Re: [PATCH] drm/panel: panel-simple: validate panel description

[Sam Ravnborg <sam@ravnborg.org>]

Hi Laurent.

On Sun, Jul 12, 2020 at 01:56:16AM +0300, Laurent Pinchart wrote:
> Hi Sam,
> 
> (CC'ing Daniel)
> 
> Thank you for the patch.
> 
> On Sat, Jul 11, 2020 at 11:47:26AM +0200, Sam Ravnborg wrote:
> > Warn is we detect a panel with missing descriptions.
> 
> s/is/if/
> 
> > This is inpsired by a similar patch by Laurent that introduced checks
> > for LVDS panels - this extends the checks to the reminaing type of
> 
> s/reminaing type/remaining types/
> 
> > connectors.
> > 
> > This is known to fail for some of the existing panels but added
> > despite this as we need help from people using the panels to
> > add the missing info.
> > The checks are not complete but will catch the most common mistakes.
> > The checks at the same time serves as documentation for the minimum
> > required description for a panel.
> > 
> > Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > ---
> > 
> > This is my attempt on the validation described in the previous mail.
> > The assignment of default connector_type will then be a follow-up patch
> > to this.
> > 
> > 	Sam
> > 
> >  drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++--
> >  1 file changed, 30 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 2aff93accad5..025a7ccdfcb3 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -549,8 +549,12 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
> >  			panel_simple_parse_panel_timing_node(dev, panel, &dt);
> >  	}
> >  
> > -	if (desc->connector_type == DRM_MODE_CONNECTOR_LVDS) {
> > -		/* Catch common mistakes for LVDS panels. */
> > +	/* Catch common mistakes for panels. */
> > +	switch (desc->connector_type) {
> > +	case 0:
> > +		WARN(desc->connector_type == 0, "specify missing connector_type\n");
> > +		break;
> > +	case DRM_MODE_CONNECTOR_LVDS:
> >  		WARN_ON(desc->bus_flags &
> >  			~(DRM_BUS_FLAG_DE_LOW |
> >  			  DRM_BUS_FLAG_DE_HIGH |
> > @@ -564,6 +568,30 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
> >  		WARN_ON((desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ||
> >  			 desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) &&
> >  			desc->bpc != 8);
> > +		break;
> > +	case DRM_MODE_CONNECTOR_eDP:
> > +		WARN_ON(desc->bus_format == 0);
> > +		WARN_ON(desc->bpc != 6 && desc->bpc != 8);
> > +		break;
> > +	case DRM_MODE_CONNECTOR_DSI:
> > +		WARN_ON(desc->bpc != 6 && desc->bpc != 8);
> > +		break;
> > +	case DRM_MODE_CONNECTOR_DPI:
> > +		WARN_ON(desc->bus_flags &
> > +			~(DRM_BUS_FLAG_DE_LOW |
> > +			  DRM_BUS_FLAG_DE_HIGH |
> > +			  DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
> > +			  DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
> > +			  DRM_BUS_FLAG_DATA_MSB_TO_LSB |
> > +			  DRM_BUS_FLAG_DATA_LSB_TO_MSB |
> > +			  DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE |
> > +			  DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE));
> > +		WARN_ON(desc->bus_format == 0);
> > +		WARN_ON(desc->bpc != 6 && desc->bpc != 8);
> > +		break;
> > +	default:
> > +		WARN(true, "panel has unknown connector_type: %d\n", desc->connector_type);
> > +		break;
> >  	}
> 
> The checks look sane to me. For LVDS we've added the WARN_ON after
> checking all LVDS panels [1], so the warning will only get displayed for
> new panel drivers. For other types of panel, this will cause lots of
> WARN_ON to trigger. On one hand it gets the issues noticed, which should
> help fixing them, but on the other hand it will also scare lots of users
> and developers. I'm not sure if we should downgrade that to a dev_warn()
> for some time until we get at least the majority of the issues fixed.
> Daniel, any opinion ?

We should be noisy, but not too noisy.
dev_warn() is fine, maybe only dev_info()?

Unless I get other feedback I will convert to dev_info() in the
next version of the patch.
Fixing all panels before we add the checks, is not feasible.
Access to datasheet is not easy/possible for many panels.

	Sam


> 
> [1] Actually not quite, I've just sent "[PATCH] drm: panel: simple: Fix
> bpc for LG LB070WV8 panel" to fix one bpc issue.
> 
> >  	drm_panel_init(&panel->base, dev, &panel_simple_funcs,
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel