From: Manasi Navare <manasi.d.navare@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v7 00/19] DSC enabling remaining patches
Date: Fri, 2 Nov 2018 12:51:17 -0700 [thread overview]
Message-ID: <20181102195117.GL3481@intel.com> (raw)
In-Reply-To: <20181102180604.GA9144@intel.com>
Thanks Ville for this detailed review. I will spin this now
with the required fixes and send it over.
Manasi
On Fri, Nov 02, 2018 at 08:06:04PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 01, 2018 at 11:46:40PM -0700, Manasi Navare wrote:
> > This patch series addresses review comments on previous DSC series:
> >
> > https://patchwork.freedesktop.org/series/47514/
> >
> > Gaurav K Singh (3):
> > drm/i915/dsc: Define & Compute VESA DSC params
> > drm/i915/dsc: Compute Rate Control parameters for DSC
> > drm/i915/dp: Enable/Disable DSC in DP Sink
> >
> > Manasi Navare (15):
> > drm/dsc: Define Display Stream Compression PPS infoframe
> > drm/dsc: Define VESA Display Stream Compression Capabilities
> > drm/dsc: Add helpers for DSC picture parameter set infoframes
> > drm/i915/dp: Add DSC params and DSC config to intel_crtc_state
> > drm/i915/dp: Compute DSC pipe config in atomic check
> > drm/i915/dp: Do not enable PSR2 if DSC is enabled
> > drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants
> > drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI
> > drm/i915/dp: Configure i915 Picture parameter Set registers during DSC
> > enabling
> > drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs
> > drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes
> > drm/i915/dp: Configure Display stream splitter registers during DSC
> > enable
> > drm/i915/dp: Disable DSC in source by disabling DSS CTL bits
> > drm/i915/dsc: Enable and disable appropriate power wells for VDSC
> > drm/i915/dsc: Add Per connector debugfs node for DSC support/enable
> >
> > Srivatsa, Anusha (1):
> > drm/dsc: Define Rate Control values that do not change over
> > configurations
>
> I think we have these real functional issues left:
> - no FEC so should reject DSC on external DP
> - get_power_domains() thing wasn't right
>
> The potentially user triggerable DRM_ERROR()s have to be
> removed or explained why they can't happen (in which case
> a WARN() would probably be a more clear hint to the reader).
>
> The intel_dsc_enable() call I definitely would like see
> moved into the encoder->per_enable(). No one will think to
> look for it in the current location.
>
> The i915_modparams.enable_psr change seemed unrelated, but
> no idea if it's intentional or not.
>
> And finally there were various style nits that are optional.
> But I would recomment doing them since it's trivial stuff and
> avoids further churn in the code later.
>
> I think that's about it really.
>
> >
> > Documentation/gpu/drm-kms-helpers.rst | 12 +
> > drivers/gpu/drm/Makefile | 2 +-
> > drivers/gpu/drm/drm_dsc.c | 228 +++++
> > drivers/gpu/drm/i915/Makefile | 3 +-
> > drivers/gpu/drm/i915/i915_debugfs.c | 71 +-
> > drivers/gpu/drm/i915/i915_drv.h | 4 +
> > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > drivers/gpu/drm/i915/intel_ddi.c | 8 +-
> > drivers/gpu/drm/i915/intel_display.c | 28 +-
> > drivers/gpu/drm/i915/intel_display.h | 4 +-
> > drivers/gpu/drm/i915/intel_dp.c | 196 +++-
> > drivers/gpu/drm/i915/intel_dp_mst.c | 2 +-
> > drivers/gpu/drm/i915/intel_drv.h | 21 +
> > drivers/gpu/drm/i915/intel_hdmi.c | 21 +-
> > drivers/gpu/drm/i915/intel_psr.c | 16 +-
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +-
> > drivers/gpu/drm/i915/intel_vdsc.c | 1100 +++++++++++++++++++++++
> > include/drm/drm_dp_helper.h | 3 +
> > include/drm/drm_dsc.h | 485 ++++++++++
> > 19 files changed, 2169 insertions(+), 40 deletions(-)
> > create mode 100644 drivers/gpu/drm/drm_dsc.c
> > create mode 100644 drivers/gpu/drm/i915/intel_vdsc.c
> > create mode 100644 include/drm/drm_dsc.h
> >
> > --
> > 2.18.0
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2018-11-02 19:51 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 6:46 [PATCH v7 00/19] DSC enabling remaining patches Manasi Navare
2018-11-02 6:46 ` [PATCH v7 01/19] drm/dsc: Define Display Stream Compression PPS infoframe Manasi Navare
2018-11-02 6:46 ` [PATCH v7 02/19] drm/dsc: Define VESA Display Stream Compression Capabilities Manasi Navare
2018-11-02 6:46 ` [PATCH v7 03/19] drm/dsc: Define Rate Control values that do not change over configurations Manasi Navare
2018-11-02 6:46 ` [PATCH v7 04/19] drm/dsc: Add helpers for DSC picture parameter set infoframes Manasi Navare
2018-11-02 6:46 ` [PATCH v7 05/19] drm/i915/dp: Add DSC params and DSC config to intel_crtc_state Manasi Navare
2018-11-02 6:46 ` [PATCH v7 06/19] drm/i915/dp: Compute DSC pipe config in atomic check Manasi Navare
2018-11-02 17:51 ` Ville Syrjälä
2018-11-02 6:46 ` [PATCH v7 07/19] drm/i915/dp: Do not enable PSR2 if DSC is enabled Manasi Navare
2018-11-02 17:51 ` Ville Syrjälä
2018-11-02 20:35 ` Manasi Navare
2018-11-02 6:46 ` [PATCH v7 08/19] drm/dsc: Define the DSC 1.1 and 1.2 Line Buffer depth constants Manasi Navare
2018-11-02 6:46 ` [PATCH v7 09/19] drm/i915/dsc: Define & Compute VESA DSC params Manasi Navare
2018-11-02 17:51 ` Ville Syrjälä
2018-11-02 6:46 ` [PATCH v7 10/19] drm/i915/dsc: Compute Rate Control parameters for DSC Manasi Navare
2018-11-02 17:52 ` Ville Syrjälä
2018-11-02 6:46 ` [PATCH v7 11/19] drm/i915/dp: Enable/Disable DSC in DP Sink Manasi Navare
2018-11-02 6:46 ` [PATCH v7 12/19] drm/i915/dsc: Add a power domain for VDSC on eDP/MIPI DSI Manasi Navare
2018-11-02 6:46 ` [PATCH v7 13/19] drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling Manasi Navare
2018-11-02 17:52 ` Ville Syrjälä
2018-11-02 21:07 ` Manasi Navare
2018-11-02 6:46 ` [PATCH v7 14/19] drm/i915/dp: Use the existing write_infoframe() for DSC PPS SDPs Manasi Navare
2018-11-02 6:46 ` [PATCH v7 15/19] drm/i915/dp: Populate DSC PPS SDP and send PPS infoframes Manasi Navare
2018-11-02 6:46 ` [PATCH v7 16/19] drm/i915/dp: Configure Display stream splitter registers during DSC enable Manasi Navare
2018-11-02 6:46 ` [PATCH v7 17/19] drm/i915/dp: Disable DSC in source by disabling DSS CTL bits Manasi Navare
2018-11-02 6:46 ` [PATCH v7 18/19] drm/i915/dsc: Enable and disable appropriate power wells for VDSC Manasi Navare
2018-11-02 17:53 ` Ville Syrjälä
2018-11-02 6:46 ` [PATCH v7 19/19] drm/i915/dsc: Add Per connector debugfs node for DSC support/enable Manasi Navare
2018-11-02 18:06 ` [PATCH v7 00/19] DSC enabling remaining patches Ville Syrjälä
2018-11-02 19:51 ` Manasi Navare [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102195117.GL3481@intel.com \
--to=manasi.d.navare@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox