dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Stefan Agner <stefan@agner.ch>
Cc: daniel.vetter@intel.com, dri-devel@lists.freedesktop.org
Subject: Re: [RFC] drm/fb-helper: reject any changes to the fbdev
Date: Wed, 12 Oct 2016 13:42:53 +0300	[thread overview]
Message-ID: <20161012104253.GT4329@intel.com> (raw)
In-Reply-To: <20161011231504.17688-1-stefan@agner.ch>

On Tue, Oct 11, 2016 at 04:15:04PM -0700, Stefan Agner wrote:
> The current fbdev emulation does not allow to push back changes in
> width, height or depth to KMS, hence reject any changes with an
> error. This makes sure that fbdev ioctl's fail properly and user
> space does not assume that changes succeeded.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> This rejects reconfiguration of framebuffer like
> fbset -rgba 5,6,5 -depth 16 (when in 24 bit mode by default)
> fbset -xres 123
> 
> I think all users of drm_fb_helper_check_var use also the generic
> drm_fb_helper_set_par (or do otherwise not support changing size/
> depth). Hence, afaict, the change should be the right thing to do
> for all driver...
> 
>  drivers/gpu/drm/drm_fb_helper.c | 13 ++++++++-----
>  1 file changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 03414bd..596c056 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -1211,11 +1211,14 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
>  	if (var->pixclock != 0 || in_dbg_master())
>  		return -EINVAL;
>  
> -	/* Need to resize the fb object !!! */
> -	if (var->bits_per_pixel > fb->bits_per_pixel ||
> -	    var->xres > fb->width || var->yres > fb->height ||
> -	    var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
> -		DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
> +	/*
> +	 * Changes struct fb_var_screeninfo are currently not pushed back
> +	 * to KMS, hence fail if different settings are requested.
> +	 */
> +	if (var->bits_per_pixel != fb->bits_per_pixel ||
> +	    var->xres != fb->width || var->yres != fb->height ||
> +	    var->xres_virtual != fb->width || var->yres_virtual != fb->height) {

This still looks somewhat incomplete. Sounds like we should just
reject changes to everything except xoffset/yoffset.

> +		DRM_DEBUG("fb userspace requested width/height/bpp different than current fb "
>  			  "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
>  			  var->xres, var->yres, var->bits_per_pixel,
>  			  var->xres_virtual, var->yres_virtual,
> -- 
> 2.10.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-10-12 10:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-11 23:15 [RFC] drm/fb-helper: reject any changes to the fbdev Stefan Agner
2016-10-12  7:01 ` Daniel Vetter
2016-10-12  9:37 ` Tomi Valkeinen
2016-10-17 14:43   ` Daniel Vetter
2016-10-12 10:42 ` Ville Syrjälä [this message]
2016-10-12 15:55   ` Stefan Agner
2016-10-12 16:12     ` Ville Syrjälä
2016-10-12 17:05       ` Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161012104253.GT4329@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=daniel.vetter@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox