WARNING: at drivers/gpu/drm/radeon/radeon_fence.c:246 radeon_fence_wait+0x2c3/0x311()
[  243.626256] Hardware name: Pavilion zv5000
[  243.626259] GPU lockup (waiting for 0x00000F8C last fence id 0x00000F8A)
[  243.626262] Modules linked in: fan snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss fuse pl2303 snd_atiixp snd_ac97_codec ac97_bus snd_pcm pcmcia snd_timer snd ohci_hcd shpchp processor yenta_socket pcmcia_rsrc ssb video thermal wmi battery button ac ehci_hcd thermal_sys pcmcia_core firewire_ohci snd_page_alloc
[  243.626311] Pid: 1646, comm: X Tainted: G   M        2.6.39.4 #19
[  243.626314] Call Trace:
[  243.626325]  [<c1033164>] warn_slowpath_common+0x67/0x8e
[  243.626331]  [<c12c082a>] ? radeon_fence_wait+0x2c3/0x311
[  243.626335]  [<c12c082a>] ? radeon_fence_wait+0x2c3/0x311
[  243.626339]  [<c1033207>] warn_slowpath_fmt+0x2e/0x30
[  243.626344]  [<c12c082a>] radeon_fence_wait+0x2c3/0x311
[  243.626352]  [<c104b12a>] ? wake_up_bit+0x62/0x62
[  243.626358]  [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
[  243.626363]  [<c12908be>] ttm_bo_wait+0xa1/0x108
[  243.626371]  [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
[  243.626378]  [<c127e62e>] drm_ioctl+0x1c2/0x42c
[  243.626383]  [<c12d6e05>] ? radeon_gem_set_tiling_ioctl+0x8e/0x8e
[  243.626389]  [<c109ad9a>] ? perf_pmu_enable+0x1a/0x21
[  243.626395]  [<c1026eed>] ? update_curr+0x164/0x24d
[  243.626403]  [<c11f5171>] ? rb_erase+0x16e/0x27a
[  243.626411]  [<c1007ba8>] ? __switch_to_xtra+0xf7/0x11d
[  243.626417]  [<c103015e>] ? set_next_entity+0xad/0xc1
[  243.626422]  [<c127e46c>] ? drm_version+0x8a/0x8a
[  243.626428]  [<c10e288e>] do_vfs_ioctl+0x79/0x54b
[  243.626436]  [<c158c95a>] ? schedule+0x29a/0x614
[  243.626441]  [<c10e2dcb>] sys_ioctl+0x6b/0x70
[  243.626446]  [<c1593813>] sysenter_do_call+0x12/0x22
[  243.626449] ---[ end trace 17a119d9361222c9 ]---
[  243.633615] radeon 0000:01:05.0: GPU reset succeed
[  243.671128] radeon 0000:01:05.0: WB disabled
[  243.671170] [drm] radeon: ring at 0x00000000D2001000
[  243.671189] [drm] ring test succeeded in 0 usecs
[  243.671200] [drm] ib test succeeded in 1 usecs
[  243.704033] ohci_hcd 0000:00:13.1: auto-stop root hub
[  243.704048] ohci_hcd 0000:00:13.0: auto-stop root hub

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Tejun Heo]

On Fri, Nov 04, 2011 at 06:08:20PM -0500, Andrew Watts wrote:
> On Fri, Nov 04, 2011 at 01:35:53PM -0400, Jerome Glisse wrote:
> > 
> > I need full dmesg
> > 
> > Cheers,
> > Jerome
> 
> Hi. Just noticed I attached a gzip of my dmesg last time by mistake.
> 
> Here goes as text/plain.

Out of curiosity, did it get somewhere?

Thanks.

-- 
tejun

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Jerome Glisse]

On Mon, Nov 21, 2011 at 4:09 PM, Tejun Heo <tj@kernel.org> wrote:
> On Fri, Nov 04, 2011 at 06:08:20PM -0500, Andrew Watts wrote:
>> On Fri, Nov 04, 2011 at 01:35:53PM -0400, Jerome Glisse wrote:
>> >
>> > I need full dmesg
>> >
>> > Cheers,
>> > Jerome
>>
>> Hi. Just noticed I attached a gzip of my dmesg last time by mistake.
>>
>> Here goes as text/plain.
>
> Out of curiosity, did it get somewhere?
>
> Thanks.
>
> --
> tejun
>

Yeah i am pretty sure i know what's going wrong but there is no easy
fix, there is a deadlock in the kernel when gem wait ioctl is call on
scanout buffer and that a gpu reset happen

Cheers,
Jerome

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Andrew Watts]

On Mon, Nov 21, 2011 at 04:29:23PM -0500, Jerome Glisse wrote:
> On Mon, Nov 21, 2011 at 4:09 PM, Tejun Heo <tj@kernel.org> wrote:
> >
> > Out of curiosity, did it get somewhere?
> >
> > Thanks.
> >
> > --
> > tejun
> >
> 
> Yeah i am pretty sure i know what's going wrong but there is no easy
> fix, there is a deadlock in the kernel when gem wait ioctl is call on
> scanout buffer and that a gpu reset happen
> 
> Cheers,
> Jerome

Tejun, I was about to send a similar email asking about this; many thanks
for sharing my interest.

Jerome, sounds encouraging that you think you know what the issue is. What
are the next steps? Please let me know how I can assist on my end (code 
validation, etc.).

~ Andy

Re: [REGRESSION]: hibernate/sleep regression w/ bisection

[Andrew Watts]

Hello all.

I wanted to follow-up on a very peculiar yet highly reproducible bug
involving suspend/resume, radeon, and a seemingly unrelated patch to
input serio.

The last comment in the thread was from Jerome Glisse saying it was a tough
bug to fix. Has anyone had any good ideas on how to fix it since?

Thanks!

~ Andy


On Fri, Nov 04, 2011 at 09:14:31AM -0700, Tejun Heo wrote:
> (cc'ing David Airlie and dri-devel)
> 
> Hello, the original thread can be read from
> 
>   http://thread.gmane.org/gmane.linux.kernel/1209587
> 
> Full sysrq-t output at
> 
>   http://article.gmane.org/gmane.linux.kernel/1211256
> 
> So, the problem is that after a seemingly unreated update to input
> serio driver (convert to use workqueue), X seems to lock up
> sporadically across suspend/resume cycles.
> 
> I went through the full sysrq-t output but couldn't spot anything
> suspicious w/ anything else.  No worker is stuck and nobody is waiting
> for flush to finish.
> 
> Stack trace for X follows.
> 
> > X               S f499b944  5800  1652   1651 0x00400080
> >  f499b9a8 00003086 00000000 f499b944 c100d4a4 00000000 00000000 f499b958
> >  00000000 f499b9a8 f5173140 d7857c56 00000057 f5173140 d8b69880 00000057
> >  00000001 00000000 f499b9b4 c104dd89 000f4240 00000000 00000000 f499ba68
> > Call Trace:
> >  [<c1291301>] ttm_bo_wait_unreserved+0x5f/0x106
> >  [<c129145f>] ttm_bo_reserve_locked+0xb7/0xe1
> >  [<c1292c27>] ttm_bo_reserve+0x26/0x95
> >  [<c12c3c97>] radeon_crtc_do_set_base+0xbd/0x6d2
> >  [<c12c42e7>] radeon_crtc_set_base+0x1b/0x1d
> >  [<c12c430d>] radeon_crtc_mode_set+0x24/0xdd7
> >  [<c1279c57>] drm_crtc_helper_set_mode+0x32c/0x48b
> >  [<c1279e2f>] drm_helper_resume_force_mode+0x79/0x23e
> >  [<c12ace10>] radeon_gpu_reset+0x84/0x98
> >  [<c12c0838>] radeon_fence_wait+0x2d1/0x311
> >  [<c12c0e37>] radeon_sync_obj_wait+0xc/0xe
> >  [<c12908be>] ttm_bo_wait+0xa1/0x108
> >  [<c12d6e7b>] radeon_gem_wait_idle_ioctl+0x76/0xc4
> >  [<c127e62e>] drm_ioctl+0x1c2/0x42c
> >  [<c10e288e>] do_vfs_ioctl+0x79/0x54b
> >  [<c10e2dcb>] sys_ioctl+0x6b/0x70
> >  [<c1593813>] sysenter_do_call+0x12/0x22
> 
> Do you guys have any ideas what's going on?  It seems to be waiting
> for bo->reserved to go zero.  Is it possible that someone there is
> forgetting to properly kick a work item after resume causing the wait
> to stall?
> 
> Andrew, can you please kill the X server after the hang and see
> whether that brings the system back?  I think sshd should still work
> and if not you can write a script to kill the X server after 30secs
> after resume (and kill that script if resume succeeds).
> 
> Thank you.
> 
> -- 
> tejun