From: Liviu Dudau <liviu.dudau@arm.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: Re: [RFC PATCH v2 2/5] drm: hdlcd: use vblank hooks in struct drm_crtc_funcs
Date: Fri, 27 Jan 2017 17:02:06 +0000 [thread overview]
Message-ID: <20170127170206.GG3140@e110455-lin.cambridge.arm.com> (raw)
In-Reply-To: <1485065346-11578-3-git-send-email-shawnguo@kernel.org>
On Sun, Jan 22, 2017 at 02:09:03PM +0800, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
>
> The vblank hooks in struct drm_driver are deprecated and only meant for
> legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks
> in struct drm_crtc_funcs should be used instead.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
> ---
> drivers/gpu/drm/arm/hdlcd_crtc.c | 20 ++++++++++++++++++++
> drivers/gpu/drm/arm/hdlcd_drv.c | 20 --------------------
> 2 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
> index 20ebfb4fbdfa..798a3cc480a2 100644
> --- a/drivers/gpu/drm/arm/hdlcd_crtc.c
> +++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
> @@ -42,6 +42,24 @@ static void hdlcd_crtc_cleanup(struct drm_crtc *crtc)
> drm_crtc_cleanup(crtc);
> }
>
> +static int hdlcd_crtc_enable_vblank(struct drm_crtc *crtc)
> +{
> + struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
> + unsigned int mask = hdlcd_read(hdlcd, HDLCD_REG_INT_MASK);
> +
> + hdlcd_write(hdlcd, HDLCD_REG_INT_MASK, mask | HDLCD_INTERRUPT_VSYNC);
> +
> + return 0;
> +}
> +
> +static void hdlcd_crtc_disable_vblank(struct drm_crtc *crtc)
> +{
> + struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
> + unsigned int mask = hdlcd_read(hdlcd, HDLCD_REG_INT_MASK);
> +
> + hdlcd_write(hdlcd, HDLCD_REG_INT_MASK, mask & ~HDLCD_INTERRUPT_VSYNC);
> +}
> +
> static const struct drm_crtc_funcs hdlcd_crtc_funcs = {
> .destroy = hdlcd_crtc_cleanup,
> .set_config = drm_atomic_helper_set_config,
> @@ -49,6 +67,8 @@ static void hdlcd_crtc_cleanup(struct drm_crtc *crtc)
> .reset = drm_atomic_helper_crtc_reset,
> .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> + .enable_vblank = hdlcd_crtc_enable_vblank,
> + .disable_vblank = hdlcd_crtc_disable_vblank,
> };
>
> static struct simplefb_format supported_formats[] = SIMPLEFB_FORMATS;
> diff --git a/drivers/gpu/drm/arm/hdlcd_drv.c b/drivers/gpu/drm/arm/hdlcd_drv.c
> index e5f4f4a6546d..6598ba4cc958 100644
> --- a/drivers/gpu/drm/arm/hdlcd_drv.c
> +++ b/drivers/gpu/drm/arm/hdlcd_drv.c
> @@ -199,24 +199,6 @@ static void hdlcd_irq_uninstall(struct drm_device *drm)
> hdlcd_write(hdlcd, HDLCD_REG_INT_MASK, irq_mask);
> }
>
> -static int hdlcd_enable_vblank(struct drm_device *drm, unsigned int crtc)
> -{
> - struct hdlcd_drm_private *hdlcd = drm->dev_private;
> - unsigned int mask = hdlcd_read(hdlcd, HDLCD_REG_INT_MASK);
> -
> - hdlcd_write(hdlcd, HDLCD_REG_INT_MASK, mask | HDLCD_INTERRUPT_VSYNC);
> -
> - return 0;
> -}
> -
> -static void hdlcd_disable_vblank(struct drm_device *drm, unsigned int crtc)
> -{
> - struct hdlcd_drm_private *hdlcd = drm->dev_private;
> - unsigned int mask = hdlcd_read(hdlcd, HDLCD_REG_INT_MASK);
> -
> - hdlcd_write(hdlcd, HDLCD_REG_INT_MASK, mask & ~HDLCD_INTERRUPT_VSYNC);
> -}
> -
> #ifdef CONFIG_DEBUG_FS
> static int hdlcd_show_underrun_count(struct seq_file *m, void *arg)
> {
> @@ -285,8 +267,6 @@ static void hdlcd_debugfs_cleanup(struct drm_minor *minor)
> .irq_postinstall = hdlcd_irq_postinstall,
> .irq_uninstall = hdlcd_irq_uninstall,
> .get_vblank_counter = drm_vblank_no_hw_counter,
> - .enable_vblank = hdlcd_enable_vblank,
> - .disable_vblank = hdlcd_disable_vblank,
> .gem_free_object_unlocked = drm_gem_cma_free_object,
> .gem_vm_ops = &drm_gem_cma_vm_ops,
> .dumb_create = drm_gem_cma_dumb_create,
> --
> 1.9.1
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-01-27 17:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-22 6:09 [RFC PATCH v2 0/5] Add vblank hooks to struct drm_crtc_funcs Shawn Guo
2017-01-22 6:09 ` [RFC PATCH v2 1/5] drm: add " Shawn Guo
2017-01-24 7:54 ` Daniel Vetter
2017-01-22 6:09 ` [RFC PATCH v2 2/5] drm: hdlcd: use vblank hooks in " Shawn Guo
2017-01-27 17:02 ` Liviu Dudau [this message]
2017-01-22 6:09 ` [RFC PATCH v2 3/5] drm: zte: zx_vou_enable[disable]_vblank can be static Shawn Guo
2017-01-22 6:09 ` [RFC PATCH v2 4/5] drm: rockchip: remove struct rockchip_crtc_funcs Shawn Guo
2017-01-22 6:09 ` [RFC PATCH v2 5/5] drm: imx: remove struct imx_drm_crtc and imx_drm_crtc_helper_funcs Shawn Guo
2017-01-24 7:55 ` [RFC PATCH v2 0/5] Add vblank hooks to struct drm_crtc_funcs Daniel Vetter
2017-02-07 7:32 ` Daniel Vetter
2017-02-07 8:34 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170127170206.GG3140@e110455-lin.cambridge.arm.com \
--to=liviu.dudau@arm.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox