[PATCH 5.10 015/243] drm/dp_mst: Do not set proposed vcpi directly

[PATCH 5.10 015/243] drm/dp_mst: Do not set proposed vcpi directly

[Greg Kroah-Hartman]

From: Wayne Lin <Wayne.Lin@amd.com>

commit 35d3e8cb35e75450f87f87e3d314e2d418b6954b upstream.

[Why]
When we receive CSN message to notify one port is disconnected, we will
implicitly set its corresponding num_slots to 0. Later on, we will
eventually call drm_dp_update_payload_part1() to arrange down streams.

In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[]
to do the update. Not specific to a target sink only. For example, if we
light up 2 monitors, Monitor_A and Monitor_B, and then we unplug
Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try
to update payload for Monitor_A, we'll also implicitly clean payload for
Monitor_B at the same time. And finally, when we try to call
drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do
nothing at this time since payload for Monitor_B has been cleaned up
previously.

For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload
ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail
and this polling will last for 3 seconds.

Therefore, guess the best way is we don't set the proposed_vcpi[]
diretly. Let user of these herlper functions to set the proposed_vcpi
directly.

[How]
1. Revert commit 7617e9621bf2 ("drm/dp_mst: clear time slots for ports
invalid")
2. Tackle the issue in previous commit by skipping those trasient
proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by
user later on.

Changes since v1:
* Change debug macro to use drm_dbg_kms() instead
* Amend the commit message to add Fixed & Cc tags

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Fixes: 7617e9621bf2 ("drm/dp_mst: clear time slots for ports invalid")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616035501.3776-2-Wayne.Lin@amd.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c |   36 +++++++++-------------------------
 1 file changed, 10 insertions(+), 26 deletions(-)

--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2499,7 +2499,7 @@ drm_dp_mst_handle_conn_stat(struct drm_d
 {
 	struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
 	struct drm_dp_mst_port *port;
-	int old_ddps, old_input, ret, i;
+	int old_ddps, ret;
 	u8 new_pdt;
 	bool new_mcs;
 	bool dowork = false, create_connector = false;
@@ -2531,7 +2531,6 @@ drm_dp_mst_handle_conn_stat(struct drm_d
 	}
 
 	old_ddps = port->ddps;
-	old_input = port->input;
 	port->input = conn_stat->input_port;
 	port->ldps = conn_stat->legacy_device_plug_status;
 	port->ddps = conn_stat->displayport_device_plug_status;
@@ -2554,28 +2553,6 @@ drm_dp_mst_handle_conn_stat(struct drm_d
 		dowork = false;
 	}
 
-	if (!old_input && old_ddps != port->ddps && !port->ddps) {
-		for (i = 0; i < mgr->max_payloads; i++) {
-			struct drm_dp_vcpi *vcpi = mgr->proposed_vcpis[i];
-			struct drm_dp_mst_port *port_validated;
-
-			if (!vcpi)
-				continue;
-
-			port_validated =
-				container_of(vcpi, struct drm_dp_mst_port, vcpi);
-			port_validated =
-				drm_dp_mst_topology_get_port_validated(mgr, port_validated);
-			if (!port_validated) {
-				mutex_lock(&mgr->payload_lock);
-				vcpi->num_slots = 0;
-				mutex_unlock(&mgr->payload_lock);
-			} else {
-				drm_dp_mst_topology_put_port(port_validated);
-			}
-		}
-	}
-
 	if (port->connector)
 		drm_modeset_unlock(&mgr->base.lock);
 	else if (create_connector)
@@ -3406,8 +3383,15 @@ int drm_dp_update_payload_part1(struct d
 				port = drm_dp_mst_topology_get_port_validated(
 				    mgr, port);
 				if (!port) {
-					mutex_unlock(&mgr->payload_lock);
-					return -EINVAL;
+					if (vcpi->num_slots == payload->num_slots) {
+						cur_slots += vcpi->num_slots;
+						payload->start_slot = req_payload.start_slot;
+						continue;
+					} else {
+						drm_dbg_kms("Fail:set payload to invalid sink");
+						mutex_unlock(&mgr->payload_lock);
+						return -EINVAL;
+					}
 				}
 				put_port = true;
 			}

[PATCH 5.10 017/243] drm/dp_mst: Add missing drm parameters to recently added call to drm_dbg_kms()

[Greg Kroah-Hartman]

From: José Roberto de Souza <jose.souza@intel.com>

commit 24ff3dc18b99c4b912ab1746e803ddb3be5ced4c upstream.

Commit 3769e4c0af5b ("drm/dp_mst: Avoid to mess up payload table by
ports in stale topology") added to calls to drm_dbg_kms() but it
missed the first parameter, the drm device breaking the build.

Fixes: 3769e4c0af5b ("drm/dp_mst: Avoid to mess up payload table by ports in stale topology")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616194415.36926-1-jose.souza@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3385,7 +3385,9 @@ int drm_dp_update_payload_part1(struct d
 			mutex_unlock(&mgr->lock);
 
 			if (skip) {
-				drm_dbg_kms("Virtual channel %d is not in current topology\n", i);
+				drm_dbg_kms(mgr->dev,
+					    "Virtual channel %d is not in current topology\n",
+					    i);
 				continue;
 			}
 			/* Validated ports don't matter if we're releasing
@@ -3400,7 +3402,8 @@ int drm_dp_update_payload_part1(struct d
 						payload->start_slot = req_payload.start_slot;
 						continue;
 					} else {
-						drm_dbg_kms("Fail:set payload to invalid sink");
+						drm_dbg_kms(mgr->dev,
+							    "Fail:set payload to invalid sink");
 						mutex_unlock(&mgr->payload_lock);
 						return -EINVAL;
 					}

[PATCH 5.10 020/243] Revert "drm/ast: Remove reference to struct drm_device.pdev"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit fcb041ca5c7787b096aafc899e45f93583e66cbd which is
commit 0ecb51824e838372e01330752503ddf9c0430ef7 upstream.

Turns out this was incomplete, as it is missing a dependancy, so drop it
from the tree.

Link: https://lore.kernel.org/r/CAJn8CcHHKSo7GF29Z1ufXJJpMUzn6+fdvwiqe9=JvgpcfvnbHQ@mail.gmail.com
Reported-by: Xiaotian Feng <xtfeng@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/ast/ast_main.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -406,6 +406,7 @@ struct ast_private *ast_device_create(st
 		return ast;
 	dev = &ast->base;
 
+	dev->pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 
 	ast->regs = pcim_iomap(pdev, 1, 0);
@@ -447,8 +448,8 @@ struct ast_private *ast_device_create(st
 
 	/* map reserved buffer */
 	ast->dp501_fw_buf = NULL;
-	if (dev->vram_mm->vram_size < pci_resource_len(pdev, 0)) {
-		ast->dp501_fw_buf = pci_iomap_range(pdev, 0, dev->vram_mm->vram_size, 0);
+	if (dev->vram_mm->vram_size < pci_resource_len(dev->pdev, 0)) {
+		ast->dp501_fw_buf = pci_iomap_range(dev->pdev, 0, dev->vram_mm->vram_size, 0);
 		if (!ast->dp501_fw_buf)
 			drm_info(dev, "failed to map reserved buffer!\n");
 	}