* [PATCH v3 01/50] drm/atomic: Constify mode argument to mode_valid_path()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 02/50] drm/omap: dsi: Fix crash in DSI debug dumps Laurent Pinchart
` (48 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The mode_valid_path() function validates the mode it receives without
ever modifying it. Constify the mode pointer argument to make that
explicit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/drm_atomic_helper.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 6fe2303fccd9..3a746a9a16fb 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -488,7 +488,7 @@ mode_fixup(struct drm_atomic_state *state)
static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
struct drm_encoder *encoder,
struct drm_crtc *crtc,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
enum drm_mode_status ret;
@@ -527,7 +527,7 @@ mode_valid(struct drm_atomic_state *state)
struct drm_crtc *crtc = conn_state->crtc;
struct drm_crtc_state *crtc_state;
enum drm_mode_status mode_status;
- struct drm_display_mode *mode;
+ const struct drm_display_mode *mode;
if (!crtc || !encoder)
continue;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 02/50] drm/omap: dsi: Fix crash in DSI debug dumps
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 01/50] drm/atomic: Constify mode argument to mode_valid_path() Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 03/50] drm/omap: dsi: Fix OF platform depopulate Laurent Pinchart
` (47 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes: f3ed97f9ae7d ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 00a9c2ab9e6c..277f9dd2ec8c 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -1406,7 +1406,7 @@ static void dsi_pll_disable(struct dss_pll *pll)
static int dsi_dump_dsi_clocks(struct seq_file *s, void *p)
{
- struct dsi_data *dsi = p;
+ struct dsi_data *dsi = s->private;
struct dss_pll_clock_info *cinfo = &dsi->pll.cinfo;
enum dss_clk_source dispc_clk_src, dsi_clk_src;
int dsi_module = dsi->module_id;
@@ -1467,7 +1467,7 @@ static int dsi_dump_dsi_clocks(struct seq_file *s, void *p)
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
{
- struct dsi_data *dsi = p;
+ struct dsi_data *dsi = s->private;
unsigned long flags;
struct dsi_irq_stats stats;
@@ -1558,7 +1558,7 @@ static int dsi_dump_dsi_irqs(struct seq_file *s, void *p)
static int dsi_dump_dsi_regs(struct seq_file *s, void *p)
{
- struct dsi_data *dsi = p;
+ struct dsi_data *dsi = s->private;
if (dsi_runtime_get(dsi))
return 0;
@@ -5083,15 +5083,15 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
snprintf(name, sizeof(name), "dsi%u_regs", dsi->module_id + 1);
dsi->debugfs.regs = dss_debugfs_create_file(dss, name,
- dsi_dump_dsi_regs, &dsi);
+ dsi_dump_dsi_regs, dsi);
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
snprintf(name, sizeof(name), "dsi%u_irqs", dsi->module_id + 1);
dsi->debugfs.irqs = dss_debugfs_create_file(dss, name,
- dsi_dump_dsi_irqs, &dsi);
+ dsi_dump_dsi_irqs, dsi);
#endif
snprintf(name, sizeof(name), "dsi%u_clks", dsi->module_id + 1);
dsi->debugfs.clks = dss_debugfs_create_file(dss, name,
- dsi_dump_dsi_clocks, &dsi);
+ dsi_dump_dsi_clocks, dsi);
return 0;
}
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 03/50] drm/omap: dsi: Fix OF platform depopulate
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 01/50] drm/atomic: Constify mode argument to mode_valid_path() Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 02/50] drm/omap: dsi: Fix crash in DSI debug dumps Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 04/50] drm/omap: dsi: Hack-fix DSI bus flags Laurent Pinchart
` (46 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Commit edb715dffdee ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 277f9dd2ec8c..b5685018d830 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -5104,8 +5104,6 @@ static void dsi_unbind(struct device *dev, struct device *master, void *data)
dss_debugfs_remove_file(dsi->debugfs.irqs);
dss_debugfs_remove_file(dsi->debugfs.regs);
- of_platform_depopulate(dev);
-
WARN_ON(dsi->scp_clk_refcount > 0);
dss_pll_unregister(&dsi->pll);
@@ -5457,6 +5455,8 @@ static int dsi_remove(struct platform_device *pdev)
dsi_uninit_output(dsi);
+ of_platform_depopulate(&pdev->dev);
+
pm_runtime_disable(&pdev->dev);
if (dsi->vdds_dsi_reg != NULL && dsi->vdds_dsi_enabled) {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 04/50] drm/omap: dsi: Hack-fix DSI bus flags
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (2 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 03/50] drm/omap: dsi: Fix OF platform depopulate Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 05/50] drm/omap: Remove declaration of nonexisting function Laurent Pinchart
` (45 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Since commit b4935e3a3cfa ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3cfa ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dsi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index b5685018d830..64fb788b6647 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -4751,6 +4751,17 @@ static int dsi_set_config(struct omap_dss_device *dssdev,
dsi->vm.flags |= DISPLAY_FLAGS_HSYNC_HIGH;
dsi->vm.flags &= ~DISPLAY_FLAGS_VSYNC_LOW;
dsi->vm.flags |= DISPLAY_FLAGS_VSYNC_HIGH;
+ /*
+ * HACK: These flags should be handled through the omap_dss_device bus
+ * flags, but this will only be possible when the DSI encoder will be
+ * converted to the omapdrm-managed encoder model.
+ */
+ dsi->vm.flags &= ~DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+ dsi->vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
+ dsi->vm.flags &= ~DISPLAY_FLAGS_DE_LOW;
+ dsi->vm.flags |= DISPLAY_FLAGS_DE_HIGH;
+ dsi->vm.flags &= ~DISPLAY_FLAGS_SYNC_POSEDGE;
+ dsi->vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
dss_mgr_set_timings(&dsi->output, &dsi->vm);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 05/50] drm/omap: Remove declaration of nonexisting function
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (3 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 04/50] drm/omap: dsi: Hack-fix DSI bus flags Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 06/50] drm/omap: Remove unused kobj field from struct omap_dss_device Laurent Pinchart
` (44 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omap_connector_attached_encoder() doesn't exist anymore, remove its
declaration from omap_connector.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/gpu/drm/omapdrm/omap_connector.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.h b/drivers/gpu/drm/omapdrm/omap_connector.h
index 854099801649..4a1dcd0f031b 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.h
+++ b/drivers/gpu/drm/omapdrm/omap_connector.h
@@ -31,8 +31,6 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
struct omap_dss_device *output,
struct omap_dss_device *display,
struct drm_encoder *encoder);
-struct drm_encoder *omap_connector_attached_encoder(
- struct drm_connector *connector);
bool omap_connector_get_hdmi_mode(struct drm_connector *connector);
void omap_connector_enable_hpd(struct drm_connector *connector);
void omap_connector_disable_hpd(struct drm_connector *connector);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 06/50] drm/omap: Remove unused kobj field from struct omap_dss_device
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (4 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 05/50] drm/omap: Remove declaration of nonexisting function Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 07/50] drm/omap: venc: Remove wss_data field from venc_device structure Laurent Pinchart
` (43 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The kobj field from struct omap_dss_device is not used. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/gpu/drm/omapdrm/dss/omapdss.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 33e15cb77efa..3b4bf5c47173 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -19,7 +19,6 @@
#define __OMAP_DRM_DSS_H
#include <linux/list.h>
-#include <linux/kobject.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <video/videomode.h>
@@ -404,7 +403,6 @@ enum omap_dss_device_type {
};
struct omap_dss_device {
- struct kobject kobj;
struct device *dev;
struct module *owner;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 07/50] drm/omap: venc: Remove wss_data field from venc_device structure
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (5 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 06/50] drm/omap: Remove unused kobj field from struct omap_dss_device Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 08/50] drm/omap: Use atomic suspend/resume helpers Laurent Pinchart
` (42 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The venc_device structure wss_data field is set to 0 and never otherwise
modified, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/gpu/drm/omapdrm/dss/venc.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index b5f52727f8b1..fbe9d42dbdb6 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -323,7 +323,6 @@ struct venc_device {
struct platform_device *pdev;
void __iomem *base;
struct mutex venc_lock;
- u32 wss_data;
struct regulator *vdda_dac_reg;
struct dss_device *dss;
@@ -367,8 +366,7 @@ static void venc_write_config(struct venc_device *venc,
venc_write_reg(venc, VENC_BLACK_LEVEL, config->black_level);
venc_write_reg(venc, VENC_BLANK_LEVEL, config->blank_level);
venc_write_reg(venc, VENC_M_CONTROL, config->m_control);
- venc_write_reg(venc, VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data |
- venc->wss_data);
+ venc_write_reg(venc, VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data);
venc_write_reg(venc, VENC_S_CARR, config->s_carr);
venc_write_reg(venc, VENC_L21__WC_CTL, config->l21__wc_ctl);
venc_write_reg(venc, VENC_SAVID__EAVID, config->savid__eavid);
@@ -543,8 +541,6 @@ static int venc_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err0;
- venc->wss_data = 0;
-
mutex_unlock(&venc->venc_lock);
return 0;
@@ -585,10 +581,6 @@ static void venc_set_timings(struct omap_dss_device *dssdev,
mutex_lock(&venc->venc_lock);
- /* Reset WSS data when the TV standard changes. */
- if (memcmp(&venc->vm, vm, sizeof(*vm)))
- venc->wss_data = 0;
-
venc->vm = *vm;
dispc_set_tv_pclk(venc->dss->dispc, 13500000);
@@ -878,7 +870,6 @@ static int venc_probe(struct platform_device *pdev)
mutex_init(&venc->venc_lock);
- venc->wss_data = 0;
venc->vm = omap_dss_pal_vm;
venc_mem = platform_get_resource(venc->pdev, IORESOURCE_MEM, 0);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 08/50] drm/omap: Use atomic suspend/resume helpers
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (6 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 07/50] drm/omap: venc: Remove wss_data field from venc_device structure Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 09/50] drm/omap: Move common display enable/disable code to encoder Laurent Pinchart
` (41 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Instead of rolling out custom suspend/resume implementations based on
state information stored in the driver's data structures, use the atomic
suspend/resume helpers that rely on a DRM atomic state object.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
Changes since v1:
- Use drm_mode_config_helper_suspend()
---
drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 --
drivers/gpu/drm/omapdrm/omap_drv.c | 50 ++-------------------------
2 files changed, 2 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 3b4bf5c47173..7b2f2c8bf893 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -432,9 +432,6 @@ struct omap_dss_device {
unsigned long ops_flags;
u32 bus_flags;
- /* helper variable for driver suspend/resume */
- bool activate_after_resume;
-
enum omap_display_caps caps;
enum omap_dss_display_state state;
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index f8292278f57d..bddd4c1c43ae 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -685,54 +685,12 @@ static int pdev_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
-static int omap_drm_suspend_all_displays(struct drm_device *ddev)
-{
- struct omap_drm_private *priv = ddev->dev_private;
- int i;
-
- for (i = 0; i < priv->num_pipes; i++) {
- struct omap_dss_device *display = priv->pipes[i].display;
-
- if (display->state == OMAP_DSS_DISPLAY_ACTIVE) {
- display->ops->disable(display);
- display->activate_after_resume = true;
- } else {
- display->activate_after_resume = false;
- }
- }
-
- return 0;
-}
-
-static int omap_drm_resume_all_displays(struct drm_device *ddev)
-{
- struct omap_drm_private *priv = ddev->dev_private;
- int i;
-
- for (i = 0; i < priv->num_pipes; i++) {
- struct omap_dss_device *display = priv->pipes[i].display;
-
- if (display->activate_after_resume) {
- display->ops->enable(display);
- display->activate_after_resume = false;
- }
- }
-
- return 0;
-}
-
static int omap_drm_suspend(struct device *dev)
{
struct omap_drm_private *priv = dev_get_drvdata(dev);
struct drm_device *drm_dev = priv->ddev;
- drm_kms_helper_poll_disable(drm_dev);
-
- drm_modeset_lock_all(drm_dev);
- omap_drm_suspend_all_displays(drm_dev);
- drm_modeset_unlock_all(drm_dev);
-
- return 0;
+ return drm_mode_config_helper_suspend(drm_dev);
}
static int omap_drm_resume(struct device *dev)
@@ -740,11 +698,7 @@ static int omap_drm_resume(struct device *dev)
struct omap_drm_private *priv = dev_get_drvdata(dev);
struct drm_device *drm_dev = priv->ddev;
- drm_modeset_lock_all(drm_dev);
- omap_drm_resume_all_displays(drm_dev);
- drm_modeset_unlock_all(drm_dev);
-
- drm_kms_helper_poll_enable(drm_dev);
+ drm_mode_config_helper_resume(drm_dev);
return omap_gem_resume(drm_dev);
}
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 09/50] drm/omap: Move common display enable/disable code to encoder
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (7 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 08/50] drm/omap: Use atomic suspend/resume helpers Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 10/50] drm/omap: Remove connection checks from internal encoders .enable() Laurent Pinchart
` (40 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
All .enable() and .disable() handlers for panels and connectors share
common code that validates and updates the device's state. Move it to
common locations in the omap_encoder_enable() and omap_encoder_disable()
handlers.
The enabled check in the .disable() handler is left untouched, it will
be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../omapdrm/displays/connector-analog-tv.c | 23 +-------------
.../gpu/drm/omapdrm/displays/connector-dvi.c | 17 +----------
.../gpu/drm/omapdrm/displays/connector-hdmi.c | 23 +-------------
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 10 -------
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 18 -----------
.../displays/panel-lgphilips-lb035q02.c | 10 -------
.../omapdrm/displays/panel-nec-nl8048hl11.c | 10 -------
.../displays/panel-sharp-ls037v7dw01.c | 10 -------
.../omapdrm/displays/panel-sony-acx565akm.c | 18 +----------
.../omapdrm/displays/panel-tpo-td028ttec1.c | 14 +--------
.../omapdrm/displays/panel-tpo-td043mtea1.c | 10 -------
drivers/gpu/drm/omapdrm/omap_encoder.c | 30 +++++++++++++++++--
12 files changed, 32 insertions(+), 161 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
index 28a3ce8f88d2..910a5b9c036a 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
@@ -37,40 +37,19 @@ static void tvc_disconnect(struct omap_dss_device *src,
static int tvc_enable(struct omap_dss_device *dssdev)
{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- int r;
- dev_dbg(ddata->dev, "enable\n");
-
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
- r = src->ops->enable(src);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return r;
+ return src->ops->enable(src);
}
static void tvc_disable(struct omap_dss_device *dssdev)
{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- dev_dbg(ddata->dev, "disable\n");
-
if (!omapdss_device_is_enabled(dssdev))
return;
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static const struct omap_dss_device_ops tvc_ops = {
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
index 24b14f44248e..1e0925791c3d 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
@@ -49,21 +49,8 @@ static void dvic_disconnect(struct omap_dss_device *src,
static int dvic_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *src = dssdev->src;
- int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
- r = src->ops->enable(src);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
+ return src->ops->enable(src);
}
static void dvic_disable(struct omap_dss_device *dssdev)
@@ -74,8 +61,6 @@ static void dvic_disable(struct omap_dss_device *dssdev)
return;
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int dvic_ddc_read(struct i2c_adapter *adapter,
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
index e602fa4a50a4..649364e04edd 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
@@ -43,40 +43,19 @@ static void hdmic_disconnect(struct omap_dss_device *src,
static int hdmic_enable(struct omap_dss_device *dssdev)
{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- int r;
- dev_dbg(ddata->dev, "enable\n");
-
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
- r = src->ops->enable(src);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return r;
+ return src->ops->enable(src);
}
static void hdmic_disable(struct omap_dss_device *dssdev)
{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- dev_dbg(ddata->dev, "disable\n");
-
if (!omapdss_device_is_enabled(dssdev))
return;
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static bool hdmic_detect(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index 465120809eb3..ded779a598d3 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -51,12 +51,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -70,8 +64,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
backlight_enable(ddata->backlight);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
return 0;
}
@@ -89,8 +81,6 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
regulator_disable(ddata->vcc_supply);
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 29692a5217c5..e346451647c4 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -793,20 +793,8 @@ static int dsicm_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- dev_dbg(&ddata->pdev->dev, "enable\n");
-
mutex_lock(&ddata->lock);
- if (!omapdss_device_is_connected(dssdev)) {
- r = -ENODEV;
- goto err;
- }
-
- if (omapdss_device_is_enabled(dssdev)) {
- r = 0;
- goto err;
- }
-
src->ops->dsi.bus_lock(src);
r = dsicm_power_on(ddata);
@@ -816,8 +804,6 @@ static int dsicm_enable(struct omap_dss_device *dssdev)
if (r)
goto err;
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
mutex_unlock(&ddata->lock);
dsicm_bl_power(ddata, true);
@@ -835,8 +821,6 @@ static void dsicm_disable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- dev_dbg(&ddata->pdev->dev, "disable\n");
-
dsicm_bl_power(ddata, false);
mutex_lock(&ddata->lock);
@@ -853,8 +837,6 @@ static void dsicm_disable(struct omap_dss_device *dssdev)
src->ops->dsi.bus_unlock(src);
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
mutex_unlock(&ddata->lock);
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index f6ef8ff964dd..19c0c3e85aa5 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -129,12 +129,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -142,8 +136,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
return 0;
}
@@ -159,8 +151,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void lb035q02_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index f445de6369f7..9cef1d16d7d3 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -124,20 +124,12 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
gpiod_set_value_cansleep(ddata->res_gpio, 1);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
return 0;
}
@@ -152,8 +144,6 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->res_gpio, 0);
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void nec_8048_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 64b1369cb274..5a06fbb7984a 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -68,12 +68,6 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
if (ddata->vcc) {
r = regulator_enable(ddata->vcc);
if (r != 0)
@@ -95,8 +89,6 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 1);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
return 0;
}
@@ -122,8 +114,6 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
if (ddata->vcc)
regulator_disable(ddata->vcc);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index e04663856b31..209a87c70c99 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -594,39 +594,23 @@ static int acx565akm_enable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
int r;
- dev_dbg(dssdev->dev, "%s\n", __func__);
-
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
mutex_lock(&ddata->mutex);
r = acx565akm_panel_power_on(dssdev);
mutex_unlock(&ddata->mutex);
- if (r)
- return r;
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
+ return r;
}
static void acx565akm_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- dev_dbg(dssdev->dev, "%s\n", __func__);
-
if (!omapdss_device_is_enabled(dssdev))
return;
mutex_lock(&ddata->mutex);
acx565akm_panel_power_off(dssdev);
mutex_unlock(&ddata->mutex);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void acx565akm_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index 7ddc8c574a61..b09fea97a441 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -175,12 +175,6 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -198,7 +192,7 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
if (r) {
dev_warn(dssdev->dev, "transfer error\n");
- goto transfer_err;
+ return -EIO;
}
/* deep standby out */
@@ -268,10 +262,6 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-transfer_err:
-
return r ? -EIO : 0;
}
@@ -291,8 +281,6 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 8440fcb744d9..998f21f7701a 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -326,12 +326,6 @@ static int tpo_td043_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -348,8 +342,6 @@ static int tpo_td043_enable(struct omap_dss_device *dssdev)
}
}
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
return 0;
}
@@ -365,8 +357,6 @@ static void tpo_td043_disable(struct omap_dss_device *dssdev)
if (!ddata->spi_suspended)
tpo_td043_power_off(ddata);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 0d85b3a35767..5427c0b3ff9e 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -147,21 +147,45 @@ static void omap_encoder_disable(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->display;
+ struct drm_device *dev = encoder->dev;
+
+ dev_dbg(dev->dev, "disable(%s)\n", dssdev->name);
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
dssdev->ops->disable(dssdev);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void omap_encoder_enable(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->display;
+ struct drm_device *dev = encoder->dev;
int r;
+ dev_dbg(dev->dev, "enable(%s)\n", dssdev->name);
+
+ if (!omapdss_device_is_connected(dssdev)) {
+ r = -ENODEV;
+ goto error;
+ }
+
+ if (omapdss_device_is_enabled(dssdev))
+ return;
+
r = dssdev->ops->enable(dssdev);
if (r)
- dev_err(encoder->dev->dev,
- "Failed to enable display '%s': %d\n",
- dssdev->name, r);
+ goto error;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return;
+
+error:
+ dev_err(dev->dev, "Failed to enable display '%s': %d\n",
+ dssdev->name, r);
}
static int omap_encoder_atomic_check(struct drm_encoder *encoder,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 10/50] drm/omap: Remove connection checks from internal encoders .enable()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (8 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 09/50] drm/omap: Move common display enable/disable code to encoder Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 11/50] drm/omap: Remove connection checks from display .enable() and .remove() Laurent Pinchart
` (39 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The internal encoders return an error from their .enable() handler when
their are not connected to a dss manager. As the flag used is set and
cleared in the connect and disconnect handlers, this effectively checks
whether the omap_dss_device is connected.
The .enable() handler is called from code paths that access the dss
devices chain from the display device, which is set to NULL when the
device isn't connected, making it impossible to access the device in
that case.
The safety check is thus not needed, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dpi.c | 17 +----------------
drivers/gpu/drm/omapdrm/dss/dsi.c | 20 ++------------------
drivers/gpu/drm/omapdrm/dss/hdmi4.c | 17 +----------------
drivers/gpu/drm/omapdrm/dss/hdmi5.c | 17 +----------------
drivers/gpu/drm/omapdrm/dss/omapdss.h | 1 -
drivers/gpu/drm/omapdrm/dss/sdi.c | 16 +---------------
drivers/gpu/drm/omapdrm/dss/venc.c | 17 +----------------
7 files changed, 7 insertions(+), 98 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index ca4f3c4c6318..0cf3b220e35f 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -386,12 +386,6 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&dpi->lock);
- if (!out->dispc_channel_connected) {
- DSSERR("failed to enable display: no output/manager\n");
- r = -ENODEV;
- goto err_no_out_mgr;
- }
-
if (dpi->vdds_dsi_reg) {
r = regulator_enable(dpi->vdds_dsi_reg);
if (r)
@@ -439,7 +433,6 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
if (dpi->vdds_dsi_reg)
regulator_disable(dpi->vdds_dsi_reg);
err_reg_enable:
-err_no_out_mgr:
mutex_unlock(&dpi->lock);
return r;
}
@@ -596,23 +589,15 @@ static int dpi_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
struct dpi_data *dpi = dpi_get_data_from_dssdev(dst);
- int r;
dpi_init_pll(dpi);
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void dpi_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 64fb788b6647..c14f8fb2a99b 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -3753,19 +3753,13 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
{
struct dsi_data *dsi = to_dsi_data(dssdev);
int bpp = dsi_get_pixel_size(dsi->pix_fmt);
- struct omap_dss_device *out = &dsi->output;
u8 data_type;
u16 word_count;
int r;
- if (!out->dispc_channel_connected) {
- DSSERR("failed to enable display: no output/manager\n");
- return -ENODEV;
- }
-
r = dsi_display_init_dispc(dsi);
if (r)
- goto err_init_dispc;
+ return r;
if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
switch (dsi->pix_fmt) {
@@ -3814,7 +3808,6 @@ static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
}
err_pix_fmt:
dsi_display_uninit_dispc(dsi);
-err_init_dispc:
return r;
}
@@ -4888,21 +4881,12 @@ static int dsi_get_clocks(struct dsi_data *dsi)
static int dsi_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- int r;
-
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void dsi_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index aabdda394c9c..b6b44f07c74e 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -322,12 +322,6 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&hdmi->lock);
- if (!dssdev->dispc_channel_connected) {
- DSSERR("failed to enable display: no output/manager\n");
- r = -ENODEV;
- goto err0;
- }
-
r = hdmi_power_on_full(hdmi);
if (r) {
DSSERR("failed to power on device\n");
@@ -417,21 +411,12 @@ void hdmi4_core_disable(struct hdmi_core_data *core)
static int hdmi_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- int r;
-
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void hdmi_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index 9e8556f67a29..beef25703eab 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -330,12 +330,6 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&hdmi->lock);
- if (!dssdev->dispc_channel_connected) {
- DSSERR("failed to enable display: no output/manager\n");
- r = -ENODEV;
- goto err0;
- }
-
r = hdmi_power_on_full(hdmi);
if (r) {
DSSERR("failed to power on device\n");
@@ -422,21 +416,12 @@ static void hdmi_core_disable(struct omap_hdmi *hdmi)
static int hdmi_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- int r;
-
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void hdmi_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 7b2f2c8bf893..de0520a8eb4e 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -440,7 +440,6 @@ struct omap_dss_device {
/* DISPC channel for this output */
enum omap_channel dispc_channel;
- bool dispc_channel_connected;
/* output instance */
enum omap_dss_output_id id;
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index b2fe2387037a..7de817c69913 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -136,11 +136,6 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
unsigned long fck;
int r;
- if (!sdi->output.dispc_channel_connected) {
- DSSERR("failed to enable display: no output/manager\n");
- return -ENODEV;
- }
-
r = regulator_enable(sdi->vdds_sdi_reg);
if (r)
goto err_reg_enable;
@@ -251,21 +246,12 @@ static int sdi_check_timings(struct omap_dss_device *dssdev,
static int sdi_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- int r;
-
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void sdi_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index fbe9d42dbdb6..bc9a3d52f34d 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -531,12 +531,6 @@ static int venc_display_enable(struct omap_dss_device *dssdev)
mutex_lock(&venc->venc_lock);
- if (!dssdev->dispc_channel_connected) {
- DSSERR("Failed to enable display: no output/manager\n");
- r = -ENODEV;
- goto err0;
- }
-
r = venc_power_on(venc);
if (r)
goto err0;
@@ -687,21 +681,12 @@ static int venc_get_clocks(struct venc_device *venc)
static int venc_connect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- int r;
-
- r = omapdss_device_connect(dst->dss, dst, dst->next);
- if (r)
- return r;
-
- dst->dispc_channel_connected = true;
- return 0;
+ return omapdss_device_connect(dst->dss, dst, dst->next);
}
static void venc_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dst->dispc_channel_connected = false;
-
omapdss_device_disconnect(dst, dst->next);
}
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 11/50] drm/omap: Remove connection checks from display .enable() and .remove()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (9 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 10/50] drm/omap: Remove connection checks from internal encoders .enable() Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 12/50] drm/omap: Remove enable " Laurent Pinchart
` (38 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The displays (connectors, panels and encoders) return an error from
their .enable() handler when the dss device is not connected. They also
disconnect the dss device explicitly from their .remove() handler if it
is still connected.
Those safety checks are not needed:
- The .enable() handler is called from code paths that access the dss
devices chain from the display device, which is set to NULL when the
device isn't connected.
- The .remove() handler can only be called when unloading the module as
the driver has the suppress_bind_attrs attribute set, and a reference
to the module is taken when constructing the dss devices chain, so the
module can only be unloaded when the dss device is disconnected.
Remove the safety checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../gpu/drm/omapdrm/displays/encoder-opa362.c | 7 -------
.../gpu/drm/omapdrm/displays/encoder-tfp410.c | 7 -------
.../drm/omapdrm/displays/encoder-tpd12s015.c | 4 ----
drivers/gpu/drm/omapdrm/dss/base.c | 5 +++++
drivers/gpu/drm/omapdrm/dss/omapdss.h | 5 -----
drivers/gpu/drm/omapdrm/omap_encoder.c | 17 +++++------------
6 files changed, 10 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
index 4fefd80f53bb..0b1032625e42 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
@@ -49,9 +49,6 @@ static int opa362_enable(struct omap_dss_device *dssdev)
dev_dbg(dssdev->dev, "enable\n");
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
if (omapdss_device_is_enabled(dssdev))
return 0;
@@ -145,10 +142,6 @@ static int __exit opa362_remove(struct platform_device *pdev)
if (omapdss_device_is_enabled(dssdev))
opa362_disable(dssdev);
- WARN_ON(omapdss_device_is_connected(dssdev));
- if (omapdss_device_is_connected(dssdev))
- omapdss_device_disconnect(NULL, dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
index f1a748353279..fcc2dc5188a2 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
@@ -42,9 +42,6 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (!omapdss_device_is_connected(dssdev))
- return -ENODEV;
-
if (omapdss_device_is_enabled(dssdev))
return 0;
@@ -139,10 +136,6 @@ static int __exit tfp410_remove(struct platform_device *pdev)
if (omapdss_device_is_enabled(dssdev))
tfp410_disable(dssdev);
- WARN_ON(omapdss_device_is_connected(dssdev));
- if (omapdss_device_is_connected(dssdev))
- omapdss_device_disconnect(NULL, dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
index 94de55fd8884..1a2bc59bf104 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
@@ -229,10 +229,6 @@ static int __exit tpd_remove(struct platform_device *pdev)
if (omapdss_device_is_enabled(dssdev))
tpd_disable(dssdev);
- WARN_ON(omapdss_device_is_connected(dssdev));
- if (omapdss_device_is_connected(dssdev))
- omapdss_device_disconnect(NULL, dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 472f56e3de70..787157b00694 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -185,6 +185,11 @@ struct omap_dss_device *omapdss_device_get_next(struct omap_dss_device *from,
}
EXPORT_SYMBOL(omapdss_device_get_next);
+static bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
+{
+ return dssdev->src;
+}
+
int omapdss_device_connect(struct dss_device *dss,
struct omap_dss_device *src,
struct omap_dss_device *dst)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index de0520a8eb4e..698155dd7941 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -505,11 +505,6 @@ int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
int omapdss_compat_init(void);
void omapdss_compat_uninit(void);
-static inline bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
-{
- return dssdev->src;
-}
-
static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
{
return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 5427c0b3ff9e..3c3d88e1df38 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -168,24 +168,17 @@ static void omap_encoder_enable(struct drm_encoder *encoder)
dev_dbg(dev->dev, "enable(%s)\n", dssdev->name);
- if (!omapdss_device_is_connected(dssdev)) {
- r = -ENODEV;
- goto error;
- }
-
if (omapdss_device_is_enabled(dssdev))
return;
r = dssdev->ops->enable(dssdev);
- if (r)
- goto error;
+ if (r) {
+ dev_err(dev->dev, "Failed to enable display '%s': %d\n",
+ dssdev->name, r);
+ return;
+ }
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
- return;
-
-error:
- dev_err(dev->dev, "Failed to enable display '%s': %d\n",
- dssdev->name, r);
}
static int omap_encoder_atomic_check(struct drm_encoder *encoder,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 12/50] drm/omap: Remove enable checks from display .enable() and .remove()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (10 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 11/50] drm/omap: Remove connection checks from display .enable() and .remove() Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 13/50] drm/omap: Reverse direction of the DSS device enable/disable operations Laurent Pinchart
` (37 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The displays (connectors, panels and encoders) bail out from their
.enable() and .disable() handlers if the dss device is already enabled
or disabled. Those safety checks are not needed when the functions are
called through the omapdss_device_ops, as the .enable() and .disable()
handlers are called from the DRM atomic helpers that already guarantee
that no double enabling or disabling can occur.
However, the handlers are also called directly from the .remove()
handler. While this shouldn't be needed either as the modules can't be
removed as long as the device is in use, it's still a good practice to
disable the device explicitly. There is currently a safety check in
.remove() in some drivers but not all of them.
Remove the safety checks from the .enable() and .disable() handlers, and
add missing ones in the .remove() handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../gpu/drm/omapdrm/displays/connector-analog-tv.c | 6 ++----
drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 6 ++----
drivers/gpu/drm/omapdrm/displays/connector-hdmi.c | 6 ++----
drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 6 ------
drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c | 6 ------
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 6 ++----
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 11 +++++------
.../drm/omapdrm/displays/panel-lgphilips-lb035q02.c | 6 ++----
.../gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c | 6 ++----
.../drm/omapdrm/displays/panel-sharp-ls037v7dw01.c | 6 ++----
.../gpu/drm/omapdrm/displays/panel-sony-acx565akm.c | 6 ++----
.../gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c | 6 ++----
.../gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c | 6 ++----
drivers/gpu/drm/omapdrm/omap_encoder.c | 6 ------
14 files changed, 25 insertions(+), 64 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
index 910a5b9c036a..2b5b77627cfb 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
@@ -46,9 +46,6 @@ static void tvc_disable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
src->ops->disable(src);
}
@@ -92,7 +89,8 @@ static int __exit tvc_remove(struct platform_device *pdev)
omapdss_device_unregister(&ddata->dssdev);
- tvc_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ tvc_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
index 1e0925791c3d..a1784e263835 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
@@ -57,9 +57,6 @@ static void dvic_disable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
src->ops->disable(src);
}
@@ -282,7 +279,8 @@ static int __exit dvic_remove(struct platform_device *pdev)
omapdss_device_unregister(&ddata->dssdev);
- dvic_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ dvic_disable(dssdev);
i2c_put_adapter(ddata->i2c_adapter);
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
index 649364e04edd..05cd503c4d29 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
@@ -52,9 +52,6 @@ static void hdmic_disable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
src->ops->disable(src);
}
@@ -179,7 +176,8 @@ static int __exit hdmic_remove(struct platform_device *pdev)
omapdss_device_unregister(&ddata->dssdev);
- hdmic_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ hdmic_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
index 0b1032625e42..ce116c28479f 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
@@ -49,9 +49,6 @@ static int opa362_enable(struct omap_dss_device *dssdev)
dev_dbg(dssdev->dev, "enable\n");
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -71,9 +68,6 @@ static void opa362_disable(struct omap_dss_device *dssdev)
dev_dbg(dssdev->dev, "disable\n");
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
index fcc2dc5188a2..d51410ed1e13 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
@@ -42,9 +42,6 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
struct omap_dss_device *src = dssdev->src;
int r;
- if (omapdss_device_is_enabled(dssdev))
- return 0;
-
r = src->ops->enable(src);
if (r)
return r;
@@ -62,9 +59,6 @@ static void tfp410_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
if (ddata->pd_gpio)
gpiod_set_value_cansleep(ddata->pd_gpio, 0);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index ded779a598d3..3ef4596a3698 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -72,9 +72,6 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
backlight_disable(ddata->backlight);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
@@ -182,7 +179,8 @@ static int __exit panel_dpi_remove(struct platform_device *pdev)
omapdss_device_unregister(dssdev);
- panel_dpi_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ panel_dpi_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index e346451647c4..a7c8688237fb 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -829,11 +829,9 @@ static void dsicm_disable(struct omap_dss_device *dssdev)
src->ops->dsi.bus_lock(src);
- if (omapdss_device_is_enabled(dssdev)) {
- r = dsicm_wake_up(ddata);
- if (!r)
- dsicm_power_off(ddata);
- }
+ r = dsicm_wake_up(ddata);
+ if (!r)
+ dsicm_power_off(ddata);
src->ops->dsi.bus_unlock(src);
@@ -1367,7 +1365,8 @@ static int __exit dsicm_remove(struct platform_device *pdev)
omapdss_device_unregister(dssdev);
- dsicm_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ dsicm_disable(dssdev);
omapdss_device_disconnect(dssdev->src, dssdev);
sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index 19c0c3e85aa5..2c3b15ba5a39 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -144,9 +144,6 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
@@ -235,7 +232,8 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- lb035q02_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ lb035q02_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index 9cef1d16d7d3..ef83459611be 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -138,9 +138,6 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
gpiod_set_value_cansleep(ddata->res_gpio, 0);
src->ops->disable(src);
@@ -226,7 +223,8 @@ static int nec_8048_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- nec_8048_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ nec_8048_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 5a06fbb7984a..0c5b405b4c9e 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -97,9 +97,6 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 0);
@@ -233,7 +230,8 @@ static int __exit sharp_ls_remove(struct platform_device *pdev)
omapdss_device_unregister(dssdev);
- sharp_ls_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ sharp_ls_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index 209a87c70c99..99c2c4f27dd5 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -605,9 +605,6 @@ static void acx565akm_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
mutex_lock(&ddata->mutex);
acx565akm_panel_power_off(dssdev);
mutex_unlock(&ddata->mutex);
@@ -750,7 +747,8 @@ static int acx565akm_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- acx565akm_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ acx565akm_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index b09fea97a441..8551a1df3ad6 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -270,9 +270,6 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
@@ -357,7 +354,8 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- td028ttec1_panel_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ td028ttec1_panel_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 998f21f7701a..527abed69d34 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -350,9 +350,6 @@ static void tpo_td043_disable(struct omap_dss_device *dssdev)
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
src->ops->disable(src);
if (!ddata->spi_suspended)
@@ -457,7 +454,8 @@ static int tpo_td043_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- tpo_td043_disable(dssdev);
+ if (omapdss_device_is_enabled(dssdev))
+ tpo_td043_disable(dssdev);
sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 3c3d88e1df38..d14d465392dd 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -151,9 +151,6 @@ static void omap_encoder_disable(struct drm_encoder *encoder)
dev_dbg(dev->dev, "disable(%s)\n", dssdev->name);
- if (!omapdss_device_is_enabled(dssdev))
- return;
-
dssdev->ops->disable(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
@@ -168,9 +165,6 @@ static void omap_encoder_enable(struct drm_encoder *encoder)
dev_dbg(dev->dev, "enable(%s)\n", dssdev->name);
- if (omapdss_device_is_enabled(dssdev))
- return;
-
r = dssdev->ops->enable(dssdev);
if (r) {
dev_err(dev->dev, "Failed to enable display '%s': %d\n",
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 13/50] drm/omap: Reverse direction of the DSS device enable/disable operations
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (11 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 12/50] drm/omap: Remove enable " Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 14/50] drm/omap: Remove omap_dss_device dst field Laurent Pinchart
` (36 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.
Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel
model by reversing the direction of the DSS device .enable() and
.disable() operations. This completes the move to the DRM bridge model,
with the notable exception of the DSI pipelines that will require more
work.
We also adapt the omapdss shutdown handler dss_shutdown() to shut down
all active pipelines starting from the pipeline output device instead of
the display device.
As a consequence the for_each_dss_display() macro isn't used and can be
removed, and the omapdss_device_get_next() function underlying the macro
can be simplified to search for output devices only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Shutdown pipelines starting at the output device
---
.../omapdrm/displays/connector-analog-tv.c | 21 ------
.../gpu/drm/omapdrm/displays/connector-dvi.c | 21 ------
.../gpu/drm/omapdrm/displays/connector-hdmi.c | 21 ------
.../gpu/drm/omapdrm/displays/encoder-opa362.c | 25 +------
.../gpu/drm/omapdrm/displays/encoder-tfp410.c | 21 +-----
.../drm/omapdrm/displays/encoder-tpd12s015.c | 35 ---------
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 18 +----
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 22 ++----
.../displays/panel-lgphilips-lb035q02.c | 16 +---
.../omapdrm/displays/panel-nec-nl8048hl11.c | 16 +---
.../displays/panel-sharp-ls037v7dw01.c | 32 ++++----
.../omapdrm/displays/panel-sony-acx565akm.c | 18 +----
.../omapdrm/displays/panel-tpo-td028ttec1.c | 25 ++-----
.../omapdrm/displays/panel-tpo-td043mtea1.c | 17 +----
drivers/gpu/drm/omapdrm/dss/base.c | 73 +++++++++++++++----
drivers/gpu/drm/omapdrm/dss/dpi.c | 5 +-
drivers/gpu/drm/omapdrm/dss/dsi.c | 7 +-
drivers/gpu/drm/omapdrm/dss/dss.c | 2 +-
drivers/gpu/drm/omapdrm/dss/hdmi4.c | 12 +--
drivers/gpu/drm/omapdrm/dss/hdmi5.c | 12 +--
drivers/gpu/drm/omapdrm/dss/omapdss.h | 20 +++--
drivers/gpu/drm/omapdrm/dss/sdi.c | 8 +-
drivers/gpu/drm/omapdrm/dss/venc.c | 12 +--
drivers/gpu/drm/omapdrm/omap_encoder.c | 49 ++++++++++---
24 files changed, 171 insertions(+), 337 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
index 2b5b77627cfb..1503563117f3 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
@@ -35,26 +35,9 @@ static void tvc_disconnect(struct omap_dss_device *src,
{
}
-static int tvc_enable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- return src->ops->enable(src);
-}
-
-static void tvc_disable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- src->ops->disable(src);
-}
-
static const struct omap_dss_device_ops tvc_ops = {
.connect = tvc_connect,
.disconnect = tvc_disconnect,
-
- .enable = tvc_enable,
- .disable = tvc_disable,
};
static int tvc_probe(struct platform_device *pdev)
@@ -85,13 +68,9 @@ static int tvc_probe(struct platform_device *pdev)
static int __exit tvc_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
omapdss_device_unregister(&ddata->dssdev);
- if (omapdss_device_is_enabled(dssdev))
- tvc_disable(dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
index a1784e263835..bf5ee50ce5fe 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
@@ -46,20 +46,6 @@ static void dvic_disconnect(struct omap_dss_device *src,
{
}
-static int dvic_enable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- return src->ops->enable(src);
-}
-
-static void dvic_disable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- src->ops->disable(src);
-}
-
static int dvic_ddc_read(struct i2c_adapter *adapter,
unsigned char *buf, u16 count, u8 offset)
{
@@ -163,9 +149,6 @@ static const struct omap_dss_device_ops dvic_ops = {
.connect = dvic_connect,
.disconnect = dvic_disconnect,
- .enable = dvic_enable,
- .disable = dvic_disable,
-
.read_edid = dvic_read_edid,
.detect = dvic_detect,
@@ -275,13 +258,9 @@ static int dvic_probe(struct platform_device *pdev)
static int __exit dvic_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
omapdss_device_unregister(&ddata->dssdev);
- if (omapdss_device_is_enabled(dssdev))
- dvic_disable(dssdev);
-
i2c_put_adapter(ddata->i2c_adapter);
mutex_destroy(&ddata->hpd_lock);
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
index 05cd503c4d29..797da4a3f22e 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
@@ -41,20 +41,6 @@ static void hdmic_disconnect(struct omap_dss_device *src,
{
}
-static int hdmic_enable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- return src->ops->enable(src);
-}
-
-static void hdmic_disable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- src->ops->disable(src);
-}
-
static bool hdmic_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
@@ -89,9 +75,6 @@ static const struct omap_dss_device_ops hdmic_ops = {
.connect = hdmic_connect,
.disconnect = hdmic_disconnect,
- .enable = hdmic_enable,
- .disable = hdmic_disable,
-
.detect = hdmic_detect,
.register_hpd_cb = hdmic_register_hpd_cb,
.unregister_hpd_cb = hdmic_unregister_hpd_cb,
@@ -172,13 +155,9 @@ static int hdmic_probe(struct platform_device *pdev)
static int __exit hdmic_remove(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
omapdss_device_unregister(&ddata->dssdev);
- if (omapdss_device_is_enabled(dssdev))
- hdmic_disable(dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
index ce116c28479f..fc5e0c47054d 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
@@ -41,39 +41,20 @@ static void opa362_disconnect(struct omap_dss_device *src,
omapdss_device_disconnect(dst, dst->next);
}
-static int opa362_enable(struct omap_dss_device *dssdev)
+static void opa362_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
-
- dev_dbg(dssdev->dev, "enable\n");
-
- r = src->ops->enable(src);
- if (r)
- return r;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
}
static void opa362_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
-
- dev_dbg(dssdev->dev, "disable\n");
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
-
- src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static const struct omap_dss_device_ops opa362_ops = {
@@ -132,9 +113,7 @@ static int __exit opa362_remove(struct platform_device *pdev)
omapdss_device_put(dssdev->next);
omapdss_device_unregister(&ddata->dssdev);
- WARN_ON(omapdss_device_is_enabled(dssdev));
- if (omapdss_device_is_enabled(dssdev))
- opa362_disable(dssdev);
+ opa362_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
index d51410ed1e13..82035078377a 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
@@ -36,35 +36,20 @@ static void tfp410_disconnect(struct omap_dss_device *src,
omapdss_device_disconnect(dst, dst->next);
}
-static int tfp410_enable(struct omap_dss_device *dssdev)
+static void tfp410_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
-
- r = src->ops->enable(src);
- if (r)
- return r;
if (ddata->pd_gpio)
gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return 0;
}
static void tfp410_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
if (ddata->pd_gpio)
gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-
- src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static const struct omap_dss_device_ops tfp410_ops = {
@@ -126,9 +111,7 @@ static int __exit tfp410_remove(struct platform_device *pdev)
omapdss_device_put(dssdev->next);
omapdss_device_unregister(&ddata->dssdev);
- WARN_ON(omapdss_device_is_enabled(dssdev));
- if (omapdss_device_is_enabled(dssdev))
- tfp410_disable(dssdev);
+ tfp410_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
index 1a2bc59bf104..ced36718a95f 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
@@ -62,35 +62,6 @@ static void tpd_disconnect(struct omap_dss_device *src,
omapdss_device_disconnect(dst, dst->next);
}
-static int tpd_enable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
- int r;
-
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
- return 0;
-
- r = src->ops->enable(src);
- if (r)
- return r;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- return r;
-}
-
-static void tpd_disable(struct omap_dss_device *dssdev)
-{
- struct omap_dss_device *src = dssdev->src;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return;
-
- src->ops->disable(src);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
static bool tpd_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
@@ -124,8 +95,6 @@ static void tpd_unregister_hpd_cb(struct omap_dss_device *dssdev)
static const struct omap_dss_device_ops tpd_ops = {
.connect = tpd_connect,
.disconnect = tpd_disconnect,
- .enable = tpd_enable,
- .disable = tpd_disable,
.detect = tpd_detect,
.register_hpd_cb = tpd_register_hpd_cb,
.unregister_hpd_cb = tpd_unregister_hpd_cb,
@@ -225,10 +194,6 @@ static int __exit tpd_remove(struct platform_device *pdev)
omapdss_device_put(dssdev->next);
omapdss_device_unregister(&ddata->dssdev);
- WARN_ON(omapdss_device_is_enabled(dssdev));
- if (omapdss_device_is_enabled(dssdev))
- tpd_disable(dssdev);
-
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index 3ef4596a3698..eee44d9ea0c3 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -45,39 +45,27 @@ static void panel_dpi_disconnect(struct omap_dss_device *src,
{
}
-static int panel_dpi_enable(struct omap_dss_device *dssdev)
+static void panel_dpi_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
int r;
- r = src->ops->enable(src);
- if (r)
- return r;
-
r = regulator_enable(ddata->vcc_supply);
- if (r) {
- src->ops->disable(src);
- return r;
- }
+ if (r)
+ return;
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
backlight_enable(ddata->backlight);
-
- return 0;
}
static void panel_dpi_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
backlight_disable(ddata->backlight);
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
regulator_disable(ddata->vcc_supply);
-
- src->ops->disable(src);
}
static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index a7c8688237fb..ffbf20e6ebe9 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -315,12 +315,7 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
if (!ddata->ulps_enabled)
return 0;
- r = src->ops->enable(src);
- if (r) {
- dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
- goto err1;
- }
-
+ src->ops->enable(src);
src->ops->dsi.enable_hs(src, ddata->channel, true);
r = _dsicm_enable_te(ddata, true);
@@ -347,7 +342,7 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
ddata->ulps_enabled = false;
}
-err1:
+
dsicm_queue_ulps_work(ddata);
return r;
@@ -649,11 +644,7 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
goto err_vddi;
}
- r = src->ops->enable(src);
- if (r) {
- dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
- goto err_vddi;
- }
+ src->ops->enable(src);
dsicm_hw_reset(ddata);
@@ -787,7 +778,7 @@ static void dsicm_disconnect(struct omap_dss_device *src,
src->ops->dsi.release_vc(src, ddata->channel);
}
-static int dsicm_enable(struct omap_dss_device *dssdev)
+static void dsicm_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *src = dssdev->src;
@@ -808,11 +799,10 @@ static int dsicm_enable(struct omap_dss_device *dssdev)
dsicm_bl_power(ddata, true);
- return 0;
+ return;
err:
- dev_dbg(&ddata->pdev->dev, "enable failed\n");
+ dev_dbg(&ddata->pdev->dev, "enable failed (%d)\n", r);
mutex_unlock(&ddata->lock);
- return r;
}
static void dsicm_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index 2c3b15ba5a39..e043cab0a0c9 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -123,31 +123,20 @@ static void lb035q02_disconnect(struct omap_dss_device *src,
{
}
-static int lb035q02_enable(struct omap_dss_device *dssdev)
+static void lb035q02_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
-
- r = src->ops->enable(src);
- if (r)
- return r;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 1);
-
- return 0;
}
static void lb035q02_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
if (ddata->enable_gpio)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
-
- src->ops->disable(src);
}
static void lb035q02_get_timings(struct omap_dss_device *dssdev,
@@ -232,8 +221,7 @@ static int lb035q02_panel_spi_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- if (omapdss_device_is_enabled(dssdev))
- lb035q02_disable(dssdev);
+ lb035q02_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index ef83459611be..44fd6134317d 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -118,29 +118,18 @@ static void nec_8048_disconnect(struct omap_dss_device *src,
{
}
-static int nec_8048_enable(struct omap_dss_device *dssdev)
+static void nec_8048_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
-
- r = src->ops->enable(src);
- if (r)
- return r;
gpiod_set_value_cansleep(ddata->res_gpio, 1);
-
- return 0;
}
static void nec_8048_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
gpiod_set_value_cansleep(ddata->res_gpio, 0);
-
- src->ops->disable(src);
}
static void nec_8048_get_timings(struct omap_dss_device *dssdev,
@@ -223,8 +212,7 @@ static int nec_8048_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- if (omapdss_device_is_enabled(dssdev))
- nec_8048_disable(dssdev);
+ nec_8048_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 0c5b405b4c9e..907abf8ef4e6 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -62,23 +62,22 @@ static void sharp_ls_disconnect(struct omap_dss_device *src,
{
}
-static int sharp_ls_enable(struct omap_dss_device *dssdev)
+static void sharp_ls_pre_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
int r;
if (ddata->vcc) {
r = regulator_enable(ddata->vcc);
- if (r != 0)
- return r;
+ if (r)
+ dev_err(dssdev->dev, "%s: failed to enable regulator\n",
+ __func__);
}
+}
- r = src->ops->enable(src);
- if (r) {
- regulator_disable(ddata->vcc);
- return r;
- }
+static void sharp_ls_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
@@ -88,14 +87,11 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 1);
-
- return 0;
}
static void sharp_ls_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
if (ddata->ini_gpio)
gpiod_set_value_cansleep(ddata->ini_gpio, 0);
@@ -104,10 +100,12 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->resb_gpio, 0);
/* wait at least 5 vsyncs after disabling the LCD */
-
msleep(100);
+}
- src->ops->disable(src);
+static void sharp_ls_post_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
if (ddata->vcc)
regulator_disable(ddata->vcc);
@@ -125,8 +123,10 @@ static const struct omap_dss_device_ops sharp_ls_ops = {
.connect = sharp_ls_connect,
.disconnect = sharp_ls_disconnect,
+ .pre_enable = sharp_ls_pre_enable,
.enable = sharp_ls_enable,
.disable = sharp_ls_disable,
+ .post_disable = sharp_ls_post_disable,
.get_timings = sharp_ls_get_timings,
};
@@ -230,8 +230,10 @@ static int __exit sharp_ls_remove(struct platform_device *pdev)
omapdss_device_unregister(dssdev);
- if (omapdss_device_is_enabled(dssdev))
+ if (omapdss_device_is_enabled(dssdev)) {
sharp_ls_disable(dssdev);
+ sharp_ls_post_disable(dssdev);
+ }
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index 99c2c4f27dd5..eeaea752f171 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -516,17 +516,9 @@ static void acx565akm_disconnect(struct omap_dss_device *src,
static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
dev_dbg(&ddata->spi->dev, "%s\n", __func__);
- r = src->ops->enable(src);
- if (r) {
- pr_err("%s sdi enable failed\n", __func__);
- return r;
- }
-
/*FIXME tweak me */
msleep(50);
@@ -562,7 +554,6 @@ static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
dev_dbg(dssdev->dev, "%s\n", __func__);
@@ -585,20 +576,15 @@ static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
/* FIXME need to tweak this delay */
msleep(100);
-
- src->ops->disable(src);
}
-static int acx565akm_enable(struct omap_dss_device *dssdev)
+static void acx565akm_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r;
mutex_lock(&ddata->mutex);
- r = acx565akm_panel_power_on(dssdev);
+ acx565akm_panel_power_on(dssdev);
mutex_unlock(&ddata->mutex);
-
- return r;
}
static void acx565akm_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index 8551a1df3ad6..f1a5c14407a4 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -169,18 +169,12 @@ static void td028ttec1_panel_disconnect(struct omap_dss_device *src,
{
}
-static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
+static void td028ttec1_panel_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
- int r;
+ int r = 0;
- r = src->ops->enable(src);
- if (r)
- return r;
-
- dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
- dssdev->state);
+ dev_dbg(dssdev->dev, "%s: state %d\n", __func__, dssdev->state);
/* three times command zero */
r |= jbt_ret_write_0(ddata, 0x00);
@@ -191,8 +185,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
usleep_range(1000, 2000);
if (r) {
- dev_warn(dssdev->dev, "transfer error\n");
- return -EIO;
+ dev_warn(dssdev->dev, "%s: transfer error\n", __func__);
+ return;
}
/* deep standby out */
@@ -262,13 +256,13 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
- return r ? -EIO : 0;
+ if (r)
+ dev_err(dssdev->dev, "%s: write error\n", __func__);
}
static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
@@ -276,8 +270,6 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
-
- src->ops->disable(src);
}
static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
@@ -354,8 +346,7 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
omapdss_device_unregister(dssdev);
- if (omapdss_device_is_enabled(dssdev))
- td028ttec1_panel_disable(dssdev);
+ td028ttec1_panel_disable(dssdev);
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 527abed69d34..996a16736d10 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -320,16 +320,11 @@ static void tpo_td043_disconnect(struct omap_dss_device *src,
{
}
-static int tpo_td043_enable(struct omap_dss_device *dssdev)
+static void tpo_td043_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
int r;
- r = src->ops->enable(src);
- if (r)
- return r;
-
/*
* If we are resuming from system suspend, SPI clocks might not be
* enabled yet, so we'll program the LCD from SPI PM resume callback.
@@ -337,20 +332,16 @@ static int tpo_td043_enable(struct omap_dss_device *dssdev)
if (!ddata->spi_suspended) {
r = tpo_td043_power_on(ddata);
if (r) {
- src->ops->disable(src);
- return r;
+ dev_err(&ddata->spi->dev, "%s: power on failed (%d)\n",
+ __func__, r);
+ return;
}
}
-
- return 0;
}
static void tpo_td043_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
-
- src->ops->disable(src);
if (!ddata->spi_suspended)
tpo_td043_power_off(ddata);
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 787157b00694..916225d62cc2 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -126,13 +126,10 @@ struct omap_dss_device *omapdss_find_device_by_port(struct device_node *src,
}
/*
- * Search for the next device starting at @from. The type argument specfies
- * which device types to consider when searching. Searching for multiple types
- * is supported by and'ing their type flags. Release the reference to the @from
- * device, and acquire a reference to the returned device if found.
+ * Search for the next output device starting at @from. Release the reference to
+ * the @from device, and acquire a reference to the returned device if found.
*/
-struct omap_dss_device *omapdss_device_get_next(struct omap_dss_device *from,
- enum omap_dss_device_type type)
+struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from)
{
struct omap_dss_device *dssdev;
struct list_head *list;
@@ -160,15 +157,7 @@ struct omap_dss_device *omapdss_device_get_next(struct omap_dss_device *from,
goto done;
}
- /*
- * Accept display entities if the display type is requested,
- * and output entities if the output type is requested.
- */
- if ((type & OMAP_DSS_DEVICE_TYPE_DISPLAY) &&
- !dssdev->output_type)
- goto done;
- if ((type & OMAP_DSS_DEVICE_TYPE_OUTPUT) && dssdev->id &&
- dssdev->next)
+ if (dssdev->id && dssdev->next)
goto done;
}
@@ -183,7 +172,7 @@ struct omap_dss_device *omapdss_device_get_next(struct omap_dss_device *from,
mutex_unlock(&omapdss_devices_lock);
return dssdev;
}
-EXPORT_SYMBOL(omapdss_device_get_next);
+EXPORT_SYMBOL(omapdss_device_next_output);
static bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
{
@@ -244,6 +233,58 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
}
EXPORT_SYMBOL_GPL(omapdss_device_disconnect);
+void omapdss_device_pre_enable(struct omap_dss_device *dssdev)
+{
+ if (!dssdev)
+ return;
+
+ omapdss_device_pre_enable(dssdev->next);
+
+ if (dssdev->ops->pre_enable)
+ dssdev->ops->pre_enable(dssdev);
+}
+EXPORT_SYMBOL_GPL(omapdss_device_pre_enable);
+
+void omapdss_device_enable(struct omap_dss_device *dssdev)
+{
+ if (!dssdev)
+ return;
+
+ if (dssdev->ops->enable)
+ dssdev->ops->enable(dssdev);
+
+ omapdss_device_enable(dssdev->next);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+}
+EXPORT_SYMBOL_GPL(omapdss_device_enable);
+
+void omapdss_device_disable(struct omap_dss_device *dssdev)
+{
+ if (!dssdev)
+ return;
+
+ omapdss_device_disable(dssdev->next);
+
+ if (dssdev->ops->disable)
+ dssdev->ops->disable(dssdev);
+}
+EXPORT_SYMBOL_GPL(omapdss_device_disable);
+
+void omapdss_device_post_disable(struct omap_dss_device *dssdev)
+{
+ if (!dssdev)
+ return;
+
+ if (dssdev->ops->post_disable)
+ dssdev->ops->post_disable(dssdev);
+
+ omapdss_device_post_disable(dssdev->next);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+EXPORT_SYMBOL_GPL(omapdss_device_post_disable);
+
/* -----------------------------------------------------------------------------
* Components Handling
*/
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 0cf3b220e35f..74e841a2b4eb 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -378,7 +378,7 @@ static void dpi_config_lcd_manager(struct dpi_data *dpi)
dss_mgr_set_lcd_config(&dpi->output, &dpi->mgr_config);
}
-static int dpi_display_enable(struct omap_dss_device *dssdev)
+static void dpi_display_enable(struct omap_dss_device *dssdev)
{
struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
struct omap_dss_device *out = &dpi->output;
@@ -420,7 +420,7 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
mutex_unlock(&dpi->lock);
- return 0;
+ return;
err_mgr_enable:
err_set_mode:
@@ -434,7 +434,6 @@ static int dpi_display_enable(struct omap_dss_device *dssdev)
regulator_disable(dpi->vdds_dsi_reg);
err_reg_enable:
mutex_unlock(&dpi->lock);
- return r;
}
static void dpi_display_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index c14f8fb2a99b..4dad2bf6b551 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -4154,10 +4154,10 @@ static void dsi_display_uninit_dsi(struct dsi_data *dsi, bool disconnect_lanes,
dsi_pll_uninit(dsi, disconnect_lanes);
}
-static int dsi_display_enable(struct omap_dss_device *dssdev)
+static void dsi_display_enable(struct omap_dss_device *dssdev)
{
struct dsi_data *dsi = to_dsi_data(dssdev);
- int r = 0;
+ int r;
DSSDBG("dsi_display_enable\n");
@@ -4177,14 +4177,13 @@ static int dsi_display_enable(struct omap_dss_device *dssdev)
mutex_unlock(&dsi->lock);
- return 0;
+ return;
err_init_dsi:
dsi_runtime_put(dsi);
err_get_dsi:
mutex_unlock(&dsi->lock);
DSSDBG("dsi_display_enable FAILED\n");
- return r;
}
static void dsi_display_disable(struct omap_dss_device *dssdev,
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c b/drivers/gpu/drm/omapdrm/dss/dss.c
index 7553c7fc1c45..55e68863ef15 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss.c
@@ -1560,7 +1560,7 @@ static void dss_shutdown(struct platform_device *pdev)
DSSDBG("shutdown\n");
- for_each_dss_display(dssdev) {
+ for_each_dss_output(dssdev) {
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
dssdev->ops->disable(dssdev);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index b6b44f07c74e..6f88fb4d6344 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -312,11 +312,11 @@ static void hdmi_stop_audio_stream(struct omap_hdmi *hd)
hdmi_wp_audio_enable(&hd->wp, false);
}
-static int hdmi_display_enable(struct omap_dss_device *dssdev)
+static void hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
unsigned long flags;
- int r = 0;
+ int r;
DSSDBG("ENTER hdmi_display_enable\n");
@@ -325,7 +325,7 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
r = hdmi_power_on_full(hdmi);
if (r) {
DSSERR("failed to power on device\n");
- goto err0;
+ goto done;
}
if (hdmi->audio_configured) {
@@ -345,12 +345,8 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
hdmi->display_enabled = true;
spin_unlock_irqrestore(&hdmi->audio_playing_lock, flags);
+done:
mutex_unlock(&hdmi->lock);
- return 0;
-
-err0:
- mutex_unlock(&hdmi->lock);
- return r;
}
static void hdmi_display_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index beef25703eab..28cf1c32b158 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -320,11 +320,11 @@ static void hdmi_stop_audio_stream(struct omap_hdmi *hd)
REG_FLD_MOD(hd->wp.base, HDMI_WP_SYSCONFIG, hd->wp_idlemode, 3, 2);
}
-static int hdmi_display_enable(struct omap_dss_device *dssdev)
+static void hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
unsigned long flags;
- int r = 0;
+ int r;
DSSDBG("ENTER hdmi_display_enable\n");
@@ -333,7 +333,7 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
r = hdmi_power_on_full(hdmi);
if (r) {
DSSERR("failed to power on device\n");
- goto err0;
+ goto done;
}
if (hdmi->audio_configured) {
@@ -353,12 +353,8 @@ static int hdmi_display_enable(struct omap_dss_device *dssdev)
hdmi->display_enabled = true;
spin_unlock_irqrestore(&hdmi->audio_playing_lock, flags);
+done:
mutex_unlock(&hdmi->lock);
- return 0;
-
-err0:
- mutex_unlock(&hdmi->lock);
- return r;
}
static void hdmi_display_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 698155dd7941..4cd3874228a5 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -359,8 +359,10 @@ struct omap_dss_device_ops {
void (*disconnect)(struct omap_dss_device *dssdev,
struct omap_dss_device *dst);
- int (*enable)(struct omap_dss_device *dssdev);
+ void (*pre_enable)(struct omap_dss_device *dssdev);
+ void (*enable)(struct omap_dss_device *dssdev);
void (*disable)(struct omap_dss_device *dssdev);
+ void (*post_disable)(struct omap_dss_device *dssdev);
int (*check_timings)(struct omap_dss_device *dssdev,
struct videomode *vm);
@@ -397,11 +399,6 @@ enum omap_dss_device_ops_flag {
OMAP_DSS_DEVICE_OP_EDID = BIT(2),
};
-enum omap_dss_device_type {
- OMAP_DSS_DEVICE_TYPE_OUTPUT = (1 << 0),
- OMAP_DSS_DEVICE_TYPE_DISPLAY = (1 << 1),
-};
-
struct omap_dss_device {
struct device *dev;
@@ -471,8 +468,6 @@ static inline bool omapdss_is_initialized(void)
return !!omapdss_get_dss();
}
-#define for_each_dss_display(d) \
- while ((d = omapdss_device_get_next(d, OMAP_DSS_DEVICE_TYPE_DISPLAY)) != NULL)
void omapdss_display_init(struct omap_dss_device *dssdev);
struct omap_dss_device *omapdss_display_get(struct omap_dss_device *output);
@@ -482,20 +477,23 @@ struct omap_dss_device *omapdss_device_get(struct omap_dss_device *dssdev);
void omapdss_device_put(struct omap_dss_device *dssdev);
struct omap_dss_device *omapdss_find_device_by_port(struct device_node *src,
unsigned int port);
-struct omap_dss_device *omapdss_device_get_next(struct omap_dss_device *from,
- enum omap_dss_device_type type);
int omapdss_device_connect(struct dss_device *dss,
struct omap_dss_device *src,
struct omap_dss_device *dst);
void omapdss_device_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst);
+void omapdss_device_pre_enable(struct omap_dss_device *dssdev);
+void omapdss_device_enable(struct omap_dss_device *dssdev);
+void omapdss_device_disable(struct omap_dss_device *dssdev);
+void omapdss_device_post_disable(struct omap_dss_device *dssdev);
int omap_dss_get_num_overlay_managers(void);
int omap_dss_get_num_overlays(void);
#define for_each_dss_output(d) \
- while ((d = omapdss_device_get_next(d, OMAP_DSS_DEVICE_TYPE_OUTPUT)) != NULL)
+ while ((d = omapdss_device_next_output(d)) != NULL)
+struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from);
int omapdss_output_validate(struct omap_dss_device *out);
typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 7de817c69913..20e88c6e3d98 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -129,7 +129,7 @@ static void sdi_config_lcd_manager(struct sdi_device *sdi)
dss_mgr_set_lcd_config(&sdi->output, &sdi->mgr_config);
}
-static int sdi_display_enable(struct omap_dss_device *dssdev)
+static void sdi_display_enable(struct omap_dss_device *dssdev)
{
struct sdi_device *sdi = dssdev_to_sdi(dssdev);
struct dispc_clock_info dispc_cinfo;
@@ -138,7 +138,7 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
r = regulator_enable(sdi->vdds_sdi_reg);
if (r)
- goto err_reg_enable;
+ return;
r = dispc_runtime_get(sdi->dss->dispc);
if (r)
@@ -180,7 +180,7 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_mgr_enable;
- return 0;
+ return;
err_mgr_enable:
dss_sdi_disable(sdi->dss);
@@ -190,8 +190,6 @@ static int sdi_display_enable(struct omap_dss_device *dssdev)
dispc_runtime_put(sdi->dss->dispc);
err_get_dispc:
regulator_disable(sdi->vdds_sdi_reg);
-err_reg_enable:
- return r;
}
static void sdi_display_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index bc9a3d52f34d..dc4133718875 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -522,25 +522,17 @@ static void venc_power_off(struct venc_device *venc)
venc_runtime_put(venc);
}
-static int venc_display_enable(struct omap_dss_device *dssdev)
+static void venc_display_enable(struct omap_dss_device *dssdev)
{
struct venc_device *venc = dssdev_to_venc(dssdev);
- int r;
DSSDBG("venc_display_enable\n");
mutex_lock(&venc->venc_lock);
- r = venc_power_on(venc);
- if (r)
- goto err0;
+ venc_power_on(venc);
mutex_unlock(&venc->venc_lock);
-
- return 0;
-err0:
- mutex_unlock(&venc->venc_lock);
- return r;
}
static void venc_display_disable(struct omap_dss_device *dssdev)
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index d14d465392dd..acdfd2176423 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -146,33 +146,60 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
static void omap_encoder_disable(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct omap_dss_device *dssdev = omap_encoder->display;
+ struct omap_dss_device *dssdev = omap_encoder->output;
struct drm_device *dev = encoder->dev;
dev_dbg(dev->dev, "disable(%s)\n", dssdev->name);
- dssdev->ops->disable(dssdev);
+ /*
+ * Disable the chain of external devices, starting at the one at the
+ * internal encoder's output.
+ */
+ omapdss_device_disable(dssdev->next);
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+ /*
+ * Disable the internal encoder. This will disable the DSS output. The
+ * DSI is treated as an exception as DSI pipelines still use the legacy
+ * flow where the pipeline output controls the encoder.
+ */
+ if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
+ dssdev->ops->disable(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+ }
+
+ /*
+ * Perform the post-disable operations on the chain of external devices
+ * to complete the display pipeline disable.
+ */
+ omapdss_device_post_disable(dssdev->next);
}
static void omap_encoder_enable(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct omap_dss_device *dssdev = omap_encoder->display;
+ struct omap_dss_device *dssdev = omap_encoder->output;
struct drm_device *dev = encoder->dev;
- int r;
dev_dbg(dev->dev, "enable(%s)\n", dssdev->name);
- r = dssdev->ops->enable(dssdev);
- if (r) {
- dev_err(dev->dev, "Failed to enable display '%s': %d\n",
- dssdev->name, r);
- return;
+ /* Prepare the chain of external devices for pipeline enable. */
+ omapdss_device_pre_enable(dssdev->next);
+
+ /*
+ * Enable the internal encoder. This will enable the DSS output. The
+ * DSI is treated as an exception as DSI pipelines still use the legacy
+ * flow where the pipeline output controls the encoder.
+ */
+ if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
+ dssdev->ops->enable(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
}
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ /*
+ * Enable the chain of external devices, starting at the one at the
+ * internal encoder's output.
+ */
+ omapdss_device_enable(dssdev->next);
}
static int omap_encoder_atomic_check(struct drm_encoder *encoder,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 14/50] drm/omap: Remove omap_dss_device dst field
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (12 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 13/50] drm/omap: Reverse direction of the DSS device enable/disable operations Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 15/50] drm/omap: Factor out common init/cleanup code for output devices Laurent Pinchart
` (35 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The field is only used in a safety check during device
connection/disconnection, where the src field can be easily used
instead. Remove it and use src.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/base.c | 6 ++----
drivers/gpu/drm/omapdrm/dss/omapdss.h | 1 -
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 916225d62cc2..76470ba45660 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -199,9 +199,8 @@ int omapdss_device_connect(struct dss_device *dss,
}
if (src) {
- WARN_ON(src->dst);
+ WARN_ON(dst->src);
dst->src = src;
- src->dst = dst;
}
return 0;
@@ -219,11 +218,10 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
}
if (src) {
- if (WARN_ON(dst != src->dst))
+ if (WARN_ON(dst->src != src))
return;
dst->src = NULL;
- src->dst = NULL;
}
WARN_ON(dst->state != OMAP_DSS_DISPLAY_DISABLED);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 4cd3874228a5..fc82b8f545ae 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -406,7 +406,6 @@ struct omap_dss_device {
struct dss_device *dss;
struct omap_dss_device *src;
- struct omap_dss_device *dst;
struct omap_dss_device *next;
struct list_head list;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 15/50] drm/omap: Factor out common init/cleanup code for output devices
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (13 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 14/50] drm/omap: Remove omap_dss_device dst field Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 16/50] drm/omap: Expose DRM modes instead of timings in display devices Laurent Pinchart
` (34 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
All the internal encoders share common init and cleanup code. Factor it
out to separate functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dpi.c | 17 +++--------------
drivers/gpu/drm/omapdrm/dss/dsi.c | 17 +++--------------
drivers/gpu/drm/omapdrm/dss/hdmi4.c | 17 +++--------------
drivers/gpu/drm/omapdrm/dss/hdmi5.c | 17 +++--------------
drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 ++-
drivers/gpu/drm/omapdrm/dss/output.c | 18 ++++++++++++++++--
drivers/gpu/drm/omapdrm/dss/sdi.c | 17 +++--------------
drivers/gpu/drm/omapdrm/dss/venc.c | 17 +++--------------
8 files changed, 36 insertions(+), 87 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 74e841a2b4eb..0db01cadf09f 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -641,19 +641,9 @@ static int dpi_init_output_port(struct dpi_data *dpi, struct device_node *port)
out->ops = &dpi_ops;
out->owner = THIS_MODULE;
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -665,9 +655,8 @@ static void dpi_uninit_output_port(struct device_node *port)
struct dpi_data *dpi = port->data;
struct omap_dss_device *out = &dpi->output;
- if (out->next)
- omapdss_device_put(out->next);
omapdss_device_unregister(out);
+ omapdss_device_cleanup_output(out);
}
static const struct soc_device_attribute dpi_soc_devices[] = {
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 4dad2bf6b551..4ac325e664b5 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -5131,19 +5131,9 @@ static int dsi_init_output(struct dsi_data *dsi)
| DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_NEGEDGE;
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -5154,9 +5144,8 @@ static void dsi_uninit_output(struct dsi_data *dsi)
{
struct omap_dss_device *out = &dsi->output;
- if (out->next)
- omapdss_device_put(out->next);
omapdss_device_unregister(out);
+ omapdss_device_cleanup_output(out);
}
static int dsi_probe_of(struct dsi_data *dsi)
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index 6f88fb4d6344..60792981a33f 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -687,19 +687,9 @@ static int hdmi4_init_output(struct omap_hdmi *hdmi)
out->of_ports = BIT(0);
out->ops_flags = OMAP_DSS_DEVICE_OP_EDID;
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -710,9 +700,8 @@ static void hdmi4_uninit_output(struct omap_hdmi *hdmi)
{
struct omap_dss_device *out = &hdmi->output;
- if (out->next)
- omapdss_device_put(out->next);
omapdss_device_unregister(out);
+ omapdss_device_cleanup_output(out);
}
static int hdmi4_probe_of(struct omap_hdmi *hdmi)
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index 28cf1c32b158..d7d33b4d2bed 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -671,19 +671,9 @@ static int hdmi5_init_output(struct omap_hdmi *hdmi)
out->of_ports = BIT(0);
out->ops_flags = OMAP_DSS_DEVICE_OP_EDID;
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -694,9 +684,8 @@ static void hdmi5_uninit_output(struct omap_hdmi *hdmi)
{
struct omap_dss_device *out = &hdmi->output;
- if (out->next)
- omapdss_device_put(out->next);
omapdss_device_unregister(out);
+ omapdss_device_cleanup_output(out);
}
static int hdmi5_probe_of(struct omap_hdmi *hdmi)
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index fc82b8f545ae..fbdeeaa521d6 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -493,7 +493,8 @@ int omap_dss_get_num_overlays(void);
#define for_each_dss_output(d) \
while ((d = omapdss_device_next_output(d)) != NULL)
struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from);
-int omapdss_output_validate(struct omap_dss_device *out);
+int omapdss_device_init_output(struct omap_dss_device *out);
+void omapdss_device_cleanup_output(struct omap_dss_device *out);
typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c
index 18505bc70f7e..0ac400a521f3 100644
--- a/drivers/gpu/drm/omapdrm/dss/output.c
+++ b/drivers/gpu/drm/omapdrm/dss/output.c
@@ -24,8 +24,15 @@
#include "dss.h"
#include "omapdss.h"
-int omapdss_output_validate(struct omap_dss_device *out)
+int omapdss_device_init_output(struct omap_dss_device *out)
{
+ out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
+ if (IS_ERR(out->next)) {
+ if (PTR_ERR(out->next) != -EPROBE_DEFER)
+ dev_err(out->dev, "failed to find video sink\n");
+ return PTR_ERR(out->next);
+ }
+
if (out->next && out->output_type != out->next->type) {
dev_err(out->dev, "output type and display type don't match\n");
return -EINVAL;
@@ -33,7 +40,14 @@ int omapdss_output_validate(struct omap_dss_device *out)
return 0;
}
-EXPORT_SYMBOL(omapdss_output_validate);
+EXPORT_SYMBOL(omapdss_device_init_output);
+
+void omapdss_device_cleanup_output(struct omap_dss_device *out)
+{
+ if (out->next)
+ omapdss_device_put(out->next);
+}
+EXPORT_SYMBOL(omapdss_device_cleanup_output);
int dss_install_mgr_ops(struct dss_device *dss,
const struct dss_mgr_ops *mgr_ops,
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 20e88c6e3d98..58c17566a4cb 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -281,19 +281,9 @@ static int sdi_init_output(struct sdi_device *sdi)
out->bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE /* 15.5.9.1.2 */
| DRM_BUS_FLAG_SYNC_POSEDGE;
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 1);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -302,9 +292,8 @@ static int sdi_init_output(struct sdi_device *sdi)
static void sdi_uninit_output(struct sdi_device *sdi)
{
- if (sdi->output.next)
- omapdss_device_put(sdi->output.next);
omapdss_device_unregister(&sdi->output);
+ omapdss_device_cleanup_output(&sdi->output);
}
int sdi_init_port(struct dss_device *dss, struct platform_device *pdev,
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index dc4133718875..3fc776c45c4f 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -752,19 +752,9 @@ static int venc_init_output(struct venc_device *venc)
out->owner = THIS_MODULE;
out->of_ports = BIT(0);
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
- }
-
- r = omapdss_output_validate(out);
- if (r) {
- omapdss_device_put(out->next);
- out->next = NULL;
+ r = omapdss_device_init_output(out);
+ if (r < 0)
return r;
- }
omapdss_device_register(out);
@@ -773,9 +763,8 @@ static int venc_init_output(struct venc_device *venc)
static void venc_uninit_output(struct venc_device *venc)
{
- if (venc->output.next)
- omapdss_device_put(venc->output.next);
omapdss_device_unregister(&venc->output);
+ omapdss_device_cleanup_output(&venc->output);
}
static int venc_probe_of(struct venc_device *venc)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 16/50] drm/omap: Expose DRM modes instead of timings in display devices
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (14 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 15/50] drm/omap: Factor out common init/cleanup code for output devices Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 17/50] drm/omap: Merge display .get_modes() and .get_size() operations Laurent Pinchart
` (33 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
omap_dss_device operations expose fixed video timings through a
.get_timings() operation that return a single timing for the device. To
prepare for the move to drm_bridge, modify the API to instead add DRM
modes directly to the connector.
As this puts more burden on display devices, we also create a helper
function for panels to add a single DRM mode from the panel video
timings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 8 ++---
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 10 +++---
.../displays/panel-lgphilips-lb035q02.c | 8 ++---
.../omapdrm/displays/panel-nec-nl8048hl11.c | 8 ++---
.../displays/panel-sharp-ls037v7dw01.c | 8 ++---
.../omapdrm/displays/panel-sony-acx565akm.c | 8 ++---
.../omapdrm/displays/panel-tpo-td028ttec1.c | 8 ++---
.../omapdrm/displays/panel-tpo-td043mtea1.c | 8 ++---
drivers/gpu/drm/omapdrm/dss/display.c | 22 +++++++++++++
drivers/gpu/drm/omapdrm/dss/omapdss.h | 8 +++--
drivers/gpu/drm/omapdrm/dss/venc.c | 12 ++++---
drivers/gpu/drm/omapdrm/omap_connector.c | 33 ++++++-------------
12 files changed, 80 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index eee44d9ea0c3..d6a584292e91 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -68,12 +68,12 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
regulator_disable(ddata->vcc_supply);
}
-static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int panel_dpi_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops panel_dpi_ops = {
@@ -83,7 +83,7 @@ static const struct omap_dss_device_ops panel_dpi_ops = {
.enable = panel_dpi_enable,
.disable = panel_dpi_disable,
- .get_timings = panel_dpi_get_timings,
+ .get_modes = panel_dpi_get_modes,
};
static int panel_dpi_probe_of(struct platform_device *pdev)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index ffbf20e6ebe9..9cd9ab487a24 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -24,6 +24,8 @@
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
+#include <drm/drm_connector.h>
+
#include <video/mipi_display.h>
#include <video/of_display_timing.h>
@@ -1110,12 +1112,12 @@ static void dsicm_ulps_work(struct work_struct *work)
mutex_unlock(&ddata->lock);
}
-static void dsicm_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int dsicm_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static int dsicm_check_timings(struct omap_dss_device *dssdev,
@@ -1156,7 +1158,7 @@ static const struct omap_dss_device_ops dsicm_ops = {
.enable = dsicm_enable,
.disable = dsicm_disable,
- .get_timings = dsicm_get_timings,
+ .get_modes = dsicm_get_modes,
.check_timings = dsicm_check_timings,
};
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index e043cab0a0c9..e05b7f80416e 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -139,12 +139,12 @@ static void lb035q02_disable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
}
-static void lb035q02_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int lb035q02_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops lb035q02_ops = {
@@ -154,7 +154,7 @@ static const struct omap_dss_device_ops lb035q02_ops = {
.enable = lb035q02_enable,
.disable = lb035q02_disable,
- .get_timings = lb035q02_get_timings,
+ .get_modes = lb035q02_get_modes,
};
static int lb035q02_probe_of(struct spi_device *spi)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index 44fd6134317d..cf2127837e67 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -132,12 +132,12 @@ static void nec_8048_disable(struct omap_dss_device *dssdev)
gpiod_set_value_cansleep(ddata->res_gpio, 0);
}
-static void nec_8048_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int nec_8048_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops nec_8048_ops = {
@@ -147,7 +147,7 @@ static const struct omap_dss_device_ops nec_8048_ops = {
.enable = nec_8048_enable,
.disable = nec_8048_disable,
- .get_timings = nec_8048_get_timings,
+ .get_modes = nec_8048_get_modes,
};
static int nec_8048_probe(struct spi_device *spi)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 907abf8ef4e6..30320cee1e56 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -111,12 +111,12 @@ static void sharp_ls_post_disable(struct omap_dss_device *dssdev)
regulator_disable(ddata->vcc);
}
-static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int sharp_ls_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops sharp_ls_ops = {
@@ -128,7 +128,7 @@ static const struct omap_dss_device_ops sharp_ls_ops = {
.disable = sharp_ls_disable,
.post_disable = sharp_ls_post_disable,
- .get_timings = sharp_ls_get_timings,
+ .get_modes = sharp_ls_get_modes,
};
static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index eeaea752f171..8debe77f92ff 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -596,12 +596,12 @@ static void acx565akm_disable(struct omap_dss_device *dssdev)
mutex_unlock(&ddata->mutex);
}
-static void acx565akm_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int acx565akm_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops acx565akm_ops = {
@@ -611,7 +611,7 @@ static const struct omap_dss_device_ops acx565akm_ops = {
.enable = acx565akm_enable,
.disable = acx565akm_disable,
- .get_timings = acx565akm_get_timings,
+ .get_modes = acx565akm_get_modes,
};
static int acx565akm_probe(struct spi_device *spi)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index f1a5c14407a4..c8b15f19a166 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -272,12 +272,12 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
}
-static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int td028ttec1_panel_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops td028ttec1_ops = {
@@ -287,7 +287,7 @@ static const struct omap_dss_device_ops td028ttec1_ops = {
.enable = td028ttec1_panel_enable,
.disable = td028ttec1_panel_disable,
- .get_timings = td028ttec1_panel_get_timings,
+ .get_modes = td028ttec1_panel_get_modes,
};
static int td028ttec1_panel_probe(struct spi_device *spi)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 996a16736d10..9ecc4c7bee67 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -347,12 +347,12 @@ static void tpo_td043_disable(struct omap_dss_device *dssdev)
tpo_td043_power_off(ddata);
}
-static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int tpo_td043_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- *vm = ddata->vm;
+ return omapdss_display_get_modes(connector, &ddata->vm);
}
static const struct omap_dss_device_ops tpo_td043_ops = {
@@ -362,7 +362,7 @@ static const struct omap_dss_device_ops tpo_td043_ops = {
.enable = tpo_td043_enable,
.disable = tpo_td043_disable,
- .get_timings = tpo_td043_get_timings,
+ .get_modes = tpo_td043_get_modes,
};
static int tpo_td043_probe(struct spi_device *spi)
diff --git a/drivers/gpu/drm/omapdrm/dss/display.c b/drivers/gpu/drm/omapdrm/dss/display.c
index 34b2a4ef63a4..398964358386 100644
--- a/drivers/gpu/drm/omapdrm/dss/display.c
+++ b/drivers/gpu/drm/omapdrm/dss/display.c
@@ -23,6 +23,9 @@
#include <linux/kernel.h>
#include <linux/of.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_modes.h>
+
#include "omapdss.h"
static int disp_num_counter;
@@ -58,3 +61,22 @@ struct omap_dss_device *omapdss_display_get(struct omap_dss_device *output)
return omapdss_device_get(output);
}
EXPORT_SYMBOL_GPL(omapdss_display_get);
+
+int omapdss_display_get_modes(struct drm_connector *connector,
+ const struct videomode *vm)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_create(connector->dev);
+ if (!mode)
+ return 0;
+
+ drm_display_mode_from_videomode(vm, mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(omapdss_display_get_modes);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index fbdeeaa521d6..88fa61ddc959 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -67,6 +67,7 @@ struct dss_lcd_mgr_config;
struct snd_aes_iec958;
struct snd_cea_861_aud_if;
struct hdmi_avi_infoframe;
+struct drm_connector;
enum omap_display_type {
OMAP_DISPLAY_TYPE_NONE = 0,
@@ -366,8 +367,6 @@ struct omap_dss_device_ops {
int (*check_timings)(struct omap_dss_device *dssdev,
struct videomode *vm);
- void (*get_timings)(struct omap_dss_device *dssdev,
- struct videomode *vm);
void (*set_timings)(struct omap_dss_device *dssdev,
const struct videomode *vm);
@@ -381,6 +380,9 @@ struct omap_dss_device_ops {
int (*read_edid)(struct omap_dss_device *dssdev, u8 *buf, int len);
+ int (*get_modes)(struct omap_dss_device *dssdev,
+ struct drm_connector *connector);
+
union {
const struct omapdss_hdmi_ops hdmi;
const struct omapdss_dsi_ops dsi;
@@ -469,6 +471,8 @@ static inline bool omapdss_is_initialized(void)
void omapdss_display_init(struct omap_dss_device *dssdev);
struct omap_dss_device *omapdss_display_get(struct omap_dss_device *output);
+int omapdss_display_get_modes(struct drm_connector *connector,
+ const struct videomode *vm);
void omapdss_device_register(struct omap_dss_device *dssdev);
void omapdss_device_unregister(struct omap_dss_device *dssdev);
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index 3fc776c45c4f..cefefe6d6fcb 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -548,14 +548,17 @@ static void venc_display_disable(struct omap_dss_device *dssdev)
mutex_unlock(&venc->venc_lock);
}
-static void venc_get_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+static int venc_get_modes(struct omap_dss_device *dssdev,
+ struct drm_connector *connector)
{
struct venc_device *venc = dssdev_to_venc(dssdev);
+ int r;
mutex_lock(&venc->venc_lock);
- *vm = venc->vm;
+ r = omapdss_display_get_modes(connector, &venc->vm);
mutex_unlock(&venc->venc_lock);
+
+ return r;
}
static void venc_set_timings(struct omap_dss_device *dssdev,
@@ -690,8 +693,9 @@ static const struct omap_dss_device_ops venc_ops = {
.disable = venc_display_disable,
.check_timings = venc_check_timings,
- .get_timings = venc_get_timings,
.set_timings = venc_set_timings,
+
+ .get_modes = venc_get_modes,
};
/* -----------------------------------------------------------------------------
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 9da94d10782a..8d9197eebb53 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -212,8 +212,6 @@ static int omap_connector_get_modes(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
- struct drm_display_mode *mode;
- struct videomode vm = {0};
DBG("%s", omap_connector->display->name);
@@ -238,31 +236,20 @@ static int omap_connector_get_modes(struct drm_connector *connector)
&connector->display_info.height_mm);
/*
- * Iterate over the pipeline to find the first device that can provide
- * timing information. If we can't find any, we just let the KMS core
- * add the default modes.
+ * If the display pipeline reports modes (e.g. with a fixed resolution
+ * panel or an analog TV output), query it.
*/
for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
- if (dssdev->ops->get_timings)
- break;
+ if (dssdev->ops->get_modes)
+ return dssdev->ops->get_modes(dssdev, connector);
}
- if (!dssdev)
- return 0;
- /* Add a single mode corresponding to the fixed panel timings. */
- mode = drm_mode_create(connector->dev);
- if (!mode)
- return 0;
-
- dssdev->ops->get_timings(dssdev, &vm);
-
- drm_display_mode_from_videomode(&vm, mode);
-
- mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
- drm_mode_set_name(mode);
- drm_mode_probed_add(connector, mode);
-
- return 1;
+ /*
+ * We can't retrieve modes, which can happen for instance for a DVI or
+ * VGA output with the DDC bus unconnected. The KMS core will add the
+ * default modes.
+ */
+ return 0;
}
static int omap_connector_mode_valid(struct drm_connector *connector,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 17/50] drm/omap: Merge display .get_modes() and .get_size() operations
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (15 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 16/50] drm/omap: Expose DRM modes instead of timings in display devices Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 18/50] drm/omap: Add a dss device operation flag for .get_modes() Laurent Pinchart
` (32 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Now that the .get_modes() operations takes a drm_connector and fills it
with modes, it becomes easy to fill display information in the same
operation without requiring a separate .get_size() opearation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 14 +++-----------
drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 ---
drivers/gpu/drm/omapdrm/omap_connector.c | 15 ++-------------
3 files changed, 5 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 9cd9ab487a24..c5f570106a17 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -1117,6 +1117,9 @@ static int dsicm_get_modes(struct omap_dss_device *dssdev,
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
+ connector->display_info.width_mm = ddata->width_mm;
+ connector->display_info.height_mm = ddata->height_mm;
+
return omapdss_display_get_modes(connector, &ddata->vm);
}
@@ -1142,15 +1145,6 @@ static int dsicm_check_timings(struct omap_dss_device *dssdev,
return ret;
}
-static void dsicm_get_size(struct omap_dss_device *dssdev,
- unsigned int *width, unsigned int *height)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- *width = ddata->width_mm;
- *height = ddata->height_mm;
-}
-
static const struct omap_dss_device_ops dsicm_ops = {
.connect = dsicm_connect,
.disconnect = dsicm_disconnect,
@@ -1166,8 +1160,6 @@ static const struct omap_dss_driver dsicm_dss_driver = {
.update = dsicm_update,
.sync = dsicm_sync,
- .get_size = dsicm_get_size,
-
.enable_te = dsicm_enable_te,
.get_te = dsicm_get_te,
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 88fa61ddc959..7637fc041b71 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -457,9 +457,6 @@ struct omap_dss_driver {
int (*memory_read)(struct omap_dss_device *dssdev,
void *buf, size_t size,
u16 x, u16 y, u16 w, u16 h);
-
- void (*get_size)(struct omap_dss_device *dssdev,
- unsigned int *width, unsigned int *height);
};
struct dss_device *omapdss_get_dss(void);
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 8d9197eebb53..c0157554c12f 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -225,19 +225,8 @@ static int omap_connector_get_modes(struct drm_connector *connector)
return omap_connector_get_modes_edid(connector, dssdev);
/*
- * Otherwise we have either a fixed resolution panel or an output that
- * doesn't support modes discovery (e.g. DVI or VGA with the DDC bus
- * unconnected, or analog TV). Start by querying the size.
- */
- dssdev = omap_connector->display;
- if (dssdev->driver && dssdev->driver->get_size)
- dssdev->driver->get_size(dssdev,
- &connector->display_info.width_mm,
- &connector->display_info.height_mm);
-
- /*
- * If the display pipeline reports modes (e.g. with a fixed resolution
- * panel or an analog TV output), query it.
+ * Otherwise if the display pipeline reports modes (e.g. with a fixed
+ * resolution panel or an analog TV output), query it.
*/
for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
if (dssdev->ops->get_modes)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 18/50] drm/omap: Add a dss device operation flag for .get_modes()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (16 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 17/50] drm/omap: Merge display .get_modes() and .get_size() operations Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 19/50] drm/omap: venc: List both PAL and NTSC modes Laurent Pinchart
` (31 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Instead of manually iterating over the dss devices in the pipeline to
find the first one that implements the .get_modes() operation, add a new
operation flag for .get_modes() and use the omap_connector_find_device()
helper function to locate the right dss device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 1 +
.../gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c | 1 +
.../gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c | 1 +
drivers/gpu/drm/omapdrm/dss/omapdss.h | 4 +++-
drivers/gpu/drm/omapdrm/dss/venc.c | 1 +
drivers/gpu/drm/omapdrm/omap_connector.c | 8 ++++----
11 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index d6a584292e91..897b8820e000 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -152,6 +152,7 @@ static int panel_dpi_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
drm_bus_flags_from_videomode(&ddata->vm, &dssdev->bus_flags);
omapdss_display_init(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index c5f570106a17..fe9d9f847d2e 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -1271,6 +1271,7 @@ static int dsicm_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DSI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index e05b7f80416e..f37931bf1c5f 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -199,6 +199,7 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index cf2127837e67..8f2fb3d0492f 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -194,6 +194,7 @@ static int nec_8048_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 30320cee1e56..8d5d7f775b55 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -209,6 +209,7 @@ static int sharp_ls_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index 8debe77f92ff..b8360cef3754 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -708,6 +708,7 @@ static int acx565akm_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_SDI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
| DRM_BUS_FLAG_PIXDATA_POSEDGE;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index c8b15f19a166..721c5bb3bdef 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -323,6 +323,7 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 9ecc4c7bee67..50960018dbe8 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -422,6 +422,7 @@ static int tpo_td043_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
+ dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
/*
* Note: According to the panel documentation:
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 7637fc041b71..01da7e94b974 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -393,12 +393,14 @@ struct omap_dss_device_ops {
* enum omap_dss_device_ops_flag - Indicates which device ops are supported
* @OMAP_DSS_DEVICE_OP_DETECT: The device supports output connection detection
* @OMAP_DSS_DEVICE_OP_HPD: The device supports all hot-plug-related operations
- * @OMAP_DSS_DEVICE_OP_EDID: The device supports readind EDID
+ * @OMAP_DSS_DEVICE_OP_EDID: The device supports reading EDID
+ * @OMAP_DSS_DEVICE_OP_MODES: The device supports reading modes
*/
enum omap_dss_device_ops_flag {
OMAP_DSS_DEVICE_OP_DETECT = BIT(0),
OMAP_DSS_DEVICE_OP_HPD = BIT(1),
OMAP_DSS_DEVICE_OP_EDID = BIT(2),
+ OMAP_DSS_DEVICE_OP_MODES = BIT(3),
};
struct omap_dss_device {
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index cefefe6d6fcb..f1abb4195a76 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -755,6 +755,7 @@ static int venc_init_output(struct venc_device *venc)
out->ops = &venc_ops;
out->owner = THIS_MODULE;
out->of_ports = BIT(0);
+ out->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
r = omapdss_device_init_output(out);
if (r < 0)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index c0157554c12f..dc4533c8cbb4 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -228,10 +228,10 @@ static int omap_connector_get_modes(struct drm_connector *connector)
* Otherwise if the display pipeline reports modes (e.g. with a fixed
* resolution panel or an analog TV output), query it.
*/
- for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
- if (dssdev->ops->get_modes)
- return dssdev->ops->get_modes(dssdev, connector);
- }
+ dssdev = omap_connector_find_device(connector,
+ OMAP_DSS_DEVICE_OP_MODES);
+ if (dssdev)
+ return dssdev->ops->get_modes(dssdev, connector);
/*
* We can't retrieve modes, which can happen for instance for a DVI or
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 19/50] drm/omap: venc: List both PAL and NTSC modes
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (17 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 18/50] drm/omap: Add a dss device operation flag for .get_modes() Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 20/50] drm/omap: Don't pass display pointer to encoder init function Laurent Pinchart
` (30 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The TV encoder supports both PAL and NTSC modes, but when queried for
the list of modes it supports, only the currently selected mode is
reported. Fix it and report the two modes unconditionally.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/venc.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index f1abb4195a76..638cfd69ccf6 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -551,14 +551,27 @@ static void venc_display_disable(struct omap_dss_device *dssdev)
static int venc_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
- struct venc_device *venc = dssdev_to_venc(dssdev);
- int r;
+ static const struct videomode *modes[] = {
+ &omap_dss_pal_vm,
+ &omap_dss_ntsc_vm,
+ };
+ unsigned int i;
- mutex_lock(&venc->venc_lock);
- r = omapdss_display_get_modes(connector, &venc->vm);
- mutex_unlock(&venc->venc_lock);
+ for (i = 0; i < ARRAY_SIZE(modes); ++i) {
+ struct drm_display_mode *mode;
- return r;
+ mode = drm_mode_create(connector->dev);
+ if (!mode)
+ return i;
+
+ drm_display_mode_from_videomode(modes[i], mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return ARRAY_SIZE(modes);
}
static void venc_set_timings(struct omap_dss_device *dssdev,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 20/50] drm/omap: Don't pass display pointer to encoder init function
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (18 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 19/50] drm/omap: venc: List both PAL and NTSC modes Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 21/50] drm/omap: Move display alias ID to omap_drm_pipeline Laurent Pinchart
` (29 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The display isn't used by the encoder implementation, don't pass it to
the initialization function and store it internally needlessly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 2 +-
drivers/gpu/drm/omapdrm/omap_encoder.c | 5 +----
drivers/gpu/drm/omapdrm/omap_encoder.h | 3 +--
3 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index bddd4c1c43ae..3b8f0fdf24a8 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -296,7 +296,7 @@ static int omap_modeset_init(struct drm_device *dev)
struct drm_encoder *encoder;
struct drm_crtc *crtc;
- encoder = omap_encoder_init(dev, pipe->output, display);
+ encoder = omap_encoder_init(dev, pipe->output);
if (!encoder)
return -ENOMEM;
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index acdfd2176423..1f4172f653b9 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -37,7 +37,6 @@
struct omap_encoder {
struct drm_encoder base;
struct omap_dss_device *output;
- struct omap_dss_device *display;
};
static void omap_encoder_destroy(struct drm_encoder *encoder)
@@ -247,8 +246,7 @@ static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
/* initialize encoder */
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
- struct omap_dss_device *output,
- struct omap_dss_device *display)
+ struct omap_dss_device *output)
{
struct drm_encoder *encoder = NULL;
struct omap_encoder *omap_encoder;
@@ -258,7 +256,6 @@ struct drm_encoder *omap_encoder_init(struct drm_device *dev,
goto fail;
omap_encoder->output = output;
- omap_encoder->display = display;
encoder = &omap_encoder->base;
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.h b/drivers/gpu/drm/omapdrm/omap_encoder.h
index a7b5dde63ecb..4aefb3142886 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.h
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.h
@@ -25,7 +25,6 @@ struct drm_encoder;
struct omap_dss_device;
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
- struct omap_dss_device *output,
- struct omap_dss_device *display);
+ struct omap_dss_device *output);
#endif /* __OMAPDRM_ENCODER_H__ */
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 21/50] drm/omap: Move display alias ID to omap_drm_pipeline
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (19 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 20/50] drm/omap: Don't pass display pointer to encoder init function Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 22/50] drm/omap: Don't store display pointer in omap_connector structure Laurent Pinchart
` (28 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The DT bindings for the OMAP DSS allow assigning numerical IDs to
display outputs through display entries in the alias node. The driver
uses this information to sort pipelines according to the order specified
in DT, making it possible for a system to give a priority order to
outputs.
Retrieval of the alias ID is done when initializing display dss devices.
That code will be removed when moving to drm_bridge and drm_panel. Move
retrieval of the alias ID to display pipeline connection time and store
it in the pipeline structure instead to keep the feature.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/display.c | 2 --
drivers/gpu/drm/omapdrm/dss/omapdss.h | 2 --
drivers/gpu/drm/omapdrm/omap_drv.c | 9 +++++++--
drivers/gpu/drm/omapdrm/omap_drv.h | 1 +
4 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/display.c b/drivers/gpu/drm/omapdrm/dss/display.c
index 398964358386..e93f61a567a8 100644
--- a/drivers/gpu/drm/omapdrm/dss/display.c
+++ b/drivers/gpu/drm/omapdrm/dss/display.c
@@ -42,8 +42,6 @@ void omapdss_display_init(struct omap_dss_device *dssdev)
if (id < 0)
id = disp_num_counter++;
- dssdev->alias_id = id;
-
/* Use 'label' property for name, if it exists */
of_property_read_string(dssdev->dev->of_node, "label", &dssdev->name);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 01da7e94b974..dd93c2121a35 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -414,8 +414,6 @@ struct omap_dss_device {
struct list_head list;
- unsigned int alias_id;
-
enum omap_display_type type;
/*
* DSS output type that this device generates (for DSS internal devices)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 3b8f0fdf24a8..008eec6356fd 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -155,9 +155,9 @@ static int omap_compare_pipes(const void *a, const void *b)
const struct omap_drm_pipeline *pipe1 = a;
const struct omap_drm_pipeline *pipe2 = b;
- if (pipe1->display->alias_id > pipe2->display->alias_id)
+ if (pipe1->alias_id > pipe2->alias_id)
return 1;
- else if (pipe1->display->alias_id < pipe2->display->alias_id)
+ else if (pipe1->alias_id < pipe2->alias_id)
return -1;
return 0;
}
@@ -182,11 +182,16 @@ static int omap_connect_pipelines(struct drm_device *ddev)
output->name);
} else {
struct omap_drm_pipeline *pipe;
+ int id;
pipe = &priv->pipes[priv->num_pipes++];
pipe->output = omapdss_device_get(output);
pipe->display = omapdss_display_get(output);
+ id = of_alias_get_id(pipe->display->dev->of_node,
+ "display");
+ pipe->alias_id = id >= 0 ? id : priv->num_pipes - 1;
+
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
/* To balance the 'for_each_dss_output' loop */
omapdss_device_put(output);
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 0c57d2814c51..ebff86595167 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -50,6 +50,7 @@ struct omap_drm_pipeline {
struct drm_connector *connector;
struct omap_dss_device *output;
struct omap_dss_device *display;
+ unsigned int alias_id;
};
struct omap_drm_private {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 22/50] drm/omap: Don't store display pointer in omap_connector structure
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (20 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 21/50] drm/omap: Move display alias ID to omap_drm_pipeline Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 23/50] drm/omap: panel-dsi-cm: Store source pointer internally Laurent Pinchart
` (27 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Display pipelines based on drm_bridge are handled from the bridge
closest to the CRTC. To move to that model we thus need to transition
away from walking pipelines in the other direction, and from accessing
the device at the end of the pipeline when possible.
Remove most accesses to the display device from the omap_connector
implementation, and don't store it in the omap_connector structure.
- For debug messages we can simply use the connector name instead.
- For type checks we can use the drm_connector type.
- For operation lookup we can start at the other end of the pipeline and
locate the last matching device.
The display device is still passed to the connector init function in
order to find its type, which requires access to the end of the
pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/omap_connector.c | 31 ++++++++++--------------
1 file changed, 13 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index dc4533c8cbb4..6f219f61a783 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -30,7 +30,6 @@
struct omap_connector {
struct drm_connector base;
struct omap_dss_device *output;
- struct omap_dss_device *display;
struct omap_dss_device *hpd;
bool hdmi_mode;
};
@@ -103,20 +102,20 @@ omap_connector_find_device(struct drm_connector *connector,
enum omap_dss_device_ops_flag op)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev;
+ struct omap_dss_device *dssdev = NULL;
+ struct omap_dss_device *d;
- for (dssdev = omap_connector->display; dssdev; dssdev = dssdev->src) {
- if (dssdev->ops_flags & op)
- return dssdev;
+ for (d = omap_connector->output; d; d = d->next) {
+ if (d->ops_flags & op)
+ dssdev = d;
}
- return NULL;
+ return dssdev;
}
static enum drm_connector_status omap_connector_detect(
struct drm_connector *connector, bool force)
{
- struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
enum drm_connector_status status;
@@ -130,11 +129,10 @@ static enum drm_connector_status omap_connector_detect(
omap_connector_hpd_notify(connector, dssdev->src, status);
} else {
- switch (omap_connector->display->type) {
- case OMAP_DISPLAY_TYPE_DPI:
- case OMAP_DISPLAY_TYPE_DBI:
- case OMAP_DISPLAY_TYPE_SDI:
- case OMAP_DISPLAY_TYPE_DSI:
+ switch (connector->connector_type) {
+ case DRM_MODE_CONNECTOR_DPI:
+ case DRM_MODE_CONNECTOR_LVDS:
+ case DRM_MODE_CONNECTOR_DSI:
status = connector_status_connected;
break;
default:
@@ -143,7 +141,7 @@ static enum drm_connector_status omap_connector_detect(
}
}
- VERB("%s: %d (force=%d)", omap_connector->display->name, status, force);
+ VERB("%s: %d (force=%d)", connector->name, status, force);
return status;
}
@@ -152,7 +150,7 @@ static void omap_connector_destroy(struct drm_connector *connector)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
- DBG("%s", omap_connector->display->name);
+ DBG("%s", connector->name);
if (omap_connector->hpd) {
struct omap_dss_device *hpd = omap_connector->hpd;
@@ -166,7 +164,6 @@ static void omap_connector_destroy(struct drm_connector *connector)
drm_connector_cleanup(connector);
omapdss_device_put(omap_connector->output);
- omapdss_device_put(omap_connector->display);
kfree(omap_connector);
}
@@ -210,10 +207,9 @@ static int omap_connector_get_modes_edid(struct drm_connector *connector,
static int omap_connector_get_modes(struct drm_connector *connector)
{
- struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
- DBG("%s", omap_connector->display->name);
+ DBG("%s", connector->name);
/*
* If display exposes EDID, then we parse that in the normal way to
@@ -341,7 +337,6 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
goto fail;
omap_connector->output = omapdss_device_get(output);
- omap_connector->display = omapdss_device_get(display);
connector = &omap_connector->base;
connector->interlace_allowed = 1;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 23/50] drm/omap: panel-dsi-cm: Store source pointer internally
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (21 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 22/50] drm/omap: Don't store display pointer in omap_connector structure Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 24/50] drm/omap: Notify all devices in the pipeline of output disconnection Laurent Pinchart
` (26 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The source pointer will be removed to the omap_dss_device structure.
Store it internally in the DSI panel driver data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 55 ++++++++++---------
1 file changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index fe9d9f847d2e..ce812094177c 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -43,6 +43,7 @@
struct panel_drv_data {
struct omap_dss_device dssdev;
+ struct omap_dss_device *src;
struct videomode vm;
@@ -143,7 +144,7 @@ static void hw_guard_wait(struct panel_drv_data *ddata)
static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
u8 buf[1];
@@ -159,14 +160,14 @@ static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
return src->ops->dsi.dcs_write(src, ddata->channel, &dcs_cmd, 1);
}
static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
u8 buf[2] = { dcs_cmd, param };
return src->ops->dsi.dcs_write(src, ddata->channel, buf, 2);
@@ -175,7 +176,7 @@ static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
static int dsicm_sleep_in(struct panel_drv_data *ddata)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
u8 cmd;
int r;
@@ -230,7 +231,7 @@ static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
static int dsicm_set_update_window(struct panel_drv_data *ddata,
u16 x, u16 y, u16 w, u16 h)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
u16 x1 = x;
u16 x2 = x + w - 1;
@@ -277,7 +278,7 @@ static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
static int dsicm_enter_ulps(struct panel_drv_data *ddata)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
if (ddata->ulps_enabled)
@@ -311,7 +312,7 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
static int dsicm_exit_ulps(struct panel_drv_data *ddata)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
if (!ddata->ulps_enabled)
@@ -363,7 +364,7 @@ static int dsicm_wake_up(struct panel_drv_data *ddata)
static int dsicm_bl_update_status(struct backlight_device *dev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r = 0;
int level;
@@ -411,7 +412,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev,
{
struct platform_device *pdev = to_platform_device(dev);
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
u8 errors = 0;
int r;
@@ -443,7 +444,7 @@ static ssize_t dsicm_hw_revision_show(struct device *dev,
{
struct platform_device *pdev = to_platform_device(dev);
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
u8 id1, id2, id3;
int r;
@@ -475,7 +476,7 @@ static ssize_t dsicm_store_ulps(struct device *dev,
{
struct platform_device *pdev = to_platform_device(dev);
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
unsigned long t;
int r;
@@ -525,7 +526,7 @@ static ssize_t dsicm_store_ulps_timeout(struct device *dev,
{
struct platform_device *pdev = to_platform_device(dev);
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
unsigned long t;
int r;
@@ -600,7 +601,7 @@ static void dsicm_hw_reset(struct panel_drv_data *ddata)
static int dsicm_power_on(struct panel_drv_data *ddata)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
u8 id1, id2, id3;
int r;
struct omap_dss_dsi_config dsi_config = {
@@ -715,7 +716,7 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
static void dsicm_power_off(struct panel_drv_data *ddata)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
src->ops->dsi.disable_video_output(src, ddata->channel);
@@ -769,6 +770,7 @@ static int dsicm_connect(struct omap_dss_device *src,
return r;
}
+ ddata->src = src;
return 0;
}
@@ -778,12 +780,13 @@ static void dsicm_disconnect(struct omap_dss_device *src,
struct panel_drv_data *ddata = to_panel_data(dst);
src->ops->dsi.release_vc(src, ddata->channel);
+ ddata->src = NULL;
}
static void dsicm_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
int r;
mutex_lock(&ddata->lock);
@@ -810,7 +813,7 @@ static void dsicm_enable(struct omap_dss_device *dssdev)
static void dsicm_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
int r;
dsicm_bl_power(ddata, false);
@@ -833,7 +836,7 @@ static void dsicm_disable(struct omap_dss_device *dssdev)
static void dsicm_framedone_cb(int err, void *data)
{
struct panel_drv_data *ddata = data;
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
src->ops->dsi.bus_unlock(src);
@@ -842,7 +845,7 @@ static void dsicm_framedone_cb(int err, void *data)
static irqreturn_t dsicm_te_isr(int irq, void *data)
{
struct panel_drv_data *ddata = data;
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int old;
int r;
@@ -868,7 +871,7 @@ static void dsicm_te_timeout_work_callback(struct work_struct *work)
{
struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
te_timeout_work.work);
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
@@ -880,7 +883,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
int r;
dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -926,7 +929,7 @@ static int dsicm_update(struct omap_dss_device *dssdev,
static int dsicm_sync(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
dev_dbg(&ddata->pdev->dev, "sync\n");
@@ -942,7 +945,7 @@ static int dsicm_sync(struct omap_dss_device *dssdev)
static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
{
- struct omap_dss_device *src = ddata->dssdev.src;
+ struct omap_dss_device *src = ddata->src;
int r;
if (enable)
@@ -962,7 +965,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
int r;
mutex_lock(&ddata->lock);
@@ -1013,7 +1016,7 @@ static int dsicm_memory_read(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
int r;
int first = 1;
int plen;
@@ -1095,7 +1098,7 @@ static void dsicm_ulps_work(struct work_struct *work)
struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
ulps_work.work);
struct omap_dss_device *dssdev = &ddata->dssdev;
- struct omap_dss_device *src = dssdev->src;
+ struct omap_dss_device *src = ddata->src;
mutex_lock(&ddata->lock);
@@ -1352,7 +1355,7 @@ static int __exit dsicm_remove(struct platform_device *pdev)
if (omapdss_device_is_enabled(dssdev))
dsicm_disable(dssdev);
- omapdss_device_disconnect(dssdev->src, dssdev);
+ omapdss_device_disconnect(ddata->src, dssdev);
sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 24/50] drm/omap: Notify all devices in the pipeline of output disconnection
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (22 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 23/50] drm/omap: panel-dsi-cm: Store source pointer internally Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 25/50] drm/omap: Remove src field from omap_dss_device structure Laurent Pinchart
` (25 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
For HDMI pipelines, when the output gets disconnected the device
handling CEC needs to be notified. Instead of guessing which device that
would be (and sometimes getting it wrong), notify all devices in the
pipeline.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/omap_connector.c | 28 ++++++++++++++----------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 6f219f61a783..e01e4cf61ae1 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -35,18 +35,22 @@ struct omap_connector {
};
static void omap_connector_hpd_notify(struct drm_connector *connector,
- struct omap_dss_device *src,
enum drm_connector_status status)
{
- if (status == connector_status_disconnected) {
- /*
- * If the source is an HDMI encoder, notify it of disconnection.
- * This is required to let the HDMI encoder reset any internal
- * state related to connection status, such as the CEC address.
- */
- if (src && src->type == OMAP_DISPLAY_TYPE_HDMI &&
- src->ops->hdmi.lost_hotplug)
- src->ops->hdmi.lost_hotplug(src);
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct omap_dss_device *dssdev;
+
+ if (status != connector_status_disconnected)
+ return;
+
+ /*
+ * Notify all devics in the pipeline of disconnection. This is required
+ * to let the HDMI encoders reset their internal state related to
+ * connection status, such as the CEC address.
+ */
+ for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
+ if (dssdev->ops && dssdev->ops->hdmi.lost_hotplug)
+ dssdev->ops->hdmi.lost_hotplug(dssdev);
}
}
@@ -66,7 +70,7 @@ static void omap_connector_hpd_cb(void *cb_data,
if (old_status == status)
return;
- omap_connector_hpd_notify(connector, omap_connector->hpd, status);
+ omap_connector_hpd_notify(connector, status);
drm_kms_helper_hotplug_event(dev);
}
@@ -127,7 +131,7 @@ static enum drm_connector_status omap_connector_detect(
? connector_status_connected
: connector_status_disconnected;
- omap_connector_hpd_notify(connector, dssdev->src, status);
+ omap_connector_hpd_notify(connector, status);
} else {
switch (connector->connector_type) {
case DRM_MODE_CONNECTOR_DPI:
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 25/50] drm/omap: Remove src field from omap_dss_device structure
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (23 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 24/50] drm/omap: Notify all devices in the pipeline of output disconnection Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 26/50] drm/omap: Move DISPC timing checks to CRTC .mode_valid() operation Laurent Pinchart
` (24 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The field is only used to check whether the device is connected, and we
can do so by checking the dss field instead. Remove the src field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/base.c | 14 +-------------
drivers/gpu/drm/omapdrm/dss/omapdss.h | 1 -
2 files changed, 1 insertion(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 76470ba45660..62ccbeb99a84 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -176,7 +176,7 @@ EXPORT_SYMBOL(omapdss_device_next_output);
static bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
{
- return dssdev->src;
+ return dssdev->dss;
}
int omapdss_device_connect(struct dss_device *dss,
@@ -198,11 +198,6 @@ int omapdss_device_connect(struct dss_device *dss,
return ret;
}
- if (src) {
- WARN_ON(dst->src);
- dst->src = src;
- }
-
return 0;
}
EXPORT_SYMBOL_GPL(omapdss_device_connect);
@@ -217,13 +212,6 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
return;
}
- if (src) {
- if (WARN_ON(dst->src != src))
- return;
-
- dst->src = NULL;
- }
-
WARN_ON(dst->state != OMAP_DSS_DISPLAY_DISABLED);
dst->ops->disconnect(src, dst);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index dd93c2121a35..015b2dd9fb99 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -409,7 +409,6 @@ struct omap_dss_device {
struct module *owner;
struct dss_device *dss;
- struct omap_dss_device *src;
struct omap_dss_device *next;
struct list_head list;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 26/50] drm/omap: Move DISPC timing checks to CRTC .mode_valid() operation
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (24 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 25/50] drm/omap: Remove src field from omap_dss_device structure Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 27/50] drm/omap: venc: Simplify mode setting by caching configuration Laurent Pinchart
` (23 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The DISPC timings checks relate to the CRTC, but they're performed in
the encoder and connector .atomic_check() and .mode_valid() operations.
Move them to the CRTC .mode_valid() operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/omap_connector.c | 6 ------
drivers/gpu/drm/omapdrm/omap_crtc.c | 9 +++++++++
drivers/gpu/drm/omapdrm/omap_encoder.c | 6 ------
3 files changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index e01e4cf61ae1..99ca5b3eaebb 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -245,8 +245,6 @@ static int omap_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct omap_connector *omap_connector = to_omap_connector(connector);
- enum omap_channel channel = omap_connector->output->dispc_channel;
- struct omap_drm_private *priv = connector->dev->dev_private;
struct omap_dss_device *dssdev;
struct videomode vm = {0};
struct drm_device *dev = connector->dev;
@@ -256,10 +254,6 @@ static int omap_connector_mode_valid(struct drm_connector *connector,
drm_display_mode_to_videomode(mode, &vm);
mode->vrefresh = drm_mode_vrefresh(mode);
- r = priv->dispc_ops->mgr_check_timings(priv->dispc, channel, &vm);
- if (r)
- goto done;
-
for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
if (!dssdev->ops->check_timings)
continue;
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
index d99e24dcc0bf..ae399435346b 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
@@ -390,6 +390,15 @@ static enum drm_mode_status omap_crtc_mode_valid(struct drm_crtc *crtc,
const struct drm_display_mode *mode)
{
struct omap_drm_private *priv = crtc->dev->dev_private;
+ struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct videomode vm = {0};
+ int r;
+
+ drm_display_mode_to_videomode(mode, &vm);
+ r = priv->dispc_ops->mgr_check_timings(priv->dispc, omap_crtc->channel,
+ &vm);
+ if (r)
+ return r;
/* Check for bandwidth limit */
if (priv->max_bandwidth) {
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 1f4172f653b9..623154bc44bb 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -206,19 +206,13 @@ static int omap_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_connector_state *conn_state)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- enum omap_channel channel = omap_encoder->output->dispc_channel;
struct drm_device *dev = encoder->dev;
- struct omap_drm_private *priv = dev->dev_private;
struct omap_dss_device *dssdev;
struct videomode vm = { 0 };
int ret;
drm_display_mode_to_videomode(&crtc_state->mode, &vm);
- ret = priv->dispc_ops->mgr_check_timings(priv->dispc, channel, &vm);
- if (ret)
- goto done;
-
for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) {
if (!dssdev->ops->check_timings)
continue;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 27/50] drm/omap: venc: Simplify mode setting by caching configuration
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (25 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 26/50] drm/omap: Move DISPC timing checks to CRTC .mode_valid() operation Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 28/50] drm/omap: Factor out common mode validation code Laurent Pinchart
` (22 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The mode setting handler of the VENC stores the video mode internally,
to then convert it to a configuration when programming the hardware. The
stored mode is otherwise unused. Cache the configuration directly
instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/venc.c | 68 +++++++++++++++---------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index 638cfd69ccf6..6cb708e1944e 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -301,24 +301,6 @@ static const struct videomode omap_dss_ntsc_vm = {
DISPLAY_FLAGS_SYNC_NEGEDGE,
};
-static enum venc_videomode venc_get_videomode(const struct videomode *vm)
-{
- if (!(vm->flags & DISPLAY_FLAGS_INTERLACED))
- return VENC_MODE_UNKNOWN;
-
- if (vm->pixelclock == omap_dss_pal_vm.pixelclock &&
- vm->hactive == omap_dss_pal_vm.hactive &&
- vm->vactive == omap_dss_pal_vm.vactive)
- return VENC_MODE_PAL;
-
- if (vm->pixelclock == omap_dss_ntsc_vm.pixelclock &&
- vm->hactive == omap_dss_ntsc_vm.hactive &&
- vm->vactive == omap_dss_ntsc_vm.vactive)
- return VENC_MODE_NTSC;
-
- return VENC_MODE_UNKNOWN;
-}
-
struct venc_device {
struct platform_device *pdev;
void __iomem *base;
@@ -330,7 +312,7 @@ struct venc_device {
struct clk *tv_dac_clk;
- struct videomode vm;
+ const struct venc_config *config;
enum omap_dss_venc_type type;
bool invert_polarity;
bool requires_tv_dac_clk;
@@ -450,18 +432,6 @@ static void venc_runtime_put(struct venc_device *venc)
WARN_ON(r < 0 && r != -ENOSYS);
}
-static const struct venc_config *venc_timings_to_config(const struct videomode *vm)
-{
- switch (venc_get_videomode(vm)) {
- default:
- WARN_ON_ONCE(1);
- case VENC_MODE_PAL:
- return &venc_config_pal_trm;
- case VENC_MODE_NTSC:
- return &venc_config_ntsc_trm;
- }
-}
-
static int venc_power_on(struct venc_device *venc)
{
u32 l;
@@ -472,7 +442,7 @@ static int venc_power_on(struct venc_device *venc)
goto err0;
venc_reset(venc);
- venc_write_config(venc, venc_timings_to_config(&venc->vm));
+ venc_write_config(venc, venc->config);
dss_set_venc_output(venc->dss, venc->type);
dss_set_dac_pwrdn_bgz(venc->dss, 1);
@@ -574,16 +544,46 @@ static int venc_get_modes(struct omap_dss_device *dssdev,
return ARRAY_SIZE(modes);
}
+static enum venc_videomode venc_get_videomode(const struct videomode *vm)
+{
+ if (!(vm->flags & DISPLAY_FLAGS_INTERLACED))
+ return VENC_MODE_UNKNOWN;
+
+ if (vm->pixelclock == omap_dss_pal_vm.pixelclock &&
+ vm->hactive == omap_dss_pal_vm.hactive &&
+ vm->vactive == omap_dss_pal_vm.vactive)
+ return VENC_MODE_PAL;
+
+ if (vm->pixelclock == omap_dss_ntsc_vm.pixelclock &&
+ vm->hactive == omap_dss_ntsc_vm.hactive &&
+ vm->vactive == omap_dss_ntsc_vm.vactive)
+ return VENC_MODE_NTSC;
+
+ return VENC_MODE_UNKNOWN;
+}
+
static void venc_set_timings(struct omap_dss_device *dssdev,
const struct videomode *vm)
{
struct venc_device *venc = dssdev_to_venc(dssdev);
+ enum venc_videomode venc_mode = venc_get_videomode(vm);
DSSDBG("venc_set_timings\n");
mutex_lock(&venc->venc_lock);
- venc->vm = *vm;
+ switch (venc_mode) {
+ default:
+ WARN_ON_ONCE(1);
+ /* Fall-through */
+ case VENC_MODE_PAL:
+ venc->config = &venc_config_pal_trm;
+ break;
+
+ case VENC_MODE_NTSC:
+ venc->config = &venc_config_ntsc_trm;
+ break;
+ }
dispc_set_tv_pclk(venc->dss->dispc, 13500000);
@@ -854,7 +854,7 @@ static int venc_probe(struct platform_device *pdev)
mutex_init(&venc->venc_lock);
- venc->vm = omap_dss_pal_vm;
+ venc->config = &venc_config_pal_trm;
venc_mem = platform_get_resource(venc->pdev, IORESOURCE_MEM, 0);
venc->base = devm_ioremap_resource(&pdev->dev, venc_mem);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 28/50] drm/omap: Factor out common mode validation code
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (26 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 27/50] drm/omap: venc: Simplify mode setting by caching configuration Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 29/50] drm/omap: Pass drm_display_mode to .check_timings() and .set_timings() Laurent Pinchart
` (21 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The encoder .atomic_check() and connector .mode_valid() operations both
walk through the dss devices in the pipeline to validate the mode.
Factor out the common code in a new omap_drm_connector_mode_fixup()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Remove unneeded NULL check for adjusted_mode in
omap_connector_mode_fixup()
---
drivers/gpu/drm/omapdrm/omap_connector.c | 56 +++++++++++++-----------
drivers/gpu/drm/omapdrm/omap_connector.h | 5 +++
drivers/gpu/drm/omapdrm/omap_encoder.c | 28 ++++--------
3 files changed, 44 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 99ca5b3eaebb..6fceb020e86c 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -241,45 +241,51 @@ static int omap_connector_get_modes(struct drm_connector *connector)
return 0;
}
-static int omap_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
+enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct omap_connector *omap_connector = to_omap_connector(connector);
- struct omap_dss_device *dssdev;
- struct videomode vm = {0};
- struct drm_device *dev = connector->dev;
- struct drm_display_mode *new_mode;
- int r, ret = MODE_BAD;
+ struct videomode vm = { 0 };
+ int ret;
drm_display_mode_to_videomode(mode, &vm);
- mode->vrefresh = drm_mode_vrefresh(mode);
- for (dssdev = omap_connector->output; dssdev; dssdev = dssdev->next) {
+ for (; dssdev; dssdev = dssdev->next) {
if (!dssdev->ops->check_timings)
continue;
- r = dssdev->ops->check_timings(dssdev, &vm);
- if (r)
- goto done;
+ ret = dssdev->ops->check_timings(dssdev, &vm);
+ if (ret)
+ return MODE_BAD;
}
- /* check if vrefresh is still valid */
- new_mode = drm_mode_duplicate(dev, mode);
- if (!new_mode)
- return MODE_BAD;
-
- new_mode->clock = vm.pixelclock / 1000;
- new_mode->vrefresh = 0;
- if (mode->vrefresh == drm_mode_vrefresh(new_mode))
- ret = MODE_OK;
- drm_mode_destroy(dev, new_mode);
+ drm_display_mode_from_videomode(&vm, adjusted_mode);
+
+ return MODE_OK;
+}
+
+static enum drm_mode_status omap_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
+ struct drm_display_mode new_mode = { { 0 } };
+ enum drm_mode_status status;
+
+ status = omap_connector_mode_fixup(omap_connector->output, mode,
+ &new_mode);
+ if (status != MODE_OK)
+ goto done;
+
+ /* Check if vrefresh is still valid. */
+ if (drm_mode_vrefresh(mode) != drm_mode_vrefresh(&new_mode))
+ status = MODE_NOCLOCK;
done:
DBG("connector: mode %s: " DRM_MODE_FMT,
- (ret == MODE_OK) ? "valid" : "invalid",
+ (status == MODE_OK) ? "valid" : "invalid",
DRM_MODE_ARG(mode));
- return ret;
+ return status;
}
static const struct drm_connector_funcs omap_connector_funcs = {
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.h b/drivers/gpu/drm/omapdrm/omap_connector.h
index 4a1dcd0f031b..6b7d4d95e32b 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.h
+++ b/drivers/gpu/drm/omapdrm/omap_connector.h
@@ -22,6 +22,8 @@
#include <linux/types.h>
+enum drm_mode_status;
+
struct drm_connector;
struct drm_device;
struct drm_encoder;
@@ -34,5 +36,8 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
bool omap_connector_get_hdmi_mode(struct drm_connector *connector);
void omap_connector_enable_hpd(struct drm_connector *connector);
void omap_connector_disable_hpd(struct drm_connector *connector);
+enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode);
#endif /* __OMAPDRM_CONNECTOR_H__ */
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 623154bc44bb..3a7cca01888e 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -206,29 +206,17 @@ static int omap_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_connector_state *conn_state)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
- struct drm_device *dev = encoder->dev;
- struct omap_dss_device *dssdev;
- struct videomode vm = { 0 };
- int ret;
+ enum drm_mode_status status;
- drm_display_mode_to_videomode(&crtc_state->mode, &vm);
-
- for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) {
- if (!dssdev->ops->check_timings)
- continue;
-
- ret = dssdev->ops->check_timings(dssdev, &vm);
- if (ret)
- goto done;
+ status = omap_connector_mode_fixup(omap_encoder->output,
+ &crtc_state->mode,
+ &crtc_state->adjusted_mode);
+ if (status != MODE_OK) {
+ dev_err(encoder->dev->dev, "invalid timings: %d\n", status);
+ return -EINVAL;
}
- drm_display_mode_from_videomode(&vm, &crtc_state->adjusted_mode);
-
-done:
- if (ret)
- dev_err(dev->dev, "invalid timings: %d\n", ret);
-
- return ret;
+ return 0;
}
static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 29/50] drm/omap: Pass drm_display_mode to .check_timings() and .set_timings()
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (27 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 28/50] drm/omap: Factor out common mode validation code Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 30/50] drm/omap: venc: Use drm_display_mode natively Laurent Pinchart
` (20 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omap_dss_device .check_timings() and .set_timings() operations
operate on struct videomode, while the DRM API operates on struct
drm_display_mode. This forces conversion from to videomode in the
callers. While that's not a problem per se, it creates a difference with
the drm_bridge API.
Replace the videomode parameter to the .check_timings() and
.set_timings() operations with a drm_display_mode. This pushed the
conversion to videomode down to the DSS devices in some cases. If needed
they will be converted to operate on drm_display_mode natively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 8 +++---
drivers/gpu/drm/omapdrm/dss/dpi.c | 16 +++++------
drivers/gpu/drm/omapdrm/dss/hdmi4.c | 6 ++--
drivers/gpu/drm/omapdrm/dss/hdmi5.c | 6 ++--
drivers/gpu/drm/omapdrm/dss/omapdss.h | 4 +--
drivers/gpu/drm/omapdrm/dss/sdi.c | 17 +++++------
drivers/gpu/drm/omapdrm/dss/venc.c | 28 +++++++++----------
drivers/gpu/drm/omapdrm/omap_connector.c | 7 ++---
drivers/gpu/drm/omapdrm/omap_encoder.c | 2 +-
9 files changed, 46 insertions(+), 48 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index ce812094177c..d9f10f41ddfb 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -1127,20 +1127,20 @@ static int dsicm_get_modes(struct omap_dss_device *dssdev,
}
static int dsicm_check_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+ struct drm_display_mode *mode)
{
struct panel_drv_data *ddata = to_panel_data(dssdev);
int ret = 0;
- if (vm->hactive != ddata->vm.hactive)
+ if (mode->hdisplay != ddata->vm.hactive)
ret = -EINVAL;
- if (vm->vactive != ddata->vm.vactive)
+ if (mode->vdisplay != ddata->vm.vactive)
ret = -EINVAL;
if (ret) {
dev_warn(dssdev->dev, "wrong resolution: %d x %d",
- vm->hactive, vm->vactive);
+ mode->hdisplay, mode->vdisplay);
dev_warn(dssdev->dev, "panel resolution: %d x %d",
ddata->vm.hactive, ddata->vm.vactive);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 0db01cadf09f..0cb3cb72f15f 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -459,7 +459,7 @@ static void dpi_display_disable(struct omap_dss_device *dssdev)
}
static void dpi_set_timings(struct omap_dss_device *dssdev,
- const struct videomode *vm)
+ const struct drm_display_mode *mode)
{
struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
@@ -467,13 +467,13 @@ static void dpi_set_timings(struct omap_dss_device *dssdev,
mutex_lock(&dpi->lock);
- dpi->vm = *vm;
+ drm_display_mode_to_videomode(mode, &dpi->vm);
mutex_unlock(&dpi->lock);
}
static int dpi_check_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+ struct drm_display_mode *mode)
{
struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
int lck_div, pck_div;
@@ -482,20 +482,20 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
struct dpi_clk_calc_ctx ctx;
bool ok;
- if (vm->hactive % 8 != 0)
+ if (mode->hdisplay % 8 != 0)
return -EINVAL;
- if (vm->pixelclock == 0)
+ if (mode->clock == 0)
return -EINVAL;
if (dpi->pll) {
- ok = dpi_pll_clk_calc(dpi, vm->pixelclock, &ctx);
+ ok = dpi_pll_clk_calc(dpi, mode->clock * 1000, &ctx);
if (!ok)
return -EINVAL;
fck = ctx.pll_cinfo.clkout[ctx.clkout_idx];
} else {
- ok = dpi_dss_clk_calc(dpi, vm->pixelclock, &ctx);
+ ok = dpi_dss_clk_calc(dpi, mode->clock * 1000, &ctx);
if (!ok)
return -EINVAL;
@@ -507,7 +507,7 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
pck = fck / lck_div / pck_div;
- vm->pixelclock = pck;
+ mode->clock = pck / 1000;
return 0;
}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index 60792981a33f..4337380b1bf7 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -249,15 +249,15 @@ static void hdmi_power_off_full(struct omap_hdmi *hdmi)
}
static void hdmi_display_set_timings(struct omap_dss_device *dssdev,
- const struct videomode *vm)
+ const struct drm_display_mode *mode)
{
struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
mutex_lock(&hdmi->lock);
- hdmi->cfg.vm = *vm;
+ drm_display_mode_to_videomode(mode, &hdmi->cfg.vm);
- dispc_set_tv_pclk(hdmi->dss->dispc, vm->pixelclock);
+ dispc_set_tv_pclk(hdmi->dss->dispc, mode->clock * 1000);
mutex_unlock(&hdmi->lock);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index d7d33b4d2bed..b94f884c5c1a 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -248,15 +248,15 @@ static void hdmi_power_off_full(struct omap_hdmi *hdmi)
}
static void hdmi_display_set_timings(struct omap_dss_device *dssdev,
- const struct videomode *vm)
+ const struct drm_display_mode *mode)
{
struct omap_hdmi *hdmi = dssdev_to_hdmi(dssdev);
mutex_lock(&hdmi->lock);
- hdmi->cfg.vm = *vm;
+ drm_display_mode_to_videomode(mode, &hdmi->cfg.vm);
- dispc_set_tv_pclk(hdmi->dss->dispc, vm->pixelclock);
+ dispc_set_tv_pclk(hdmi->dss->dispc, mode->clock * 1000);
mutex_unlock(&hdmi->lock);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index 015b2dd9fb99..a63b1d4b7a8a 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -366,9 +366,9 @@ struct omap_dss_device_ops {
void (*post_disable)(struct omap_dss_device *dssdev);
int (*check_timings)(struct omap_dss_device *dssdev,
- struct videomode *vm);
+ struct drm_display_mode *mode);
void (*set_timings)(struct omap_dss_device *dssdev,
- const struct videomode *vm);
+ const struct drm_display_mode *mode);
bool (*detect)(struct omap_dss_device *dssdev);
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 58c17566a4cb..f096a7f77e5f 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -206,36 +206,37 @@ static void sdi_display_disable(struct omap_dss_device *dssdev)
}
static void sdi_set_timings(struct omap_dss_device *dssdev,
- const struct videomode *vm)
+ const struct drm_display_mode *mode)
{
struct sdi_device *sdi = dssdev_to_sdi(dssdev);
- sdi->vm = *vm;
+ drm_display_mode_to_videomode(mode, &sdi->vm);
}
static int sdi_check_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+ struct drm_display_mode *mode)
{
struct sdi_device *sdi = dssdev_to_sdi(dssdev);
struct dispc_clock_info dispc_cinfo;
+ unsigned long pixelclock = mode->clock * 1000;
unsigned long fck;
unsigned long pck;
int r;
- if (vm->pixelclock == 0)
+ if (pixelclock == 0)
return -EINVAL;
- r = sdi_calc_clock_div(sdi, vm->pixelclock, &fck, &dispc_cinfo);
+ r = sdi_calc_clock_div(sdi, pixelclock, &fck, &dispc_cinfo);
if (r)
return r;
pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
- if (pck != vm->pixelclock) {
+ if (pck != pixelclock) {
DSSWARN("Pixel clock adjusted from %lu Hz to %lu Hz\n",
- vm->pixelclock, pck);
+ pixelclock, pck);
- vm->pixelclock = pck;
+ mode->clock = pck / 1000;
}
return 0;
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index 6cb708e1944e..7bce5898654a 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -544,29 +544,29 @@ static int venc_get_modes(struct omap_dss_device *dssdev,
return ARRAY_SIZE(modes);
}
-static enum venc_videomode venc_get_videomode(const struct videomode *vm)
+static enum venc_videomode venc_get_videomode(const struct drm_display_mode *mode)
{
- if (!(vm->flags & DISPLAY_FLAGS_INTERLACED))
+ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
return VENC_MODE_UNKNOWN;
- if (vm->pixelclock == omap_dss_pal_vm.pixelclock &&
- vm->hactive == omap_dss_pal_vm.hactive &&
- vm->vactive == omap_dss_pal_vm.vactive)
+ if (mode->clock == omap_dss_pal_vm.pixelclock / 1000 &&
+ mode->hdisplay == omap_dss_pal_vm.hactive &&
+ mode->vdisplay == omap_dss_pal_vm.vactive)
return VENC_MODE_PAL;
- if (vm->pixelclock == omap_dss_ntsc_vm.pixelclock &&
- vm->hactive == omap_dss_ntsc_vm.hactive &&
- vm->vactive == omap_dss_ntsc_vm.vactive)
+ if (mode->clock == omap_dss_ntsc_vm.pixelclock / 1000 &&
+ mode->hdisplay == omap_dss_ntsc_vm.hactive &&
+ mode->vdisplay == omap_dss_ntsc_vm.vactive)
return VENC_MODE_NTSC;
return VENC_MODE_UNKNOWN;
}
static void venc_set_timings(struct omap_dss_device *dssdev,
- const struct videomode *vm)
+ const struct drm_display_mode *mode)
{
struct venc_device *venc = dssdev_to_venc(dssdev);
- enum venc_videomode venc_mode = venc_get_videomode(vm);
+ enum venc_videomode venc_mode = venc_get_videomode(mode);
DSSDBG("venc_set_timings\n");
@@ -591,17 +591,17 @@ static void venc_set_timings(struct omap_dss_device *dssdev,
}
static int venc_check_timings(struct omap_dss_device *dssdev,
- struct videomode *vm)
+ struct drm_display_mode *mode)
{
DSSDBG("venc_check_timings\n");
- switch (venc_get_videomode(vm)) {
+ switch (venc_get_videomode(mode)) {
case VENC_MODE_PAL:
- *vm = omap_dss_pal_vm;
+ drm_display_mode_from_videomode(&omap_dss_pal_vm, mode);
return 0;
case VENC_MODE_NTSC:
- *vm = omap_dss_ntsc_vm;
+ drm_display_mode_from_videomode(&omap_dss_ntsc_vm, mode);
return 0;
default:
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 6fceb020e86c..9be33d9b8485 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -245,22 +245,19 @@ enum drm_mode_status omap_connector_mode_fixup(struct omap_dss_device *dssdev,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct videomode vm = { 0 };
int ret;
- drm_display_mode_to_videomode(mode, &vm);
+ drm_mode_copy(adjusted_mode, mode);
for (; dssdev; dssdev = dssdev->next) {
if (!dssdev->ops->check_timings)
continue;
- ret = dssdev->ops->check_timings(dssdev, &vm);
+ ret = dssdev->ops->check_timings(dssdev, adjusted_mode);
if (ret)
return MODE_BAD;
}
- drm_display_mode_from_videomode(&vm, adjusted_mode);
-
return MODE_OK;
}
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 3a7cca01888e..367234de5dc7 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -134,7 +134,7 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) {
if (dssdev->ops->set_timings)
- dssdev->ops->set_timings(dssdev, &vm);
+ dssdev->ops->set_timings(dssdev, adjusted_mode);
}
/* Set the HDMI mode and HDMI infoframe if applicable. */
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 30/50] drm/omap: venc: Use drm_display_mode natively
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (28 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 29/50] drm/omap: Pass drm_display_mode to .check_timings() and .set_timings() Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 31/50] drm/omap: Store pixel clock instead of full mode in DPI and SDI encoders Laurent Pinchart
` (19 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Replace internal usage of struct videomode with struct drm_display_mode
in order to avoid converting needlessly between the data structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Set mode.crtc_* fields and mode name in venc_check_timings()
---
drivers/gpu/drm/omapdrm/dss/venc.c | 86 +++++++++++++++---------------
1 file changed, 42 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index 7bce5898654a..f2cbecfd05b5 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -267,38 +267,34 @@ enum venc_videomode {
VENC_MODE_NTSC,
};
-static const struct videomode omap_dss_pal_vm = {
- .hactive = 720,
- .vactive = 574,
- .pixelclock = 13500000,
- .hsync_len = 64,
- .hfront_porch = 12,
- .hback_porch = 68,
- .vsync_len = 5,
- .vfront_porch = 5,
- .vback_porch = 41,
+static const struct drm_display_mode omap_dss_pal_mode = {
+ .hdisplay = 720,
+ .hsync_start = 732,
+ .hsync_end = 796,
+ .htotal = 864,
+ .vdisplay = 574,
+ .vsync_start = 579,
+ .vsync_end = 584,
+ .vtotal = 625,
+ .clock = 13500,
- .flags = DISPLAY_FLAGS_INTERLACED | DISPLAY_FLAGS_HSYNC_LOW |
- DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_DE_HIGH |
- DISPLAY_FLAGS_PIXDATA_POSEDGE |
- DISPLAY_FLAGS_SYNC_NEGEDGE,
+ .flags = DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_NHSYNC |
+ DRM_MODE_FLAG_NVSYNC,
};
-static const struct videomode omap_dss_ntsc_vm = {
- .hactive = 720,
- .vactive = 482,
- .pixelclock = 13500000,
- .hsync_len = 64,
- .hfront_porch = 16,
- .hback_porch = 58,
- .vsync_len = 6,
- .vfront_porch = 6,
- .vback_porch = 31,
+static const struct drm_display_mode omap_dss_ntsc_mode = {
+ .hdisplay = 720,
+ .hsync_start = 736,
+ .hsync_end = 800,
+ .htotal = 858,
+ .vdisplay = 482,
+ .vsync_start = 488,
+ .vsync_end = 494,
+ .vtotal = 525,
+ .clock = 13500,
- .flags = DISPLAY_FLAGS_INTERLACED | DISPLAY_FLAGS_HSYNC_LOW |
- DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_DE_HIGH |
- DISPLAY_FLAGS_PIXDATA_POSEDGE |
- DISPLAY_FLAGS_SYNC_NEGEDGE,
+ .flags = DRM_MODE_FLAG_INTERLACE | DRM_MODE_FLAG_NHSYNC |
+ DRM_MODE_FLAG_NVSYNC,
};
struct venc_device {
@@ -521,21 +517,19 @@ static void venc_display_disable(struct omap_dss_device *dssdev)
static int venc_get_modes(struct omap_dss_device *dssdev,
struct drm_connector *connector)
{
- static const struct videomode *modes[] = {
- &omap_dss_pal_vm,
- &omap_dss_ntsc_vm,
+ static const struct drm_display_mode *modes[] = {
+ &omap_dss_pal_mode,
+ &omap_dss_ntsc_mode,
};
unsigned int i;
for (i = 0; i < ARRAY_SIZE(modes); ++i) {
struct drm_display_mode *mode;
- mode = drm_mode_create(connector->dev);
+ mode = drm_mode_duplicate(connector->dev, modes[i]);
if (!mode)
return i;
- drm_display_mode_from_videomode(modes[i], mode);
-
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
@@ -549,14 +543,14 @@ static enum venc_videomode venc_get_videomode(const struct drm_display_mode *mod
if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
return VENC_MODE_UNKNOWN;
- if (mode->clock == omap_dss_pal_vm.pixelclock / 1000 &&
- mode->hdisplay == omap_dss_pal_vm.hactive &&
- mode->vdisplay == omap_dss_pal_vm.vactive)
+ if (mode->clock == omap_dss_pal_mode.clock &&
+ mode->hdisplay == omap_dss_pal_mode.hdisplay &&
+ mode->vdisplay == omap_dss_pal_mode.vdisplay)
return VENC_MODE_PAL;
- if (mode->clock == omap_dss_ntsc_vm.pixelclock / 1000 &&
- mode->hdisplay == omap_dss_ntsc_vm.hactive &&
- mode->vdisplay == omap_dss_ntsc_vm.vactive)
+ if (mode->clock == omap_dss_ntsc_mode.clock &&
+ mode->hdisplay == omap_dss_ntsc_mode.hdisplay &&
+ mode->vdisplay == omap_dss_ntsc_mode.vdisplay)
return VENC_MODE_NTSC;
return VENC_MODE_UNKNOWN;
@@ -597,16 +591,20 @@ static int venc_check_timings(struct omap_dss_device *dssdev,
switch (venc_get_videomode(mode)) {
case VENC_MODE_PAL:
- drm_display_mode_from_videomode(&omap_dss_pal_vm, mode);
- return 0;
+ drm_mode_copy(mode, &omap_dss_pal_mode);
+ break;
case VENC_MODE_NTSC:
- drm_display_mode_from_videomode(&omap_dss_ntsc_vm, mode);
- return 0;
+ drm_mode_copy(mode, &omap_dss_ntsc_mode);
+ break;
default:
return -EINVAL;
}
+
+ drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+ drm_mode_set_name(mode);
+ return 0;
}
static int venc_dump_regs(struct seq_file *s, void *p)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 31/50] drm/omap: Store pixel clock instead of full mode in DPI and SDI encoders
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (29 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 30/50] drm/omap: venc: Use drm_display_mode natively Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 32/50] drm/omap: Simplify OF lookup of DSS devices Laurent Pinchart
` (18 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The DPI and SDI encoders store the full videomode upon mode set, to only
use the value of the pixel clock when enabling the encoder. This wastes
memory. Store the pixel clock value only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/dpi.c | 9 ++++-----
drivers/gpu/drm/omapdrm/dss/sdi.c | 6 +++---
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 0cb3cb72f15f..295bc3eeea80 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -47,8 +47,8 @@ struct dpi_data {
struct mutex lock;
- struct videomode vm;
struct dss_lcd_mgr_config mgr_config;
+ unsigned long pixelclock;
int data_lines;
struct omap_dss_device output;
@@ -347,16 +347,15 @@ static int dpi_set_dispc_clk(struct dpi_data *dpi, unsigned long pck_req,
static int dpi_set_mode(struct dpi_data *dpi)
{
- const struct videomode *vm = &dpi->vm;
int lck_div = 0, pck_div = 0;
unsigned long fck = 0;
int r = 0;
if (dpi->pll)
r = dpi_set_pll_clk(dpi, dpi->output.dispc_channel,
- vm->pixelclock, &fck, &lck_div, &pck_div);
+ dpi->pixelclock, &fck, &lck_div, &pck_div);
else
- r = dpi_set_dispc_clk(dpi, vm->pixelclock, &fck,
+ r = dpi_set_dispc_clk(dpi, dpi->pixelclock, &fck,
&lck_div, &pck_div);
if (r)
return r;
@@ -467,7 +466,7 @@ static void dpi_set_timings(struct omap_dss_device *dssdev,
mutex_lock(&dpi->lock);
- drm_display_mode_to_videomode(mode, &dpi->vm);
+ dpi->pixelclock = mode->clock * 1000;
mutex_unlock(&dpi->lock);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index f096a7f77e5f..38b0bf19538d 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -37,7 +37,7 @@ struct sdi_device {
struct regulator *vdds_sdi_reg;
struct dss_lcd_mgr_config mgr_config;
- struct videomode vm;
+ unsigned long pixelclock;
int datapairs;
struct omap_dss_device output;
@@ -144,7 +144,7 @@ static void sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_get_dispc;
- r = sdi_calc_clock_div(sdi, sdi->vm.pixelclock, &fck, &dispc_cinfo);
+ r = sdi_calc_clock_div(sdi, sdi->pixelclock, &fck, &dispc_cinfo);
if (r)
goto err_calc_clock_div;
@@ -210,7 +210,7 @@ static void sdi_set_timings(struct omap_dss_device *dssdev,
{
struct sdi_device *sdi = dssdev_to_sdi(dssdev);
- drm_display_mode_to_videomode(mode, &sdi->vm);
+ sdi->pixelclock = mode->clock * 1000;
}
static int sdi_check_timings(struct omap_dss_device *dssdev,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 32/50] drm/omap: Simplify OF lookup of DSS devices
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (30 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 31/50] drm/omap: Store pixel clock instead of full mode in DPI and SDI encoders Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 33/50] drm/omap: Refactor initialization sequence Laurent Pinchart
` (17 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Now that the direction of OF graph walk has been reversed, there's no
need to lookup devices by port as we have no sink device connected
through multiple sink ports. Simplify OF lookup of the DSS devices to
look them up by node only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/base.c | 5 +--
drivers/gpu/drm/omapdrm/dss/dss-of.c | 60 ++++-----------------------
drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 +-
3 files changed, 10 insertions(+), 58 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 62ccbeb99a84..d14abde3c5f0 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -112,13 +112,12 @@ void omapdss_device_put(struct omap_dss_device *dssdev)
}
EXPORT_SYMBOL(omapdss_device_put);
-struct omap_dss_device *omapdss_find_device_by_port(struct device_node *src,
- unsigned int port)
+struct omap_dss_device *omapdss_find_device_by_node(struct device_node *node)
{
struct omap_dss_device *dssdev;
list_for_each_entry(dssdev, &omapdss_devices_list, list) {
- if (dssdev->dev->of_node == src && dssdev->of_ports & BIT(port))
+ if (dssdev->dev->of_node == node)
return omapdss_device_get(dssdev);
}
diff --git a/drivers/gpu/drm/omapdrm/dss/dss-of.c b/drivers/gpu/drm/omapdrm/dss/dss-of.c
index 0422597ac6b0..b2094055c5fc 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss-of.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss-of.c
@@ -12,71 +12,25 @@
* more details.
*/
-#include <linux/device.h>
#include <linux/err.h>
-#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
-#include <linux/seq_file.h>
#include "omapdss.h"
-static struct device_node *
-dss_of_port_get_parent_device(struct device_node *port)
-{
- struct device_node *np;
- int i;
-
- if (!port)
- return NULL;
-
- np = of_get_parent(port);
-
- for (i = 0; i < 2 && np; ++i) {
- struct property *prop;
-
- prop = of_find_property(np, "compatible", NULL);
-
- if (prop)
- return np;
-
- np = of_get_next_parent(np);
- }
-
- return NULL;
-}
-
struct omap_dss_device *
omapdss_of_find_connected_device(struct device_node *node, unsigned int port)
{
- struct device_node *src_node;
- struct device_node *src_port;
- struct device_node *ep;
- struct omap_dss_device *src;
- u32 port_number = 0;
+ struct device_node *remote_node;
+ struct omap_dss_device *dssdev;
- /* Get the endpoint... */
- ep = of_graph_get_endpoint_by_regs(node, port, 0);
- if (!ep)
+ remote_node = of_graph_get_remote_node(node, port, 0);
+ if (!remote_node)
return NULL;
- /* ... and its remote port... */
- src_port = of_graph_get_remote_port(ep);
- of_node_put(ep);
- if (!src_port)
- return NULL;
-
- /* ... and the remote port's number and parent... */
- of_property_read_u32(src_port, "reg", &port_number);
- src_node = dss_of_port_get_parent_device(src_port);
- of_node_put(src_port);
- if (!src_node)
- return ERR_PTR(-EINVAL);
-
- /* ... and finally the connected device. */
- src = omapdss_find_device_by_port(src_node, port_number);
- of_node_put(src_node);
+ dssdev = omapdss_find_device_by_node(remote_node);
+ of_node_put(remote_node);
- return src ? src : ERR_PTR(-EPROBE_DEFER);
+ return dssdev ? dssdev : ERR_PTR(-EPROBE_DEFER);
}
EXPORT_SYMBOL_GPL(omapdss_of_find_connected_device);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index a63b1d4b7a8a..d13a6b5774e8 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -474,8 +474,7 @@ void omapdss_device_register(struct omap_dss_device *dssdev);
void omapdss_device_unregister(struct omap_dss_device *dssdev);
struct omap_dss_device *omapdss_device_get(struct omap_dss_device *dssdev);
void omapdss_device_put(struct omap_dss_device *dssdev);
-struct omap_dss_device *omapdss_find_device_by_port(struct device_node *src,
- unsigned int port);
+struct omap_dss_device *omapdss_find_device_by_node(struct device_node *node);
int omapdss_device_connect(struct dss_device *dss,
struct omap_dss_device *src,
struct omap_dss_device *dst);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 33/50] drm/omap: Refactor initialization sequence
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (31 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 32/50] drm/omap: Simplify OF lookup of DSS devices Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 34/50] drm/omap: Merge omap_dss_device type and output_type fields Laurent Pinchart
` (16 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omapdrm driver initialization procedure starts by connecting all
available pipelines, gathering related information (such as output and
display DSS devices, and DT aliases), sorting them by alias, and finally
creates all the DRM/KMS objects.
When using DRM bridges instead of DSS devices, we will need to attach to
the bridges before getting the aliases. As attaching to bridges requires
an encoder object, we have to reorganize the initialization sequence to
create encoders before getting aliases and sorting the pipelines.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 123 +++++++++++++----------------
1 file changed, 56 insertions(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 008eec6356fd..33f79c490011 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -150,48 +150,27 @@ static void omap_disconnect_pipelines(struct drm_device *ddev)
priv->num_pipes = 0;
}
-static int omap_compare_pipes(const void *a, const void *b)
-{
- const struct omap_drm_pipeline *pipe1 = a;
- const struct omap_drm_pipeline *pipe2 = b;
-
- if (pipe1->alias_id > pipe2->alias_id)
- return 1;
- else if (pipe1->alias_id < pipe2->alias_id)
- return -1;
- return 0;
-}
-
static int omap_connect_pipelines(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
struct omap_dss_device *output = NULL;
- unsigned int i;
int r;
- if (!omapdss_stack_is_ready())
- return -EPROBE_DEFER;
-
for_each_dss_output(output) {
r = omapdss_device_connect(priv->dss, NULL, output);
if (r == -EPROBE_DEFER) {
omapdss_device_put(output);
- goto cleanup;
+ return r;
} else if (r) {
dev_warn(output->dev, "could not connect output %s\n",
output->name);
} else {
struct omap_drm_pipeline *pipe;
- int id;
pipe = &priv->pipes[priv->num_pipes++];
pipe->output = omapdss_device_get(output);
pipe->display = omapdss_display_get(output);
- id = of_alias_get_id(pipe->display->dev->of_node,
- "display");
- pipe->alias_id = id >= 0 ? id : priv->num_pipes - 1;
-
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
/* To balance the 'for_each_dss_output' loop */
omapdss_device_put(output);
@@ -200,36 +179,19 @@ static int omap_connect_pipelines(struct drm_device *ddev)
}
}
- /* Sort the list by DT aliases */
- sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]),
- omap_compare_pipes, NULL);
-
- /*
- * Populate the pipeline lookup table by DISPC channel. Only one display
- * is allowed per channel.
- */
- for (i = 0; i < priv->num_pipes; ++i) {
- struct omap_drm_pipeline *pipe = &priv->pipes[i];
- enum omap_channel channel = pipe->output->dispc_channel;
-
- if (WARN_ON(priv->channels[channel] != NULL)) {
- r = -EINVAL;
- goto cleanup;
- }
-
- priv->channels[channel] = pipe;
- }
-
return 0;
+}
-cleanup:
- /*
- * if we are deferring probe, we disconnect the devices we previously
- * connected
- */
- omap_disconnect_pipelines(ddev);
+static int omap_compare_pipelines(const void *a, const void *b)
+{
+ const struct omap_drm_pipeline *pipe1 = a;
+ const struct omap_drm_pipeline *pipe2 = b;
- return r;
+ if (pipe1->alias_id > pipe2->alias_id)
+ return 1;
+ else if (pipe1->alias_id < pipe2->alias_id)
+ return -1;
+ return 0;
}
static int omap_modeset_init_properties(struct drm_device *dev)
@@ -254,6 +216,9 @@ static int omap_modeset_init(struct drm_device *dev)
int ret;
u32 plane_crtc_mask;
+ if (!omapdss_stack_is_ready())
+ return -EPROBE_DEFER;
+
drm_mode_config_init(dev);
ret = omap_modeset_init_properties(dev);
@@ -268,6 +233,10 @@ static int omap_modeset_init(struct drm_device *dev)
* configuration does not match the expectations or exceeds
* the available resources, the configuration is rejected.
*/
+ ret = omap_connect_pipelines(dev);
+ if (ret < 0)
+ return ret;
+
if (priv->num_pipes > num_mgrs || priv->num_pipes > num_ovls) {
dev_err(dev->dev, "%s(): Too many connected displays\n",
__func__);
@@ -293,33 +262,58 @@ static int omap_modeset_init(struct drm_device *dev)
priv->planes[priv->num_planes++] = plane;
}
- /* Create the CRTCs, encoders and connectors. */
+ /* Create the encoders and get the pipelines aliases. */
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
- struct omap_dss_device *display = pipe->display;
+ int id;
+
+ pipe->encoder = omap_encoder_init(dev, pipe->output);
+ if (!pipe->encoder)
+ return -ENOMEM;
+
+ id = of_alias_get_id(pipe->display->dev->of_node, "display");
+ pipe->alias_id = id >= 0 ? id : i;
+ }
+
+ /* Sort the pipelines by DT aliases. */
+ sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]),
+ omap_compare_pipelines, NULL);
+
+ /*
+ * Populate the pipeline lookup table by DISPC channel. Only one display
+ * is allowed per channel.
+ */
+ for (i = 0; i < priv->num_pipes; ++i) {
+ struct omap_drm_pipeline *pipe = &priv->pipes[i];
+ enum omap_channel channel = pipe->output->dispc_channel;
+
+ if (WARN_ON(priv->channels[channel] != NULL))
+ return -EINVAL;
+
+ priv->channels[channel] = pipe;
+ }
+
+ /* Create the connectors and CRTCs. */
+ for (i = 0; i < priv->num_pipes; i++) {
+ struct omap_drm_pipeline *pipe = &priv->pipes[i];
+ struct drm_encoder *encoder = pipe->encoder;
struct drm_connector *connector;
- struct drm_encoder *encoder;
struct drm_crtc *crtc;
- encoder = omap_encoder_init(dev, pipe->output);
- if (!encoder)
- return -ENOMEM;
-
- connector = omap_connector_init(dev, pipe->output, display,
- encoder);
+ connector = omap_connector_init(dev, pipe->output,
+ pipe->display, encoder);
if (!connector)
return -ENOMEM;
+ drm_connector_attach_encoder(connector, encoder);
+ pipe->connector = connector;
+
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
if (IS_ERR(crtc))
return PTR_ERR(crtc);
- drm_connector_attach_encoder(connector, encoder);
encoder->possible_crtcs = 1 << i;
-
pipe->crtc = crtc;
- pipe->encoder = encoder;
- pipe->connector = connector;
}
DBG("registered %u planes, %u crtcs/encoders/connectors\n",
@@ -556,10 +550,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_crtc_pre_init(priv);
- ret = omap_connect_pipelines(ddev);
- if (ret)
- goto err_crtc_uninit;
-
soc = soc_device_match(omapdrm_soc_devices);
priv->omaprev = soc ? (unsigned int)soc->data : 0;
priv->wq = alloc_ordered_workqueue("omapdrm", 0);
@@ -617,7 +607,6 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
omap_disconnect_pipelines(ddev);
-err_crtc_uninit:
omap_crtc_pre_uninit(priv);
drm_dev_put(ddev);
return ret;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 34/50] drm/omap: Merge omap_dss_device type and output_type fields
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (32 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 33/50] drm/omap: Refactor initialization sequence Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 35/50] drm: Clarify definition of the DRM_BUS_FLAG_(PIXDATA|SYNC)_* macros Laurent Pinchart
` (15 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omap_dss_device type and output_type fields differ mostly for
historical reasons. The output_type field is required for all devices
but the display at the end of the pipeline, and must be set to
OMAP_DISPLAY_TYPE_NONE for the latter. The type field is required for
all devices but the internal encoder, for which it is ignored.
The only reason why the output_type field must be set to
OMAP_DISPLAY_TYPE_NONE for the display at the end of the pipeline is to
identify omap_dss_device instances corresponding to displays. This is
not documented and confusing.
Clean the code by adding a new display field to the omap_dss_device
structure to identify displays, and merge the type and output_type
fields.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../gpu/drm/omapdrm/displays/connector-analog-tv.c | 1 +
drivers/gpu/drm/omapdrm/displays/connector-dvi.c | 1 +
drivers/gpu/drm/omapdrm/displays/connector-hdmi.c | 1 +
drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 -
drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c | 1 -
.../gpu/drm/omapdrm/displays/encoder-tpd12s015.c | 1 -
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 1 +
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 1 +
.../omapdrm/displays/panel-lgphilips-lb035q02.c | 1 +
.../drm/omapdrm/displays/panel-nec-nl8048hl11.c | 1 +
.../drm/omapdrm/displays/panel-sharp-ls037v7dw01.c | 1 +
.../drm/omapdrm/displays/panel-sony-acx565akm.c | 1 +
.../drm/omapdrm/displays/panel-tpo-td028ttec1.c | 1 +
.../drm/omapdrm/displays/panel-tpo-td043mtea1.c | 1 +
drivers/gpu/drm/omapdrm/dss/base.c | 2 +-
drivers/gpu/drm/omapdrm/dss/dpi.c | 2 +-
drivers/gpu/drm/omapdrm/dss/dsi.c | 2 +-
drivers/gpu/drm/omapdrm/dss/hdmi4.c | 2 +-
drivers/gpu/drm/omapdrm/dss/hdmi5.c | 2 +-
drivers/gpu/drm/omapdrm/dss/omapdss.h | 14 +++++++++-----
drivers/gpu/drm/omapdrm/dss/output.c | 2 +-
drivers/gpu/drm/omapdrm/dss/sdi.c | 2 +-
drivers/gpu/drm/omapdrm/dss/venc.c | 2 +-
drivers/gpu/drm/omapdrm/omap_crtc.c | 2 +-
drivers/gpu/drm/omapdrm/omap_encoder.c | 6 +++---
25 files changed, 32 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
index 1503563117f3..6c0561101874 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-analog-tv.c
@@ -56,6 +56,7 @@ static int tvc_probe(struct platform_device *pdev)
dssdev->ops = &tvc_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
index bf5ee50ce5fe..fa3a69bf8a04 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
@@ -239,6 +239,7 @@ static int dvic_probe(struct platform_device *pdev)
dssdev->ops = &dvic_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
index 797da4a3f22e..68d6f6e44b03 100644
--- a/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
+++ b/drivers/gpu/drm/omapdrm/displays/connector-hdmi.c
@@ -140,6 +140,7 @@ static int hdmic_probe(struct platform_device *pdev)
dssdev->ops = &hdmic_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = ddata->hpd_gpio
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
index fc5e0c47054d..29a5a130ebd1 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
@@ -88,7 +88,6 @@ static int opa362_probe(struct platform_device *pdev)
dssdev->ops = &opa362_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
- dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
index 82035078377a..fb88537de1cc 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
@@ -84,7 +84,6 @@ static int tfp410_probe(struct platform_device *pdev)
dssdev->ops = &tfp410_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
index ced36718a95f..bc03752d2762 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c
@@ -167,7 +167,6 @@ static int tpd_probe(struct platform_device *pdev)
dssdev->ops = &tpd_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
- dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_DETECT
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index 897b8820e000..389ae2821222 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -150,6 +150,7 @@ static int panel_dpi_probe(struct platform_device *pdev)
dssdev->dev = &pdev->dev;
dssdev->ops = &panel_dpi_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index d9f10f41ddfb..741a5e324767 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -1272,6 +1272,7 @@ static int dsicm_probe(struct platform_device *pdev)
dssdev->ops = &dsicm_ops;
dssdev->driver = &dsicm_dss_driver;
dssdev->type = OMAP_DISPLAY_TYPE_DSI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index f37931bf1c5f..4133351924be 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -197,6 +197,7 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
dssdev->dev = &spi->dev;
dssdev->ops = &lb035q02_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index 8f2fb3d0492f..498a88307f04 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -192,6 +192,7 @@ static int nec_8048_probe(struct spi_device *spi)
dssdev->dev = &spi->dev;
dssdev->ops = &nec_8048_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 8d5d7f775b55..1e68e0d14f87 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -207,6 +207,7 @@ static int sharp_ls_probe(struct platform_device *pdev)
dssdev->dev = &pdev->dev;
dssdev->ops = &sharp_ls_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index b8360cef3754..abee0b348cff 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -706,6 +706,7 @@ static int acx565akm_probe(struct spi_device *spi)
dssdev->dev = &spi->dev;
dssdev->ops = &acx565akm_ops;
dssdev->type = OMAP_DISPLAY_TYPE_SDI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index 721c5bb3bdef..5b4fbcc196bc 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -321,6 +321,7 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
dssdev->dev = &spi->dev;
dssdev->ops = &td028ttec1_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 50960018dbe8..781dc8b0afe7 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -420,6 +420,7 @@ static int tpo_td043_probe(struct spi_device *spi)
dssdev->dev = &spi->dev;
dssdev->ops = &tpo_td043_ops;
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->display = true;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index d14abde3c5f0..81ea0f55cd75 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -207,7 +207,7 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
dev_dbg(dst->dev, "disconnect\n");
if (!dst->id && !omapdss_device_is_connected(dst)) {
- WARN_ON(dst->output_type);
+ WARN_ON(!dst->display);
return;
}
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 295bc3eeea80..cc78dfa07f04 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -634,7 +634,7 @@ static int dpi_init_output_port(struct dpi_data *dpi, struct device_node *port)
out->dev = &dpi->pdev->dev;
out->id = OMAP_DSS_OUTPUT_DPI;
- out->output_type = OMAP_DISPLAY_TYPE_DPI;
+ out->type = OMAP_DISPLAY_TYPE_DPI;
out->dispc_channel = dpi_get_channel(dpi);
out->of_ports = BIT(port_num);
out->ops = &dpi_ops;
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 4ac325e664b5..2582b566e0b0 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -5121,7 +5121,7 @@ static int dsi_init_output(struct dsi_data *dsi)
out->id = dsi->module_id == 0 ?
OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
- out->output_type = OMAP_DISPLAY_TYPE_DSI;
+ out->type = OMAP_DISPLAY_TYPE_DSI;
out->name = dsi->module_id == 0 ? "dsi.0" : "dsi.1";
out->dispc_channel = dsi_get_channel(dsi);
out->ops = &dsi_ops;
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index 4337380b1bf7..6339e2756b34 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -679,7 +679,7 @@ static int hdmi4_init_output(struct omap_hdmi *hdmi)
out->dev = &hdmi->pdev->dev;
out->id = OMAP_DSS_OUTPUT_HDMI;
- out->output_type = OMAP_DISPLAY_TYPE_HDMI;
+ out->type = OMAP_DISPLAY_TYPE_HDMI;
out->name = "hdmi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
out->ops = &hdmi_ops;
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index b94f884c5c1a..2955bbad13bb 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -663,7 +663,7 @@ static int hdmi5_init_output(struct omap_hdmi *hdmi)
out->dev = &hdmi->pdev->dev;
out->id = OMAP_DSS_OUTPUT_HDMI;
- out->output_type = OMAP_DISPLAY_TYPE_HDMI;
+ out->type = OMAP_DISPLAY_TYPE_HDMI;
out->name = "hdmi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
out->ops = &hdmi_ops;
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index d13a6b5774e8..ab5467a1e92c 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -413,14 +413,18 @@ struct omap_dss_device {
struct list_head list;
+ /*
+ * DSS type that this device generates (for DSS internal devices) or
+ * requires (for external encoders, connectors and panels). Must be a
+ * non-zero (different than OMAP_DISPLAY_TYPE_NONE) value.
+ */
enum omap_display_type type;
+
/*
- * DSS output type that this device generates (for DSS internal devices)
- * or requires (for external encoders). Must be OMAP_DISPLAY_TYPE_NONE
- * for display devices (connectors and panels) and to non-zero value for
- * all other devices.
+ * True if the device is a display (panel or connector) at the end of
+ * the pipeline, false otherwise.
*/
- enum omap_display_type output_type;
+ bool display;
const char *name;
diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c
index 0ac400a521f3..f25ecfd26534 100644
--- a/drivers/gpu/drm/omapdrm/dss/output.c
+++ b/drivers/gpu/drm/omapdrm/dss/output.c
@@ -33,7 +33,7 @@ int omapdss_device_init_output(struct omap_dss_device *out)
return PTR_ERR(out->next);
}
- if (out->next && out->output_type != out->next->type) {
+ if (out->next && out->type != out->next->type) {
dev_err(out->dev, "output type and display type don't match\n");
return -EINVAL;
}
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 38b0bf19538d..e7945322c471 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -272,7 +272,7 @@ static int sdi_init_output(struct sdi_device *sdi)
out->dev = &sdi->pdev->dev;
out->id = OMAP_DSS_OUTPUT_SDI;
- out->output_type = OMAP_DISPLAY_TYPE_SDI;
+ out->type = OMAP_DISPLAY_TYPE_SDI;
out->name = "sdi.0";
out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
/* We have SDI only on OMAP3, where it's on port 1 */
diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c b/drivers/gpu/drm/omapdrm/dss/venc.c
index f2cbecfd05b5..da43b865d973 100644
--- a/drivers/gpu/drm/omapdrm/dss/venc.c
+++ b/drivers/gpu/drm/omapdrm/dss/venc.c
@@ -760,7 +760,7 @@ static int venc_init_output(struct venc_device *venc)
out->dev = &venc->pdev->dev;
out->id = OMAP_DSS_OUTPUT_VENC;
- out->output_type = OMAP_DISPLAY_TYPE_VENC;
+ out->type = OMAP_DISPLAY_TYPE_VENC;
out->name = "venc.0";
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
out->ops = &venc_ops;
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
index ae399435346b..1353aec73611 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
@@ -128,7 +128,7 @@ static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
if (WARN_ON(omap_crtc->enabled == enable))
return;
- if (omap_crtc->pipe->output->output_type == OMAP_DISPLAY_TYPE_HDMI) {
+ if (omap_crtc->pipe->output->type == OMAP_DISPLAY_TYPE_HDMI) {
priv->dispc_ops->mgr_enable(priv->dispc, channel, enable);
omap_crtc->enabled = enable;
return;
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 367234de5dc7..42748479d374 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -138,7 +138,7 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
}
/* Set the HDMI mode and HDMI infoframe if applicable. */
- if (omap_encoder->output->output_type == OMAP_DISPLAY_TYPE_HDMI)
+ if (omap_encoder->output->type == OMAP_DISPLAY_TYPE_HDMI)
omap_encoder_hdmi_mode_set(encoder, adjusted_mode);
}
@@ -161,7 +161,7 @@ static void omap_encoder_disable(struct drm_encoder *encoder)
* DSI is treated as an exception as DSI pipelines still use the legacy
* flow where the pipeline output controls the encoder.
*/
- if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
+ if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
dssdev->ops->disable(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
@@ -189,7 +189,7 @@ static void omap_encoder_enable(struct drm_encoder *encoder)
* DSI is treated as an exception as DSI pipelines still use the legacy
* flow where the pipeline output controls the encoder.
*/
- if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
+ if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
dssdev->ops->enable(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
}
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 35/50] drm: Clarify definition of the DRM_BUS_FLAG_(PIXDATA|SYNC)_* macros
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (33 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 34/50] drm/omap: Merge omap_dss_device type and output_type fields Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 36/50] drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags Laurent Pinchart
` (14 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DRM_BUS_FLAG_PIXDATA_POSEDGE and DRM_BUS_FLAG_PIXDATA_NEGEDGE macros
and their DRM_BUS_FLAG_SYNC_* counterparts define on which pixel clock
edge data and sync signals are driven. They are however used in some
drivers to define on which pixel clock edge data and sync signals are
sampled, which should usually (but not always) be the opposite edge of
the driving edge. This creates confusion.
Create four new macros for both PIXDATA and SYNC that explicitly state
the driving and sampling edge in their name to remove the confusion. The
driving macros are defined as the opposite of the sampling macros to
made code simpler based on the assumption that the driving and sampling
edges are opposite.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Address the DRM_BUS_FLAG_SYNC_* flags
- Rebase on top of drm-next
---
include/drm/drm_connector.h | 36 ++++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 994161374a49..fa6b8af611b3 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -330,19 +330,47 @@ struct drm_display_info {
#define DRM_BUS_FLAG_DE_LOW (1<<0)
#define DRM_BUS_FLAG_DE_HIGH (1<<1)
-/* drive data on pos. edge */
+
+/*
+ * Don't use those two flags directly, use the DRM_BUS_FLAG_PIXDATA_DRIVE_*
+ * and DRM_BUS_FLAG_PIXDATA_SAMPLE_* variants to qualify the flags explicitly.
+ * The DRM_BUS_FLAG_PIXDATA_SAMPLE_* flags are defined as the opposite of the
+ * DRM_BUS_FLAG_PIXDATA_DRIVE_* flags to make code simpler, as signals are
+ * usually to be sampled on the opposite edge of the driving edge.
+ */
#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
-/* drive data on neg. edge */
#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+
+/* Drive data on rising edge */
+#define DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE DRM_BUS_FLAG_PIXDATA_POSEDGE
+/* Drive data on falling edge */
+#define DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE DRM_BUS_FLAG_PIXDATA_NEGEDGE
+/* Sample data on rising edge */
+#define DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE DRM_BUS_FLAG_PIXDATA_NEGEDGE
+/* Sample data on falling edge */
+#define DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE DRM_BUS_FLAG_PIXDATA_POSEDGE
+
/* data is transmitted MSB to LSB on the bus */
#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4)
/* data is transmitted LSB to MSB on the bus */
#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5)
-/* drive sync on pos. edge */
+
+/*
+ * Similarly to the DRM_BUS_FLAG_PIXDATA_* flags, don't use these two flags
+ * directly, use one of the DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_* instead.
+ */
#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<6)
-/* drive sync on neg. edge */
#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<7)
+/* Drive sync on rising edge */
+#define DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE DRM_BUS_FLAG_SYNC_POSEDGE
+/* Drive sync on falling edge */
+#define DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE DRM_BUS_FLAG_SYNC_NEGEDGE
+/* Sample sync on rising edge */
+#define DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE DRM_BUS_FLAG_SYNC_NEGEDGE
+/* Sample sync on falling edge */
+#define DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE DRM_BUS_FLAG_SYNC_POSEDGE
+
/**
* @bus_flags: Additional information (like pixel signal polarity) for
* the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 36/50] drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (34 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 35/50] drm: Clarify definition of the DRM_BUS_FLAG_(PIXDATA|SYNC)_* macros Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 37/50] drm/bridge: use bus flags in bridge timings Laurent Pinchart
` (13 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the
new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and
new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them
through the code.
This effectively changes the value of the .sampling_edge bridge timings
field in the dumb-vga-dac driver. This is safe to do as no driver
consumes these values yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Clarify commit message
- Address the DRM_BUS_FLAG_SYNC_* flags
- Rebase on top of drm-next
---
drivers/gpu/drm/bridge/dumb-vga-dac.c | 6 ++---
drivers/gpu/drm/drm_modes.c | 12 +++++-----
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 +-
drivers/gpu/drm/imx/ipuv3-crtc.c | 2 +-
drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 6 ++---
.../gpu/drm/omapdrm/displays/encoder-tfp410.c | 5 ++--
.../displays/panel-lgphilips-lb035q02.c | 5 ++--
.../omapdrm/displays/panel-nec-nl8048hl11.c | 5 ++--
.../displays/panel-sharp-ls037v7dw01.c | 5 ++--
.../omapdrm/displays/panel-sony-acx565akm.c | 5 ++--
.../omapdrm/displays/panel-tpo-td028ttec1.c | 5 ++--
.../omapdrm/displays/panel-tpo-td043mtea1.c | 5 ++--
drivers/gpu/drm/omapdrm/dss/dsi.c | 4 ++--
drivers/gpu/drm/omapdrm/dss/sdi.c | 4 ++--
drivers/gpu/drm/omapdrm/omap_encoder.c | 8 +++----
drivers/gpu/drm/panel/panel-arm-versatile.c | 4 ++--
drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 4 ++--
drivers/gpu/drm/panel/panel-seiko-43wvf1g.c | 2 +-
drivers/gpu/drm/panel/panel-simple.c | 24 +++++++++----------
drivers/gpu/drm/pl111/pl111_display.c | 2 +-
drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++--
drivers/gpu/drm/tve200/tve200_display.c | 3 ++-
include/drm/drm_bridge.h | 9 +++----
23 files changed, 70 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index 0805801f4e94..94ed450e308d 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -234,7 +234,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
*/
static const struct drm_bridge_timings default_dac_timings = {
/* Timing specifications, datasheet page 7 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
.setup_time_ps = 500,
.hold_time_ps = 1500,
};
@@ -245,7 +245,7 @@ static const struct drm_bridge_timings default_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8134_dac_timings = {
/* From timing diagram, datasheet page 9 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 12 */
.setup_time_ps = 3000,
/* I guess this means latched input */
@@ -258,7 +258,7 @@ static const struct drm_bridge_timings ti_ths8134_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8135_dac_timings = {
/* From timing diagram, datasheet page 14 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 16 */
.setup_time_ps = 2000,
.hold_time_ps = 500,
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index adce9a26bac9..fc0d345dc424 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -655,22 +655,22 @@ EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);
* @bus_flags: information about pixelclk, sync and DE polarity will be stored
* here
*
- * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and
- * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS
+ * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_DRIVE_(POS|NEG)EDGE
+ * and DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS
* found in @vm
*/
void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags)
{
*bus_flags = 0;
if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
- *bus_flags |= DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
- *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ *bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE)
- *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE;
+ *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE;
if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE)
- *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE;
+ *bus_flags |= DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE;
if (vm->flags & DISPLAY_FLAGS_DE_LOW)
*bus_flags |= DRM_BUS_FLAG_DE_LOW;
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index bf256971063d..83c841b50272 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -94,7 +94,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
drm_display_mode_to_videomode(mode, &vm);
/* INV_PXCK as default (most display sample data on rising edge) */
- if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
+ if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE))
pol |= DCU_SYN_POL_INV_PXCK;
if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
index 3c62167a9251..a16e454a57de 100644
--- a/drivers/gpu/drm/imx/ipuv3-crtc.c
+++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
@@ -269,7 +269,7 @@ static void ipu_crtc_mode_set_nofb(struct drm_crtc *crtc)
sig_cfg.enable_pol = !(imx_crtc_state->bus_flags & DRM_BUS_FLAG_DE_LOW);
/* Default to driving pixel data on negative clock edges */
sig_cfg.clk_pol = !!(imx_crtc_state->bus_flags &
- DRM_BUS_FLAG_PIXDATA_POSEDGE);
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE);
sig_cfg.bus_format = imx_crtc_state->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = imx_crtc_state->di_hsync_pin;
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 0ee1ca8a316a..98e9bda91e80 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -253,12 +253,12 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
if (!(bus_flags & DRM_BUS_FLAG_DE_LOW))
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
/*
- * DRM_BUS_FLAG_PIXDATA_ defines are controller centric,
+ * DRM_BUS_FLAG_PIXDATA_DRIVE_ defines are controller centric,
* controllers VDCTRL0_DOTCLK is display centric.
* Drive on positive edge -> display samples on falling edge
- * DRM_BUS_FLAG_PIXDATA_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING
+ * DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING
*/
- if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
index fb88537de1cc..de954182c4bb 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
@@ -86,8 +86,9 @@ static int tfp410_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(1) | BIT(0);
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
if (IS_ERR(dssdev->next)) {
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
index 4133351924be..99f2350d462c 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
@@ -207,8 +207,9 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
* DE is active LOW
* DATA needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
index 498a88307f04..c2409815a204 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
@@ -196,8 +196,9 @@ static int nec_8048_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
index 1e68e0d14f87..9c545de430f6 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
@@ -216,8 +216,9 @@ static int sharp_ls_probe(struct platform_device *pdev)
* Note: According to the panel documentation:
* DATA needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
index abee0b348cff..2038def14ba1 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
@@ -710,8 +710,9 @@ static int acx565akm_probe(struct spi_device *spi)
dssdev->owner = THIS_MODULE;
dssdev->of_ports = BIT(0);
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index 5b4fbcc196bc..fa80d4f7f699 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -330,8 +330,9 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 781dc8b0afe7..0b692fc7e5ea 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -429,8 +429,9 @@ static int tpo_td043_probe(struct spi_device *spi)
* Note: According to the panel documentation:
* SYNC needs to be driven on the FALLING edge
*/
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
+ | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
omapdss_display_init(dssdev);
omapdss_device_register(dssdev);
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 2582b566e0b0..5c34fba51975 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -5127,9 +5127,9 @@ static int dsi_init_output(struct dsi_data *dsi)
out->ops = &dsi_ops;
out->owner = THIS_MODULE;
out->of_ports = BIT(0);
- out->bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE
+ out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE
| DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_NEGEDGE;
+ | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE;
r = omapdss_device_init_output(out);
if (r < 0)
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index e7945322c471..7aae52984fed 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -279,8 +279,8 @@ static int sdi_init_output(struct sdi_device *sdi)
out->of_ports = BIT(1);
out->ops = &sdi_ops;
out->owner = THIS_MODULE;
- out->bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE /* 15.5.9.1.2 */
- | DRM_BUS_FLAG_SYNC_POSEDGE;
+ out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE /* 15.5.9.1.2 */
+ | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE;
r = omapdss_device_init_output(out);
if (r < 0)
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 42748479d374..b83a2ae64a03 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -114,17 +114,17 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
if (!(vm.flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE |
DISPLAY_FLAGS_PIXDATA_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ else if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
vm.flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
}
if (!(vm.flags & (DISPLAY_FLAGS_SYNC_POSEDGE |
DISPLAY_FLAGS_SYNC_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_SYNC_POSEDGE)
+ if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE)
vm.flags |= DISPLAY_FLAGS_SYNC_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_SYNC_NEGEDGE)
+ else if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
}
}
diff --git a/drivers/gpu/drm/panel/panel-arm-versatile.c b/drivers/gpu/drm/panel/panel-arm-versatile.c
index b428c4678106..078fa2c0eef8 100644
--- a/drivers/gpu/drm/panel/panel-arm-versatile.c
+++ b/drivers/gpu/drm/panel/panel-arm-versatile.c
@@ -191,7 +191,7 @@ static const struct versatile_panel_type versatile_panels[] = {
.vrefresh = 390,
.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
},
/*
* Sanyo ALR252RGT 240x320 portrait display found on the
@@ -215,7 +215,7 @@ static const struct versatile_panel_type versatile_panels[] = {
.vrefresh = 116,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
.ib2 = true,
},
};
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
index bd38bf4f1ba6..35497ff08391 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
@@ -412,11 +412,11 @@ static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili)
if (ili->conf->dclk_active_high) {
reg = ILI9322_POL_DCLK;
connector->display_info.bus_flags |=
- DRM_BUS_FLAG_PIXDATA_POSEDGE;
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
} else {
reg = 0;
connector->display_info.bus_flags |=
- DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
}
if (ili->conf->de_active_high) {
reg |= ILI9322_POL_DE;
diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
index 2d99e28ff117..bdcc5d80823d 100644
--- a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
+++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
@@ -328,7 +328,7 @@ static const struct seiko_panel_desc seiko_43wvf1g = {
.height = 57,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct of_device_id platform_of_match[] = {
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 9e8218f6a3f2..64516f23a957 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -914,7 +914,7 @@ static const struct panel_desc cdtech_s043wq26h_ct7 = {
.width = 95,
.height = 54,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode cdtech_s070wv95_ct16_mode = {
@@ -1034,7 +1034,7 @@ static const struct panel_desc dataimage_scf0700c48ggu18 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct display_timing dlc_dlc0700yzg_1_timing = {
@@ -1119,7 +1119,7 @@ static const struct panel_desc edt_et057090dhu = {
.height = 86,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
@@ -1145,7 +1145,7 @@ static const struct panel_desc edt_etm0700g0dh6 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
};
static const struct panel_desc edt_etm0700g0bdh6 = {
@@ -1157,7 +1157,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
.height = 91,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
@@ -1311,7 +1311,7 @@ static const struct panel_desc innolux_at043tn24 = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode innolux_at070tn92_mode = {
@@ -1818,7 +1818,7 @@ static const struct panel_desc nec_nl4827hc19_05b = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode netron_dy_e231732_mode = {
@@ -1867,8 +1867,8 @@ static const struct panel_desc newhaven_nhd_43_480272ef_atxl = {
.height = 54,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE |
- DRM_BUS_FLAG_SYNC_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
+ DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
};
static const struct display_timing nlt_nl192108ac18_02d_timing = {
@@ -2029,7 +2029,7 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.height = 93,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode pda_91_00156_a0_mode = {
@@ -2398,7 +2398,7 @@ static const struct panel_desc toshiba_lt089ac29000 = {
.height = 116,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode tpk_f07a_0102_mode = {
@@ -2421,7 +2421,7 @@ static const struct panel_desc tpk_f07a_0102 = {
.width = 152,
.height = 91,
},
- .bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
static const struct drm_display_mode tpk_f10a_0102_mode = {
diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 754f6b25f265..0c5d391f0a8f 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -188,7 +188,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
tim2 |= TIM2_IOE;
if (connector->display_info.bus_flags &
- DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
tim2 |= TIM2_IPC;
}
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 2bd2eda6480a..aefa42bf2b48 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -561,10 +561,10 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
* Following code is a way to avoid quirks all around TCON
* and DOTCLOCK drivers.
*/
- if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
clk_set_phase(tcon->dclk, 240);
- if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
clk_set_phase(tcon->dclk, 0);
regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
diff --git a/drivers/gpu/drm/tve200/tve200_display.c b/drivers/gpu/drm/tve200/tve200_display.c
index e8723a2412a6..d775d10dbe6a 100644
--- a/drivers/gpu/drm/tve200/tve200_display.c
+++ b/drivers/gpu/drm/tve200/tve200_display.c
@@ -149,7 +149,8 @@ static void tve200_display_enable(struct drm_simple_display_pipe *pipe,
/* Vsync IRQ at start of Vsync at first */
ctrl1 |= TVE200_VSTSTYPE_VSYNC;
- if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ if (connector->display_info.bus_flags &
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
ctrl1 |= TVE200_CTRL_TVCLKP;
if ((mode->hdisplay == 352 && mode->vdisplay == 240) || /* SIF(525) */
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 9da8c93f7976..5e5129206f40 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -246,10 +246,11 @@ struct drm_bridge_timings {
/**
* @sampling_edge:
*
- * Tells whether the bridge samples the digital input signal
- * from the display engine on the positive or negative edge of the
- * clock, this should reuse the DRM_BUS_FLAG_PIXDATA_[POS|NEG]EDGE
- * bitwise flags from the DRM connector (bit 2 and 3 valid).
+ * Tells whether the bridge samples the digital input signals from the
+ * display engine on the positive or negative edge of the clock. This
+ * should use the DRM_BUS_FLAG_PIXDATA_SAMPLE_[POS|NEG]EDGE and
+ * DRM_BUS_FLAG_SYNC_SAMPLE_[POS|NEG]EDGE bitwise flags from the DRM
+ * connector (bit 2, 3, 6 and 7 valid).
*/
u32 sampling_edge;
/**
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 37/50] drm/bridge: use bus flags in bridge timings
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (35 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 36/50] drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 38/50] dt-bindings: display: tfp410: Add bus parameters properties Laurent Pinchart
` (12 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
From: Stefan Agner <stefan@agner.ch>
The DRM bus flags convey additional information on pixel data on
the bus. All current available bus flags might be of interest for
a bridge. Remove the sampling_edge field and use bus_flags.
In the case at hand a dumb VGA bridge needs a specific data enable
polarity (DRM_BUS_FLAG_DE_LOW).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v1:
- Renamed bus_flags to input_bus_flags
---
drivers/gpu/drm/bridge/dumb-vga-dac.c | 6 +++---
include/drm/drm_bridge.h | 12 +++++-------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index 94ed450e308d..e64736c39a9f 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -234,7 +234,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
*/
static const struct drm_bridge_timings default_dac_timings = {
/* Timing specifications, datasheet page 7 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
.setup_time_ps = 500,
.hold_time_ps = 1500,
};
@@ -245,7 +245,7 @@ static const struct drm_bridge_timings default_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8134_dac_timings = {
/* From timing diagram, datasheet page 9 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 12 */
.setup_time_ps = 3000,
/* I guess this means latched input */
@@ -258,7 +258,7 @@ static const struct drm_bridge_timings ti_ths8134_dac_timings = {
*/
static const struct drm_bridge_timings ti_ths8135_dac_timings = {
/* From timing diagram, datasheet page 14 */
- .sampling_edge = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
/* From datasheet, page 16 */
.setup_time_ps = 2000,
.hold_time_ps = 500,
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 5e5129206f40..d4428913a4e1 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -244,15 +244,13 @@ struct drm_bridge_funcs {
*/
struct drm_bridge_timings {
/**
- * @sampling_edge:
+ * @input_bus_flags:
*
- * Tells whether the bridge samples the digital input signals from the
- * display engine on the positive or negative edge of the clock. This
- * should use the DRM_BUS_FLAG_PIXDATA_SAMPLE_[POS|NEG]EDGE and
- * DRM_BUS_FLAG_SYNC_SAMPLE_[POS|NEG]EDGE bitwise flags from the DRM
- * connector (bit 2, 3, 6 and 7 valid).
+ * Tells what additional settings for the pixel data on the bus
+ * this bridge requires (like pixel signal polarity). See also
+ * &drm_display_info->bus_flags.
*/
- u32 sampling_edge;
+ u32 input_bus_flags;
/**
* @setup_time_ps:
*
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 38/50] dt-bindings: display: tfp410: Add bus parameters properties
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (36 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 37/50] drm/bridge: use bus flags in bridge timings Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 39/50] drm/bridge: ti-tfp410: Set connector type based on DT connector node Laurent Pinchart
` (11 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The TFP410 supports configuration of several input bus parameters
through either the I2C port or chip pins. In the latter case, we need to
specify those parameters in DT.
Two new properties are added, ti,deskew to specify the data de-skew
configuration (as set through the DK[3:1] pins), and pclk-sample to
specify the pixel clock sampling edge (as set through the EDGE pin).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/display/bridge/ti,tfp410.txt | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
index 54d7e31525ec..3f903af93949 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -6,15 +6,25 @@ Required properties:
Optional properties:
- powerdown-gpios: power-down gpio
-- reg: I2C address. If and only if present the device node
- should be placed into the i2c controller node where the
- tfp410 i2c is connected to.
+- reg: I2C address. If and only if present the device node should be placed
+ into the I2C controller node where the TFP410 I2C is connected to.
+- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured
+ through th DK[3:1] pins. This property shall be present only if the TFP410
+ is not connected through I2C.
Required nodes:
-- Video port 0 for DPI input [1].
-- Video port 1 for DVI output [1].
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+This device has two video ports. Their connections are modeled using the OF
+graph bindings specified in [1]. Each port node shall have a single endpoint.
+
+- Port 0 is the DPI input port. Its endpoint subnode shall contain a
+ pclk-sample property and a remote-endpoint property as specified in [1].
+
+- Port 1 is the DVI output port. Its endpoint subnode shall contain a
+ remote-endpoint property is specified in [1].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+
Example
-------
@@ -22,6 +32,7 @@ Example
tfp410: encoder@0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+ ti,deskew = <4>;
ports {
#address-cells = <1>;
@@ -31,6 +42,7 @@ tfp410: encoder@0 {
reg = <0>;
tfp410_in: endpoint@0 {
+ pclk-sample = <1>;
remote-endpoint = <&dpi_out>;
};
};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 39/50] drm/bridge: ti-tfp410: Set connector type based on DT connector node
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (37 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 38/50] dt-bindings: display: tfp410: Add bus parameters properties Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 40/50] drm/bridge: ti-tfp410: Add support for the powerdown GPIO Laurent Pinchart
` (10 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The TI TFP410 is a DVI encoder, not a full HDMI encoder. Its output can
be routed to a DVI-D connector, even if in many cases embedded systems
will use an HDMI connector to carry the DVI signals.
Instead of hardcoding the connector type to HDMI, retrieve the connector
type from its DT node.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/bridge/ti-tfp410.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index 7bfb4f338813..daf0967e00ba 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -27,6 +27,7 @@
struct tfp410 {
struct drm_bridge bridge;
struct drm_connector connector;
+ unsigned int connector_type;
struct i2c_adapter *ddc;
struct gpio_desc *hpd;
@@ -126,7 +127,7 @@ static int tfp410_attach(struct drm_bridge *bridge)
drm_connector_helper_add(&dvi->connector,
&tfp410_con_helper_funcs);
ret = drm_connector_init(bridge->dev, &dvi->connector,
- &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA);
+ &tfp410_con_funcs, dvi->connector_type);
if (ret) {
dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
return ret;
@@ -172,6 +173,11 @@ static int tfp410_get_connector_properties(struct tfp410 *dvi)
if (!connector_node)
return -ENODEV;
+ if (of_device_is_compatible(connector_node, "hdmi-connector"))
+ dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ else
+ dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
+
dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
"hpd-gpios", 0, GPIOD_IN, "hpd");
if (IS_ERR(dvi->hpd)) {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 40/50] drm/bridge: ti-tfp410: Add support for the powerdown GPIO
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (38 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 39/50] drm/bridge: ti-tfp410: Set connector type based on DT connector node Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings Laurent Pinchart
` (9 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The TFP410 has a powerdown pin that can be connected to a GPIO to
control power saving. The DT bindings define a corresponding property,
but the driver doesn't implement support for it. Fix that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/bridge/ti-tfp410.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index daf0967e00ba..b0213d573434 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -32,6 +32,7 @@ struct tfp410 {
struct i2c_adapter *ddc;
struct gpio_desc *hpd;
struct delayed_work hpd_work;
+ struct gpio_desc *powerdown;
struct device *dev;
};
@@ -139,8 +140,24 @@ static int tfp410_attach(struct drm_bridge *bridge)
return 0;
}
+static void tfp410_enable(struct drm_bridge *bridge)
+{
+ struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
+
+ gpiod_set_value_cansleep(dvi->powerdown, 0);
+}
+
+static void tfp410_disable(struct drm_bridge *bridge)
+{
+ struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
+
+ gpiod_set_value_cansleep(dvi->powerdown, 1);
+}
+
static const struct drm_bridge_funcs tfp410_bridge_funcs = {
.attach = tfp410_attach,
+ .enable = tfp410_enable,
+ .disable = tfp410_disable,
};
static void tfp410_hpd_work_func(struct work_struct *work)
@@ -229,6 +246,13 @@ static int tfp410_init(struct device *dev)
if (ret)
goto fail;
+ dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(dvi->powerdown)) {
+ dev_err(dev, "failed to parse powerdown gpio\n");
+ return PTR_ERR(dvi->powerdown);
+ }
+
if (dvi->hpd) {
INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (39 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 40/50] drm/bridge: ti-tfp410: Add support for the powerdown GPIO Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-28 10:27 ` Tomi Valkeinen
2019-02-11 9:46 ` [PATCH v3 42/50] dt-bindings: Add vendor prefix for OSD Displays Laurent Pinchart
` (8 subsequent siblings)
49 siblings, 1 reply; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The TFP410 supports configurable pixel clock sampling edge and data
de-skew adjustments. The configuration can be set through I2C or
dedicated chip pins.
Report the configuration through the drm_bridge timings. As the
ti-tftp410 driver doesn't support configuring the chip through I2C, we
simply use the default configuration in that case. When the chip is
configured through dedicated pins, we parse the configuration from DT.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/bridge/ti-tfp410.c | 77 ++++++++++++++++++++++++++++--
1 file changed, 74 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index b0213d573434..285be4a0f4bd 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -34,6 +34,8 @@ struct tfp410 {
struct delayed_work hpd_work;
struct gpio_desc *powerdown;
+ struct drm_bridge_timings timings;
+
struct device *dev;
};
@@ -180,6 +182,70 @@ static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg)
return IRQ_HANDLED;
}
+static const struct drm_bridge_timings tfp410_default_timings = {
+ .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
+ | DRM_BUS_FLAG_DE_HIGH,
+ .setup_time_ps = 1200,
+ .hold_time_ps = 1300,
+};
+
+static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
+{
+ struct drm_bridge_timings *timings = &dvi->timings;
+ struct device_node *ep;
+ u32 pclk_sample = 0;
+ s32 deskew = 0;
+
+ /* Start with defaults. */
+ *timings = tfp410_default_timings;
+
+ if (i2c)
+ /*
+ * In I2C mode timings are configured through the I2C interface.
+ * As the driver doesn't support I2C configuration yet, we just
+ * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1).
+ */
+ return 0;
+
+ /*
+ * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN
+ * and EDGE pins. They are specified in DT through endpoint properties
+ * and vendor-specific properties.
+ */
+ ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
+ if (!ep)
+ return -EINVAL;
+
+ /* Get the sampling edge from the endpoint. */
+ of_property_read_u32(ep, "pclk-sample", &pclk_sample);
+ of_node_put(ep);
+
+ timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
+
+ switch (pclk_sample) {
+ case 0:
+ timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
+ | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
+ break;
+ case 1:
+ timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
+ | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Get the setup and hold time from vendor-specific properties. */
+ of_property_read_u32(dvi->dev->of_node, "ti,deskew", (u32 *)&deskew);
+ if (deskew < -4 || deskew > 3)
+ return -EINVAL;
+
+ timings->setup_time_ps = min(0, 1200 - 350 * deskew);
+ timings->hold_time_ps = min(0, 1300 + 350 * deskew);
+
+ return 0;
+}
+
static int tfp410_get_connector_properties(struct tfp410 *dvi)
{
struct device_node *connector_node, *ddc_phandle;
@@ -223,7 +289,7 @@ static int tfp410_get_connector_properties(struct tfp410 *dvi)
return ret;
}
-static int tfp410_init(struct device *dev)
+static int tfp410_init(struct device *dev, bool i2c)
{
struct tfp410 *dvi;
int ret;
@@ -240,8 +306,13 @@ static int tfp410_init(struct device *dev)
dvi->bridge.funcs = &tfp410_bridge_funcs;
dvi->bridge.of_node = dev->of_node;
+ dvi->bridge.timings = &dvi->timings;
dvi->dev = dev;
+ ret = tfp410_parse_timings(dvi, i2c);
+ if (ret)
+ goto fail;
+
ret = tfp410_get_connector_properties(dvi);
if (ret)
goto fail;
@@ -294,7 +365,7 @@ static int tfp410_fini(struct device *dev)
static int tfp410_probe(struct platform_device *pdev)
{
- return tfp410_init(&pdev->dev);
+ return tfp410_init(&pdev->dev, false);
}
static int tfp410_remove(struct platform_device *pdev)
@@ -331,7 +402,7 @@ static int tfp410_i2c_probe(struct i2c_client *client,
return -ENXIO;
}
- return tfp410_init(&client->dev);
+ return tfp410_init(&client->dev, true);
}
static int tfp410_i2c_remove(struct i2c_client *client)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-02-11 9:46 ` [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings Laurent Pinchart
@ 2019-02-28 10:27 ` Tomi Valkeinen
2019-02-28 10:31 ` Tomi Valkeinen
0 siblings, 1 reply; 59+ messages in thread
From: Tomi Valkeinen @ 2019-02-28 10:27 UTC (permalink / raw)
To: Laurent Pinchart, dri-devel
Hi Laurent,
On 11/02/2019 11:46, Laurent Pinchart wrote:
> + /* Get the sampling edge from the endpoint. */
> + of_property_read_u32(ep, "pclk-sample", &pclk_sample);
> + of_node_put(ep);
> +
> + timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
> +
> + switch (pclk_sample) {
> + case 0:
> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
> + break;
> + case 1:
> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
> + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
> + break;
> + default:
> + return -EINVAL;
> + }
The default for pclk_sample is just the opposite of what omapdrm's
tfp410 used to do. The dts doc file also says that pclk-sample is
required, but the driver works fine without it, defaulting to 0.
This means that none of the omap dts files with tfp410 work correctly,
instead they silently use the wrong settings which may work but easily
also won't...
As the bus flags are added in this patch for the first time, maybe we
can assume that no one is using them, and the default could be made to
be the same as was on omapdrm's tfp410?
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-02-28 10:27 ` Tomi Valkeinen
@ 2019-02-28 10:31 ` Tomi Valkeinen
2019-03-15 11:30 ` Peter Ujfalusi
0 siblings, 1 reply; 59+ messages in thread
From: Tomi Valkeinen @ 2019-02-28 10:31 UTC (permalink / raw)
To: Laurent Pinchart, dri-devel
On 28/02/2019 12:27, Tomi Valkeinen wrote:
> Hi Laurent,
>
> On 11/02/2019 11:46, Laurent Pinchart wrote:
>
>> + /* Get the sampling edge from the endpoint. */
>> + of_property_read_u32(ep, "pclk-sample", &pclk_sample);
>> + of_node_put(ep);
>> +
>> + timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
>> +
>> + switch (pclk_sample) {
>> + case 0:
>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
>> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
>> + break;
>> + case 1:
>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
>> + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>
> The default for pclk_sample is just the opposite of what omapdrm's
> tfp410 used to do. The dts doc file also says that pclk-sample is
> required, but the driver works fine without it, defaulting to 0.
>
> This means that none of the omap dts files with tfp410 work correctly,
> instead they silently use the wrong settings which may work but easily
> also won't...
>
> As the bus flags are added in this patch for the first time, maybe we
> can assume that no one is using them, and the default could be made to
> be the same as was on omapdrm's tfp410?
Aaaand never mind. In omapdrm's driver we were using
DRM_BUS_FLAG_SYNC_DRIVE_* variant, here we have SAMPLE variant. So it's
fine =).
Sorry for the noise.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-02-28 10:31 ` Tomi Valkeinen
@ 2019-03-15 11:30 ` Peter Ujfalusi
2019-03-15 12:07 ` Tomi Valkeinen
0 siblings, 1 reply; 59+ messages in thread
From: Peter Ujfalusi @ 2019-03-15 11:30 UTC (permalink / raw)
To: Tomi Valkeinen, Laurent Pinchart, dri-devel
On 28/02/2019 12.31, Tomi Valkeinen wrote:
> On 28/02/2019 12:27, Tomi Valkeinen wrote:
>> Hi Laurent,
>>
>> On 11/02/2019 11:46, Laurent Pinchart wrote:
>>
>>> + /* Get the sampling edge from the endpoint. */
>>> + of_property_read_u32(ep, "pclk-sample", &pclk_sample);
>>> + of_node_put(ep);
>>> +
>>> + timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
>>> +
>>> + switch (pclk_sample) {
>>> + case 0:
>>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
>>> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
>>> + break;
>>> + case 1:
>>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
>>> + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>
>> The default for pclk_sample is just the opposite of what omapdrm's
>> tfp410 used to do. The dts doc file also says that pclk-sample is
>> required, but the driver works fine without it, defaulting to 0.
>>
>> This means that none of the omap dts files with tfp410 work correctly,
>> instead they silently use the wrong settings which may work but easily
>> also won't...
>>
>> As the bus flags are added in this patch for the first time, maybe we
>> can assume that no one is using them, and the default could be made to
>> be the same as was on omapdrm's tfp410?
>
> Aaaand never mind. In omapdrm's driver we were using
> DRM_BUS_FLAG_SYNC_DRIVE_* variant, here we have SAMPLE variant. So it's
> fine =).
If the pclk-sample is not defined in DT, it will default to 0 which
selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
But all the boards where I can find schematics with tfp410 have their
EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
then tfp410 will sample on the rising edge.
imho the pclk_sample should be initialized to 1 to avoid regression for
most of the boards using tfp410.
>
> Sorry for the noise.
>
> Tomi
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-03-15 11:30 ` Peter Ujfalusi
@ 2019-03-15 12:07 ` Tomi Valkeinen
2019-03-15 12:28 ` Peter Ujfalusi
0 siblings, 1 reply; 59+ messages in thread
From: Tomi Valkeinen @ 2019-03-15 12:07 UTC (permalink / raw)
To: Peter Ujfalusi, Laurent Pinchart, dri-devel
On 15/03/2019 13:30, Peter Ujfalusi wrote:
>
>
> On 28/02/2019 12.31, Tomi Valkeinen wrote:
>> On 28/02/2019 12:27, Tomi Valkeinen wrote:
>>> Hi Laurent,
>>>
>>> On 11/02/2019 11:46, Laurent Pinchart wrote:
>>>
>>>> + /* Get the sampling edge from the endpoint. */
>>>> + of_property_read_u32(ep, "pclk-sample", &pclk_sample);
>>>> + of_node_put(ep);
>>>> +
>>>> + timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;
>>>> +
>>>> + switch (pclk_sample) {
>>>> + case 0:
>>>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
>>>> + | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
>>>> + break;
>>>> + case 1:
>>>> + timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE
>>>> + | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE;
>>>> + break;
>>>> + default:
>>>> + return -EINVAL;
>>>> + }
>>>
>>> The default for pclk_sample is just the opposite of what omapdrm's
>>> tfp410 used to do. The dts doc file also says that pclk-sample is
>>> required, but the driver works fine without it, defaulting to 0.
>>>
>>> This means that none of the omap dts files with tfp410 work correctly,
>>> instead they silently use the wrong settings which may work but easily
>>> also won't...
>>>
>>> As the bus flags are added in this patch for the first time, maybe we
>>> can assume that no one is using them, and the default could be made to
>>> be the same as was on omapdrm's tfp410?
>>
>> Aaaand never mind. In omapdrm's driver we were using
>> DRM_BUS_FLAG_SYNC_DRIVE_* variant, here we have SAMPLE variant. So it's
>> fine =).
>
> If the pclk-sample is not defined in DT, it will default to 0 which
> selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
>
> But all the boards where I can find schematics with tfp410 have their
> EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
> then tfp410 will sample on the rising edge.
>
> imho the pclk_sample should be initialized to 1 to avoid regression for
> most of the boards using tfp410.
Define "regression" =). If the omapdrm driver was always using
DRIVE_POSEDGE, this driver should also be using DRIVE_POSEDGE, no? If it
does the same as the old driver, it can't be a regression. This is, of
course, only considering omapdrm based boards.
That said, it sounds odd that this would be wrong in the old driver, but
then again, it might well be, as code related to these sync signals has
changed sooo many times, and the related DSS registers are somewhat
confusing.
That gave me an idea, I need to write an rwmem script to print the DSS
sync flags in plain english...
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-03-15 12:07 ` Tomi Valkeinen
@ 2019-03-15 12:28 ` Peter Ujfalusi
2019-03-15 13:30 ` Tomi Valkeinen
0 siblings, 1 reply; 59+ messages in thread
From: Peter Ujfalusi @ 2019-03-15 12:28 UTC (permalink / raw)
To: Tomi Valkeinen, Laurent Pinchart, dri-devel
On 15/03/2019 14.07, Tomi Valkeinen wrote:
>> If the pclk-sample is not defined in DT, it will default to 0 which
>> selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
>>
>> But all the boards where I can find schematics with tfp410 have their
>> EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
>> then tfp410 will sample on the rising edge.
>>
>> imho the pclk_sample should be initialized to 1 to avoid regression for
>> most of the boards using tfp410.
>
> Define "regression" =). If the omapdrm driver was always using
> DRIVE_POSEDGE, this driver should also be using DRIVE_POSEDGE, no? If it
> does the same as the old driver, it can't be a regression. This is, of
> course, only considering omapdrm based boards.
>
> That said, it sounds odd that this would be wrong in the old driver, but
> then again, it might well be, as code related to these sync signals has
> changed sooo many times, and the related DSS registers are somewhat
> confusing.
On the boards data skew is enabled as well with maximum delay selected
with DK1=DK2=DK3=1, so sampling of data is delayed by 3 * 350 ps, so
about 1 ns, not much, but might be enough for the signal to transition
on the bus so even if the HW drivers on POSEDGE and tfp410 samples on
POSEDGE (+1ns delay from the edge) we don't see corruption?
> That gave me an idea, I need to write an rwmem script to print the DSS
> sync flags in plain english...
>
> Tomi
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-03-15 12:28 ` Peter Ujfalusi
@ 2019-03-15 13:30 ` Tomi Valkeinen
2019-03-15 14:04 ` Peter Ujfalusi
2019-03-18 0:00 ` Laurent Pinchart
0 siblings, 2 replies; 59+ messages in thread
From: Tomi Valkeinen @ 2019-03-15 13:30 UTC (permalink / raw)
To: Peter Ujfalusi, Laurent Pinchart, dri-devel
On 15/03/2019 14:28, Peter Ujfalusi wrote:
> On 15/03/2019 14.07, Tomi Valkeinen wrote:
>>> If the pclk-sample is not defined in DT, it will default to 0 which
>>> selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
>>>
>>> But all the boards where I can find schematics with tfp410 have their
>>> EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
>>> then tfp410 will sample on the rising edge.
>>>
>>> imho the pclk_sample should be initialized to 1 to avoid regression for
>>> most of the boards using tfp410.
>>
>> Define "regression" =). If the omapdrm driver was always using
>> DRIVE_POSEDGE, this driver should also be using DRIVE_POSEDGE, no? If it
>> does the same as the old driver, it can't be a regression. This is, of
>> course, only considering omapdrm based boards.
>>
>> That said, it sounds odd that this would be wrong in the old driver, but
>> then again, it might well be, as code related to these sync signals has
>> changed sooo many times, and the related DSS registers are somewhat
>> confusing.
>
> On the boards data skew is enabled as well with maximum delay selected
> with DK1=DK2=DK3=1, so sampling of data is delayed by 3 * 350 ps, so
> about 1 ns, not much, but might be enough for the signal to transition
> on the bus so even if the HW drivers on POSEDGE and tfp410 samples on
> POSEDGE (+1ns delay from the edge) we don't see corruption?
Ok. I don't think anyone has looked at it that closely. So, the syncs
could well be wrong. Still, not a regression if it's the same way as it was.
If the fixed default works fine (or better) than the wrong ones, I think
that can be the default. But I'd be careful about changing what the
default is, if we've had it the old way for a long time.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-03-15 13:30 ` Tomi Valkeinen
@ 2019-03-15 14:04 ` Peter Ujfalusi
2019-03-18 0:00 ` Laurent Pinchart
1 sibling, 0 replies; 59+ messages in thread
From: Peter Ujfalusi @ 2019-03-15 14:04 UTC (permalink / raw)
To: Tomi Valkeinen, Laurent Pinchart, dri-devel
On 15/03/2019 15.30, Tomi Valkeinen wrote:
> On 15/03/2019 14:28, Peter Ujfalusi wrote:
>> On 15/03/2019 14.07, Tomi Valkeinen wrote:
>>>> If the pclk-sample is not defined in DT, it will default to 0 which
>>>> selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
>>>>
>>>> But all the boards where I can find schematics with tfp410 have their
>>>> EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
>>>> then tfp410 will sample on the rising edge.
>>>>
>>>> imho the pclk_sample should be initialized to 1 to avoid regression for
>>>> most of the boards using tfp410.
>>>
>>> Define "regression" =). If the omapdrm driver was always using
>>> DRIVE_POSEDGE, this driver should also be using DRIVE_POSEDGE, no? If it
>>> does the same as the old driver, it can't be a regression. This is, of
>>> course, only considering omapdrm based boards.
>>>
>>> That said, it sounds odd that this would be wrong in the old driver, but
>>> then again, it might well be, as code related to these sync signals has
>>> changed sooo many times, and the related DSS registers are somewhat
>>> confusing.
>>
>> On the boards data skew is enabled as well with maximum delay selected
>> with DK1=DK2=DK3=1, so sampling of data is delayed by 3 * 350 ps, so
>> about 1 ns, not much, but might be enough for the signal to transition
>> on the bus so even if the HW drivers on POSEDGE and tfp410 samples on
>> POSEDGE (+1ns delay from the edge) we don't see corruption?
>
> Ok. I don't think anyone has looked at it that closely. So, the syncs
> could well be wrong. Still, not a regression if it's the same way as it was.
True.
> If the fixed default works fine (or better) than the wrong ones, I think
> that can be the default. But I'd be careful about changing what the
> default is, if we've had it the old way for a long time.
The HW default in I2C mode is the EDGE=1 so SAMPLE_POSEDGE and it looks
to me that the same default was implemented via hw control on the boards
I can access the schematics.
If it was the other way in the past, then it is safer to not change the
default in the driver, but probably put a comment somewhere that the HW
default is the opposite?
In any case if the i2c control is implemented we will read and/or
configure the tfp410 anyways.
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread
* Re: [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings
2019-03-15 13:30 ` Tomi Valkeinen
2019-03-15 14:04 ` Peter Ujfalusi
@ 2019-03-18 0:00 ` Laurent Pinchart
1 sibling, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-03-18 0:00 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: Peter Ujfalusi, dri-devel
Hi Tomi,
On Fri, Mar 15, 2019 at 03:30:11PM +0200, Tomi Valkeinen wrote:
> On 15/03/2019 14:28, Peter Ujfalusi wrote:
> > On 15/03/2019 14.07, Tomi Valkeinen wrote:
> >>> If the pclk-sample is not defined in DT, it will default to 0 which
> >>> selects SAMPLE_NEGEDGE (== DRIVE_POSEDGE), right?
> >>>
> >>> But all the boards where I can find schematics with tfp410 have their
> >>> EDGE/HTPLG pin pulled up and according to the documentation when EDGE=1
> >>> then tfp410 will sample on the rising edge.
> >>>
> >>> imho the pclk_sample should be initialized to 1 to avoid regression for
> >>> most of the boards using tfp410.
> >>
> >> Define "regression" =). If the omapdrm driver was always using
> >> DRIVE_POSEDGE, this driver should also be using DRIVE_POSEDGE, no? If it
> >> does the same as the old driver, it can't be a regression. This is, of
> >> course, only considering omapdrm based boards.
> >>
> >> That said, it sounds odd that this would be wrong in the old driver, but
> >> then again, it might well be, as code related to these sync signals has
> >> changed sooo many times, and the related DSS registers are somewhat
> >> confusing.
> >
> > On the boards data skew is enabled as well with maximum delay selected
> > with DK1=DK2=DK3=1, so sampling of data is delayed by 3 * 350 ps, so
> > about 1 ns, not much, but might be enough for the signal to transition
> > on the bus so even if the HW drivers on POSEDGE and tfp410 samples on
> > POSEDGE (+1ns delay from the edge) we don't see corruption?
>
> Ok. I don't think anyone has looked at it that closely. So, the syncs
> could well be wrong. Still, not a regression if it's the same way as it was.
>
> If the fixed default works fine (or better) than the wrong ones, I think
> that can be the default. But I'd be careful about changing what the
> default is, if we've had it the old way for a long time.
I don't object changing the default (given proper testing), but that
should be done on top of this series then.
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 59+ messages in thread
* [PATCH v3 42/50] dt-bindings: Add vendor prefix for OSD Displays
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (40 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 41/50] drm/bridge: ti-tfp410: Report input bus config through bridge timings Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 43/50] dt-bindings: display: Add OSD Displays OSD070T1718-19TS panel binding Laurent Pinchart
` (7 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
OSD Displays is a panel manufacturer. It has been acquired by New Vision
Displays in 2015 but continues to operate under its own brand name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4f225ce815d8..675669cc6901 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -294,6 +294,7 @@ oranth Shenzhen Oranth Technology Co., Ltd.
ORCL Oracle Corporation
orisetech Orise Technology
ortustech Ortus Technology Co., Ltd.
+osddisplays OSD Displays
ovti OmniVision Technologies
oxsemi Oxford Semiconductor, Ltd.
panasonic Panasonic Corporation
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 43/50] dt-bindings: display: Add OSD Displays OSD070T1718-19TS panel binding
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (41 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 42/50] dt-bindings: Add vendor prefix for OSD Displays Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:46 ` [PATCH v3 44/50] drm/panel: simple: Add OSD070T1718-19TS panel support Laurent Pinchart
` (6 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The OSD Displays OSD070T1718-19TS is a 7" WVGA (800x480) 24bit RGB panel
and is compatible with the simple-panel bindings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v2:
- Specify which of the simple-panel properties are valid
---
.../display/panel/osddisplays,osd070t1718-19ts.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt
diff --git a/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt
new file mode 100644
index 000000000000..e57883ccdf2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt
@@ -0,0 +1,12 @@
+OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+
+Required properties:
+- compatible: shall be "osddisplays,osd070t1718-19ts"
+- power-supply: see simple-panel.txt
+
+Optional properties:
+- backlight: see simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory. No other simple-panel properties than
+the ones specified herein are valid.
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 44/50] drm/panel: simple: Add OSD070T1718-19TS panel support
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (42 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 43/50] dt-bindings: display: Add OSD Displays OSD070T1718-19TS panel binding Laurent Pinchart
@ 2019-02-11 9:46 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 45/50] drm/omap: Add support for drm_bridge Laurent Pinchart
` (5 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:46 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Add support for the OSD070T1718-19TS 7" 800x480 panel from One Stop
Displays to the panel-simple driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 64516f23a957..8fee7a8b29d9 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2032,6 +2032,32 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
};
+static const struct drm_display_mode osddisplays_osd070t1718_19ts_mode = {
+ .clock = 33000,
+ .hdisplay = 800,
+ .hsync_start = 800 + 210,
+ .hsync_end = 800 + 210 + 30,
+ .htotal = 800 + 210 + 30 + 16,
+ .vdisplay = 480,
+ .vsync_start = 480 + 22,
+ .vsync_end = 480 + 22 + 13,
+ .vtotal = 480 + 22 + 13 + 10,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc osddisplays_osd070t1718_19ts = {
+ .modes = &osddisplays_osd070t1718_19ts_mode,
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 152,
+ .height = 91,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+};
+
static const struct drm_display_mode pda_91_00156_a0_mode = {
.clock = 33300,
.hdisplay = 800,
@@ -2736,6 +2762,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "ortustech,com43h4m85ulc",
.data = &ortustech_com43h4m85ulc,
+ }, {
+ .compatible = "osddisplays,osd070t1718-19ts",
+ .data = &osddisplays_osd070t1718_19ts,
}, {
.compatible = "pda,91-00156-a0",
.data = &pda_91_00156_a0,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 45/50] drm/omap: Add support for drm_bridge
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (43 preceding siblings ...)
2019-02-11 9:46 ` [PATCH v3 44/50] drm/panel: simple: Add OSD070T1718-19TS panel support Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 46/50] drm/omap: Add support for drm_panel Laurent Pinchart
` (4 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Hook up drm_bridge support in the omapdrm driver. Despite the recent
extensive preparation work, this is a rather intrusive change, as the
management of outputs needs to be adapted through the driver to handle
both omap_dss_device and drm_bridge.
Connector creation is skipped when using a drm_bridge, as the bridge
creates the connector internally. This creates issues with systems that
split connector operations (such as modes retrieval and hot-plug
detection) across different bridges. These systems can't be supported
using drm_bridge for now (their support through the omap_dss_device
infrastructure is not affected), this will be fixed in subsequent
changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Changes since v2:
- Remove struct omap_drm_pipeline display field
Changes since v1:
- Fix typo in function name (updata -> update)
---
drivers/gpu/drm/omapdrm/dss/base.c | 27 ++++++++--
drivers/gpu/drm/omapdrm/dss/omapdss.h | 1 +
drivers/gpu/drm/omapdrm/dss/output.c | 21 +++++---
drivers/gpu/drm/omapdrm/omap_connector.c | 16 ++++--
drivers/gpu/drm/omapdrm/omap_connector.h | 1 -
drivers/gpu/drm/omapdrm/omap_crtc.c | 2 +-
drivers/gpu/drm/omapdrm/omap_drv.c | 69 +++++++++++++++++-------
drivers/gpu/drm/omapdrm/omap_drv.h | 1 -
drivers/gpu/drm/omapdrm/omap_encoder.c | 67 ++++++++++++++---------
9 files changed, 144 insertions(+), 61 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 81ea0f55cd75..09c9f2971aa2 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -19,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_graph.h>
+#include <linux/platform_device.h>
#include "dss.h"
#include "omapdss.h"
@@ -156,7 +157,7 @@ struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from)
goto done;
}
- if (dssdev->id && dssdev->next)
+ if (dssdev->id && (dssdev->next || dssdev->bridge))
goto done;
}
@@ -184,7 +185,18 @@ int omapdss_device_connect(struct dss_device *dss,
{
int ret;
- dev_dbg(dst->dev, "connect\n");
+ dev_dbg(&dss->pdev->dev, "connect(%s, %s)\n",
+ src ? dev_name(src->dev) : "NULL",
+ dst ? dev_name(dst->dev) : "NULL");
+
+ if (!dst) {
+ /*
+ * The destination is NULL when the source is connected to a
+ * bridge instead of a DSS device. Stop here, we will attach the
+ * bridge later when we will have a DRM encoder.
+ */
+ return src && src->bridge ? 0 : -EINVAL;
+ }
if (omapdss_device_is_connected(dst))
return -EBUSY;
@@ -204,7 +216,16 @@ EXPORT_SYMBOL_GPL(omapdss_device_connect);
void omapdss_device_disconnect(struct omap_dss_device *src,
struct omap_dss_device *dst)
{
- dev_dbg(dst->dev, "disconnect\n");
+ struct dss_device *dss = src ? src->dss : dst->dss;
+
+ dev_dbg(&dss->pdev->dev, "disconnect(%s, %s)\n",
+ src ? dev_name(src->dev) : "NULL",
+ dst ? dev_name(dst->dev) : "NULL");
+
+ if (!dst) {
+ WARN_ON(!src->bridge);
+ return;
+ }
if (!dst->id && !omapdss_device_is_connected(dst)) {
WARN_ON(!dst->display);
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index ab5467a1e92c..f47e9b94288f 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -410,6 +410,7 @@ struct omap_dss_device {
struct dss_device *dss;
struct omap_dss_device *next;
+ struct drm_bridge *bridge;
struct list_head list;
diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c
index f25ecfd26534..2a53025c2fde 100644
--- a/drivers/gpu/drm/omapdrm/dss/output.c
+++ b/drivers/gpu/drm/omapdrm/dss/output.c
@@ -20,25 +20,34 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_graph.h>
#include "dss.h"
#include "omapdss.h"
int omapdss_device_init_output(struct omap_dss_device *out)
{
- out->next = omapdss_of_find_connected_device(out->dev->of_node, 0);
- if (IS_ERR(out->next)) {
- if (PTR_ERR(out->next) != -EPROBE_DEFER)
- dev_err(out->dev, "failed to find video sink\n");
- return PTR_ERR(out->next);
+ struct device_node *remote_node;
+
+ remote_node = of_graph_get_remote_node(out->dev->of_node, 0, 0);
+ if (!remote_node) {
+ dev_dbg(out->dev, "failed to find video sink\n");
+ return 0;
}
+ out->next = omapdss_find_device_by_node(remote_node);
+ out->bridge = of_drm_find_bridge(remote_node);
+
+ of_node_put(remote_node);
+
if (out->next && out->type != out->next->type) {
dev_err(out->dev, "output type and display type don't match\n");
+ omapdss_device_put(out->next);
+ out->next = NULL;
return -EINVAL;
}
- return 0;
+ return out->next || out->bridge ? 0 : -EPROBE_DEFER;
}
EXPORT_SYMBOL(omapdss_device_init_output);
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index 9be33d9b8485..f711a267e2b6 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -299,9 +299,16 @@ static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
.mode_valid = omap_connector_mode_valid,
};
-static int omap_connector_get_type(struct omap_dss_device *display)
+static int omap_connector_get_type(struct omap_dss_device *output)
{
- switch (display->type) {
+ struct omap_dss_device *display;
+ enum omap_display_type type;
+
+ display = omapdss_display_get(output);
+ type = display->type;
+ omapdss_device_put(display);
+
+ switch (type) {
case OMAP_DISPLAY_TYPE_HDMI:
return DRM_MODE_CONNECTOR_HDMIA;
case OMAP_DISPLAY_TYPE_DVI:
@@ -324,14 +331,13 @@ static int omap_connector_get_type(struct omap_dss_device *display)
/* initialize connector */
struct drm_connector *omap_connector_init(struct drm_device *dev,
struct omap_dss_device *output,
- struct omap_dss_device *display,
struct drm_encoder *encoder)
{
struct drm_connector *connector = NULL;
struct omap_connector *omap_connector;
struct omap_dss_device *dssdev;
- DBG("%s", display->name);
+ DBG("%s", output->name);
omap_connector = kzalloc(sizeof(*omap_connector), GFP_KERNEL);
if (!omap_connector)
@@ -344,7 +350,7 @@ struct drm_connector *omap_connector_init(struct drm_device *dev,
connector->doublescan_allowed = 0;
drm_connector_init(dev, connector, &omap_connector_funcs,
- omap_connector_get_type(display));
+ omap_connector_get_type(output));
drm_connector_helper_add(connector, &omap_connector_helper_funcs);
/*
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.h b/drivers/gpu/drm/omapdrm/omap_connector.h
index 6b7d4d95e32b..608085219336 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.h
+++ b/drivers/gpu/drm/omapdrm/omap_connector.h
@@ -31,7 +31,6 @@ struct omap_dss_device;
struct drm_connector *omap_connector_init(struct drm_device *dev,
struct omap_dss_device *output,
- struct omap_dss_device *display,
struct drm_encoder *encoder);
bool omap_connector_get_hdmi_mode(struct drm_connector *connector);
void omap_connector_enable_hpd(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
index 1353aec73611..5a29bf01c0e8 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
@@ -666,7 +666,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
&omap_crtc_funcs, NULL);
if (ret < 0) {
dev_err(dev->dev, "%s(): could not init crtc for: %s\n",
- __func__, pipe->display->name);
+ __func__, pipe->output->name);
kfree(omap_crtc);
return ERR_PTR(ret);
}
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index 33f79c490011..f3a36f7b3c4d 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -140,9 +140,7 @@ static void omap_disconnect_pipelines(struct drm_device *ddev)
omapdss_device_disconnect(NULL, pipe->output);
omapdss_device_put(pipe->output);
- omapdss_device_put(pipe->display);
pipe->output = NULL;
- pipe->display = NULL;
}
memset(&priv->channels, 0, sizeof(priv->channels));
@@ -169,7 +167,6 @@ static int omap_connect_pipelines(struct drm_device *ddev)
pipe = &priv->pipes[priv->num_pipes++];
pipe->output = omapdss_device_get(output);
- pipe->display = omapdss_display_get(output);
if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) {
/* To balance the 'for_each_dss_output' loop */
@@ -207,6 +204,28 @@ static int omap_modeset_init_properties(struct drm_device *dev)
return 0;
}
+static int omap_display_id(struct omap_dss_device *output)
+{
+ struct device_node *node = NULL;
+
+ if (output->next) {
+ struct omap_dss_device *display;
+
+ display = omapdss_display_get(output);
+ node = display->dev->of_node;
+ omapdss_device_put(display);
+ } else {
+ struct drm_bridge *bridge = output->bridge;
+
+ while (bridge->next)
+ bridge = bridge->next;
+
+ node = bridge->of_node;
+ }
+
+ return node ? of_alias_get_id(node, "display") : -ENODEV;
+}
+
static int omap_modeset_init(struct drm_device *dev)
{
struct omap_drm_private *priv = dev->dev_private;
@@ -262,7 +281,10 @@ static int omap_modeset_init(struct drm_device *dev)
priv->planes[priv->num_planes++] = plane;
}
- /* Create the encoders and get the pipelines aliases. */
+ /*
+ * Create the encoders, attach the bridges and get the pipeline alias
+ * IDs.
+ */
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
int id;
@@ -271,7 +293,14 @@ static int omap_modeset_init(struct drm_device *dev)
if (!pipe->encoder)
return -ENOMEM;
- id = of_alias_get_id(pipe->display->dev->of_node, "display");
+ if (pipe->output->bridge) {
+ ret = drm_bridge_attach(pipe->encoder,
+ pipe->output->bridge, NULL);
+ if (ret < 0)
+ return ret;
+ }
+
+ id = omap_display_id(pipe->output);
pipe->alias_id = id >= 0 ? id : i;
}
@@ -297,16 +326,16 @@ static int omap_modeset_init(struct drm_device *dev)
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
struct drm_encoder *encoder = pipe->encoder;
- struct drm_connector *connector;
struct drm_crtc *crtc;
- connector = omap_connector_init(dev, pipe->output,
- pipe->display, encoder);
- if (!connector)
- return -ENOMEM;
+ if (!pipe->output->bridge) {
+ pipe->connector = omap_connector_init(dev, pipe->output,
+ encoder);
+ if (!pipe->connector)
+ return -ENOMEM;
- drm_connector_attach_encoder(connector, encoder);
- pipe->connector = connector;
+ drm_connector_attach_encoder(pipe->connector, encoder);
+ }
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
if (IS_ERR(crtc))
@@ -350,10 +379,12 @@ static int omap_modeset_init(struct drm_device *dev)
static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
- int i;
+ unsigned int i;
- for (i = 0; i < priv->num_pipes; i++)
- omap_connector_enable_hpd(priv->pipes[i].connector);
+ for (i = 0; i < priv->num_pipes; i++) {
+ if (priv->pipes[i].connector)
+ omap_connector_enable_hpd(priv->pipes[i].connector);
+ }
}
/*
@@ -362,10 +393,12 @@ static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
- int i;
+ unsigned int i;
- for (i = 0; i < priv->num_pipes; i++)
- omap_connector_disable_hpd(priv->pipes[i].connector);
+ for (i = 0; i < priv->num_pipes; i++) {
+ if (priv->pipes[i].connector)
+ omap_connector_disable_hpd(priv->pipes[i].connector);
+ }
}
/*
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index ebff86595167..3cca45cb25f3 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -49,7 +49,6 @@ struct omap_drm_pipeline {
struct drm_encoder *encoder;
struct drm_connector *connector;
struct omap_dss_device *output;
- struct omap_dss_device *display;
unsigned int alias_id;
};
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index b83a2ae64a03..9eb3db9ba23f 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -51,6 +51,34 @@ static const struct drm_encoder_funcs omap_encoder_funcs = {
.destroy = omap_encoder_destroy,
};
+static void omap_encoder_update_videomode_flags(struct videomode *vm,
+ u32 bus_flags)
+{
+ if (!(vm->flags & (DISPLAY_FLAGS_DE_LOW |
+ DISPLAY_FLAGS_DE_HIGH))) {
+ if (bus_flags & DRM_BUS_FLAG_DE_LOW)
+ vm->flags |= DISPLAY_FLAGS_DE_LOW;
+ else if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
+ vm->flags |= DISPLAY_FLAGS_DE_HIGH;
+ }
+
+ if (!(vm->flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE |
+ DISPLAY_FLAGS_PIXDATA_NEGEDGE))) {
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
+ vm->flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
+ else if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+ vm->flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+ }
+
+ if (!(vm->flags & (DISPLAY_FLAGS_SYNC_POSEDGE |
+ DISPLAY_FLAGS_SYNC_NEGEDGE))) {
+ if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE)
+ vm->flags |= DISPLAY_FLAGS_SYNC_POSEDGE;
+ else if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
+ vm->flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
+ }
+}
+
static void omap_encoder_hdmi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
@@ -87,7 +115,9 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+ struct omap_dss_device *output = omap_encoder->output;
struct omap_dss_device *dssdev;
+ struct drm_bridge *bridge;
struct videomode vm = { 0 };
drm_display_mode_to_videomode(adjusted_mode, &vm);
@@ -101,44 +131,29 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
*
* A better solution is to use DRM's bus-flags through the whole driver.
*/
- for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) {
- unsigned long bus_flags = dssdev->bus_flags;
+ for (dssdev = output; dssdev; dssdev = dssdev->next)
+ omap_encoder_update_videomode_flags(&vm, dssdev->bus_flags);
- if (!(vm.flags & (DISPLAY_FLAGS_DE_LOW |
- DISPLAY_FLAGS_DE_HIGH))) {
- if (bus_flags & DRM_BUS_FLAG_DE_LOW)
- vm.flags |= DISPLAY_FLAGS_DE_LOW;
- else if (bus_flags & DRM_BUS_FLAG_DE_HIGH)
- vm.flags |= DISPLAY_FLAGS_DE_HIGH;
- }
+ for (bridge = output->bridge; bridge; bridge = bridge->next) {
+ u32 bus_flags;
- if (!(vm.flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE |
- DISPLAY_FLAGS_PIXDATA_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
- vm.flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
- vm.flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
- }
+ if (!bridge->timings)
+ continue;
- if (!(vm.flags & (DISPLAY_FLAGS_SYNC_POSEDGE |
- DISPLAY_FLAGS_SYNC_NEGEDGE))) {
- if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE)
- vm.flags |= DISPLAY_FLAGS_SYNC_POSEDGE;
- else if (bus_flags & DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
- vm.flags |= DISPLAY_FLAGS_SYNC_NEGEDGE;
- }
+ bus_flags = bridge->timings->input_bus_flags;
+ omap_encoder_update_videomode_flags(&vm, bus_flags);
}
/* Set timings for all devices in the display pipeline. */
- dss_mgr_set_timings(omap_encoder->output, &vm);
+ dss_mgr_set_timings(output, &vm);
- for (dssdev = omap_encoder->output; dssdev; dssdev = dssdev->next) {
+ for (dssdev = output; dssdev; dssdev = dssdev->next) {
if (dssdev->ops->set_timings)
dssdev->ops->set_timings(dssdev, adjusted_mode);
}
/* Set the HDMI mode and HDMI infoframe if applicable. */
- if (omap_encoder->output->type == OMAP_DISPLAY_TYPE_HDMI)
+ if (output->type == OMAP_DISPLAY_TYPE_HDMI)
omap_encoder_hdmi_mode_set(encoder, adjusted_mode);
}
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 46/50] drm/omap: Add support for drm_panel
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (44 preceding siblings ...)
2019-02-11 9:47 ` [PATCH v3 45/50] drm/omap: Add support for drm_bridge Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 47/50] drm/omap: Whitelist DT nodes to fixup with omapdss, prefix Laurent Pinchart
` (3 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Hook up drm_panel support in the omapdrm driver. The change is
relatively simply as the way has been paved by drm_bridge support
already. In addition to looking up, attaching to and detaching from the
panel, we only need to add panel support in the connector .get_modes()
handler, take connector bus flags (set by the panel) into account, and
enable/disable the panel in the encoder enable/disable operations
handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/base.c | 12 ++++---
drivers/gpu/drm/omapdrm/dss/omapdss.h | 1 +
drivers/gpu/drm/omapdrm/dss/output.c | 7 +++-
drivers/gpu/drm/omapdrm/omap_connector.c | 9 ++++++
drivers/gpu/drm/omapdrm/omap_drv.c | 15 ++++++++-
drivers/gpu/drm/omapdrm/omap_encoder.c | 41 ++++++++++++++++--------
6 files changed, 65 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 09c9f2971aa2..3c088cd2ceab 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -157,7 +157,8 @@ struct omap_dss_device *omapdss_device_next_output(struct omap_dss_device *from)
goto done;
}
- if (dssdev->id && (dssdev->next || dssdev->bridge))
+ if (dssdev->id &&
+ (dssdev->next || dssdev->bridge || dssdev->panel))
goto done;
}
@@ -192,10 +193,11 @@ int omapdss_device_connect(struct dss_device *dss,
if (!dst) {
/*
* The destination is NULL when the source is connected to a
- * bridge instead of a DSS device. Stop here, we will attach the
- * bridge later when we will have a DRM encoder.
+ * bridge or panel instead of a DSS device. Stop here, we will
+ * attach the bridge or panel later when we will have a DRM
+ * encoder.
*/
- return src && src->bridge ? 0 : -EINVAL;
+ return src && (src->bridge || src->panel) ? 0 : -EINVAL;
}
if (omapdss_device_is_connected(dst))
@@ -223,7 +225,7 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
dst ? dev_name(dst->dev) : "NULL");
if (!dst) {
- WARN_ON(!src->bridge);
+ WARN_ON(!src->bridge && !src->panel);
return;
}
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index f47e9b94288f..0c734d1f89e1 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -411,6 +411,7 @@ struct omap_dss_device {
struct dss_device *dss;
struct omap_dss_device *next;
struct drm_bridge *bridge;
+ struct drm_panel *panel;
struct list_head list;
diff --git a/drivers/gpu/drm/omapdrm/dss/output.c b/drivers/gpu/drm/omapdrm/dss/output.c
index 2a53025c2fde..10a9ee5cdc61 100644
--- a/drivers/gpu/drm/omapdrm/dss/output.c
+++ b/drivers/gpu/drm/omapdrm/dss/output.c
@@ -22,6 +22,8 @@
#include <linux/of.h>
#include <linux/of_graph.h>
+#include <drm/drm_panel.h>
+
#include "dss.h"
#include "omapdss.h"
@@ -37,6 +39,9 @@ int omapdss_device_init_output(struct omap_dss_device *out)
out->next = omapdss_find_device_by_node(remote_node);
out->bridge = of_drm_find_bridge(remote_node);
+ out->panel = of_drm_find_panel(remote_node);
+ if (IS_ERR(out->panel))
+ out->panel = NULL;
of_node_put(remote_node);
@@ -47,7 +52,7 @@ int omapdss_device_init_output(struct omap_dss_device *out)
return -EINVAL;
}
- return out->next || out->bridge ? 0 : -EPROBE_DEFER;
+ return out->next || out->bridge || out->panel ? 0 : -EPROBE_DEFER;
}
EXPORT_SYMBOL(omapdss_device_init_output);
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index f711a267e2b6..5967283934e1 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -17,6 +17,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
+#include <drm/drm_panel.h>
#include <drm/drm_probe_helper.h>
#include "omap_drv.h"
@@ -211,6 +212,7 @@ static int omap_connector_get_modes_edid(struct drm_connector *connector,
static int omap_connector_get_modes(struct drm_connector *connector)
{
+ struct omap_connector *omap_connector = to_omap_connector(connector);
struct omap_dss_device *dssdev;
DBG("%s", connector->name);
@@ -233,6 +235,13 @@ static int omap_connector_get_modes(struct drm_connector *connector)
if (dssdev)
return dssdev->ops->get_modes(dssdev, connector);
+ /*
+ * Otherwise if the display pipeline uses a drm_panel, we delegate the
+ * operation to the panel API.
+ */
+ if (omap_connector->output->panel)
+ return drm_panel_get_modes(omap_connector->output->panel);
+
/*
* We can't retrieve modes, which can happen for instance for a DVI or
* VGA output with the DDC bus unconnected. The KMS core will add the
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index f3a36f7b3c4d..1b9b6f5e48e1 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -23,6 +23,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_probe_helper.h>
+#include <drm/drm_panel.h>
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
@@ -137,6 +138,9 @@ static void omap_disconnect_pipelines(struct drm_device *ddev)
for (i = 0; i < priv->num_pipes; i++) {
struct omap_drm_pipeline *pipe = &priv->pipes[i];
+ if (pipe->output->panel)
+ drm_panel_detach(pipe->output->panel);
+
omapdss_device_disconnect(NULL, pipe->output);
omapdss_device_put(pipe->output);
@@ -214,13 +218,15 @@ static int omap_display_id(struct omap_dss_device *output)
display = omapdss_display_get(output);
node = display->dev->of_node;
omapdss_device_put(display);
- } else {
+ } else if (output->bridge) {
struct drm_bridge *bridge = output->bridge;
while (bridge->next)
bridge = bridge->next;
node = bridge->of_node;
+ } else if (output->panel) {
+ node = output->panel->dev->of_node;
}
return node ? of_alias_get_id(node, "display") : -ENODEV;
@@ -335,6 +341,13 @@ static int omap_modeset_init(struct drm_device *dev)
return -ENOMEM;
drm_connector_attach_encoder(pipe->connector, encoder);
+
+ if (pipe->output->panel) {
+ ret = drm_panel_attach(pipe->output->panel,
+ pipe->connector);
+ if (ret < 0)
+ return ret;
+ }
}
crtc = omap_crtc_init(dev, pipe, priv->planes[i]);
diff --git a/drivers/gpu/drm/omapdrm/omap_encoder.c b/drivers/gpu/drm/omapdrm/omap_encoder.c
index 9eb3db9ba23f..40512419642b 100644
--- a/drivers/gpu/drm/omapdrm/omap_encoder.c
+++ b/drivers/gpu/drm/omapdrm/omap_encoder.c
@@ -20,6 +20,7 @@
#include <drm/drm_crtc.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_edid.h>
+#include <drm/drm_panel.h>
#include "omap_drv.h"
@@ -79,22 +80,15 @@ static void omap_encoder_update_videomode_flags(struct videomode *vm,
}
}
-static void omap_encoder_hdmi_mode_set(struct drm_encoder *encoder,
+static void omap_encoder_hdmi_mode_set(struct drm_connector *connector,
+ struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->output;
- struct drm_connector *connector;
bool hdmi_mode;
- hdmi_mode = false;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->encoder == encoder) {
- hdmi_mode = omap_connector_get_hdmi_mode(connector);
- break;
- }
- }
+ hdmi_mode = omap_connector_get_hdmi_mode(connector);
if (dssdev->ops->hdmi.set_hdmi_mode)
dssdev->ops->hdmi.set_hdmi_mode(dssdev, hdmi_mode);
@@ -117,8 +111,16 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *output = omap_encoder->output;
struct omap_dss_device *dssdev;
+ struct drm_device *dev = encoder->dev;
+ struct drm_connector *connector;
struct drm_bridge *bridge;
struct videomode vm = { 0 };
+ u32 bus_flags;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (connector->encoder == encoder)
+ break;
+ }
drm_display_mode_to_videomode(adjusted_mode, &vm);
@@ -135,8 +137,6 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
omap_encoder_update_videomode_flags(&vm, dssdev->bus_flags);
for (bridge = output->bridge; bridge; bridge = bridge->next) {
- u32 bus_flags;
-
if (!bridge->timings)
continue;
@@ -144,6 +144,9 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
omap_encoder_update_videomode_flags(&vm, bus_flags);
}
+ bus_flags = connector->display_info.bus_flags;
+ omap_encoder_update_videomode_flags(&vm, bus_flags);
+
/* Set timings for all devices in the display pipeline. */
dss_mgr_set_timings(output, &vm);
@@ -154,7 +157,7 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
/* Set the HDMI mode and HDMI infoframe if applicable. */
if (output->type == OMAP_DISPLAY_TYPE_HDMI)
- omap_encoder_hdmi_mode_set(encoder, adjusted_mode);
+ omap_encoder_hdmi_mode_set(connector, encoder, adjusted_mode);
}
static void omap_encoder_disable(struct drm_encoder *encoder)
@@ -165,6 +168,12 @@ static void omap_encoder_disable(struct drm_encoder *encoder)
dev_dbg(dev->dev, "disable(%s)\n", dssdev->name);
+ /* Disable the panel if present. */
+ if (dssdev->panel) {
+ drm_panel_disable(dssdev->panel);
+ drm_panel_unprepare(dssdev->panel);
+ }
+
/*
* Disable the chain of external devices, starting at the one at the
* internal encoder's output.
@@ -214,6 +223,12 @@ static void omap_encoder_enable(struct drm_encoder *encoder)
* internal encoder's output.
*/
omapdss_device_enable(dssdev->next);
+
+ /* Enable the panel if present. */
+ if (dssdev->panel) {
+ drm_panel_prepare(dssdev->panel);
+ drm_panel_enable(dssdev->panel);
+ }
}
static int omap_encoder_atomic_check(struct drm_encoder *encoder,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 47/50] drm/omap: Whitelist DT nodes to fixup with omapdss, prefix
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (45 preceding siblings ...)
2019-02-11 9:47 ` [PATCH v3 46/50] drm/omap: Add support for drm_panel Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 48/50] drm/omap: Remove TFP410 and DVI connector drivers Laurent Pinchart
` (2 subsequent siblings)
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
The omapdss driver patches DT at runtime to prepend an "omapdss," prefix
to the compatible string of all encoders, panels and connectors. This
mechanism ensures they get bound to the omapdss-specific drivers instead
of generic drivers.
Now that we have drm_bridge support in omapdrm, we need to selectively
disable this mechanism. Add a whitelist of compatible strings to patch,
and fill it with all the devices we support. They will be removed one by
one once corresponding drm_bridge drivers become available and get
successfully tested with omapdrm.
The omapdss components load check code is updated accordingly to ignore
devices managed by external bridge drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/dss/base.c | 20 +++++++++++-------
.../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 21 ++++++++++++++++++-
2 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/base.c b/drivers/gpu/drm/omapdrm/dss/base.c
index 3c088cd2ceab..f8dad99013e8 100644
--- a/drivers/gpu/drm/omapdrm/dss/base.c
+++ b/drivers/gpu/drm/omapdrm/dss/base.c
@@ -303,6 +303,7 @@ struct omapdss_comp_node {
struct list_head list;
struct device_node *node;
bool dss_core_component;
+ const char *compat;
};
static bool omapdss_list_contains(const struct device_node *node)
@@ -320,13 +321,20 @@ static bool omapdss_list_contains(const struct device_node *node)
static void omapdss_walk_device(struct device *dev, struct device_node *node,
bool dss_core)
{
+ struct omapdss_comp_node *comp;
struct device_node *n;
- struct omapdss_comp_node *comp = devm_kzalloc(dev, sizeof(*comp),
- GFP_KERNEL);
+ const char *compat;
+ int ret;
+ ret = of_property_read_string(node, "compatible", &compat);
+ if (ret < 0)
+ return;
+
+ comp = devm_kzalloc(dev, sizeof(*comp), GFP_KERNEL);
if (comp) {
comp->node = node;
comp->dss_core_component = dss_core;
+ comp->compat = compat;
list_add(&comp->list, &omapdss_comp_list);
}
@@ -366,12 +374,8 @@ void omapdss_gather_components(struct device *dev)
omapdss_walk_device(dev, dev->of_node, true);
- for_each_available_child_of_node(dev->of_node, child) {
- if (!of_find_property(child, "compatible", NULL))
- continue;
-
+ for_each_available_child_of_node(dev->of_node, child)
omapdss_walk_device(dev, child, true);
- }
}
EXPORT_SYMBOL(omapdss_gather_components);
@@ -379,6 +383,8 @@ static bool omapdss_component_is_loaded(struct omapdss_comp_node *comp)
{
if (comp->dss_core_component)
return true;
+ if (!strstarts(comp->compat, "omapdss,"))
+ return true;
if (omapdss_device_is_registered(comp->node))
return true;
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 3bfb95d230e0..309b7b453e98 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -184,6 +184,25 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
{},
};
+static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
+ { .compatible = "composite-video-connector" },
+ { .compatible = "dvi-connector" },
+ { .compatible = "hdmi-connector" },
+ { .compatible = "lgphilips,lb035q02" },
+ { .compatible = "nec,nl8048hl11" },
+ { .compatible = "panel-dpi" },
+ { .compatible = "panel-dsi-cm" },
+ { .compatible = "sharp,ls037v7dw01" },
+ { .compatible = "sony,acx565akm" },
+ { .compatible = "svideo-connector" },
+ { .compatible = "ti,opa362" },
+ { .compatible = "ti,tfp410" },
+ { .compatible = "ti,tpd12s015" },
+ { .compatible = "toppoly,td028ttec1" },
+ { .compatible = "tpo,td028ttec1" },
+ { .compatible = "tpo,td043mtea1" },
+};
+
static int __init omapdss_boot_init(void)
{
struct device_node *dss, *child;
@@ -210,7 +229,7 @@ static int __init omapdss_boot_init(void)
n = list_first_entry(&dss_conv_list, struct dss_conv_node,
list);
- if (!n->root)
+ if (of_match_node(omapdss_of_fixups_whitelist, n->node))
omapdss_omapify_node(n->node);
list_del(&n->list);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 48/50] drm/omap: Remove TFP410 and DVI connector drivers
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (46 preceding siblings ...)
2019-02-11 9:47 ` [PATCH v3 47/50] drm/omap: Whitelist DT nodes to fixup with omapdss, prefix Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 49/50] drm/omap: Remove panel-dpi driver Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 50/50] drm: Turn bus flags macros into an enum Laurent Pinchart
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Those components are supported by the drm_bridge infrastructure, remove
the omapdrm-specific driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/displays/Kconfig | 11 -
drivers/gpu/drm/omapdrm/displays/Makefile | 2 -
.../gpu/drm/omapdrm/displays/connector-dvi.c | 293 ------------------
.../gpu/drm/omapdrm/displays/encoder-tfp410.c | 140 ---------
.../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 2 -
5 files changed, 448 deletions(-)
delete mode 100644 drivers/gpu/drm/omapdrm/displays/connector-dvi.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig
index a349cb61961e..38d066ac966e 100644
--- a/drivers/gpu/drm/omapdrm/displays/Kconfig
+++ b/drivers/gpu/drm/omapdrm/displays/Kconfig
@@ -6,23 +6,12 @@ config DRM_OMAP_ENCODER_OPA362
Driver for OPA362 external analog TV amplifier controlled
through a GPIO.
-config DRM_OMAP_ENCODER_TFP410
- tristate "TFP410 DPI to DVI Encoder"
- help
- Driver for TFP410 DPI to DVI encoder.
-
config DRM_OMAP_ENCODER_TPD12S015
tristate "TPD12S015 HDMI ESD protection and level shifter"
help
Driver for TPD12S015, which offers HDMI ESD protection and level
shifting.
-config DRM_OMAP_CONNECTOR_DVI
- tristate "DVI Connector"
- depends on I2C
- help
- Driver for a generic DVI connector.
-
config DRM_OMAP_CONNECTOR_HDMI
tristate "HDMI Connector"
help
diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile
index d99659e1381b..da1d5321ef50 100644
--- a/drivers/gpu/drm/omapdrm/displays/Makefile
+++ b/drivers/gpu/drm/omapdrm/displays/Makefile
@@ -1,8 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_OMAP_ENCODER_OPA362) += encoder-opa362.o
-obj-$(CONFIG_DRM_OMAP_ENCODER_TFP410) += encoder-tfp410.o
obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o
-obj-$(CONFIG_DRM_OMAP_CONNECTOR_DVI) += connector-dvi.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
obj-$(CONFIG_DRM_OMAP_PANEL_DPI) += panel-dpi.o
diff --git a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c b/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
deleted file mode 100644
index fa3a69bf8a04..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/connector-dvi.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Generic DVI Connector driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <drm/drm_edid.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct i2c_adapter *i2c_adapter;
-
- struct gpio_desc *hpd_gpio;
-
- void (*hpd_cb)(void *cb_data, enum drm_connector_status status);
- void *hpd_cb_data;
- bool hpd_enabled;
- /* mutex for hpd fields above */
- struct mutex hpd_lock;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int dvic_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void dvic_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static int dvic_ddc_read(struct i2c_adapter *adapter,
- unsigned char *buf, u16 count, u8 offset)
-{
- int r, retries;
-
- for (retries = 3; retries > 0; retries--) {
- struct i2c_msg msgs[] = {
- {
- .addr = DDC_ADDR,
- .flags = 0,
- .len = 1,
- .buf = &offset,
- }, {
- .addr = DDC_ADDR,
- .flags = I2C_M_RD,
- .len = count,
- .buf = buf,
- }
- };
-
- r = i2c_transfer(adapter, msgs, 2);
- if (r == 2)
- return 0;
-
- if (r != -EAGAIN)
- break;
- }
-
- return r < 0 ? r : -EIO;
-}
-
-static int dvic_read_edid(struct omap_dss_device *dssdev,
- u8 *edid, int len)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r, l, bytes_read;
-
- l = min(EDID_LENGTH, len);
- r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
- if (r)
- return r;
-
- bytes_read = l;
-
- /* if there are extensions, read second block */
- if (len > EDID_LENGTH && edid[0x7e] > 0) {
- l = min(EDID_LENGTH, len - EDID_LENGTH);
-
- r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
- l, EDID_LENGTH);
- if (r)
- return r;
-
- bytes_read += l;
- }
-
- return bytes_read;
-}
-
-static bool dvic_detect(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- unsigned char out;
- int r;
-
- if (ddata->hpd_gpio)
- return gpiod_get_value_cansleep(ddata->hpd_gpio);
-
- if (!ddata->i2c_adapter)
- return true;
-
- r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
-
- return r == 0;
-}
-
-static void dvic_register_hpd_cb(struct omap_dss_device *dssdev,
- void (*cb)(void *cb_data,
- enum drm_connector_status status),
- void *cb_data)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_cb = cb;
- ddata->hpd_cb_data = cb_data;
- mutex_unlock(&ddata->hpd_lock);
-}
-
-static void dvic_unregister_hpd_cb(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- mutex_lock(&ddata->hpd_lock);
- ddata->hpd_cb = NULL;
- ddata->hpd_cb_data = NULL;
- mutex_unlock(&ddata->hpd_lock);
-}
-
-static const struct omap_dss_device_ops dvic_ops = {
- .connect = dvic_connect,
- .disconnect = dvic_disconnect,
-
- .read_edid = dvic_read_edid,
- .detect = dvic_detect,
-
- .register_hpd_cb = dvic_register_hpd_cb,
- .unregister_hpd_cb = dvic_unregister_hpd_cb,
-};
-
-static irqreturn_t dvic_hpd_isr(int irq, void *data)
-{
- struct panel_drv_data *ddata = data;
-
- mutex_lock(&ddata->hpd_lock);
- if (ddata->hpd_enabled && ddata->hpd_cb) {
- enum drm_connector_status status;
-
- if (dvic_detect(&ddata->dssdev))
- status = connector_status_connected;
- else
- status = connector_status_disconnected;
-
- ddata->hpd_cb(ddata->hpd_cb_data, status);
- }
- mutex_unlock(&ddata->hpd_lock);
-
- return IRQ_HANDLED;
-}
-
-static int dvic_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct device_node *node = pdev->dev.of_node;
- struct device_node *adapter_node;
- struct i2c_adapter *adapter;
- struct gpio_desc *gpio;
- int r;
-
- gpio = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
- if (IS_ERR(gpio)) {
- dev_err(&pdev->dev, "failed to parse HPD gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->hpd_gpio = gpio;
-
- mutex_init(&ddata->hpd_lock);
-
- if (ddata->hpd_gpio) {
- r = devm_request_threaded_irq(&pdev->dev,
- gpiod_to_irq(ddata->hpd_gpio), NULL, dvic_hpd_isr,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- "DVI HPD", ddata);
- if (r)
- return r;
- }
-
- adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
- if (adapter_node) {
- adapter = of_get_i2c_adapter_by_node(adapter_node);
- of_node_put(adapter_node);
- if (adapter == NULL) {
- dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
- return -EPROBE_DEFER;
- }
-
- ddata->i2c_adapter = adapter;
- }
-
- return 0;
-}
-
-static int dvic_probe(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ddata);
-
- r = dvic_probe_of(pdev);
- if (r)
- return r;
-
- dssdev = &ddata->dssdev;
- dssdev->ops = &dvic_ops;
- dssdev->dev = &pdev->dev;
- dssdev->type = OMAP_DISPLAY_TYPE_DVI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_ports = BIT(0);
-
- if (ddata->hpd_gpio)
- dssdev->ops_flags |= OMAP_DSS_DEVICE_OP_DETECT
- | OMAP_DSS_DEVICE_OP_HPD;
- if (ddata->i2c_adapter)
- dssdev->ops_flags |= OMAP_DSS_DEVICE_OP_DETECT
- | OMAP_DSS_DEVICE_OP_EDID;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int __exit dvic_remove(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
-
- omapdss_device_unregister(&ddata->dssdev);
-
- i2c_put_adapter(ddata->i2c_adapter);
-
- mutex_destroy(&ddata->hpd_lock);
-
- return 0;
-}
-
-static const struct of_device_id dvic_of_match[] = {
- { .compatible = "omapdss,dvi-connector", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, dvic_of_match);
-
-static struct platform_driver dvi_connector_driver = {
- .probe = dvic_probe,
- .remove = __exit_p(dvic_remove),
- .driver = {
- .name = "connector-dvi",
- .of_match_table = dvic_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_platform_driver(dvi_connector_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic DVI Connector driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c b/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
deleted file mode 100644
index de954182c4bb..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/encoder-tfp410.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * TFP410 DPI-to-DVI encoder driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct gpio_desc *pd_gpio;
-};
-
-#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
-
-static int tfp410_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return omapdss_device_connect(dst->dss, dst, dst->next);
-}
-
-static void tfp410_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- omapdss_device_disconnect(dst, dst->next);
-}
-
-static void tfp410_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->pd_gpio)
- gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-}
-
-static void tfp410_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->pd_gpio)
- gpiod_set_value_cansleep(ddata->pd_gpio, 0);
-}
-
-static const struct omap_dss_device_ops tfp410_ops = {
- .connect = tfp410_connect,
- .disconnect = tfp410_disconnect,
- .enable = tfp410_enable,
- .disable = tfp410_disable,
-};
-
-static int tfp410_probe(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- struct gpio_desc *gpio;
-
- ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ddata);
-
- /* Powerdown GPIO */
- gpio = devm_gpiod_get_optional(&pdev->dev, "powerdown", GPIOD_OUT_HIGH);
- if (IS_ERR(gpio)) {
- dev_err(&pdev->dev, "failed to parse powerdown gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->pd_gpio = gpio;
-
- dssdev = &ddata->dssdev;
- dssdev->ops = &tfp410_ops;
- dssdev->dev = &pdev->dev;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->owner = THIS_MODULE;
- dssdev->of_ports = BIT(1) | BIT(0);
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
- dssdev->next = omapdss_of_find_connected_device(pdev->dev.of_node, 1);
- if (IS_ERR(dssdev->next)) {
- if (PTR_ERR(dssdev->next) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "failed to find video sink\n");
- return PTR_ERR(dssdev->next);
- }
-
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int __exit tfp410_remove(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- if (dssdev->next)
- omapdss_device_put(dssdev->next);
- omapdss_device_unregister(&ddata->dssdev);
-
- tfp410_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id tfp410_of_match[] = {
- { .compatible = "omapdss,ti,tfp410", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, tfp410_of_match);
-
-static struct platform_driver tfp410_driver = {
- .probe = tfp410_probe,
- .remove = __exit_p(tfp410_remove),
- .driver = {
- .name = "tfp410",
- .of_match_table = tfp410_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_platform_driver(tfp410_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 309b7b453e98..dfeaea639920 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -186,7 +186,6 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
{ .compatible = "composite-video-connector" },
- { .compatible = "dvi-connector" },
{ .compatible = "hdmi-connector" },
{ .compatible = "lgphilips,lb035q02" },
{ .compatible = "nec,nl8048hl11" },
@@ -196,7 +195,6 @@ static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
{ .compatible = "sony,acx565akm" },
{ .compatible = "svideo-connector" },
{ .compatible = "ti,opa362" },
- { .compatible = "ti,tfp410" },
{ .compatible = "ti,tpd12s015" },
{ .compatible = "toppoly,td028ttec1" },
{ .compatible = "tpo,td028ttec1" },
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 49/50] drm/omap: Remove panel-dpi driver
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (47 preceding siblings ...)
2019-02-11 9:47 ` [PATCH v3 48/50] drm/omap: Remove TFP410 and DVI connector drivers Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
2019-02-11 9:47 ` [PATCH v3 50/50] drm: Turn bus flags macros into an enum Laurent Pinchart
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
Panels are now supported through the drm_panel infrastructure, remove
the omapdrm-specific driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/gpu/drm/omapdrm/displays/Kconfig | 6 -
drivers/gpu/drm/omapdrm/displays/Makefile | 1 -
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 199 ------------------
.../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 1 -
4 files changed, 207 deletions(-)
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-dpi.c
diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig
index 38d066ac966e..7b0bcb494b5c 100644
--- a/drivers/gpu/drm/omapdrm/displays/Kconfig
+++ b/drivers/gpu/drm/omapdrm/displays/Kconfig
@@ -22,12 +22,6 @@ config DRM_OMAP_CONNECTOR_ANALOG_TV
help
Driver for a generic analog TV connector.
-config DRM_OMAP_PANEL_DPI
- tristate "Generic DPI panel"
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Driver for generic DPI panels.
-
config DRM_OMAP_PANEL_DSI_CM
tristate "Generic DSI Command Mode Panel"
depends on BACKLIGHT_CLASS_DEVICE
diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile
index da1d5321ef50..1db34d4fed64 100644
--- a/drivers/gpu/drm/omapdrm/displays/Makefile
+++ b/drivers/gpu/drm/omapdrm/displays/Makefile
@@ -3,7 +3,6 @@ obj-$(CONFIG_DRM_OMAP_ENCODER_OPA362) += encoder-opa362.o
obj-$(CONFIG_DRM_OMAP_ENCODER_TPD12S015) += encoder-tpd12s015.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_HDMI) += connector-hdmi.o
obj-$(CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
-obj-$(CONFIG_DRM_OMAP_PANEL_DPI) += panel-dpi.o
obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
deleted file mode 100644
index 389ae2821222..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Generic MIPI DPI Panel Driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/regulator/consumer.h>
-#include <linux/backlight.h>
-
-#include <video/of_display_timing.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct videomode vm;
-
- struct backlight_device *backlight;
-
- struct gpio_desc *enable_gpio;
- struct regulator *vcc_supply;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int panel_dpi_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void panel_dpi_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void panel_dpi_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r;
-
- r = regulator_enable(ddata->vcc_supply);
- if (r)
- return;
-
- gpiod_set_value_cansleep(ddata->enable_gpio, 1);
- backlight_enable(ddata->backlight);
-}
-
-static void panel_dpi_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- backlight_disable(ddata->backlight);
-
- gpiod_set_value_cansleep(ddata->enable_gpio, 0);
- regulator_disable(ddata->vcc_supply);
-}
-
-static int panel_dpi_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops panel_dpi_ops = {
- .connect = panel_dpi_connect,
- .disconnect = panel_dpi_disconnect,
-
- .enable = panel_dpi_enable,
- .disable = panel_dpi_disable,
-
- .get_modes = panel_dpi_get_modes,
-};
-
-static int panel_dpi_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct device_node *node = pdev->dev.of_node;
- int r;
- struct display_timing timing;
- struct gpio_desc *gpio;
-
- gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
-
- ddata->enable_gpio = gpio;
-
- /*
- * Many different panels are supported by this driver and there are
- * probably very different needs for their reset pins in regards to
- * timing and order relative to the enable gpio. So for now it's just
- * ensured that the reset line isn't active.
- */
- gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
-
- ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
- if (IS_ERR(ddata->vcc_supply))
- return PTR_ERR(ddata->vcc_supply);
-
- ddata->backlight = devm_of_find_backlight(&pdev->dev);
-
- if (IS_ERR(ddata->backlight))
- return PTR_ERR(ddata->backlight);
-
- r = of_get_display_timing(node, "panel-timing", &timing);
- if (r) {
- dev_err(&pdev->dev, "failed to get video timing\n");
- return r;
- }
-
- videomode_from_timing(&timing, &ddata->vm);
-
- return 0;
-}
-
-static int panel_dpi_probe(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ddata);
-
- r = panel_dpi_probe_of(pdev);
- if (r)
- return r;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &pdev->dev;
- dssdev->ops = &panel_dpi_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_ports = BIT(0);
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- drm_bus_flags_from_videomode(&ddata->vm, &dssdev->bus_flags);
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int __exit panel_dpi_remove(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- omapdss_device_unregister(dssdev);
-
- if (omapdss_device_is_enabled(dssdev))
- panel_dpi_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id panel_dpi_of_match[] = {
- { .compatible = "omapdss,panel-dpi", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
-
-static struct platform_driver panel_dpi_driver = {
- .probe = panel_dpi_probe,
- .remove = __exit_p(panel_dpi_remove),
- .driver = {
- .name = "panel-dpi",
- .of_match_table = panel_dpi_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_platform_driver(panel_dpi_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index dfeaea639920..2b41c75ce988 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -189,7 +189,6 @@ static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
{ .compatible = "hdmi-connector" },
{ .compatible = "lgphilips,lb035q02" },
{ .compatible = "nec,nl8048hl11" },
- { .compatible = "panel-dpi" },
{ .compatible = "panel-dsi-cm" },
{ .compatible = "sharp,ls037v7dw01" },
{ .compatible = "sony,acx565akm" },
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread* [PATCH v3 50/50] drm: Turn bus flags macros into an enum
2019-02-11 9:46 [PATCH v3 00/50] omapdrm: drm_bridge and drm_panel support Laurent Pinchart
` (48 preceding siblings ...)
2019-02-11 9:47 ` [PATCH v3 49/50] drm/omap: Remove panel-dpi driver Laurent Pinchart
@ 2019-02-11 9:47 ` Laurent Pinchart
49 siblings, 0 replies; 59+ messages in thread
From: Laurent Pinchart @ 2019-02-11 9:47 UTC (permalink / raw)
To: dri-devel; +Cc: Tomi Valkeinen
This allows nicer kerneldoc with an easy way to reference the enum and
the values.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
include/drm/drm_connector.h | 108 +++++++++++++++++++++---------------
1 file changed, 64 insertions(+), 44 deletions(-)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index fa6b8af611b3..8dbdadfa002e 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -253,6 +253,68 @@ enum drm_panel_orientation {
DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};
+/**
+ * enum drm_bus_flags - bus_flags info for &drm_display_info
+ *
+ * This enum defines signal polarities and clock edge information for signals on
+ * a bus as bitmask flags.
+ *
+ * The clock edge information is conveyed by two sets of symbols,
+ * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is
+ * used to describe a bus from the point of view of the transmitter, the
+ * \*_DRIVE_\* flags should be used. When used from the point of view of the
+ * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and
+ * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and
+ * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE
+ * respectively. This simplifies code as signals are usually sampled on the
+ * opposite edge of the driving edge. Transmitters and receivers may however
+ * need to take other signal timings into account to convert between driving
+ * and sample edges.
+ *
+ * @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low
+ * @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high
+ * @DRM_BUS_FLAG_PIXDATA_POSEDGE: Legacy value, do not use
+ * @DRM_BUS_FLAG_PIXDATA_NEGEDGE: Legacy value, do not use
+ * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of
+ * the pixel clock
+ * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of
+ * the pixel clock
+ * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE: Data is sampled on the rising edge of
+ * the pixel clock
+ * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE: Data is sampled on the falling edge of
+ * the pixel clock
+ * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus
+ * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus
+ * @DRM_BUS_FLAG_SYNC_POSEDGE: Legacy value, do not use
+ * @DRM_BUS_FLAG_SYNC_NEGEDGE: Legacy value, do not use
+ * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising
+ * edge of the pixel clock
+ * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling
+ * edge of the pixel clock
+ * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE: Sync signals are sampled on the rising
+ * edge of the pixel clock
+ * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE: Sync signals are sampled on the falling
+ * edge of the pixel clock
+ */
+enum drm_bus_flags {
+ DRM_BUS_FLAG_DE_LOW = BIT(0),
+ DRM_BUS_FLAG_DE_HIGH = BIT(1),
+ DRM_BUS_FLAG_PIXDATA_POSEDGE = BIT(2),
+ DRM_BUS_FLAG_PIXDATA_NEGEDGE = BIT(3),
+ DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+ DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4),
+ DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5),
+ DRM_BUS_FLAG_SYNC_POSEDGE = BIT(6),
+ DRM_BUS_FLAG_SYNC_NEGEDGE = BIT(7),
+ DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = DRM_BUS_FLAG_SYNC_POSEDGE,
+ DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE,
+ DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE,
+ DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_POSEDGE,
+};
+
/**
* struct drm_display_info - runtime data about the connected sink
*
@@ -328,52 +390,10 @@ struct drm_display_info {
*/
unsigned int num_bus_formats;
-#define DRM_BUS_FLAG_DE_LOW (1<<0)
-#define DRM_BUS_FLAG_DE_HIGH (1<<1)
-
-/*
- * Don't use those two flags directly, use the DRM_BUS_FLAG_PIXDATA_DRIVE_*
- * and DRM_BUS_FLAG_PIXDATA_SAMPLE_* variants to qualify the flags explicitly.
- * The DRM_BUS_FLAG_PIXDATA_SAMPLE_* flags are defined as the opposite of the
- * DRM_BUS_FLAG_PIXDATA_DRIVE_* flags to make code simpler, as signals are
- * usually to be sampled on the opposite edge of the driving edge.
- */
-#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
-#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
-
-/* Drive data on rising edge */
-#define DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE DRM_BUS_FLAG_PIXDATA_POSEDGE
-/* Drive data on falling edge */
-#define DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE DRM_BUS_FLAG_PIXDATA_NEGEDGE
-/* Sample data on rising edge */
-#define DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE DRM_BUS_FLAG_PIXDATA_NEGEDGE
-/* Sample data on falling edge */
-#define DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE DRM_BUS_FLAG_PIXDATA_POSEDGE
-
-/* data is transmitted MSB to LSB on the bus */
-#define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4)
-/* data is transmitted LSB to MSB on the bus */
-#define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5)
-
-/*
- * Similarly to the DRM_BUS_FLAG_PIXDATA_* flags, don't use these two flags
- * directly, use one of the DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_* instead.
- */
-#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<6)
-#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<7)
-
-/* Drive sync on rising edge */
-#define DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE DRM_BUS_FLAG_SYNC_POSEDGE
-/* Drive sync on falling edge */
-#define DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE DRM_BUS_FLAG_SYNC_NEGEDGE
-/* Sample sync on rising edge */
-#define DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE DRM_BUS_FLAG_SYNC_NEGEDGE
-/* Sample sync on falling edge */
-#define DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE DRM_BUS_FLAG_SYNC_POSEDGE
-
/**
* @bus_flags: Additional information (like pixel signal polarity) for
- * the pixel data on the bus, using DRM_BUS_FLAGS\_ defines.
+ * the pixel data on the bus, using &enum drm_bus_flags values
+ * DRM_BUS_FLAGS\_.
*/
u32 bus_flags;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 59+ messages in thread