dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Hans de Goede <j.w.r.degoede@gmail.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>,
	Hans de Goede <hdegoede@redhat.com>,
	dri-devel@lists.freedesktop.org,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: Re: [PATCH] drm/i915/intel_dsi: Add acpi_gpio_mapping for the panel-enable GPIO
Date: Fri, 29 Jun 2018 14:51:38 +0300	[thread overview]
Message-ID: <20180629115138.GA5565@intel.com> (raw)
In-Reply-To: <20180629113258.16188-1-hdegoede@redhat.com>

On Fri, Jun 29, 2018 at 01:32:58PM +0200, Hans de Goede wrote:
> Add acpi_gpio_mapping for the panel-enable GPIO, this fixes the following
> error: "Failed to own gpio for panel control" on BYT/CHT devices where
> pwm_blc == PPS_BLC_PMIC.
> 
> Note this patch is untested as I don't have hardware to test this,
> but it should fix things.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 3b7acb5a70b3..b2b75ed3cbf9 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -29,6 +29,7 @@
>  #include <drm/drm_edid.h>
>  #include <drm/i915_drm.h>
>  #include <drm/drm_mipi_dsi.h>
> +#include <linux/acpi.h>
>  #include <linux/slab.h>
>  #include <linux/gpio/consumer.h>
>  #include "i915_drv.h"
> @@ -1713,6 +1714,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
>  	}
>  }
>  
> +static const struct acpi_gpio_params panel_gpio = { 0, 0, false };
> +
> +static const struct acpi_gpio_mapping panel_gpios[] = {
> +	{ "panel", &panel_gpio, 1 },
> +	{ },
> +};

Named initializers please.

> +
>  void intel_dsi_init(struct drm_i915_private *dev_priv)
>  {
>  	struct drm_device *dev = &dev_priv->drm;
> @@ -1811,6 +1819,7 @@ void intel_dsi_init(struct drm_i915_private *dev_priv)
>  	 */
>  	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
>  	    (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) {
> +		devm_acpi_dev_add_driver_gpios(dev->dev, panel_gpios);

Some explanation on what this actually does would be nice. There is no
documentation that I can see so it's totally unclear why this is needed.

Also IIRC this gpio comes straight from the pmic driver and not from
acpi. So I don't really understand why acpi stuff must be involved here.

ccing Andy for a clue...

>  		intel_dsi->gpio_panel =
>  			gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
>  
> -- 
> 2.17.1

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-06-29 11:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29 11:32 [PATCH] drm/i915/intel_dsi: Add acpi_gpio_mapping for the panel-enable GPIO Hans de Goede
2018-06-29 11:51 ` Ville Syrjälä [this message]
2018-06-29 12:05   ` Hans de Goede
2018-06-29 12:10     ` Ville Syrjälä
2018-06-29 12:28       ` Hans de Goede
2018-06-29 16:12   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180629115138.GA5565@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=j.w.r.degoede@gmail.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox