* [PATCH v9 0/2] Enabling content-type setting for HDMI displays. @ 2018-05-07 13:16 StanLis 2018-05-07 13:16 ` [PATCH v9 1/2] drm: content-type property for HDMI connector StanLis 2018-05-07 13:16 ` [PATCH v9 2/2] i915: " StanLis 0 siblings, 2 replies; 6+ messages in thread From: StanLis @ 2018-05-07 13:16 UTC (permalink / raw) To: dri-devel; +Cc: intel-gfx From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Added content type setting property to drm_connector(part 1) and enabled transmitting it with HDMI AVI infoframes for i915(part 2). Stanislav Lisovskiy (2): drm: content-type property for HDMI connector i915: content-type property for HDMI connector Documentation/gpu/drm-kms.rst | 6 +++ Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/drm_atomic.c | 4 ++ drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++++++++++++ drivers/gpu/drm/drm_edid.c | 55 +++++++++++++++++++++ drivers/gpu/drm/i915/intel_atomic.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 24 ++++++--- include/drm/drm_connector.h | 12 +++++ include/drm/drm_edid.h | 6 +++ include/drm/drm_mode_config.h | 5 ++ include/uapi/drm/drm_mode.h | 7 +++ 11 files changed, 189 insertions(+), 6 deletions(-) -- 2.17.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v9 1/2] drm: content-type property for HDMI connector 2018-05-07 13:16 [PATCH v9 0/2] Enabling content-type setting for HDMI displays StanLis @ 2018-05-07 13:16 ` StanLis 2018-05-07 14:05 ` [Intel-gfx] " Daniel Vetter 2018-05-07 13:16 ` [PATCH v9 2/2] i915: " StanLis 1 sibling, 1 reply; 6+ messages in thread From: StanLis @ 2018-05-07 13:16 UTC (permalink / raw) To: dri-devel; +Cc: intel-gfx From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Added content_type property to drm_connector_state in order to properly handle external HDMI TV content-type setting. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> --- Documentation/gpu/drm-kms.rst | 6 +++ Documentation/gpu/kms-properties.csv | 1 + drivers/gpu/drm/drm_atomic.c | 4 ++ drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++++++++++++ drivers/gpu/drm/drm_edid.c | 55 +++++++++++++++++++++ include/drm/drm_connector.h | 12 +++++ include/drm/drm_edid.h | 6 +++ include/drm/drm_mode_config.h | 5 ++ include/uapi/drm/drm_mode.h | 7 +++ 9 files changed, 170 insertions(+) diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 1dffd1ac4cd4..e233c2626bd0 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -517,6 +517,12 @@ Standard Connector Properties .. kernel-doc:: drivers/gpu/drm/drm_connector.c :doc: standard connector properties +HDMI Specific Connector Properties +----------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: HDMI connector properties + Plane Composition Properties ---------------------------- diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv index 07ed22ea3bd6..bfde04eddd14 100644 --- a/Documentation/gpu/kms-properties.csv +++ b/Documentation/gpu/kms-properties.csv @@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB +,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255." ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 3d9ae057a6cd..6c1e1e774517 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -1270,6 +1270,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector, state->link_status = val; } else if (property == config->aspect_ratio_property) { state->picture_aspect_ratio = val; + } else if (property == config->content_type_property) { + state->content_type = val; } else if (property == connector->scaling_mode_property) { state->scaling_mode = val; } else if (property == connector->content_protection_property) { @@ -1355,6 +1357,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, *val = state->link_status; } else if (property == config->aspect_ratio_property) { *val = state->picture_aspect_ratio; + } else if (property == config->content_type_property) { + *val = state->content_type; } else if (property == connector->scaling_mode_property) { *val = state->scaling_mode; } else if (property == connector->content_protection_property) { diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index b3cde897cd80..fe63395f159d 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -720,6 +720,14 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, }; +static const struct drm_prop_enum_list drm_content_type_enum_list[] = { + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, +}; + static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = { { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" }, { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" }, @@ -996,6 +1004,45 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); + +/** + * DOC: HDMI connector properties + * + * content type (HDMI specific): + * Indicates content type setting to be used in HDMI infoframes to indicate + * content type for the external device, so that it adjusts it's display + * settings accordingly. + * + * The value of this property can be one of the following: + * + * No Data: + * Content type is unknown + * Graphics: + * Content type is graphics + * Photo: + * Content type is photo + * Cinema: + * Content type is cinema + * Game: + * Content type is game + */ + +/** + * drm_connector_attach_content_type_property - attach content-type property + * @connector: connector to attach content type property on. + * + * Called by a driver the first time a HDMI connector is made. + */ +int drm_connector_attach_content_type_property(struct drm_connector *connector) +{ + if (!drm_mode_create_content_type_property(connector->dev)) + drm_object_attach_property(&connector->base, + connector->dev->mode_config.content_type_property, + DRM_MODE_CONTENT_TYPE_NO_DATA); + return 0; +} +EXPORT_SYMBOL(drm_connector_attach_content_type_property); + /** * drm_create_tv_properties - create TV specific connector properties * @dev: DRM device @@ -1260,6 +1307,33 @@ int drm_mode_create_aspect_ratio_property(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); +/** + * drm_mode_create_content_type_property - create content type property + * @dev: DRM device + * + * Called by a driver the first time it's needed, must be attached to desired + * connectors. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_mode_create_content_type_property(struct drm_device *dev) +{ + if (dev->mode_config.content_type_property) + return 0; + + dev->mode_config.content_type_property = + drm_property_create_enum(dev, 0, "content type", + drm_content_type_enum_list, + ARRAY_SIZE(drm_content_type_enum_list)); + + if (dev->mode_config.content_type_property == NULL) + return -ENOMEM; + + return 0; +} +EXPORT_SYMBOL(drm_mode_create_content_type_property); + /** * drm_mode_create_suggested_offset_properties - create suggests offset properties * @dev: DRM device diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 134069f36482..9ecda0b2a4d8 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4868,6 +4868,14 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; + /* + * As some drivers don't support atomic, we can't use connector state. + * So just initialize the frame with default values, just the same way + * as it's done with other properties here. + */ + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; + frame->itc = 0; + /* * Populate picture aspect ratio from either * user input (if specified) or from the CEA mode list. @@ -4886,6 +4894,53 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, } EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode); +/** + * drm_hdmi_get_itc_bit_from_property() - get the HDMI IT content bit + * from content type property. + * content_type: Content type DRM property value + * + */ +bool +drm_hdmi_get_itc_bit_from_property(unsigned int content_type) +{ + /* Whenever something else than "No Data", IT Content bit must be set */ + return content_type != DRM_MODE_CONTENT_TYPE_NO_DATA ? true : false; +} +EXPORT_SYMBOL(drm_hdmi_get_itc_bit_from_property); + +/** + * drm_hdmi_get_content_type_from_property() - get the HDMI content type bits + * from content type property. + * content_type: Content type DRM property value + * + */ +enum hdmi_content_type +drm_hdmi_get_content_type_from_property(unsigned int content_type) +{ + enum hdmi_content_type ret; + + switch (content_type) { + case DRM_MODE_CONTENT_TYPE_GRAPHICS: + ret = HDMI_CONTENT_TYPE_GRAPHICS; + break; + case DRM_MODE_CONTENT_TYPE_CINEMA: + ret = HDMI_CONTENT_TYPE_CINEMA; + break; + case DRM_MODE_CONTENT_TYPE_GAME: + ret = HDMI_CONTENT_TYPE_GAME; + break; + case DRM_MODE_CONTENT_TYPE_PHOTO: + ret = HDMI_CONTENT_TYPE_PHOTO; + break; + default: + /* Graphics is the default(0) */ + ret = HDMI_CONTENT_TYPE_GRAPHICS; + } + return ret; +} +EXPORT_SYMBOL(drm_hdmi_get_content_type_from_property); + + /** * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe * quantization range information diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 675cc3f8cf85..178fa3f3f5f7 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -418,6 +418,16 @@ struct drm_connector_state { */ enum hdmi_picture_aspect picture_aspect_ratio; + + /** + * @content_type: Connector property to control the + * HDMI infoframe content type setting. + * The %DRM_MODE_CONTENT_TYPE_\* values much + * match the values. + */ + unsigned int content_type; + + /** * @scaling_mode: Connector property to control the * upscaling, mostly used for built-in panels. @@ -1089,11 +1099,13 @@ int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, const char * const modes[]); int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_connector_attach_content_type_property(struct drm_connector *dev); int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, u32 scaling_mode_mask); int drm_connector_attach_content_protection_property( struct drm_connector *connector); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); +int drm_mode_create_content_type_property(struct drm_device *dev); int drm_mode_create_suggested_offset_properties(struct drm_device *dev); int drm_mode_connector_set_path_property(struct drm_connector *connector, diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 8d89a9c3748d..4e264c4d8a9b 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -350,6 +350,12 @@ drm_load_edid_firmware(struct drm_connector *connector) } #endif +bool +drm_hdmi_get_itc_bit_from_property(unsigned int content_type); + +enum hdmi_content_type +drm_hdmi_get_content_type_from_property(unsigned int content_type); + int drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, const struct drm_display_mode *mode, diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 33b3a96d66d0..fb45839179dd 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -726,6 +726,11 @@ struct drm_mode_config { * HDMI infoframe aspect ratio setting. */ struct drm_property *aspect_ratio_property; + /** + * @content_type_property: Optional connector property to control the + * HDMI infoframe content type setting. + */ + struct drm_property *content_type_property; /** * @degamma_lut_property: Optional CRTC property to set the LUT used to * convert the framebuffer's colors to linear gamma. diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 50bcf4214ff9..cad9e09ffaee 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -94,6 +94,13 @@ extern "C" { #define DRM_MODE_PICTURE_ASPECT_4_3 1 #define DRM_MODE_PICTURE_ASPECT_16_9 2 +/* Content type options */ +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 +#define DRM_MODE_CONTENT_TYPE_GAME 4 + /* Aspect ratio flag bitmask (4 bits 22:19) */ #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) #define DRM_MODE_FLAG_PIC_AR_NONE \ -- 2.17.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [PATCH v9 1/2] drm: content-type property for HDMI connector 2018-05-07 13:16 ` [PATCH v9 1/2] drm: content-type property for HDMI connector StanLis @ 2018-05-07 14:05 ` Daniel Vetter 2018-05-08 7:18 ` Lisovskiy, Stanislav 0 siblings, 1 reply; 6+ messages in thread From: Daniel Vetter @ 2018-05-07 14:05 UTC (permalink / raw) To: StanLis; +Cc: intel-gfx, dri-devel On Mon, May 07, 2018 at 04:16:40PM +0300, StanLis wrote: > From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > > Added content_type property to drm_connector_state > in order to properly handle external HDMI TV content-type setting. > > v2: > * Moved helper function which attaches content type property > to the drm core, as was suggested. > Removed redundant connector state initialization. > > v3: > * Removed caps in drm_content_type_enum_list. > After some discussion it turned out that HDMI Spec 1.4 > was wrongly assuming that IT Content(itc) bit doesn't affect > Content type states, however itc bit needs to be manupulated > as well. In order to not expose additional property for itc, > for sake of simplicity it was decided to bind those together > in same "content type" property. > > v4: > * Added it_content checking in intel_digital_connector_atomic_check. > Fixed documentation for new content type enum. > > v5: > * Moved patch revision's description to commit messages. > > v6: > * Minor naming fix for the content type enumeration string. > > v7: > * Fix parameter name for documentation and parameter alignment > in order not to get warning. Added Content Type description to > new HDMI connector properties section. > > v8: > * Thrown away unneeded numbers from HDMI content-type property > description. Switch to strings desription instead of plain > definitions. > > v9: > * Moved away hdmi specific content-type enum from > drm_connector_state. Content type property should probably not > be bound to any specific connector interface in > drm_connector_state. > Same probably should be done to hdmi_picture_aspect_ration enum > which is also contained in drm_connector_state. Added special > helper function to get derive hdmi specific relevant infoframe > fields. > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > --- > Documentation/gpu/drm-kms.rst | 6 +++ > Documentation/gpu/kms-properties.csv | 1 + > drivers/gpu/drm/drm_atomic.c | 4 ++ > drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++++++++++++ > drivers/gpu/drm/drm_edid.c | 55 +++++++++++++++++++++ > include/drm/drm_connector.h | 12 +++++ > include/drm/drm_edid.h | 6 +++ > include/drm/drm_mode_config.h | 5 ++ > include/uapi/drm/drm_mode.h | 7 +++ > 9 files changed, 170 insertions(+) > > diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst > index 1dffd1ac4cd4..e233c2626bd0 100644 > --- a/Documentation/gpu/drm-kms.rst > +++ b/Documentation/gpu/drm-kms.rst > @@ -517,6 +517,12 @@ Standard Connector Properties > .. kernel-doc:: drivers/gpu/drm/drm_connector.c > :doc: standard connector properties > > +HDMI Specific Connector Properties > +----------------------------- > + > +.. kernel-doc:: drivers/gpu/drm/drm_connector.c > + :doc: HDMI connector properties > + > Plane Composition Properties > ---------------------------- > > diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv > index 07ed22ea3bd6..bfde04eddd14 100644 > --- a/Documentation/gpu/kms-properties.csv > +++ b/Documentation/gpu/kms-properties.csv > @@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De > ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector > ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector > ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB > +,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD > i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255." > ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD > ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c > index 3d9ae057a6cd..6c1e1e774517 100644 > --- a/drivers/gpu/drm/drm_atomic.c > +++ b/drivers/gpu/drm/drm_atomic.c > @@ -1270,6 +1270,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector, > state->link_status = val; > } else if (property == config->aspect_ratio_property) { > state->picture_aspect_ratio = val; > + } else if (property == config->content_type_property) { > + state->content_type = val; > } else if (property == connector->scaling_mode_property) { > state->scaling_mode = val; > } else if (property == connector->content_protection_property) { > @@ -1355,6 +1357,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector, > *val = state->link_status; > } else if (property == config->aspect_ratio_property) { > *val = state->picture_aspect_ratio; > + } else if (property == config->content_type_property) { > + *val = state->content_type; > } else if (property == connector->scaling_mode_property) { > *val = state->scaling_mode; > } else if (property == connector->content_protection_property) { > diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c > index b3cde897cd80..fe63395f159d 100644 > --- a/drivers/gpu/drm/drm_connector.c > +++ b/drivers/gpu/drm/drm_connector.c > @@ -720,6 +720,14 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { > { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, > }; > > +static const struct drm_prop_enum_list drm_content_type_enum_list[] = { > + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, > + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, > + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, > + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, > + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, > +}; > + > static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = { > { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" }, > { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" }, > @@ -996,6 +1004,45 @@ int drm_mode_create_dvi_i_properties(struct drm_device *dev) > } > EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); > > + > +/** > + * DOC: HDMI connector properties > + * > + * content type (HDMI specific): > + * Indicates content type setting to be used in HDMI infoframes to indicate > + * content type for the external device, so that it adjusts it's display > + * settings accordingly. > + * > + * The value of this property can be one of the following: > + * > + * No Data: > + * Content type is unknown > + * Graphics: > + * Content type is graphics > + * Photo: > + * Content type is photo > + * Cinema: > + * Content type is cinema > + * Game: > + * Content type is game Links to the function that set up/use the property would be good here. I.e. "Drivers can set up this property by calling drm_connector_attach_content_type_property(). Decoding to infoframe values is done through drm_hdmi_get_content_type_from_property() and drm_hdmi_get_itc_bit_from_property()." Aside: A simple helper that computes the correct infoframes from the drm_connector_state and drm_display_info, without forcing drivers to call a gazillion individual helper functions would be real nice. But that's for someone else I think - all the verbosity here simply annoys me a bit. With the above kerneldoc polish: Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> -Daniel > + */ > + > +/** > + * drm_connector_attach_content_type_property - attach content-type property > + * @connector: connector to attach content type property on. > + * > + * Called by a driver the first time a HDMI connector is made. > + */ > +int drm_connector_attach_content_type_property(struct drm_connector *connector) > +{ > + if (!drm_mode_create_content_type_property(connector->dev)) > + drm_object_attach_property(&connector->base, > + connector->dev->mode_config.content_type_property, > + DRM_MODE_CONTENT_TYPE_NO_DATA); > + return 0; > +} > +EXPORT_SYMBOL(drm_connector_attach_content_type_property); > + > /** > * drm_create_tv_properties - create TV specific connector properties > * @dev: DRM device > @@ -1260,6 +1307,33 @@ int drm_mode_create_aspect_ratio_property(struct drm_device *dev) > } > EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > > +/** > + * drm_mode_create_content_type_property - create content type property > + * @dev: DRM device > + * > + * Called by a driver the first time it's needed, must be attached to desired > + * connectors. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int drm_mode_create_content_type_property(struct drm_device *dev) > +{ > + if (dev->mode_config.content_type_property) > + return 0; > + > + dev->mode_config.content_type_property = > + drm_property_create_enum(dev, 0, "content type", > + drm_content_type_enum_list, > + ARRAY_SIZE(drm_content_type_enum_list)); > + > + if (dev->mode_config.content_type_property == NULL) > + return -ENOMEM; > + > + return 0; > +} > +EXPORT_SYMBOL(drm_mode_create_content_type_property); Do we really need to export this? Drivers should only call drm_connector_attach_content_type_property() I think ... > + > /** > * drm_mode_create_suggested_offset_properties - create suggests offset properties > * @dev: DRM device > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index 134069f36482..9ecda0b2a4d8 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -4868,6 +4868,14 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, > > frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; > > + /* > + * As some drivers don't support atomic, we can't use connector state. > + * So just initialize the frame with default values, just the same way > + * as it's done with other properties here. > + */ > + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; > + frame->itc = 0; > + > /* > * Populate picture aspect ratio from either > * user input (if specified) or from the CEA mode list. > @@ -4886,6 +4894,53 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, > } > EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode); > > +/** > + * drm_hdmi_get_itc_bit_from_property() - get the HDMI IT content bit > + * from content type property. > + * content_type: Content type DRM property value > + * > + */ > +bool > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type) > +{ > + /* Whenever something else than "No Data", IT Content bit must be set */ > + return content_type != DRM_MODE_CONTENT_TYPE_NO_DATA ? true : false; > +} > +EXPORT_SYMBOL(drm_hdmi_get_itc_bit_from_property); > + > +/** > + * drm_hdmi_get_content_type_from_property() - get the HDMI content type bits > + * from content type property. > + * content_type: Content type DRM property value > + * > + */ > +enum hdmi_content_type > +drm_hdmi_get_content_type_from_property(unsigned int content_type) > +{ > + enum hdmi_content_type ret; > + > + switch (content_type) { > + case DRM_MODE_CONTENT_TYPE_GRAPHICS: > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > + break; > + case DRM_MODE_CONTENT_TYPE_CINEMA: > + ret = HDMI_CONTENT_TYPE_CINEMA; > + break; > + case DRM_MODE_CONTENT_TYPE_GAME: > + ret = HDMI_CONTENT_TYPE_GAME; > + break; > + case DRM_MODE_CONTENT_TYPE_PHOTO: > + ret = HDMI_CONTENT_TYPE_PHOTO; > + break; > + default: > + /* Graphics is the default(0) */ > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > + } > + return ret; > +} > +EXPORT_SYMBOL(drm_hdmi_get_content_type_from_property); > + > + > /** > * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe > * quantization range information > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h > index 675cc3f8cf85..178fa3f3f5f7 100644 > --- a/include/drm/drm_connector.h > +++ b/include/drm/drm_connector.h > @@ -418,6 +418,16 @@ struct drm_connector_state { > */ > enum hdmi_picture_aspect picture_aspect_ratio; > > + > + /** > + * @content_type: Connector property to control the > + * HDMI infoframe content type setting. > + * The %DRM_MODE_CONTENT_TYPE_\* values much > + * match the values. > + */ > + unsigned int content_type; > + > + > /** > * @scaling_mode: Connector property to control the > * upscaling, mostly used for built-in panels. > @@ -1089,11 +1099,13 @@ int drm_mode_create_tv_properties(struct drm_device *dev, > unsigned int num_modes, > const char * const modes[]); > int drm_mode_create_scaling_mode_property(struct drm_device *dev); > +int drm_connector_attach_content_type_property(struct drm_connector *dev); > int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, > u32 scaling_mode_mask); > int drm_connector_attach_content_protection_property( > struct drm_connector *connector); > int drm_mode_create_aspect_ratio_property(struct drm_device *dev); > +int drm_mode_create_content_type_property(struct drm_device *dev); > int drm_mode_create_suggested_offset_properties(struct drm_device *dev); > > int drm_mode_connector_set_path_property(struct drm_connector *connector, > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h > index 8d89a9c3748d..4e264c4d8a9b 100644 > --- a/include/drm/drm_edid.h > +++ b/include/drm/drm_edid.h > @@ -350,6 +350,12 @@ drm_load_edid_firmware(struct drm_connector *connector) > } > #endif > > +bool > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type); > + > +enum hdmi_content_type > +drm_hdmi_get_content_type_from_property(unsigned int content_type); > + > int > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, > const struct drm_display_mode *mode, > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h > index 33b3a96d66d0..fb45839179dd 100644 > --- a/include/drm/drm_mode_config.h > +++ b/include/drm/drm_mode_config.h > @@ -726,6 +726,11 @@ struct drm_mode_config { > * HDMI infoframe aspect ratio setting. > */ > struct drm_property *aspect_ratio_property; > + /** > + * @content_type_property: Optional connector property to control the > + * HDMI infoframe content type setting. > + */ > + struct drm_property *content_type_property; > /** > * @degamma_lut_property: Optional CRTC property to set the LUT used to > * convert the framebuffer's colors to linear gamma. > diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h > index 50bcf4214ff9..cad9e09ffaee 100644 > --- a/include/uapi/drm/drm_mode.h > +++ b/include/uapi/drm/drm_mode.h > @@ -94,6 +94,13 @@ extern "C" { > #define DRM_MODE_PICTURE_ASPECT_4_3 1 > #define DRM_MODE_PICTURE_ASPECT_16_9 2 > > +/* Content type options */ > +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 > +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 > +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 > +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 > +#define DRM_MODE_CONTENT_TYPE_GAME 4 > + > /* Aspect ratio flag bitmask (4 bits 22:19) */ > #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) > #define DRM_MODE_FLAG_PIC_AR_NONE \ > -- > 2.17.0 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Intel-gfx] [PATCH v9 1/2] drm: content-type property for HDMI connector 2018-05-07 14:05 ` [Intel-gfx] " Daniel Vetter @ 2018-05-08 7:18 ` Lisovskiy, Stanislav 2018-05-08 8:01 ` Daniel Vetter 0 siblings, 1 reply; 6+ messages in thread From: Lisovskiy, Stanislav @ 2018-05-08 7:18 UTC (permalink / raw) To: daniel@ffwll.ch Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org On Mon, 2018-05-07 at 16:05 +0200, Daniel Vetter wrote: > On Mon, May 07, 2018 at 04:16:40PM +0300, StanLis wrote: > > From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > > > > Added content_type property to drm_connector_state > > in order to properly handle external HDMI TV content-type setting. > > > > v2: > > * Moved helper function which attaches content type property > > to the drm core, as was suggested. > > Removed redundant connector state initialization. > > > > v3: > > * Removed caps in drm_content_type_enum_list. > > After some discussion it turned out that HDMI Spec 1.4 > > was wrongly assuming that IT Content(itc) bit doesn't affect > > Content type states, however itc bit needs to be manupulated > > as well. In order to not expose additional property for itc, > > for sake of simplicity it was decided to bind those together > > in same "content type" property. > > > > v4: > > * Added it_content checking in > > intel_digital_connector_atomic_check. > > Fixed documentation for new content type enum. > > > > v5: > > * Moved patch revision's description to commit messages. > > > > v6: > > * Minor naming fix for the content type enumeration string. > > > > v7: > > * Fix parameter name for documentation and parameter alignment > > in order not to get warning. Added Content Type description to > > new HDMI connector properties section. > > > > v8: > > * Thrown away unneeded numbers from HDMI content-type property > > description. Switch to strings desription instead of plain > > definitions. > > > > v9: > > * Moved away hdmi specific content-type enum from > > drm_connector_state. Content type property should probably not > > be bound to any specific connector interface in > > drm_connector_state. > > Same probably should be done to hdmi_picture_aspect_ration enum > > which is also contained in drm_connector_state. Added special > > helper function to get derive hdmi specific relevant infoframe > > fields. > > > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > > --- > > Documentation/gpu/drm-kms.rst | 6 +++ > > Documentation/gpu/kms-properties.csv | 1 + > > drivers/gpu/drm/drm_atomic.c | 4 ++ > > drivers/gpu/drm/drm_connector.c | 74 > > ++++++++++++++++++++++++++++ > > drivers/gpu/drm/drm_edid.c | 55 +++++++++++++++++++++ > > include/drm/drm_connector.h | 12 +++++ > > include/drm/drm_edid.h | 6 +++ > > include/drm/drm_mode_config.h | 5 ++ > > include/uapi/drm/drm_mode.h | 7 +++ > > 9 files changed, 170 insertions(+) > > > > diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm- > > kms.rst > > index 1dffd1ac4cd4..e233c2626bd0 100644 > > --- a/Documentation/gpu/drm-kms.rst > > +++ b/Documentation/gpu/drm-kms.rst > > @@ -517,6 +517,12 @@ Standard Connector Properties > > .. kernel-doc:: drivers/gpu/drm/drm_connector.c > > :doc: standard connector properties > > > > +HDMI Specific Connector Properties > > +----------------------------- > > + > > +.. kernel-doc:: drivers/gpu/drm/drm_connector.c > > + :doc: HDMI connector properties > > + > > Plane Composition Properties > > ---------------------------- > > > > diff --git a/Documentation/gpu/kms-properties.csv > > b/Documentation/gpu/kms-properties.csv > > index 07ed22ea3bd6..bfde04eddd14 100644 > > --- a/Documentation/gpu/kms-properties.csv > > +++ b/Documentation/gpu/kms-properties.csv > > @@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property > > Name,Type,Property Values,Object attached,De > > ,Virtual GPU,“suggested X”,RANGE,"Min=0, > > Max=0xffffffff",Connector,property to suggest an X offset for a > > connector > > ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property > > to suggest an Y offset for a connector > > ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" > > }",Connector,TDB > > +,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", > > ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD > > i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", > > ""Limited 16:235"" }",Connector,"When this property is set to > > Limited 16:235 and CTM is set, the hardware will be programmed with > > the result of the multiplication of CTM by the limited range matrix > > to ensure the pixels normaly in the range 0..1.0 are remapped to > > the range 16/255..235/255." > > ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" > > }",Connector,TBD > > ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", > > ""PAL_B"" } etc.",Connector,TBD > > diff --git a/drivers/gpu/drm/drm_atomic.c > > b/drivers/gpu/drm/drm_atomic.c > > index 3d9ae057a6cd..6c1e1e774517 100644 > > --- a/drivers/gpu/drm/drm_atomic.c > > +++ b/drivers/gpu/drm/drm_atomic.c > > @@ -1270,6 +1270,8 @@ static int > > drm_atomic_connector_set_property(struct drm_connector *connector, > > state->link_status = val; > > } else if (property == config->aspect_ratio_property) { > > state->picture_aspect_ratio = val; > > + } else if (property == config->content_type_property) { > > + state->content_type = val; > > } else if (property == connector->scaling_mode_property) { > > state->scaling_mode = val; > > } else if (property == connector- > > >content_protection_property) { > > @@ -1355,6 +1357,8 @@ drm_atomic_connector_get_property(struct > > drm_connector *connector, > > *val = state->link_status; > > } else if (property == config->aspect_ratio_property) { > > *val = state->picture_aspect_ratio; > > + } else if (property == config->content_type_property) { > > + *val = state->content_type; > > } else if (property == connector->scaling_mode_property) { > > *val = state->scaling_mode; > > } else if (property == connector- > > >content_protection_property) { > > diff --git a/drivers/gpu/drm/drm_connector.c > > b/drivers/gpu/drm/drm_connector.c > > index b3cde897cd80..fe63395f159d 100644 > > --- a/drivers/gpu/drm/drm_connector.c > > +++ b/drivers/gpu/drm/drm_connector.c > > @@ -720,6 +720,14 @@ static const struct drm_prop_enum_list > > drm_aspect_ratio_enum_list[] = { > > { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, > > }; > > > > +static const struct drm_prop_enum_list > > drm_content_type_enum_list[] = { > > + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, > > + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, > > + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, > > + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, > > + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, > > +}; > > + > > static const struct drm_prop_enum_list > > drm_panel_orientation_enum_list[] = { > > { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" > > }, > > { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside > > Down" }, > > @@ -996,6 +1004,45 @@ int drm_mode_create_dvi_i_properties(struct > > drm_device *dev) > > } > > EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); > > > > + > > +/** > > + * DOC: HDMI connector properties > > + * > > + * content type (HDMI specific): > > + * Indicates content type setting to be used in HDMI > > infoframes to indicate > > + * content type for the external device, so that it adjusts > > it's display > > + * settings accordingly. > > + * > > + * The value of this property can be one of the following: > > + * > > + * No Data: > > + * Content type is unknown > > + * Graphics: > > + * Content type is graphics > > + * Photo: > > + * Content type is photo > > + * Cinema: > > + * Content type is cinema > > + * Game: > > + * Content type is game > > Links to the function that set up/use the property would be good > here. > I.e. > > "Drivers can set up this property by calling > drm_connector_attach_content_type_property(). Decoding to > infoframe values is done through > drm_hdmi_get_content_type_from_property() and > drm_hdmi_get_itc_bit_from_property()." > > Aside: A simple helper that computes the correct infoframes from the > drm_connector_state and drm_display_info, without forcing drivers to > call > a gazillion individual helper functions would be real nice. But > that's for > someone else I think - all the verbosity here simply annoys me a bit. > > With the above kerneldoc polish: > > Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> > -Daniel Yep, I suggested that, adding some single function could be more proper approach - there is even already a function called drm_hdmi_avi_infoframe_from_display_mode, I initially suggested that it would be convenient to add it there, however as I understood from discussion with Ville, not all drivers support atomic properties, otherwise certainly it would be much easier to have it in a single function. > > + */ > > + > > +/** > > + * drm_connector_attach_content_type_property - attach content- > > type property > > + * @connector: connector to attach content type property on. > > + * > > + * Called by a driver the first time a HDMI connector is made. > > + */ > > +int drm_connector_attach_content_type_property(struct > > drm_connector *connector) > > +{ > > + if (!drm_mode_create_content_type_property(connector- > > >dev)) > > + drm_object_attach_property(&connector->base, > > + connector->dev- > > >mode_config.content_type_property, > > + DRM_MODE_CONTENT_TYPE_N > > O_DATA); > > + return 0; > > +} > > +EXPORT_SYMBOL(drm_connector_attach_content_type_property); > > + > > /** > > * drm_create_tv_properties - create TV specific connector > > properties > > * @dev: DRM device > > @@ -1260,6 +1307,33 @@ int > > drm_mode_create_aspect_ratio_property(struct drm_device *dev) > > } > > EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > > > > +/** > > + * drm_mode_create_content_type_property - create content type > > property > > + * @dev: DRM device > > + * > > + * Called by a driver the first time it's needed, must be attached > > to desired > > + * connectors. > > + * > > + * Returns: > > + * Zero on success, negative errno on failure. > > + */ > > +int drm_mode_create_content_type_property(struct drm_device *dev) > > +{ > > + if (dev->mode_config.content_type_property) > > + return 0; > > + > > + dev->mode_config.content_type_property = > > + drm_property_create_enum(dev, 0, "content type", > > + drm_content_type_enum_lis > > t, > > + ARRAY_SIZE(drm_content_ty > > pe_enum_list)); > > + > > + if (dev->mode_config.content_type_property == NULL) > > + return -ENOMEM; > > + > > + return 0; > > +} > > +EXPORT_SYMBOL(drm_mode_create_content_type_property); > > Do we really need to export this? Drivers should only call > drm_connector_attach_content_type_property() I think ... All of those property creation functions are exported, I was just following those as example: EXPORT_SYMBOL(drm_mode_create_tv_properties); EXPORT_SYMBOL(drm_mode_create_scaling_mode_property); EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); and so on. > > > + > > /** > > * drm_mode_create_suggested_offset_properties - create suggests > > offset properties > > * @dev: DRM device > > diff --git a/drivers/gpu/drm/drm_edid.c > > b/drivers/gpu/drm/drm_edid.c > > index 134069f36482..9ecda0b2a4d8 100644 > > --- a/drivers/gpu/drm/drm_edid.c > > +++ b/drivers/gpu/drm/drm_edid.c > > @@ -4868,6 +4868,14 @@ > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > *frame, > > > > frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; > > > > + /* > > + * As some drivers don't support atomic, we can't use > > connector state. > > + * So just initialize the frame with default values, just > > the same way > > + * as it's done with other properties here. > > + */ > > + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; > > + frame->itc = 0; > > + > > /* > > * Populate picture aspect ratio from either > > * user input (if specified) or from the CEA mode list. > > @@ -4886,6 +4894,53 @@ > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > *frame, > > } > > EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode); > > > > +/** > > + * drm_hdmi_get_itc_bit_from_property() - get the HDMI IT content > > bit > > + * from content type > > property. > > + * content_type: Content type DRM property value > > + * > > + */ > > +bool > > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type) > > +{ > > + /* Whenever something else than "No Data", IT Content bit > > must be set */ > > + return content_type != DRM_MODE_CONTENT_TYPE_NO_DATA ? > > true : false; > > +} > > +EXPORT_SYMBOL(drm_hdmi_get_itc_bit_from_property); > > + > > +/** > > + * drm_hdmi_get_content_type_from_property() - get the HDMI > > content type bits > > + * from content type > > property. > > + * content_type: Content type DRM property value > > + * > > + */ > > +enum hdmi_content_type > > +drm_hdmi_get_content_type_from_property(unsigned int content_type) > > +{ > > + enum hdmi_content_type ret; > > + > > + switch (content_type) { > > + case DRM_MODE_CONTENT_TYPE_GRAPHICS: > > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > > + break; > > + case DRM_MODE_CONTENT_TYPE_CINEMA: > > + ret = HDMI_CONTENT_TYPE_CINEMA; > > + break; > > + case DRM_MODE_CONTENT_TYPE_GAME: > > + ret = HDMI_CONTENT_TYPE_GAME; > > + break; > > + case DRM_MODE_CONTENT_TYPE_PHOTO: > > + ret = HDMI_CONTENT_TYPE_PHOTO; > > + break; > > + default: > > + /* Graphics is the default(0) */ > > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > > + } > > + return ret; > > +} > > +EXPORT_SYMBOL(drm_hdmi_get_content_type_from_property); > > + > > + > > /** > > * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI > > infoframe > > * quantization range > > information > > diff --git a/include/drm/drm_connector.h > > b/include/drm/drm_connector.h > > index 675cc3f8cf85..178fa3f3f5f7 100644 > > --- a/include/drm/drm_connector.h > > +++ b/include/drm/drm_connector.h > > @@ -418,6 +418,16 @@ struct drm_connector_state { > > */ > > enum hdmi_picture_aspect picture_aspect_ratio; > > > > + > > + /** > > + * @content_type: Connector property to control the > > + * HDMI infoframe content type setting. > > + * The %DRM_MODE_CONTENT_TYPE_\* values much > > + * match the values. > > + */ > > + unsigned int content_type; > > + > > + > > /** > > * @scaling_mode: Connector property to control the > > * upscaling, mostly used for built-in panels. > > @@ -1089,11 +1099,13 @@ int drm_mode_create_tv_properties(struct > > drm_device *dev, > > unsigned int num_modes, > > const char * const modes[]); > > int drm_mode_create_scaling_mode_property(struct drm_device *dev); > > +int drm_connector_attach_content_type_property(struct > > drm_connector *dev); > > int drm_connector_attach_scaling_mode_property(struct > > drm_connector *connector, > > u32 > > scaling_mode_mask); > > int drm_connector_attach_content_protection_property( > > struct drm_connector *connector); > > int drm_mode_create_aspect_ratio_property(struct drm_device *dev); > > +int drm_mode_create_content_type_property(struct drm_device *dev); > > int drm_mode_create_suggested_offset_properties(struct drm_device > > *dev); > > > > int drm_mode_connector_set_path_property(struct drm_connector > > *connector, > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h > > index 8d89a9c3748d..4e264c4d8a9b 100644 > > --- a/include/drm/drm_edid.h > > +++ b/include/drm/drm_edid.h > > @@ -350,6 +350,12 @@ drm_load_edid_firmware(struct drm_connector > > *connector) > > } > > #endif > > > > +bool > > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type); > > + > > +enum hdmi_content_type > > +drm_hdmi_get_content_type_from_property(unsigned int > > content_type); > > + > > int > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > *frame, > > const struct > > drm_display_mode *mode, > > diff --git a/include/drm/drm_mode_config.h > > b/include/drm/drm_mode_config.h > > index 33b3a96d66d0..fb45839179dd 100644 > > --- a/include/drm/drm_mode_config.h > > +++ b/include/drm/drm_mode_config.h > > @@ -726,6 +726,11 @@ struct drm_mode_config { > > * HDMI infoframe aspect ratio setting. > > */ > > struct drm_property *aspect_ratio_property; > > + /** > > + * @content_type_property: Optional connector property to > > control the > > + * HDMI infoframe content type setting. > > + */ > > + struct drm_property *content_type_property; > > /** > > * @degamma_lut_property: Optional CRTC property to set > > the LUT used to > > * convert the framebuffer's colors to linear gamma. > > diff --git a/include/uapi/drm/drm_mode.h > > b/include/uapi/drm/drm_mode.h > > index 50bcf4214ff9..cad9e09ffaee 100644 > > --- a/include/uapi/drm/drm_mode.h > > +++ b/include/uapi/drm/drm_mode.h > > @@ -94,6 +94,13 @@ extern "C" { > > #define DRM_MODE_PICTURE_ASPECT_4_3 1 > > #define DRM_MODE_PICTURE_ASPECT_16_9 2 > > > > +/* Content type options */ > > +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 > > +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 > > +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 > > +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 > > +#define DRM_MODE_CONTENT_TYPE_GAME 4 > > + > > /* Aspect ratio flag bitmask (4 bits 22:19) */ > > #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) > > #define DRM_MODE_FLAG_PIC_AR_NONE \ > > -- > > 2.17.0 > > > > _______________________________________________ > > Intel-gfx mailing list > > Intel-gfx@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > -- Best Regards, Lisovskiy Stanislav _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v9 1/2] drm: content-type property for HDMI connector 2018-05-08 7:18 ` Lisovskiy, Stanislav @ 2018-05-08 8:01 ` Daniel Vetter 0 siblings, 0 replies; 6+ messages in thread From: Daniel Vetter @ 2018-05-08 8:01 UTC (permalink / raw) To: Lisovskiy, Stanislav Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org On Tue, May 08, 2018 at 07:18:20AM +0000, Lisovskiy, Stanislav wrote: > On Mon, 2018-05-07 at 16:05 +0200, Daniel Vetter wrote: > > On Mon, May 07, 2018 at 04:16:40PM +0300, StanLis wrote: > > > From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > > > > > > Added content_type property to drm_connector_state > > > in order to properly handle external HDMI TV content-type setting. > > > > > > v2: > > > * Moved helper function which attaches content type property > > > to the drm core, as was suggested. > > > Removed redundant connector state initialization. > > > > > > v3: > > > * Removed caps in drm_content_type_enum_list. > > > After some discussion it turned out that HDMI Spec 1.4 > > > was wrongly assuming that IT Content(itc) bit doesn't affect > > > Content type states, however itc bit needs to be manupulated > > > as well. In order to not expose additional property for itc, > > > for sake of simplicity it was decided to bind those together > > > in same "content type" property. > > > > > > v4: > > > * Added it_content checking in > > > intel_digital_connector_atomic_check. > > > Fixed documentation for new content type enum. > > > > > > v5: > > > * Moved patch revision's description to commit messages. > > > > > > v6: > > > * Minor naming fix for the content type enumeration string. > > > > > > v7: > > > * Fix parameter name for documentation and parameter alignment > > > in order not to get warning. Added Content Type description to > > > new HDMI connector properties section. > > > > > > v8: > > > * Thrown away unneeded numbers from HDMI content-type property > > > description. Switch to strings desription instead of plain > > > definitions. > > > > > > v9: > > > * Moved away hdmi specific content-type enum from > > > drm_connector_state. Content type property should probably not > > > be bound to any specific connector interface in > > > drm_connector_state. > > > Same probably should be done to hdmi_picture_aspect_ration enum > > > which is also contained in drm_connector_state. Added special > > > helper function to get derive hdmi specific relevant infoframe > > > fields. > > > > > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > > > --- > > > Documentation/gpu/drm-kms.rst | 6 +++ > > > Documentation/gpu/kms-properties.csv | 1 + > > > drivers/gpu/drm/drm_atomic.c | 4 ++ > > > drivers/gpu/drm/drm_connector.c | 74 > > > ++++++++++++++++++++++++++++ > > > drivers/gpu/drm/drm_edid.c | 55 +++++++++++++++++++++ > > > include/drm/drm_connector.h | 12 +++++ > > > include/drm/drm_edid.h | 6 +++ > > > include/drm/drm_mode_config.h | 5 ++ > > > include/uapi/drm/drm_mode.h | 7 +++ > > > 9 files changed, 170 insertions(+) > > > > > > diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm- > > > kms.rst > > > index 1dffd1ac4cd4..e233c2626bd0 100644 > > > --- a/Documentation/gpu/drm-kms.rst > > > +++ b/Documentation/gpu/drm-kms.rst > > > @@ -517,6 +517,12 @@ Standard Connector Properties > > > .. kernel-doc:: drivers/gpu/drm/drm_connector.c > > > :doc: standard connector properties > > > > > > +HDMI Specific Connector Properties > > > +----------------------------- > > > + > > > +.. kernel-doc:: drivers/gpu/drm/drm_connector.c > > > + :doc: HDMI connector properties > > > + > > > Plane Composition Properties > > > ---------------------------- > > > > > > diff --git a/Documentation/gpu/kms-properties.csv > > > b/Documentation/gpu/kms-properties.csv > > > index 07ed22ea3bd6..bfde04eddd14 100644 > > > --- a/Documentation/gpu/kms-properties.csv > > > +++ b/Documentation/gpu/kms-properties.csv > > > @@ -17,6 +17,7 @@ Owner Module/Drivers,Group,Property > > > Name,Type,Property Values,Object attached,De > > > ,Virtual GPU,“suggested X”,RANGE,"Min=0, > > > Max=0xffffffff",Connector,property to suggest an X offset for a > > > connector > > > ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property > > > to suggest an Y offset for a connector > > > ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" > > > }",Connector,TDB > > > +,Optional,"""content type""",ENUM,"{ ""No Data"", ""Graphics"", > > > ""Photo"", ""Cinema"", ""Game"" }",Connector,TBD > > > i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", > > > ""Limited 16:235"" }",Connector,"When this property is set to > > > Limited 16:235 and CTM is set, the hardware will be programmed with > > > the result of the multiplication of CTM by the limited range matrix > > > to ensure the pixels normaly in the range 0..1.0 are remapped to > > > the range 16/255..235/255." > > > ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" > > > }",Connector,TBD > > > ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", > > > ""PAL_B"" } etc.",Connector,TBD > > > diff --git a/drivers/gpu/drm/drm_atomic.c > > > b/drivers/gpu/drm/drm_atomic.c > > > index 3d9ae057a6cd..6c1e1e774517 100644 > > > --- a/drivers/gpu/drm/drm_atomic.c > > > +++ b/drivers/gpu/drm/drm_atomic.c > > > @@ -1270,6 +1270,8 @@ static int > > > drm_atomic_connector_set_property(struct drm_connector *connector, > > > state->link_status = val; > > > } else if (property == config->aspect_ratio_property) { > > > state->picture_aspect_ratio = val; > > > + } else if (property == config->content_type_property) { > > > + state->content_type = val; > > > } else if (property == connector->scaling_mode_property) { > > > state->scaling_mode = val; > > > } else if (property == connector- > > > >content_protection_property) { > > > @@ -1355,6 +1357,8 @@ drm_atomic_connector_get_property(struct > > > drm_connector *connector, > > > *val = state->link_status; > > > } else if (property == config->aspect_ratio_property) { > > > *val = state->picture_aspect_ratio; > > > + } else if (property == config->content_type_property) { > > > + *val = state->content_type; > > > } else if (property == connector->scaling_mode_property) { > > > *val = state->scaling_mode; > > > } else if (property == connector- > > > >content_protection_property) { > > > diff --git a/drivers/gpu/drm/drm_connector.c > > > b/drivers/gpu/drm/drm_connector.c > > > index b3cde897cd80..fe63395f159d 100644 > > > --- a/drivers/gpu/drm/drm_connector.c > > > +++ b/drivers/gpu/drm/drm_connector.c > > > @@ -720,6 +720,14 @@ static const struct drm_prop_enum_list > > > drm_aspect_ratio_enum_list[] = { > > > { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, > > > }; > > > > > > +static const struct drm_prop_enum_list > > > drm_content_type_enum_list[] = { > > > + { DRM_MODE_CONTENT_TYPE_NO_DATA, "No Data" }, > > > + { DRM_MODE_CONTENT_TYPE_GRAPHICS, "Graphics" }, > > > + { DRM_MODE_CONTENT_TYPE_PHOTO, "Photo" }, > > > + { DRM_MODE_CONTENT_TYPE_CINEMA, "Cinema" }, > > > + { DRM_MODE_CONTENT_TYPE_GAME, "Game" }, > > > +}; > > > + > > > static const struct drm_prop_enum_list > > > drm_panel_orientation_enum_list[] = { > > > { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" > > > }, > > > { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside > > > Down" }, > > > @@ -996,6 +1004,45 @@ int drm_mode_create_dvi_i_properties(struct > > > drm_device *dev) > > > } > > > EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); > > > > > > + > > > +/** > > > + * DOC: HDMI connector properties > > > + * > > > + * content type (HDMI specific): > > > + * Indicates content type setting to be used in HDMI > > > infoframes to indicate > > > + * content type for the external device, so that it adjusts > > > it's display > > > + * settings accordingly. > > > + * > > > + * The value of this property can be one of the following: > > > + * > > > + * No Data: > > > + * Content type is unknown > > > + * Graphics: > > > + * Content type is graphics > > > + * Photo: > > > + * Content type is photo > > > + * Cinema: > > > + * Content type is cinema > > > + * Game: > > > + * Content type is game > > > > Links to the function that set up/use the property would be good > > here. > > I.e. > > > > "Drivers can set up this property by calling > > drm_connector_attach_content_type_property(). Decoding to > > infoframe values is done through > > drm_hdmi_get_content_type_from_property() and > > drm_hdmi_get_itc_bit_from_property()." > > > > Aside: A simple helper that computes the correct infoframes from the > > drm_connector_state and drm_display_info, without forcing drivers to > > call > > a gazillion individual helper functions would be real nice. But > > that's for > > someone else I think - all the verbosity here simply annoys me a bit. > > > > With the above kerneldoc polish: > > > > Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> > > -Daniel > > Yep, I suggested that, adding some single function could be more proper > approach - there is even already a function called > drm_hdmi_avi_infoframe_from_display_mode, I initially suggested that > it would be convenient to add it there, however as I understood from > discussion with Ville, not all drivers support atomic properties, > otherwise certainly it would be much easier to have it in a single > function. Yes not everything is atomic, but we can pretty much require atomic for new drivers. We'd need to make a new function though which takes drm_connector_state into account (so that non-atomic drivers can keep calling drm_hdmi_avi_infoframe_from_display_mode). For that overall function we'd probably want: drm_hdmi_avi_infoframe_from_state(struct hdmi_avi_infoframe *frame, struct drm_connector_state *conn_state, struct drm_crtc_state *crtc_state); display_info we can get at through conn_state->connector.display_info, and mode we can reach through crtc_state->adjusted_mode. But yeah probably better to do that with the next little hdmi infoframe thing we're going to support, or as a follow-up. -Daniel > > > > + */ > > > + > > > +/** > > > + * drm_connector_attach_content_type_property - attach content- > > > type property > > > + * @connector: connector to attach content type property on. > > > + * > > > + * Called by a driver the first time a HDMI connector is made. > > > + */ > > > +int drm_connector_attach_content_type_property(struct > > > drm_connector *connector) > > > +{ > > > + if (!drm_mode_create_content_type_property(connector- > > > >dev)) > > > + drm_object_attach_property(&connector->base, > > > + connector->dev- > > > >mode_config.content_type_property, > > > + DRM_MODE_CONTENT_TYPE_N > > > O_DATA); > > > + return 0; > > > +} > > > +EXPORT_SYMBOL(drm_connector_attach_content_type_property); > > > + > > > /** > > > * drm_create_tv_properties - create TV specific connector > > > properties > > > * @dev: DRM device > > > @@ -1260,6 +1307,33 @@ int > > > drm_mode_create_aspect_ratio_property(struct drm_device *dev) > > > } > > > EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > > > > > > +/** > > > + * drm_mode_create_content_type_property - create content type > > > property > > > + * @dev: DRM device > > > + * > > > + * Called by a driver the first time it's needed, must be attached > > > to desired > > > + * connectors. > > > + * > > > + * Returns: > > > + * Zero on success, negative errno on failure. > > > + */ > > > +int drm_mode_create_content_type_property(struct drm_device *dev) > > > +{ > > > + if (dev->mode_config.content_type_property) > > > + return 0; > > > + > > > + dev->mode_config.content_type_property = > > > + drm_property_create_enum(dev, 0, "content type", > > > + drm_content_type_enum_lis > > > t, > > > + ARRAY_SIZE(drm_content_ty > > > pe_enum_list)); > > > + > > > + if (dev->mode_config.content_type_property == NULL) > > > + return -ENOMEM; > > > + > > > + return 0; > > > +} > > > +EXPORT_SYMBOL(drm_mode_create_content_type_property); > > > > Do we really need to export this? Drivers should only call > > drm_connector_attach_content_type_property() I think ... > > All of those property creation functions are exported, I was > just following those as example: > > EXPORT_SYMBOL(drm_mode_create_tv_properties); > EXPORT_SYMBOL(drm_mode_create_scaling_mode_property); > EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > > and so on. > > > > > > + > > > /** > > > * drm_mode_create_suggested_offset_properties - create suggests > > > offset properties > > > * @dev: DRM device > > > diff --git a/drivers/gpu/drm/drm_edid.c > > > b/drivers/gpu/drm/drm_edid.c > > > index 134069f36482..9ecda0b2a4d8 100644 > > > --- a/drivers/gpu/drm/drm_edid.c > > > +++ b/drivers/gpu/drm/drm_edid.c > > > @@ -4868,6 +4868,14 @@ > > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > > *frame, > > > > > > frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; > > > > > > + /* > > > + * As some drivers don't support atomic, we can't use > > > connector state. > > > + * So just initialize the frame with default values, just > > > the same way > > > + * as it's done with other properties here. > > > + */ > > > + frame->content_type = HDMI_CONTENT_TYPE_GRAPHICS; > > > + frame->itc = 0; > > > + > > > /* > > > * Populate picture aspect ratio from either > > > * user input (if specified) or from the CEA mode list. > > > @@ -4886,6 +4894,53 @@ > > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > > *frame, > > > } > > > EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode); > > > > > > +/** > > > + * drm_hdmi_get_itc_bit_from_property() - get the HDMI IT content > > > bit > > > + * from content type > > > property. > > > + * content_type: Content type DRM property value > > > + * > > > + */ > > > +bool > > > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type) > > > +{ > > > + /* Whenever something else than "No Data", IT Content bit > > > must be set */ > > > + return content_type != DRM_MODE_CONTENT_TYPE_NO_DATA ? > > > true : false; > > > +} > > > +EXPORT_SYMBOL(drm_hdmi_get_itc_bit_from_property); > > > + > > > +/** > > > + * drm_hdmi_get_content_type_from_property() - get the HDMI > > > content type bits > > > + * from content type > > > property. > > > + * content_type: Content type DRM property value > > > + * > > > + */ > > > +enum hdmi_content_type > > > +drm_hdmi_get_content_type_from_property(unsigned int content_type) > > > +{ > > > + enum hdmi_content_type ret; > > > + > > > + switch (content_type) { > > > + case DRM_MODE_CONTENT_TYPE_GRAPHICS: > > > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > > > + break; > > > + case DRM_MODE_CONTENT_TYPE_CINEMA: > > > + ret = HDMI_CONTENT_TYPE_CINEMA; > > > + break; > > > + case DRM_MODE_CONTENT_TYPE_GAME: > > > + ret = HDMI_CONTENT_TYPE_GAME; > > > + break; > > > + case DRM_MODE_CONTENT_TYPE_PHOTO: > > > + ret = HDMI_CONTENT_TYPE_PHOTO; > > > + break; > > > + default: > > > + /* Graphics is the default(0) */ > > > + ret = HDMI_CONTENT_TYPE_GRAPHICS; > > > + } > > > + return ret; > > > +} > > > +EXPORT_SYMBOL(drm_hdmi_get_content_type_from_property); > > > + > > > + > > > /** > > > * drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI > > > infoframe > > > * quantization range > > > information > > > diff --git a/include/drm/drm_connector.h > > > b/include/drm/drm_connector.h > > > index 675cc3f8cf85..178fa3f3f5f7 100644 > > > --- a/include/drm/drm_connector.h > > > +++ b/include/drm/drm_connector.h > > > @@ -418,6 +418,16 @@ struct drm_connector_state { > > > */ > > > enum hdmi_picture_aspect picture_aspect_ratio; > > > > > > + > > > + /** > > > + * @content_type: Connector property to control the > > > + * HDMI infoframe content type setting. > > > + * The %DRM_MODE_CONTENT_TYPE_\* values much > > > + * match the values. > > > + */ > > > + unsigned int content_type; > > > + > > > + > > > /** > > > * @scaling_mode: Connector property to control the > > > * upscaling, mostly used for built-in panels. > > > @@ -1089,11 +1099,13 @@ int drm_mode_create_tv_properties(struct > > > drm_device *dev, > > > unsigned int num_modes, > > > const char * const modes[]); > > > int drm_mode_create_scaling_mode_property(struct drm_device *dev); > > > +int drm_connector_attach_content_type_property(struct > > > drm_connector *dev); > > > int drm_connector_attach_scaling_mode_property(struct > > > drm_connector *connector, > > > u32 > > > scaling_mode_mask); > > > int drm_connector_attach_content_protection_property( > > > struct drm_connector *connector); > > > int drm_mode_create_aspect_ratio_property(struct drm_device *dev); > > > +int drm_mode_create_content_type_property(struct drm_device *dev); > > > int drm_mode_create_suggested_offset_properties(struct drm_device > > > *dev); > > > > > > int drm_mode_connector_set_path_property(struct drm_connector > > > *connector, > > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h > > > index 8d89a9c3748d..4e264c4d8a9b 100644 > > > --- a/include/drm/drm_edid.h > > > +++ b/include/drm/drm_edid.h > > > @@ -350,6 +350,12 @@ drm_load_edid_firmware(struct drm_connector > > > *connector) > > > } > > > #endif > > > > > > +bool > > > +drm_hdmi_get_itc_bit_from_property(unsigned int content_type); > > > + > > > +enum hdmi_content_type > > > +drm_hdmi_get_content_type_from_property(unsigned int > > > content_type); > > > + > > > int > > > drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe > > > *frame, > > > const struct > > > drm_display_mode *mode, > > > diff --git a/include/drm/drm_mode_config.h > > > b/include/drm/drm_mode_config.h > > > index 33b3a96d66d0..fb45839179dd 100644 > > > --- a/include/drm/drm_mode_config.h > > > +++ b/include/drm/drm_mode_config.h > > > @@ -726,6 +726,11 @@ struct drm_mode_config { > > > * HDMI infoframe aspect ratio setting. > > > */ > > > struct drm_property *aspect_ratio_property; > > > + /** > > > + * @content_type_property: Optional connector property to > > > control the > > > + * HDMI infoframe content type setting. > > > + */ > > > + struct drm_property *content_type_property; > > > /** > > > * @degamma_lut_property: Optional CRTC property to set > > > the LUT used to > > > * convert the framebuffer's colors to linear gamma. > > > diff --git a/include/uapi/drm/drm_mode.h > > > b/include/uapi/drm/drm_mode.h > > > index 50bcf4214ff9..cad9e09ffaee 100644 > > > --- a/include/uapi/drm/drm_mode.h > > > +++ b/include/uapi/drm/drm_mode.h > > > @@ -94,6 +94,13 @@ extern "C" { > > > #define DRM_MODE_PICTURE_ASPECT_4_3 1 > > > #define DRM_MODE_PICTURE_ASPECT_16_9 2 > > > > > > +/* Content type options */ > > > +#define DRM_MODE_CONTENT_TYPE_NO_DATA 0 > > > +#define DRM_MODE_CONTENT_TYPE_GRAPHICS 1 > > > +#define DRM_MODE_CONTENT_TYPE_PHOTO 2 > > > +#define DRM_MODE_CONTENT_TYPE_CINEMA 3 > > > +#define DRM_MODE_CONTENT_TYPE_GAME 4 > > > + > > > /* Aspect ratio flag bitmask (4 bits 22:19) */ > > > #define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19) > > > #define DRM_MODE_FLAG_PIC_AR_NONE \ > > > -- > > > 2.17.0 > > > > > > _______________________________________________ > > > Intel-gfx mailing list > > > Intel-gfx@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > > > > -- > Best Regards, > > Lisovskiy Stanislav -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v9 2/2] i915: content-type property for HDMI connector 2018-05-07 13:16 [PATCH v9 0/2] Enabling content-type setting for HDMI displays StanLis 2018-05-07 13:16 ` [PATCH v9 1/2] drm: content-type property for HDMI connector StanLis @ 2018-05-07 13:16 ` StanLis 1 sibling, 0 replies; 6+ messages in thread From: StanLis @ 2018-05-07 13:16 UTC (permalink / raw) To: dri-devel; +Cc: intel-gfx From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> --- drivers/gpu/drm/i915/intel_atomic.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 24 ++++++++++++++++++------ 2 files changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c index 40285d1b91b7..61ddb5871d8a 100644 --- a/drivers/gpu/drm/i915/intel_atomic.c +++ b/drivers/gpu/drm/i915/intel_atomic.c @@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn, if (new_conn_state->force_audio != old_conn_state->force_audio || new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb || new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio || + new_conn_state->base.content_type != old_conn_state->base.content_type || new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode) crtc_state->mode_changed = true; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index ee929f31f7db..1080254a578b 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -460,8 +460,10 @@ static void intel_write_infoframe(struct drm_encoder *encoder, intel_dig_port->write_infoframe(encoder, crtc_state, frame->any.type, buffer, len); } + static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, - const struct intel_crtc_state *crtc_state) + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); const struct drm_display_mode *adjusted_mode = @@ -469,6 +471,8 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, struct drm_connector *connector = &intel_hdmi->attached_connector->base; bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported; union hdmi_infoframe frame; + enum hdmi_content_type content_type; + bool itc; int ret; ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, @@ -491,6 +495,13 @@ static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder, intel_hdmi->rgb_quant_range_selectable, is_hdmi2_sink); + /* convert generic content type property to HDMI specific */ + itc = drm_hdmi_get_itc_bit_from_property(conn_state->content_type); + content_type = drm_hdmi_get_content_type_from_property(conn_state->content_type); + + frame.avi.itc = itc; + frame.avi.content_type = content_type; + /* TODO: handle pixel repetition for YCBCR420 outputs */ intel_write_infoframe(encoder, crtc_state, &frame); } @@ -586,7 +597,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -727,7 +738,7 @@ static void ibx_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -770,7 +781,7 @@ static void cpt_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -823,7 +834,7 @@ static void vlv_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -856,7 +867,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder, I915_WRITE(reg, val); POSTING_READ(reg); - intel_hdmi_set_avi_infoframe(encoder, crtc_state); + intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state); intel_hdmi_set_spd_infoframe(encoder, crtc_state); intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state); } @@ -2065,6 +2076,7 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_attach_force_audio_property(connector); intel_attach_broadcast_rgb_property(connector); intel_attach_aspect_ratio_property(connector); + drm_connector_attach_content_type_property(connector); connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } -- 2.17.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-05-08 8:01 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-05-07 13:16 [PATCH v9 0/2] Enabling content-type setting for HDMI displays StanLis 2018-05-07 13:16 ` [PATCH v9 1/2] drm: content-type property for HDMI connector StanLis 2018-05-07 14:05 ` [Intel-gfx] " Daniel Vetter 2018-05-08 7:18 ` Lisovskiy, Stanislav 2018-05-08 8:01 ` Daniel Vetter 2018-05-07 13:16 ` [PATCH v9 2/2] i915: " StanLis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox