From: Boris Brezillon <boris.brezillon@collabora.com>
To: dri-devel@lists.freedesktop.org
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Andrey Smirnov <andrew.smirnov@gmail.com>,
Jonas Karlman <jonas@kwiboo.se>,
Seung-Woo Kim <sw0312.kim@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Thierry Reding <thierry.reding@gmail.com>,
Chris Healy <Chris.Healy@zii.aero>,
Boris Brezillon <boris.brezillon@collabora.com>,
kernel@collabora.com, Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v2 06/21] drm/exynos: Implement bridge_funcs instead of encoder_helper_funcs
Date: Mon, 26 Aug 2019 17:26:34 +0200 [thread overview]
Message-ID: <20190826152649.13820-7-boris.brezillon@collabora.com> (raw)
In-Reply-To: <20190826152649.13820-1-boris.brezillon@collabora.com>
Those hooks are called exactly at the same time except the bridge
funcs have pre_enable()/post_disable() hooks which allows us to get
rid of the hack resetting encoder->bridge.next (was needed to control
the encoder/bridge enable/disable sequence).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
---
Changes in v2:
* New patch (replacement for "drm/exynos: Get rid of exynos_dsi->out_bridge")
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 55 ++++++++++++++++---------
1 file changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index c555cecfe1f5..4f713b0ac244 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1374,40 +1374,48 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
}
}
-static void exynos_dsi_enable(struct drm_encoder *encoder)
+static void exynos_dsi_pre_enable(struct drm_bridge *bridge)
{
+ struct drm_encoder *encoder = bridge_to_encoder(bridge);
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
- int ret;
if (dsi->state & DSIM_STATE_ENABLED)
return;
pm_runtime_get_sync(dsi->dev);
- dsi->state |= DSIM_STATE_ENABLED;
if (dsi->panel) {
+ int ret;
+
ret = drm_panel_prepare(dsi->panel);
WARN_ON(ret && ret != -ENOSYS);
- } else {
- drm_bridge_pre_enable(dsi->out_bridge);
}
+}
+
+static void exynos_dsi_enable(struct drm_bridge *bridge)
+{
+ struct drm_encoder *encoder = bridge_to_encoder(bridge);
+ struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+
+ if (dsi->state & DSIM_STATE_ENABLED)
+ return;
exynos_dsi_set_display_mode(dsi);
exynos_dsi_set_display_enable(dsi, true);
if (dsi->panel) {
+ int ret;
+
ret = drm_panel_enable(dsi->panel);
WARN_ON(ret && ret != -ENOSYS);
- } else {
- drm_bridge_enable(dsi->out_bridge);
}
- dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
- return;
+ dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE | DSIM_STATE_ENABLED;
}
-static void exynos_dsi_disable(struct drm_encoder *encoder)
+static void exynos_dsi_disable(struct drm_bridge *bridge)
{
+ struct drm_encoder *encoder = bridge_to_encoder(bridge);
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
if (!(dsi->state & DSIM_STATE_ENABLED))
@@ -1415,11 +1423,18 @@ static void exynos_dsi_disable(struct drm_encoder *encoder)
dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
- drm_panel_disable(dsi->panel);
- drm_bridge_disable(dsi->out_bridge);
exynos_dsi_set_display_enable(dsi, false);
drm_panel_unprepare(dsi->panel);
- drm_bridge_post_disable(dsi->out_bridge);
+}
+
+static void exynos_dsi_post_disable(struct drm_bridge *bridge)
+{
+ struct drm_encoder *encoder = bridge_to_encoder(bridge);
+ struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+
+ if (!(dsi->state & DSIM_STATE_ENABLED))
+ return;
+
dsi->state &= ~DSIM_STATE_ENABLED;
pm_runtime_put_sync(dsi->dev);
}
@@ -1489,9 +1504,11 @@ static int exynos_dsi_create_connector(struct drm_encoder *encoder)
return 0;
}
-static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = {
+static const struct drm_bridge_funcs exynos_dsi_bridge_funcs = {
+ .pre_enable = exynos_dsi_pre_enable,
.enable = exynos_dsi_enable,
.disable = exynos_dsi_disable,
+ .post_disable = exynos_dsi_post_disable,
};
static const struct drm_encoder_funcs exynos_dsi_encoder_funcs = {
@@ -1512,7 +1529,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
if (out_bridge) {
drm_bridge_attach(encoder, out_bridge, NULL);
dsi->out_bridge = out_bridge;
- encoder->bridge.next = NULL;
} else {
int ret = exynos_dsi_create_connector(encoder);
@@ -1569,7 +1585,8 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
if (dsi->panel) {
mutex_lock(&drm->mode_config.mutex);
- exynos_dsi_disable(&dsi->encoder);
+ exynos_dsi_disable(&dsi->encoder.bridge);
+ exynos_dsi_post_disable(&dsi->encoder.bridge);
drm_panel_detach(dsi->panel);
dsi->panel = NULL;
dsi->connector.status = connector_status_disconnected;
@@ -1674,11 +1691,10 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
struct drm_bridge *in_bridge;
int ret;
+ encoder->bridge.funcs = &exynos_dsi_bridge_funcs;
drm_encoder_init(drm_dev, encoder, &exynos_dsi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
- drm_encoder_helper_add(encoder, &exynos_dsi_encoder_helper_funcs);
-
ret = exynos_drm_set_possible_crtcs(encoder, EXYNOS_DISPLAY_TYPE_LCD);
if (ret < 0)
return ret;
@@ -1698,7 +1714,8 @@ static void exynos_dsi_unbind(struct device *dev, struct device *master,
struct drm_encoder *encoder = dev_get_drvdata(dev);
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
- exynos_dsi_disable(encoder);
+ exynos_dsi_disable(&encoder->bridge);
+ exynos_dsi_post_disable(&encoder->bridge);
mipi_dsi_host_unregister(&dsi->dsi_host);
}
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-08-26 15:26 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 15:26 [PATCH v2 00/21] drm: Add support for bus-format negotiation Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 01/21] drm: Stop including drm_bridge.h from drm_crtc.h Boris Brezillon
2019-08-28 20:27 ` Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 02/21] drm: Add a dummy bridge object to drm_encoder Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 03/21] drm/vc4: Implement bridge_funcs instead of encoder_helper_funcs Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 04/21] drm/exynos: Fix potential unbalanced calls to pm_runtime_put Boris Brezillon
2019-10-11 13:31 ` Boris Brezillon
2019-10-11 13:54 ` Andrzej Hajda
2019-10-11 14:20 ` Boris Brezillon
2019-10-12 7:15 ` Sam Ravnborg
2019-10-22 9:14 ` Boris Brezillon
2019-10-22 17:23 ` Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 05/21] drm/exynos: Don't reset bridge->next Boris Brezillon
2019-08-26 15:26 ` Boris Brezillon [this message]
2019-08-26 15:26 ` [PATCH v2 07/21] drm/bridge: Rename bridge helpers targeting a bridge chain Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 08/21] drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder Boris Brezillon
2019-08-28 15:22 ` Sean Paul
2019-08-28 15:25 ` Boris Brezillon
2019-08-28 15:30 ` Sean Paul
2019-08-28 20:27 ` Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 09/21] drm/bridge: Introduce drm_bridge_chain_get_next_bridge() Boris Brezillon
2019-08-27 7:19 ` Neil Armstrong
2019-08-26 15:26 ` [PATCH v2 10/21] drm/bridge: Make the bridge chain a double-linked list Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 11/21] drm/bridge: Add the drm_for_each_bridge_in_chain() helper Boris Brezillon
2019-08-27 7:26 ` Neil Armstrong
2019-08-26 15:26 ` [PATCH v2 12/21] drm/bridge: Add a drm_bridge_state object Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 13/21] drm/bridge: Patch atomic hooks to take a drm_bridge_state Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 14/21] drm/bridge: Add an ->atomic_check() hook Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 15/21] drm/bridge: Add the drm_bridge_chain_get_prev_bridge() helper Boris Brezillon
2019-08-27 7:26 ` Neil Armstrong
2019-08-26 15:26 ` [PATCH v2 16/21] drm/bridge: Add the necessary bits to support bus format negotiation Boris Brezillon
2019-08-27 8:18 ` Neil Armstrong
2019-08-26 15:26 ` [PATCH v2 17/21] drm/imx: pd: Use bus format/flags provided by the bridge when available Boris Brezillon
2019-08-27 8:15 ` Philipp Zabel
2019-08-27 8:43 ` Boris Brezillon
2019-08-27 9:23 ` Philipp Zabel
2019-08-27 9:57 ` Boris Brezillon
2019-08-27 12:51 ` Philipp Zabel
2019-08-27 13:20 ` Boris Brezillon
2019-08-27 13:49 ` Philipp Zabel
2019-08-26 15:26 ` [PATCH v2 18/21] drm/bridge: lvds-encoder: Implement basic bus format negotiation Boris Brezillon
2019-08-26 16:15 ` Jernej Škrabec
2019-08-26 18:17 ` Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 19/21] drm/bridge: panel: Propage bus format/flags Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 20/21] drm/panel: simple: Add support for Toshiba LTA089AC29000 panel Boris Brezillon
2019-08-26 15:26 ` [PATCH v2 21/21] ARM: dts: imx: imx51-zii-rdu1: Fix the display pipeline definition Boris Brezillon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826152649.13820-7-boris.brezillon@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=Chris.Healy@zii.aero \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=andrew.smirnov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=kyungmin.park@samsung.com \
--cc=narmstrong@baylibre.com \
--cc=nikita.yoush@cogentembedded.com \
--cc=sam@ravnborg.org \
--cc=sw0312.kim@samsung.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox