[PATCH AUTOSEL 4.14 39/69] drm/meson: add support for 1080p25 mode

[PATCH AUTOSEL 4.14 39/69] drm/meson: add support for 1080p25 mode

[Sasha Levin]

From: Christian Hewitt <christianshewitt@gmail.com>

[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]

This essential mode for PAL users is missing, so add it.

Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_venc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 9509017dbded..d5dfe7045cc6 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -714,6 +714,7 @@ struct meson_hdmi_venc_vic_mode {
 	{ 5, &meson_hdmi_encp_mode_1080i60 },
 	{ 20, &meson_hdmi_encp_mode_1080i50 },
 	{ 32, &meson_hdmi_encp_mode_1080p24 },
+	{ 33, &meson_hdmi_encp_mode_1080p50 },
 	{ 34, &meson_hdmi_encp_mode_1080p30 },
 	{ 31, &meson_hdmi_encp_mode_1080p50 },
 	{ 16, &meson_hdmi_encp_mode_1080p60 },
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.14 53/69] drm/amdgpu: Add delay after enable RLC ucode

[Sasha Levin]

From: shaoyunl <shaoyun.liu@amd.com>

[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]

Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 3981915e2311..b2eecfc9042e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1992,12 +1992,13 @@ static void gfx_v9_0_rlc_start(struct amdgpu_device *adev)
 #endif
 
 	WREG32_FIELD15(GC, 0, RLC_CNTL, RLC_ENABLE_F32, 1);
+	udelay(50);
 
 	/* carrizo do enable cp interrupt after cp inited */
-	if (!(adev->flags & AMD_IS_APU))
+	if (!(adev->flags & AMD_IS_APU)) {
 		gfx_v9_0_enable_gui_idle_interrupt(adev, true);
-
-	udelay(50);
+		udelay(50);
+	}
 
 #ifdef AMDGPU_RLC_DEBUG_RETRY
 	/* RLC_GPM_GENERAL_6 : RLC Ucode version */
-- 
2.17.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.14 54/69] drm/ast: fixed reading monitor EDID not stable issue

[Sasha Levin]

From: "Y.C. Chen" <yc_chen@aspeedtech.com>

[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]

v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ast/ast_mode.c | 36 ++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index fae1176b2472..343867b182dd 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv)
 {
 	struct ast_i2c_chan *i2c = i2c_priv;
 	struct ast_private *ast = i2c->dev->dev_private;
-	uint32_t val;
+	uint32_t val, val2, count, pass;
+
+	count = 0;
+	pass = 0;
+	val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+	do {
+		val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+		if (val == val2) {
+			pass++;
+		} else {
+			pass = 0;
+			val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+		}
+	} while ((pass < 5) && (count++ < 0x10000));
 
-	val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4;
 	return val & 1 ? 1 : 0;
 }
 
@@ -983,9 +995,21 @@ static int get_data(void *i2c_priv)
 {
 	struct ast_i2c_chan *i2c = i2c_priv;
 	struct ast_private *ast = i2c->dev->dev_private;
-	uint32_t val;
+	uint32_t val, val2, count, pass;
+
+	count = 0;
+	pass = 0;
+	val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+	do {
+		val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+		if (val == val2) {
+			pass++;
+		} else {
+			pass = 0;
+			val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+		}
+	} while ((pass < 5) && (count++ < 0x10000));
 
-	val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5;
 	return val & 1 ? 1 : 0;
 }
 
@@ -998,7 +1022,7 @@ static void set_clock(void *i2c_priv, int clock)
 
 	for (i = 0; i < 0x10000; i++) {
 		ujcrb7 = ((clock & 0x01) ? 0 : 1);
-		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, ujcrb7);
 		jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01);
 		if (ujcrb7 == jtemp)
 			break;
@@ -1014,7 +1038,7 @@ static void set_data(void *i2c_priv, int data)
 
 	for (i = 0; i < 0x10000; i++) {
 		ujcrb7 = ((data & 0x01) ? 0 : 1) << 2;
-		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7);
+		ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, ujcrb7);
 		jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04);
 		if (ujcrb7 == jtemp)
 			break;
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel