[PATCH AUTOSEL 5.1 008/186] drm/pl111: Initialize clock spinlock early

[PATCH AUTOSEL 5.1 008/186] drm/pl111: Initialize clock spinlock early

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 3e01ae2612bdd7975c74ec7123d7f8f5e6eed795 ]

The following warning is seen on systems with broken clock divider.

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-09698-g1fb3b52 #1
Hardware name: ARM Integrator/CP (Device Tree)
[<c0011be8>] (unwind_backtrace) from [<c000ebb8>] (show_stack+0x10/0x18)
[<c000ebb8>] (show_stack) from [<c07d3fd0>] (dump_stack+0x18/0x24)
[<c07d3fd0>] (dump_stack) from [<c0060d48>] (register_lock_class+0x674/0x6f8)
[<c0060d48>] (register_lock_class) from [<c005de2c>]
	(__lock_acquire+0x68/0x2128)
[<c005de2c>] (__lock_acquire) from [<c0060408>] (lock_acquire+0x110/0x21c)
[<c0060408>] (lock_acquire) from [<c07f755c>] (_raw_spin_lock+0x34/0x48)
[<c07f755c>] (_raw_spin_lock) from [<c0536c8c>]
	(pl111_display_enable+0xf8/0x5fc)
[<c0536c8c>] (pl111_display_enable) from [<c0502f54>]
	(drm_atomic_helper_commit_modeset_enables+0x1ec/0x244)

Since commit eedd6033b4c8 ("drm/pl111: Support variants with broken clock
divider"), the spinlock is not initialized if the clock divider is broken.
Initialize it earlier to fix the problem.

Fixes: eedd6033b4c8 ("drm/pl111: Support variants with broken clock divider")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1557758781-23586-1-git-send-email-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/pl111/pl111_display.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 754f6b25f2652..6d9f78612deeb 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -531,14 +531,15 @@ pl111_init_clock_divider(struct drm_device *drm)
 		dev_err(drm->dev, "CLCD: unable to get clcdclk.\n");
 		return PTR_ERR(parent);
 	}
+
+	spin_lock_init(&priv->tim2_lock);
+
 	/* If the clock divider is broken, use the parent directly */
 	if (priv->variant->broken_clockdivider) {
 		priv->clk = parent;
 		return 0;
 	}
 	parent_name = __clk_get_name(parent);
-
-	spin_lock_init(&priv->tim2_lock);
 	div->init = &init;
 
 	ret = devm_clk_hw_register(drm->dev, div);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.1 028/186] drm/nouveau/disp/dp: respect sink limits when selecting failsafe link configuration

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 13d03e9daf70dab032c03dc172e75bb98ad899c4 ]

Where possible, we want the failsafe link configuration (one which won't
hang the OR during modeset because of not enough bandwidth for the mode)
to also be supported by the sink.

This prevents "link rate unsupported by sink" messages when link training
fails.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
index 5f301e632599b..818d21bd28d31 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
@@ -365,8 +365,15 @@ nvkm_dp_train(struct nvkm_dp *dp, u32 dataKBps)
 	 * and it's better to have a failed modeset than that.
 	 */
 	for (cfg = nvkm_dp_rates; cfg->rate; cfg++) {
-		if (cfg->nr <= outp_nr && cfg->nr <= outp_bw)
-			failsafe = cfg;
+		if (cfg->nr <= outp_nr && cfg->nr <= outp_bw) {
+			/* Try to respect sink limits too when selecting
+			 * lowest link configuration.
+			 */
+			if (!failsafe ||
+			    (cfg->nr <= sink_nr && cfg->bw <= sink_bw))
+				failsafe = cfg;
+		}
+
 		if (failsafe && cfg[1].rate < dataKBps)
 			break;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.1 007/186] drm/msm: correct attempted NULL pointer dereference in debugfs

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit 90f94660e53189755676543954101de78c26253b ]

msm_gem_describe() would attempt to dereference a NULL pointer via the
address space pointer when no IOMMU is present. Correct this by adding
the appropriate check.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 575f0485508b ("drm/msm: Clean up and enhance the output of the 'gem' debugfs node")
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513234105.7531-2-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_gem.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c
index 18ca651ab942a..23de4d1b7b1ac 100644
--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -805,7 +805,8 @@ void msm_gem_describe(struct drm_gem_object *obj, struct seq_file *m)
 		seq_puts(m, "      vmas:");
 
 		list_for_each_entry(vma, &msm_obj->vmas, list)
-			seq_printf(m, " [%s: %08llx,%s,inuse=%d]", vma->aspace->name,
+			seq_printf(m, " [%s: %08llx,%s,inuse=%d]",
+				vma->aspace != NULL ? vma->aspace->name : NULL,
 				vma->iova, vma->mapped ? "mapped" : "unmapped",
 				vma->inuse);
 
-- 
2.20.1

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

[PATCH AUTOSEL 5.1 031/186] drm/nouveau/kms/gf119-gp10x: push HeadSetControlOutputResource() mthd when encoders change

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit a0b694d0af21c9993d1a39a75fd814bd48bf7eb4 ]

HW has error checks in place which check that pixel depth is explicitly
provided on DP, while HDMI has a "default" setting that we use.

In multi-display configurations with identical modelines, but different
protocols (HDMI + DP, in this case), it was possible for the DP head to
get swapped to the head which previously drove the HDMI output, without
updating HeadSetControlOutputResource(), triggering the error check and
hanging the core update.

Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/dispnv50/head.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/head.c b/drivers/gpu/drm/nouveau/dispnv50/head.c
index 2e7a0c347ddbe..8efb778a3b207 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/head.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/head.c
@@ -306,7 +306,7 @@ nv50_head_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state)
 			asyh->set.or = head->func->or != NULL;
 		}
 
-		if (asyh->state.mode_changed)
+		if (asyh->state.mode_changed || asyh->state.connectors_changed)
 			nv50_head_atomic_check_mode(head, asyh);
 
 		if (asyh->state.color_mgmt_changed ||
-- 
2.20.1

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[PATCH AUTOSEL 5.1 035/186] drm/nouveau/kms/gv100-: fix spurious window immediate interlocks

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit d2434e4d942c32cadcbdbcd32c58f35098f3b604 ]

Cursor position updates were accidentally causing us to attempt to interlock
window with window immediate, and without a matching window immediate update,
NVDisplay could hang forever in some circumstances.

Fixes suspend/resume on (at least) Quadro RTX4000 (TU104).

Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/dispnv50/disp.h     | 1 +
 drivers/gpu/drm/nouveau/dispnv50/wimmc37b.c | 1 +
 drivers/gpu/drm/nouveau/dispnv50/wndw.c     | 2 +-
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.h b/drivers/gpu/drm/nouveau/dispnv50/disp.h
index 2216c58620c2d..7c41b0599d1ac 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.h
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.h
@@ -41,6 +41,7 @@ struct nv50_disp_interlock {
 		NV50_DISP_INTERLOCK__SIZE
 	} type;
 	u32 data;
+	u32 wimm;
 };
 
 void corec37d_ntfy_init(struct nouveau_bo *, u32);
diff --git a/drivers/gpu/drm/nouveau/dispnv50/wimmc37b.c b/drivers/gpu/drm/nouveau/dispnv50/wimmc37b.c
index 9103b8494279c..f7dbd965e4e72 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/wimmc37b.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/wimmc37b.c
@@ -75,6 +75,7 @@ wimmc37b_init_(const struct nv50_wimm_func *func, struct nouveau_drm *drm,
 		return ret;
 	}
 
+	wndw->interlock.wimm = wndw->interlock.data;
 	wndw->immd = func;
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/dispnv50/wndw.c b/drivers/gpu/drm/nouveau/dispnv50/wndw.c
index b95181027b317..471a39a077e55 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/wndw.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/wndw.c
@@ -149,7 +149,7 @@ nv50_wndw_flush_set(struct nv50_wndw *wndw, u32 *interlock,
 	if (asyw->set.point) {
 		if (asyw->set.point = false, asyw->set.mask)
 			interlock[wndw->interlock.type] |= wndw->interlock.data;
-		interlock[NV50_DISP_INTERLOCK_WIMM] |= wndw->interlock.data;
+		interlock[NV50_DISP_INTERLOCK_WIMM] |= wndw->interlock.wimm;
 
 		wndw->immd->point(wndw, asyw);
 		wndw->immd->update(wndw, interlock);
-- 
2.20.1

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[PATCH AUTOSEL 5.1 032/186] drm/nouveau: fix duplication of nv50_head_atom struct

[Sasha Levin]

From: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>

[ Upstream commit c4a52d669690423ee3c99d8eda1e69cd0821fcad ]

nv50_head_atomic_duplicate_state() makes a copy of nv50_head_atom
struct. This patch adds copying of struct member named "or", which
previously was left uninitialized in the duplicated structure.

Due to this bug, incorrect nhsync and nvsync values were sometimes used.
In my particular case, that lead to a mismatch between the output
resolution of the graphics device (GeForce GT 630 OEM) and the reported
input signal resolution on the display. xrandr reported 1680x1050, but
the display reported 1280x1024. As a result of this mismatch, the output
on the display looked like it was cropped (only part of the output was
actually visible on the display).

git bisect pointed to commit 2ca7fb5c1cc6 ("drm/nouveau/kms/nv50: handle
SetControlOutputResource from head"), which added the member "or" to
nv50_head_atom structure, but forgot to copy it in
nv50_head_atomic_duplicate_state().

Fixes: 2ca7fb5c1cc6 ("drm/nouveau/kms/nv50: handle SetControlOutputResource from head")
Signed-off-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/dispnv50/head.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/head.c b/drivers/gpu/drm/nouveau/dispnv50/head.c
index 8efb778a3b207..06ee23823a689 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/head.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/head.c
@@ -413,6 +413,7 @@ nv50_head_atomic_duplicate_state(struct drm_crtc *crtc)
 	asyh->ovly = armh->ovly;
 	asyh->dither = armh->dither;
 	asyh->procamp = armh->procamp;
+	asyh->or = armh->or;
 	asyh->dp = armh->dp;
 	asyh->clr.mask = 0;
 	asyh->set.mask = 0;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.1 033/186] drm/bridge: adv7511: Fix low refresh rate selection

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@thinci.com>

[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]

The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().

Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index ec2ca71e13232..c532e9c9e491e 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -748,11 +748,11 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 			vsync_polarity = 1;
 	}
 
-	if (mode->vrefresh <= 24000)
+	if (drm_mode_vrefresh(mode) <= 24)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
-	else if (mode->vrefresh <= 25000)
+	else if (drm_mode_vrefresh(mode) <= 25)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
-	else if (mode->vrefresh <= 30000)
+	else if (drm_mode_vrefresh(mode) <= 30)
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
 	else
 		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.1 065/186] fbcon: Don't reset logo_shown when logo is currently shown

[Sasha Levin]

From: Andreas Schwab <schwab@linux-m68k.org>

[ Upstream commit 3c5a1b111373e669c8220803464c3a508a87e254 ]

When the logo is currently drawn on a virtual console, and the console
loglevel is reduced to quiet, logo_shown must be left alone, so that it
the scrolling region on that virtual console is properly reset.

Fixes: 10993504d647 ("fbcon: Silence fbcon logo on 'quiet' boots")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Marko Myllynen <myllynen@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbcon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index cd059a801662e..786f9aab55df6 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1069,7 +1069,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	cap = info->flags;
 
-	if (console_loglevel <= CONSOLE_LOGLEVEL_QUIET)
+	if (logo_shown < 0 && console_loglevel <= CONSOLE_LOGLEVEL_QUIET)
 		logo_shown = FBCON_LOGO_DONTSHOW;
 
 	if (vc != svc || logo_shown == FBCON_LOGO_DONTSHOW ||
-- 
2.20.1