* Re: [PATCH 2/5] drm: add helper to get crtc timings (v2)
2014-11-18 2:10 ` [PATCH 2/5] drm: add helper to get crtc timings (v2) Matt Roper
@ 2014-11-18 7:56 ` Daniel Vetter
2014-11-18 8:49 ` Jani Nikula
2014-11-18 17:12 ` [PATCH 2/5] drm: add helper to get crtc timings (v3) Matt Roper
2 siblings, 0 replies; 6+ messages in thread
From: Daniel Vetter @ 2014-11-18 7:56 UTC (permalink / raw)
To: Matt Roper; +Cc: intel-gfx, Gustavo Padovan, dri-devel
On Mon, Nov 17, 2014 at 06:10:36PM -0800, Matt Roper wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>
> We need to get hdisplay and vdisplay in a few places so create a
> helper to make our job easier.
>
> v2 (by Matt): Use new stereo doubling function (suggested by Ville)
>
> Cc: dri-devel@lists.freedesktop.org
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 22 ++++++++++++----------
> drivers/gpu/drm/i915/intel_display.c | 6 +++---
> include/drm/drm_crtc.h | 2 ++
> 3 files changed, 17 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 56737e7..64ec23b 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -2493,6 +2493,17 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
> }
> EXPORT_SYMBOL(drm_mode_set_config_internal);
>
Kerneldoc missing.
-Daniel
> +void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay)
> +{
> + struct drm_display_mode adjusted = *mode;
> +
> + drm_mode_stereo_double(&adjusted);
> + *hdisplay = adjusted.crtc_hdisplay;
> + *vdisplay = adjusted.crtc_vdisplay;
> +}
> +EXPORT_SYMBOL(drm_crtc_get_hv_timing);
> +
> /**
> * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
> * CRTC viewport
> @@ -2510,16 +2521,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> {
> int hdisplay, vdisplay;
>
> - hdisplay = mode->hdisplay;
> - vdisplay = mode->vdisplay;
> -
> - if (drm_mode_is_stereo(mode)) {
> - struct drm_display_mode adjusted = *mode;
> -
> - drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
> - hdisplay = adjusted.crtc_hdisplay;
> - vdisplay = adjusted.crtc_vdisplay;
> - }
> + drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
>
> if (crtc->invert_dimensions)
> swap(hdisplay, vdisplay);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 320bf4c..a967623 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10158,9 +10158,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
> * computation to clearly distinguish it from the adjusted mode, which
> * can be changed by the connectors in the below retry loop.
> */
> - drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
> - pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
> - pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
> + drm_crtc_get_hv_timing(&pipe_config->requested_mode,
> + &pipe_config->pipe_src_w,
> + &pipe_config->pipe_src_h);
>
> encoder_retry:
> /* Ensure the port clock defaults are reset when retrying. */
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 7b28ab0..23236f6 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1138,6 +1138,8 @@ extern int drm_plane_init(struct drm_device *dev,
> extern void drm_plane_cleanup(struct drm_plane *plane);
> extern unsigned int drm_plane_index(struct drm_plane *plane);
> extern void drm_plane_force_disable(struct drm_plane *plane);
> +extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay);
> extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> int x, int y,
> const struct drm_display_mode *mode,
> --
> 1.8.5.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH 2/5] drm: add helper to get crtc timings (v2)
2014-11-18 2:10 ` [PATCH 2/5] drm: add helper to get crtc timings (v2) Matt Roper
2014-11-18 7:56 ` Daniel Vetter
@ 2014-11-18 8:49 ` Jani Nikula
2014-11-18 17:12 ` [PATCH 2/5] drm: add helper to get crtc timings (v3) Matt Roper
2 siblings, 0 replies; 6+ messages in thread
From: Jani Nikula @ 2014-11-18 8:49 UTC (permalink / raw)
To: Matt Roper, intel-gfx; +Cc: Gustavo Padovan, dri-devel
On Tue, 18 Nov 2014, Matt Roper <matthew.d.roper@intel.com> wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>
> We need to get hdisplay and vdisplay in a few places so create a
> helper to make our job easier.
>
> v2 (by Matt): Use new stereo doubling function (suggested by Ville)
>
> Cc: dri-devel@lists.freedesktop.org
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 22 ++++++++++++----------
> drivers/gpu/drm/i915/intel_display.c | 6 +++---
> include/drm/drm_crtc.h | 2 ++
> 3 files changed, 17 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 56737e7..64ec23b 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -2493,6 +2493,17 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
> }
> EXPORT_SYMBOL(drm_mode_set_config_internal);
>
> +void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay)
> +{
> + struct drm_display_mode adjusted = *mode;
I'd prefer using drm_mode_copy(). It doesn't matter here and now, but if
it starts to matter in the future the problems will be hard to track.
BR,
Jani.
> +
> + drm_mode_stereo_double(&adjusted);
> + *hdisplay = adjusted.crtc_hdisplay;
> + *vdisplay = adjusted.crtc_vdisplay;
> +}
> +EXPORT_SYMBOL(drm_crtc_get_hv_timing);
> +
> /**
> * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
> * CRTC viewport
> @@ -2510,16 +2521,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> {
> int hdisplay, vdisplay;
>
> - hdisplay = mode->hdisplay;
> - vdisplay = mode->vdisplay;
> -
> - if (drm_mode_is_stereo(mode)) {
> - struct drm_display_mode adjusted = *mode;
> -
> - drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
> - hdisplay = adjusted.crtc_hdisplay;
> - vdisplay = adjusted.crtc_vdisplay;
> - }
> + drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
>
> if (crtc->invert_dimensions)
> swap(hdisplay, vdisplay);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 320bf4c..a967623 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10158,9 +10158,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
> * computation to clearly distinguish it from the adjusted mode, which
> * can be changed by the connectors in the below retry loop.
> */
> - drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
> - pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
> - pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
> + drm_crtc_get_hv_timing(&pipe_config->requested_mode,
> + &pipe_config->pipe_src_w,
> + &pipe_config->pipe_src_h);
>
> encoder_retry:
> /* Ensure the port clock defaults are reset when retrying. */
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 7b28ab0..23236f6 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1138,6 +1138,8 @@ extern int drm_plane_init(struct drm_device *dev,
> extern void drm_plane_cleanup(struct drm_plane *plane);
> extern unsigned int drm_plane_index(struct drm_plane *plane);
> extern void drm_plane_force_disable(struct drm_plane *plane);
> +extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay);
> extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> int x, int y,
> const struct drm_display_mode *mode,
> --
> 1.8.5.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 2/5] drm: add helper to get crtc timings (v3)
2014-11-18 2:10 ` [PATCH 2/5] drm: add helper to get crtc timings (v2) Matt Roper
2014-11-18 7:56 ` Daniel Vetter
2014-11-18 8:49 ` Jani Nikula
@ 2014-11-18 17:12 ` Matt Roper
2014-11-18 20:11 ` Ville Syrjälä
2 siblings, 1 reply; 6+ messages in thread
From: Matt Roper @ 2014-11-18 17:12 UTC (permalink / raw)
To: intel-gfx; +Cc: Gustavo Padovan, dri-devel
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.
v2 (by Matt): Use new stereo doubling function (suggested by Ville)
v3 (by Matt):
- Add missing kerneldoc (Daniel)
- Use drm_mode_copy() (Jani)
Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/drm_crtc.c | 32 ++++++++++++++++++++++----------
drivers/gpu/drm/i915/intel_display.c | 6 +++---
include/drm/drm_crtc.h | 2 ++
3 files changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 56737e7..be1a485 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2494,6 +2494,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
EXPORT_SYMBOL(drm_mode_set_config_internal);
/**
+ * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+ int *hdisplay, int *vdisplay)
+{
+ struct drm_display_mode adjusted;
+
+ drm_mode_copy(&adjusted, mode);
+ drm_mode_stereo_double(&adjusted);
+ *hdisplay = adjusted.crtc_hdisplay;
+ *vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_crtc_get_hv_timing);
+
+/**
* drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
* CRTC viewport
* @crtc: CRTC that framebuffer will be displayed on
@@ -2510,16 +2531,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
{
int hdisplay, vdisplay;
- hdisplay = mode->hdisplay;
- vdisplay = mode->vdisplay;
-
- if (drm_mode_is_stereo(mode)) {
- struct drm_display_mode adjusted = *mode;
-
- drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
- hdisplay = adjusted.crtc_hdisplay;
- vdisplay = adjusted.crtc_vdisplay;
- }
+ drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->invert_dimensions)
swap(hdisplay, vdisplay);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 320bf4c..a967623 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10158,9 +10158,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
* computation to clearly distinguish it from the adjusted mode, which
* can be changed by the connectors in the below retry loop.
*/
- drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
- pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
- pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
+ drm_crtc_get_hv_timing(&pipe_config->requested_mode,
+ &pipe_config->pipe_src_w,
+ &pipe_config->pipe_src_h);
encoder_retry:
/* Ensure the port clock defaults are reset when retrying. */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 7b28ab0..23236f6 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1138,6 +1138,8 @@ extern int drm_plane_init(struct drm_device *dev,
extern void drm_plane_cleanup(struct drm_plane *plane);
extern unsigned int drm_plane_index(struct drm_plane *plane);
extern void drm_plane_force_disable(struct drm_plane *plane);
+extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+ int *hdisplay, int *vdisplay);
extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
--
1.8.5.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH 2/5] drm: add helper to get crtc timings (v3)
2014-11-18 17:12 ` [PATCH 2/5] drm: add helper to get crtc timings (v3) Matt Roper
@ 2014-11-18 20:11 ` Ville Syrjälä
0 siblings, 0 replies; 6+ messages in thread
From: Ville Syrjälä @ 2014-11-18 20:11 UTC (permalink / raw)
To: Matt Roper; +Cc: intel-gfx, Gustavo Padovan, dri-devel
On Tue, Nov 18, 2014 at 09:12:49AM -0800, Matt Roper wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>
> We need to get hdisplay and vdisplay in a few places so create a
> helper to make our job easier.
>
> v2 (by Matt): Use new stereo doubling function (suggested by Ville)
>
> v3 (by Matt):
> - Add missing kerneldoc (Daniel)
> - Use drm_mode_copy() (Jani)
>
> Cc: dri-devel@lists.freedesktop.org
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 32 ++++++++++++++++++++++----------
> drivers/gpu/drm/i915/intel_display.c | 6 +++---
> include/drm/drm_crtc.h | 2 ++
> 3 files changed, 27 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 56737e7..be1a485 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -2494,6 +2494,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
> EXPORT_SYMBOL(drm_mode_set_config_internal);
>
> /**
> + * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
> + * @mode: mode to query
> + * @hdisplay: hdisplay value to fill in
> + * @vdisplay: vdisplay value to fill in
> + *
> + * The vdisplay value will be doubled if the specified mode is a stereo mode of
> + * the appropriate layout.
> + */
> +void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay)
> +{
> + struct drm_display_mode adjusted;
> +
> + drm_mode_copy(&adjusted, mode);
> + drm_mode_stereo_double(&adjusted);
Hmm. The mode may not have the crtc_ timings populated at all here, so
drm_mode_stereo_double() might just double some zeroes/garbage.
I don't recall anymore if I had some clever idea how to do this. I was
hoping we can avoid duplicating the stereo doubling logic in more than
once place, but maybe it's just easier to admit defeat?
I guess the options are:
1) duplciate some stereo doubling logic
2) populate the required crtc_ timings here as well
3) keep using drm_mode_set_crtcinfo() but remove the offending stuff
from the copied mode so that it doesn't interfere with the results
4) add more flags to drm_mode_set_crtcinfo() that prevent the offending
stuff from affecting the results
> + *hdisplay = adjusted.crtc_hdisplay;
> + *vdisplay = adjusted.crtc_vdisplay;
> +}
> +EXPORT_SYMBOL(drm_crtc_get_hv_timing);
> +
> +/**
> * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
> * CRTC viewport
> * @crtc: CRTC that framebuffer will be displayed on
> @@ -2510,16 +2531,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> {
> int hdisplay, vdisplay;
>
> - hdisplay = mode->hdisplay;
> - vdisplay = mode->vdisplay;
> -
> - if (drm_mode_is_stereo(mode)) {
> - struct drm_display_mode adjusted = *mode;
> -
> - drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
> - hdisplay = adjusted.crtc_hdisplay;
> - vdisplay = adjusted.crtc_vdisplay;
> - }
> + drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
>
> if (crtc->invert_dimensions)
> swap(hdisplay, vdisplay);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 320bf4c..a967623 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10158,9 +10158,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
> * computation to clearly distinguish it from the adjusted mode, which
> * can be changed by the connectors in the below retry loop.
> */
> - drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
> - pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
> - pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
> + drm_crtc_get_hv_timing(&pipe_config->requested_mode,
> + &pipe_config->pipe_src_w,
> + &pipe_config->pipe_src_h);
>
> encoder_retry:
> /* Ensure the port clock defaults are reset when retrying. */
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 7b28ab0..23236f6 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1138,6 +1138,8 @@ extern int drm_plane_init(struct drm_device *dev,
> extern void drm_plane_cleanup(struct drm_plane *plane);
> extern unsigned int drm_plane_index(struct drm_plane *plane);
> extern void drm_plane_force_disable(struct drm_plane *plane);
> +extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> + int *hdisplay, int *vdisplay);
> extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
> int x, int y,
> const struct drm_display_mode *mode,
> --
> 1.8.5.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread