[PATCH 0/5] drm: Fix rounding errors and use scaling in i915.

[PATCH 0/5] drm: Fix rounding errors and use scaling in i915.

[Maarten Lankhorst]

There were some small rounding errors in when clamping with
1.0001 and 0.9999 scaling, solve these and add a testcase for drm
helpers, which can be used to prevent more of these errors in the
future.

The testcases helped me find an error in v1, which wouldn't have
been found in another way.

Maarten Lankhorst (5):
  drm/rect: Round above 1 << 16 upwards to correct scale calculation functions.
  drm/rect: Handle rounding errors in drm_rect_clip_scaled, v2.
  drm/i915: Do not adjust scale when out of bounds, v2.
  drm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTEST
  drm/selftests: Add drm helper selftest

 drivers/gpu/drm/Kconfig                       |   9 +-
 drivers/gpu/drm/Makefile                      |   2 +-
 drivers/gpu/drm/drm_rect.c                    |  80 ++++--
 drivers/gpu/drm/i915/intel_sprite.c           | 144 +++-------
 drivers/gpu/drm/selftests/Makefile            |   2 +-
 .../gpu/drm/selftests/drm_helper_selftests.h  |   9 +
 drivers/gpu/drm/selftests/test-drm-helper.c   | 247 ++++++++++++++++++
 7 files changed, 362 insertions(+), 131 deletions(-)
 create mode 100644 drivers/gpu/drm/selftests/drm_helper_selftests.h
 create mode 100644 drivers/gpu/drm/selftests/test-drm-helper.c

-- 
2.17.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 1/5] drm/rect: Round above 1 << 16 upwards to correct scale calculation functions.

[Maarten Lankhorst]

When calculating limits we want to be as pessimistic as possible,
so we have to explicitly say whether we want to round up or down
to accurately calculate whether we are below min_scale or above
max_scale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/drm_rect.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
index 9817c1445ba9..b179c7c73cc5 100644
--- a/drivers/gpu/drm/drm_rect.c
+++ b/drivers/gpu/drm/drm_rect.c
@@ -106,7 +106,10 @@ static int drm_calc_scale(int src, int dst)
 	if (dst == 0)
 		return 0;
 
-	scale = src / dst;
+	if (src > (dst << 16))
+		return DIV_ROUND_UP(src, dst);
+	else
+		scale = src / dst;
 
 	return scale;
 }
@@ -121,6 +124,9 @@ static int drm_calc_scale(int src, int dst)
  * Calculate the horizontal scaling factor as
  * (@src width) / (@dst width).
  *
+ * If the scale is below 1 << 16, round down, if above up. This will
+ * calculate the scale with the most pessimistic limit calculation.
+ *
  * RETURNS:
  * The horizontal scaling factor, or errno of out of limits.
  */
@@ -152,6 +158,9 @@ EXPORT_SYMBOL(drm_rect_calc_hscale);
  * Calculate the vertical scaling factor as
  * (@src height) / (@dst height).
  *
+ * If the scale is below 1 << 16, round down, if above up. This will
+ * calculate the scale with the most pessimistic limit calculation.
+ *
  * RETURNS:
  * The vertical scaling factor, or errno of out of limits.
  */
@@ -189,6 +198,9 @@ EXPORT_SYMBOL(drm_rect_calc_vscale);
  * If the calculated scaling factor is above @max_vscale,
  * decrease the height of rectangle @src to compensate.
  *
+ * If the scale is below 1 << 16, round down, if above up. This will
+ * calculate the scale with the most pessimistic limit calculation.
+ *
  * RETURNS:
  * The horizontal scaling factor.
  */
@@ -239,6 +251,9 @@ EXPORT_SYMBOL(drm_rect_calc_hscale_relaxed);
  * If the calculated scaling factor is above @max_vscale,
  * decrease the height of rectangle @src to compensate.
  *
+ * If the scale is below 1 << 16, round down, if above up. This will
+ * calculate the scale with the most pessimistic limit calculation.
+ *
  * RETURNS:
  * The vertical scaling factor.
  */
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/5] drm/rect: Handle rounding errors in drm_rect_clip_scaled, v2.

[Maarten Lankhorst]

No matter how you perform the clip adjustments, a small
error may push the scaling factor to the other side of
0x10000. Solve this with a macro that will fixup the
scale to 0x10000 if we accidentally wrap to the other side.

Changes since v1:
- Adjust dst immediately, else drm_rect_width/height on dst gives bogus
  results.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/drm_rect.c | 71 ++++++++++++++++++++++++++++----------
 1 file changed, 52 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
index b179c7c73cc5..9d6194780a74 100644
--- a/drivers/gpu/drm/drm_rect.c
+++ b/drivers/gpu/drm/drm_rect.c
@@ -50,6 +50,24 @@ bool drm_rect_intersect(struct drm_rect *r1, const struct drm_rect *r2)
 }
 EXPORT_SYMBOL(drm_rect_intersect);
 
+static int drm_calc_scale(int src, int dst)
+{
+	int scale = 0;
+
+	if (WARN_ON(src < 0 || dst < 0))
+		return -EINVAL;
+
+	if (dst == 0)
+		return 0;
+
+	if (src > (dst << 16))
+		return DIV_ROUND_UP(src, dst);
+	else
+		scale = src / dst;
+
+	return scale;
+}
+
 /**
  * drm_rect_clip_scaled - perform a scaled clip operation
  * @src: source window rectangle
@@ -71,49 +89,64 @@ bool drm_rect_clip_scaled(struct drm_rect *src, struct drm_rect *dst,
 {
 	int diff;
 
+	/*
+	 * When scale is near 1.0 rounding errors may cause the scaling
+	 * factor to the other side. Some hardware may support
+	 * upsampling, but not downsampling, and that would break when
+	 * rounding.
+	 */
+#define FIXUP(oldscale, fn, m, second) do { \
+	if (oldscale != 1 << 16) { \
+		int newscale = drm_calc_scale(fn(src), fn(dst)); \
+ \
+		if (newscale < 0) \
+			return false; \
+ \
+		if ((oldscale < 0x10000) != (newscale < 0x10000)) { \
+			if (!second) \
+				src->m##1 = src->m##2 - (fn(dst) << 16); \
+			else \
+				src->m##2 = src->m##1 + (fn(dst) << 16); \
+		} \
+	} \
+ } while (0)
+
 	diff = clip->x1 - dst->x1;
 	if (diff > 0) {
 		int64_t tmp = src->x1 + (int64_t) diff * hscale;
 		src->x1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+		dst->x1 = clip->x1;
+		FIXUP(hscale, drm_rect_width, x, 0);
 	}
+
 	diff = clip->y1 - dst->y1;
 	if (diff > 0) {
 		int64_t tmp = src->y1 + (int64_t) diff * vscale;
 		src->y1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+		dst->y1 = clip->y1;
+		FIXUP(vscale, drm_rect_height, y, 0);
 	}
+
 	diff = dst->x2 - clip->x2;
 	if (diff > 0) {
 		int64_t tmp = src->x2 - (int64_t) diff * hscale;
 		src->x2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+		dst->x2 = clip->x2;
+		FIXUP(hscale, drm_rect_width, x, 1);
 	}
 	diff = dst->y2 - clip->y2;
 	if (diff > 0) {
 		int64_t tmp = src->y2 - (int64_t) diff * vscale;
 		src->y2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+		dst->y2 = clip->y2;
+		FIXUP(vscale, drm_rect_height, y, 1);
 	}
+#undef FIXUP
 
-	return drm_rect_intersect(dst, clip);
+	return drm_rect_visible(dst);
 }
 EXPORT_SYMBOL(drm_rect_clip_scaled);
 
-static int drm_calc_scale(int src, int dst)
-{
-	int scale = 0;
-
-	if (WARN_ON(src < 0 || dst < 0))
-		return -EINVAL;
-
-	if (dst == 0)
-		return 0;
-
-	if (src > (dst << 16))
-		return DIV_ROUND_UP(src, dst);
-	else
-		scale = src / dst;
-
-	return scale;
-}
-
 /**
  * drm_rect_calc_hscale - calculate the horizontal scaling factor
  * @src: source window rectangle
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 3/5] drm/i915: Do not adjust scale when out of bounds, v2.

[Maarten Lankhorst]

With the previous patch drm_atomic_helper_check_plane_state correctly
calculates clipping and the xf86-video-intel ddx is fixed to fall back
to GPU correctly when SetPlane fails, we can remove the hack where
we try to pan/zoom when out of min/max scaling range. This was already
poor behavior where the screen didn't show what was requested, and now
instead we reject it outright. This simplifies check_sprite_plane a lot.

Changes since v1:
- Set crtc_h to the height correctly.
- Reject < 3x3 rectangles instead of making them invisible for <gen9.
  For gen9+ skl_update_scaler_plane will reject them.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_sprite.c | 144 +++++++---------------------
 1 file changed, 35 insertions(+), 109 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index aa1dfaa692b9..970015dcc6f1 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -936,22 +936,12 @@ intel_check_sprite_plane(struct intel_plane *plane,
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
 	struct drm_framebuffer *fb = state->base.fb;
-	int crtc_x, crtc_y;
-	unsigned int crtc_w, crtc_h;
-	uint32_t src_x, src_y, src_w, src_h;
-	struct drm_rect *src = &state->base.src;
-	struct drm_rect *dst = &state->base.dst;
-	struct drm_rect clip = {};
 	int max_stride = INTEL_GEN(dev_priv) >= 9 ? 32768 : 16384;
-	int hscale, vscale;
 	int max_scale, min_scale;
 	bool can_scale;
 	int ret;
 	uint32_t pixel_format = 0;
 
-	*src = drm_plane_state_src(&state->base);
-	*dst = drm_plane_state_dest(&state->base);
-
 	if (!fb) {
 		state->base.visible = false;
 		return 0;
@@ -990,64 +980,19 @@ intel_check_sprite_plane(struct intel_plane *plane,
 		min_scale = plane->can_scale ? 1 : (1 << 16);
 	}
 
-	/*
-	 * FIXME the following code does a bunch of fuzzy adjustments to the
-	 * coordinates and sizes. We probably need some way to decide whether
-	 * more strict checking should be done instead.
-	 */
-	drm_rect_rotate(src, fb->width << 16, fb->height << 16,
-			state->base.rotation);
-
-	hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
-	BUG_ON(hscale < 0);
-
-	vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
-	BUG_ON(vscale < 0);
-
-	if (crtc_state->base.enable)
-		drm_mode_get_hv_timing(&crtc_state->base.mode,
-				       &clip.x2, &clip.y2);
-
-	state->base.visible = drm_rect_clip_scaled(src, dst, &clip, hscale, vscale);
-
-	crtc_x = dst->x1;
-	crtc_y = dst->y1;
-	crtc_w = drm_rect_width(dst);
-	crtc_h = drm_rect_height(dst);
+	ret = drm_atomic_helper_check_plane_state(&state->base,
+						  &crtc_state->base,
+						  min_scale, max_scale,
+						  true, true);
+	if (ret)
+		return ret;
 
 	if (state->base.visible) {
-		/* check again in case clipping clamped the results */
-		hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
-		if (hscale < 0) {
-			DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
-			drm_rect_debug_print("src: ", src, true);
-			drm_rect_debug_print("dst: ", dst, false);
-
-			return hscale;
-		}
-
-		vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
-		if (vscale < 0) {
-			DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
-			drm_rect_debug_print("src: ", src, true);
-			drm_rect_debug_print("dst: ", dst, false);
-
-			return vscale;
-		}
-
-		/* Make the source viewport size an exact multiple of the scaling factors. */
-		drm_rect_adjust_size(src,
-				     drm_rect_width(dst) * hscale - drm_rect_width(src),
-				     drm_rect_height(dst) * vscale - drm_rect_height(src));
-
-		drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
-				    state->base.rotation);
-
-		/* sanity check to make sure the src viewport wasn't enlarged */
-		WARN_ON(src->x1 < (int) state->base.src_x ||
-			src->y1 < (int) state->base.src_y ||
-			src->x2 > (int) state->base.src_x + state->base.src_w ||
-			src->y2 > (int) state->base.src_y + state->base.src_h);
+		struct drm_rect *src = &state->base.src;
+		struct drm_rect *dst = &state->base.dst;
+		unsigned int crtc_w = drm_rect_width(dst);
+		unsigned int crtc_h = drm_rect_height(dst);
+		uint32_t src_x, src_y, src_w, src_h;
 
 		/*
 		 * Hardware doesn't handle subpixel coordinates.
@@ -1060,58 +1005,39 @@ intel_check_sprite_plane(struct intel_plane *plane,
 		src_y = src->y1 >> 16;
 		src_h = drm_rect_height(src) >> 16;
 
-		if (intel_format_is_yuv(fb->format->format)) {
-			src_x &= ~1;
-			src_w &= ~1;
-
-			/*
-			 * Must keep src and dst the
-			 * same if we can't scale.
-			 */
-			if (!can_scale)
-				crtc_w &= ~1;
+		src->x1 = src_x << 16;
+		src->x2 = (src_x + src_w) << 16;
+		src->y1 = src_y << 16;
+		src->y2 = (src_y + src_h) << 16;
 
-			if (crtc_w == 0)
-				state->base.visible = false;
+		if (intel_format_is_yuv(fb->format->format) &&
+		    (src_x % 2 || src_w % 2)) {
+			DRM_DEBUG_KMS("src x/w (%u, %u) must be a multiple of 2 for YUV planes\n",
+				      src_x, src_w);
+			return -EINVAL;
 		}
-	}
 
-	/* Check size restrictions when scaling */
-	if (state->base.visible && (src_w != crtc_w || src_h != crtc_h)) {
-		unsigned int width_bytes;
-		int cpp = fb->format->cpp[0];
+		/* Check size restrictions when scaling */
+		if (src_w != crtc_w || src_h != crtc_h) {
+			unsigned int width_bytes;
+			int cpp = fb->format->cpp[0];
 
-		WARN_ON(!can_scale);
+			WARN_ON(!can_scale);
 
-		/* FIXME interlacing min height is 6 */
+			width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
 
-		if (crtc_w < 3 || crtc_h < 3)
-			state->base.visible = false;
-
-		if (src_w < 3 || src_h < 3)
-			state->base.visible = false;
-
-		width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
-
-		if (INTEL_GEN(dev_priv) < 9 && (src_w > 2048 || src_h > 2048 ||
-		    width_bytes > 4096 || fb->pitches[0] > 4096)) {
-			DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
-			return -EINVAL;
+			/* FIXME interlacing min height is 6 */
+			if (INTEL_GEN(dev_priv) < 9 && (
+			     src_w < 3 || src_h < 3 ||
+			     src_w > 2048 || src_h > 2048 ||
+			     crtc_w < 3 || crtc_h < 3 ||
+			     width_bytes > 4096 || fb->pitches[0] > 4096)) {
+				DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
+				return -EINVAL;
+			}
 		}
 	}
 
-	if (state->base.visible) {
-		src->x1 = src_x << 16;
-		src->x2 = (src_x + src_w) << 16;
-		src->y1 = src_y << 16;
-		src->y2 = (src_y + src_h) << 16;
-	}
-
-	dst->x1 = crtc_x;
-	dst->x2 = crtc_x + crtc_w;
-	dst->y1 = crtc_y;
-	dst->y2 = crtc_y + crtc_h;
-
 	if (INTEL_GEN(dev_priv) >= 9) {
 		ret = skl_check_plane_surface(crtc_state, state);
 		if (ret)
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 4/5] drm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTEST

[Maarten Lankhorst]

We want to add more DRM selftests, and there's not much point in
having a Kconfig option for every single one of them, so make
a generic one.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/Kconfig            | 8 ++++----
 drivers/gpu/drm/Makefile           | 2 +-
 drivers/gpu/drm/selftests/Makefile | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 757825ac60df..d684855b95c2 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -49,16 +49,16 @@ config DRM_DEBUG_MM
 
 	  If in doubt, say "N".
 
-config DRM_DEBUG_MM_SELFTEST
-	tristate "kselftests for DRM range manager (struct drm_mm)"
+config DRM_DEBUG_SELFTEST
+	tristate "kselftests for DRM"
 	depends on DRM
 	depends on DEBUG_KERNEL
 	select PRIME_NUMBERS
 	select DRM_LIB_RANDOM
 	default n
 	help
-	  This option provides a kernel module that can be used to test
-	  the DRM range manager (drm_mm) and its API. This option is not
+	  This option provides kernel modules that can be used to run
+	  various selftests on parts of the DRM api. This option is not
 	  useful for distributions or general kernels, but only for kernel
 	  developers working on DRM and associated drivers.
 
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 9d66657ea117..4becc245e359 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -43,7 +43,7 @@ drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
 drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
 
 obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
-obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
+obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
diff --git a/drivers/gpu/drm/selftests/Makefile b/drivers/gpu/drm/selftests/Makefile
index 4aebfc7f27d4..f7dd66e859a9 100644
--- a/drivers/gpu/drm/selftests/Makefile
+++ b/drivers/gpu/drm/selftests/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += test-drm_mm.o
+obj-$(CONFIG_DRM_DEBUG_SELFTEST) += test-drm_mm.o
-- 
2.17.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH 5/5] drm/selftests: Add drm helper selftest

[Maarten Lankhorst]

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/Kconfig                       |   1 +
 drivers/gpu/drm/selftests/Makefile            |   2 +-
 .../gpu/drm/selftests/drm_helper_selftests.h  |   9 +
 drivers/gpu/drm/selftests/test-drm-helper.c   | 247 ++++++++++++++++++
 4 files changed, 258 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/selftests/drm_helper_selftests.h
 create mode 100644 drivers/gpu/drm/selftests/test-drm-helper.c

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index d684855b95c2..28d059007ac2 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -55,6 +55,7 @@ config DRM_DEBUG_SELFTEST
 	depends on DEBUG_KERNEL
 	select PRIME_NUMBERS
 	select DRM_LIB_RANDOM
+	select DRM_KMS_HELPER
 	default n
 	help
 	  This option provides kernel modules that can be used to run
diff --git a/drivers/gpu/drm/selftests/Makefile b/drivers/gpu/drm/selftests/Makefile
index f7dd66e859a9..9fc349fa18e9 100644
--- a/drivers/gpu/drm/selftests/Makefile
+++ b/drivers/gpu/drm/selftests/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_DRM_DEBUG_SELFTEST) += test-drm_mm.o
+obj-$(CONFIG_DRM_DEBUG_SELFTEST) += test-drm_mm.o test-drm-helper.o
diff --git a/drivers/gpu/drm/selftests/drm_helper_selftests.h b/drivers/gpu/drm/selftests/drm_helper_selftests.h
new file mode 100644
index 000000000000..9771290ed228
--- /dev/null
+++ b/drivers/gpu/drm/selftests/drm_helper_selftests.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* List each unit test as selftest(name, function)
+ *
+ * The name is used as both an enum and expanded as igt__name to create
+ * a module parameter. It must be unique and legal for a C identifier.
+ *
+ * Tests are executed in order by igt/drm_selftests_helper
+ */
+selftest(check_plane_state, igt_check_plane_state)
diff --git a/drivers/gpu/drm/selftests/test-drm-helper.c b/drivers/gpu/drm/selftests/test-drm-helper.c
new file mode 100644
index 000000000000..a015712b43e8
--- /dev/null
+++ b/drivers/gpu/drm/selftests/test-drm-helper.c
@@ -0,0 +1,247 @@
+/*
+ * Test cases for the drm_kms_helper functions
+ */
+
+#define pr_fmt(fmt) "drm_kms_helper: " fmt
+
+#include <linux/module.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_modes.h>
+
+#define TESTS "drm_helper_selftests.h"
+#include "drm_selftest.h"
+
+#define FAIL(test, msg, ...) \
+	do { \
+		if (test) { \
+			pr_err("%s/%u: " msg, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
+			return -EINVAL; \
+		} \
+	} while (0)
+
+#define FAIL_ON(x) FAIL((x), "%s", "FAIL_ON(" __stringify(x) ")\n")
+
+static void set_src(struct drm_plane_state *plane_state,
+		    unsigned src_x, unsigned src_y,
+		    unsigned src_w, unsigned src_h)
+{
+	plane_state->src_x = src_x;
+	plane_state->src_y = src_y;
+	plane_state->src_w = src_w;
+	plane_state->src_h = src_h;
+}
+
+static bool check_src_eq(struct drm_plane_state *plane_state,
+			 unsigned src_x, unsigned src_y,
+			 unsigned src_w, unsigned src_h)
+{
+	if (plane_state->src.x1 < 0) {
+		pr_err("src x coordinate %x should never be below 0.\n", plane_state->src.x1);
+		drm_rect_debug_print("src: ", &plane_state->src, true);
+		return false;
+	}
+	if (plane_state->src.y1 < 0) {
+		pr_err("src y coordinate %x should never be below 0.\n", plane_state->src.y1);
+		drm_rect_debug_print("src: ", &plane_state->src, true);
+		return false;
+	}
+
+	if (plane_state->src.x1 != src_x ||
+	    plane_state->src.y1 != src_y ||
+	    drm_rect_width(&plane_state->src) != src_w ||
+	    drm_rect_height(&plane_state->src) != src_h) {
+		drm_rect_debug_print("src: ", &plane_state->src, true);
+		return false;
+	}
+
+	return true;
+}
+
+static void set_crtc(struct drm_plane_state *plane_state,
+		     int crtc_x, int crtc_y,
+		     unsigned crtc_w, unsigned crtc_h)
+{
+	plane_state->crtc_x = crtc_x;
+	plane_state->crtc_y = crtc_y;
+	plane_state->crtc_w = crtc_w;
+	plane_state->crtc_h = crtc_h;
+}
+
+static bool check_crtc_eq(struct drm_plane_state *plane_state,
+			  int crtc_x, int crtc_y,
+			  unsigned crtc_w, unsigned crtc_h)
+{
+	if (plane_state->dst.x1 != crtc_x ||
+	    plane_state->dst.y1 != crtc_y ||
+	    drm_rect_width(&plane_state->dst) != crtc_w ||
+	    drm_rect_height(&plane_state->dst) != crtc_h) {
+		drm_rect_debug_print("dst: ", &plane_state->dst, false);
+
+		return false;
+	}
+
+	return true;
+}
+
+static int igt_check_plane_state(void *ignored)
+{
+	int ret;
+
+	const struct drm_crtc_state crtc_state = {
+		.crtc = ZERO_SIZE_PTR,
+		.enable = true,
+		.active = true,
+		.mode = {
+			DRM_MODE("1024x768", 0, 65000, 1024, 1048,
+				1184, 1344, 0, 768, 771, 777, 806, 0,
+				DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC)
+		},
+	};
+	struct drm_framebuffer fb = {
+		.width = 2048,
+		.height = 2048
+	};
+	struct drm_plane_state plane_state = {
+		.crtc = ZERO_SIZE_PTR,
+		.fb = &fb,
+		.rotation = DRM_MODE_ROTATE_0
+	};
+
+	/* Simple clipping, no scaling. */
+	set_src(&plane_state, 0, 0, fb.width << 16, fb.height << 16);
+	set_crtc(&plane_state, 0, 0, fb.width, fb.height);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(ret < 0, "Simple clipping check should pass\n");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1024 << 16, 768 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+	/* Rotated clipping + reflection, no scaling. */
+	plane_state.rotation = DRM_MODE_ROTATE_90 | DRM_MODE_REFLECT_X;
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(ret < 0, "Rotated clipping check should pass\n");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 768 << 16, 1024 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+	plane_state.rotation = DRM_MODE_ROTATE_0;
+
+	/* Check whether positioning works correctly. */
+	set_src(&plane_state, 0, 0, 1023 << 16, 767 << 16);
+	set_crtc(&plane_state, 0, 0, 1023, 767);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(!ret, "Should not be able to position on the crtc with can_position=false\n");
+
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  true, false);
+	FAIL(ret < 0, "Simple positioning should work\n");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1023 << 16, 767 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1023, 767));
+
+	/* Simple scaling tests. */
+	set_src(&plane_state, 0, 0, 512 << 16, 384 << 16);
+	set_crtc(&plane_state, 0, 0, 1024, 768);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  0x8001,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(!ret, "Upscaling out of range should fail.\n");
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  0x8000,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(ret < 0, "Upscaling exactly 2x should work\n");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 512 << 16, 384 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+	set_src(&plane_state, 0, 0, 2048 << 16, 1536 << 16);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  0x1ffff, false, false);
+	FAIL(!ret, "Downscaling out of range should fail.\n");
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  0x20000, false, false);
+	FAIL(ret < 0, "Should succeed with exact scaling limit\n");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2048 << 16, 1536 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+	/* Testing rounding errors. */
+	set_src(&plane_state, 0, 0, 0x40001, 0x40001);
+	set_crtc(&plane_state, 1022, 766, 4, 4);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  0x10001,
+						  true, false);
+	FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2));
+
+	set_src(&plane_state, 0x20001, 0x20001, 0x4040001, 0x3040001);
+	set_crtc(&plane_state, -2, -2, 1028, 772);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  0x10001,
+						  false, false);
+	FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0x40002, 0x40002, 1024 << 16, 768 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+	set_src(&plane_state, 0, 0, 0x3ffff, 0x3ffff);
+	set_crtc(&plane_state, 1022, 766, 4, 4);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  0xffff,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  true, false);
+	FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+	FAIL_ON(!plane_state.visible);
+	/* Should not be rounded to 0x20001, which would be upscaling. */
+	FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2));
+
+	set_src(&plane_state, 0x1ffff, 0x1ffff, 0x403ffff, 0x303ffff);
+	set_crtc(&plane_state, -2, -2, 1028, 772);
+	ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+						  0xffff,
+						  DRM_PLANE_HELPER_NO_SCALING,
+						  false, false);
+	FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+	FAIL_ON(!plane_state.visible);
+	FAIL_ON(!check_src_eq(&plane_state, 0x3fffe, 0x3fffe, 1024 << 16, 768 << 16));
+	FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+	return 0;
+}
+
+#include "drm_selftest.c"
+
+static int __init test_drm_helper_init(void)
+{
+	int err;
+
+	err = run_selftests(selftests, ARRAY_SIZE(selftests), NULL);
+
+	return err > 0 ? 0 : err;
+}
+
+module_init(test_drm_helper_init);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel