* [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-03-31 18:07 Yunus Bas
2021-03-31 18:07 ` [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
0 siblings, 1 reply; 4+ messages in thread
From: Yunus Bas @ 2021-03-31 18:07 UTC (permalink / raw)
To: dri-devel, thierry.reding, sam; +Cc: airlied
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
Changes in v2:
- Splitted dt-bindings to separate patch
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+ .clock = 25175,
+ .hdisplay = 640,
+ .hsync_start = 640,
+ .hsync_end = 640 + 16,
+ .htotal = 640 + 16 + 30 + 114,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 3,
+ .vtotal = 480 + 10 + 3 + 35,
+ .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+ .modes = &edt_etmv570g2dhu_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
+ }, {
+ .compatible = "edt,etmv570g2dhu",
+ .data = &edt_etmv570g2dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
--
2.30.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-03-31 18:07 [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
@ 2021-03-31 18:07 ` Yunus Bas
2021-06-28 8:27 ` Yunus Bas
0 siblings, 1 reply; 4+ messages in thread
From: Yunus Bas @ 2021-03-31 18:07 UTC (permalink / raw)
To: dri-devel, thierry.reding, sam; +Cc: airlied
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
Changes in v2:
- Splitted dt-bindings to separate patch
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 283c17a75376..70c25f6e642b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = {
.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
};
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+ .clock = 6520,
+ .hdisplay = 320,
+ .hsync_start = 320 + 20,
+ .hsync_end = 320 + 20 + 68,
+ .htotal = 320 + 20 + 68,
+ .vdisplay = 240,
+ .vsync_start = 240 + 4,
+ .vsync_end = 240 + 4 + 18,
+ .vtotal = 240 + 4 + 18,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+ .modes = &edt_etm0350g0dh6_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 70,
+ .height = 53,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm043080dh6gp_mode = {
.clock = 10870,
.hdisplay = 480,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et035012dm6",
.data = &edt_et035012dm6,
+ }, {
+ .compatible = "edt,etm0350g0dh6",
+ .data = &edt_etm0350g0dh6,
}, {
.compatible = "edt,etm043080dh6gp",
.data = &edt_etm043080dh6gp,
--
2.30.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-03-31 18:07 ` [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
@ 2021-06-28 8:27 ` Yunus Bas
0 siblings, 0 replies; 4+ messages in thread
From: Yunus Bas @ 2021-06-28 8:27 UTC (permalink / raw)
To: dri-devel@lists.freedesktop.org, airlied@linux.ie,
sam@ravnborg.org, thierry.reding@gmail.com
Hi. This patch has been waiting in the list for quite some time now.
Can someone review this patch?
Same goes for the following:
https://lore.kernel.org/dri-devel/20210331180757.463479-1-y.bas@phytec.de/
The corresponding dt-bindings are already acked by Rob Herring:
https://lore.kernel.org/linux-devicetree/20210409142652.GA3599944@robh.at.kernel.org/
https://lore.kernel.org/linux-devicetree/20210409142626.GA3599344@robh.at.kernel.org/
Thanks in advance.
Regards,
Yunus Bas
--
Mit freundlichen Grüßen
Yunus Bas
-Software Engineer-
PHYTEC Messtechnik GmbH
Robert-Koch-Str. 39
55129 Mainz
Germany
Tel.: +49 (0)6131 9221- 466
Web: www.phytec.de
Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber |
Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE
149059855
This E-Mail may contain confidential or privileged information. If you
are not the intended recipient (or have received this E-Mail in error)
please notify the sender immediately and destroy this E-Mail. Any
unauthorized copying, disclosure or distribution of the material in
this E-Mail is strictly forbidden.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-04-07 8:48 Yunus Bas
2021-04-07 8:48 ` [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
0 siblings, 1 reply; 4+ messages in thread
From: Yunus Bas @ 2021-04-07 8:48 UTC (permalink / raw)
To: thierry.reding, sam, dri-devel; +Cc: airlied, robh+dt
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+ .clock = 25175,
+ .hdisplay = 640,
+ .hsync_start = 640,
+ .hsync_end = 640 + 16,
+ .htotal = 640 + 16 + 30 + 114,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 3,
+ .vtotal = 480 + 10 + 3 + 35,
+ .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+ .modes = &edt_etmv570g2dhu_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
+ }, {
+ .compatible = "edt,etmv570g2dhu",
+ .data = &edt_etmv570g2dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
--
2.30.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-04-07 8:48 [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
@ 2021-04-07 8:48 ` Yunus Bas
0 siblings, 0 replies; 4+ messages in thread
From: Yunus Bas @ 2021-04-07 8:48 UTC (permalink / raw)
To: thierry.reding, sam, dri-devel; +Cc: airlied, robh+dt
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 283c17a75376..70c25f6e642b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = {
.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
};
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+ .clock = 6520,
+ .hdisplay = 320,
+ .hsync_start = 320 + 20,
+ .hsync_end = 320 + 20 + 68,
+ .htotal = 320 + 20 + 68,
+ .vdisplay = 240,
+ .vsync_start = 240 + 4,
+ .vsync_end = 240 + 4 + 18,
+ .vtotal = 240 + 4 + 18,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+ .modes = &edt_etm0350g0dh6_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 70,
+ .height = 53,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm043080dh6gp_mode = {
.clock = 10870,
.hdisplay = 480,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et035012dm6",
.data = &edt_et035012dm6,
+ }, {
+ .compatible = "edt,etm0350g0dh6",
+ .data = &edt_etm0350g0dh6,
}, {
.compatible = "edt,etm043080dh6gp",
.data = &edt_etm043080dh6gp,
--
2.30.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-28 8:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-03-31 18:07 [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-03-31 18:07 ` [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
2021-06-28 8:27 ` Yunus Bas
-- strict thread matches above, loose matches on Subject: below --
2021-04-07 8:48 [PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-04-07 8:48 ` [PATCH v2 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox