dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH 09/13] drm/vc4: hdmi: Simplify the hotplug handling
Date: Tue,  2 Nov 2021 15:59:40 +0100	[thread overview]
Message-ID: <20211102145944.259181-10-maxime@cerno.tech> (raw)
In-Reply-To: <20211102145944.259181-1-maxime@cerno.tech>

Our detect callback has a bunch of operations to perform depending on
the current and last status of the connector, such a setting the CEC
physical address or enabling the scrambling again.

This is currently dealt with a bunch of if / else statetements that make
it fairly difficult to read and extend.

Let's move all that logic to a function of its own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 50 ++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 288c2bfbf88b..4f2f138f93e3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -177,11 +177,35 @@ static void vc4_hdmi_cec_update_clk_div(struct vc4_hdmi *vc4_hdmi) {}
 
 static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder);
 
+static void vc4_hdmi_handle_hotplug(struct vc4_hdmi *vc4_hdmi,
+				    enum drm_connector_status status)
+{
+	struct drm_connector *connector = &vc4_hdmi->connector;
+	struct edid *edid;
+
+	if (status == connector->status)
+		return;
+
+	if (status == connector_status_disconnected) {
+		cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
+		return;
+	}
+
+	edid = drm_get_edid(connector, vc4_hdmi->ddc);
+	if (!edid)
+		return;
+
+	cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap, edid);
+	kfree(edid);
+
+	vc4_hdmi_enable_scrambling(&vc4_hdmi->encoder.base.base);
+}
+
 static enum drm_connector_status
 vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
-	bool connected = false;
+	enum drm_connector_status status = connector_status_disconnected;
 
 	/*
 	 * NOTE: This function should really take vc4_hdmi->mutex, but
@@ -198,7 +222,7 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 
 	if (vc4_hdmi->hpd_gpio) {
 		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
-			connected = true;
+			status = connector_status_connected;
 	} else {
 		unsigned long flags;
 		u32 hotplug;
@@ -208,27 +232,13 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 		spin_unlock_irqrestore(&vc4_hdmi->hw_lock, flags);
 
 		if (hotplug & VC4_HDMI_HOTPLUG_CONNECTED)
-			connected = true;
+			status = connector_status_connected;
 	}
 
-	if (connected) {
-		if (connector->status != connector_status_connected) {
-			struct edid *edid = drm_get_edid(connector, vc4_hdmi->ddc);
-
-			if (edid) {
-				cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap, edid);
-				kfree(edid);
-			}
-		}
-
-		vc4_hdmi_enable_scrambling(&vc4_hdmi->encoder.base.base);
-		pm_runtime_put(&vc4_hdmi->pdev->dev);
-		return connector_status_connected;
-	}
-
-	cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
+	vc4_hdmi_handle_hotplug(vc4_hdmi, status);
 	pm_runtime_put(&vc4_hdmi->pdev->dev);
-	return connector_status_disconnected;
+
+	return status;
 }
 
 static void vc4_hdmi_connector_destroy(struct drm_connector *connector)
-- 
2.32.0


  parent reply	other threads:[~2021-11-02 15:00 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-02 14:59 [PATCH 00/13] drm: Add generic helpers for HDMI scrambling Maxime Ripard
2021-11-02 14:59 ` [PATCH 01/13] drm/connector: Add define for HDMI 1.4 Maximum Pixel Rate Maxime Ripard
2021-11-02 17:50   ` Alex Deucher
2021-11-03  9:08   ` Neil Armstrong
2021-11-03 11:02   ` Ville Syrjälä
2021-11-03 18:05     ` Ville Syrjälä
2021-11-04  8:48       ` Maxime Ripard
2021-11-04 15:41         ` Ville Syrjälä
2021-11-08 14:59           ` Maxime Ripard
2021-11-02 14:59 ` [PATCH 02/13] drm/connector: Add helper to check if a mode requires scrambling Maxime Ripard
2021-11-04 15:37   ` Ville Syrjälä
2021-11-05 18:02     ` Daniel Vetter
2021-11-05 18:14       ` Ville Syrjälä
2021-11-08 15:58         ` Maxime Ripard
2021-11-08 16:03           ` Daniel Vetter
2021-11-08 17:55           ` Ville Syrjälä
2021-11-15 12:15             ` Maxime Ripard
2021-11-17 10:01             ` Maxime Ripard
2021-11-02 14:59 ` [PATCH 03/13] drm/atomic: Add HDMI scrambler state helper Maxime Ripard
2021-11-02 14:59 ` [PATCH 04/13] drm/atomic: Add HDMI reset link helper Maxime Ripard
2021-11-02 14:59 ` [PATCH 05/13] drm/scdc: Document hotplug gotchas Maxime Ripard
2021-11-02 14:59 ` [PATCH 06/13] drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling Maxime Ripard
2021-11-02 14:59 ` [PATCH 07/13] drm/vc4: hdmi: Remove mutex in detect Maxime Ripard
2021-11-02 14:59 ` [PATCH 08/13] drm/vc4: hdmi: Remove HDMI flag from encoder Maxime Ripard
2021-11-02 14:59 ` Maxime Ripard [this message]
2021-11-02 14:59 ` [PATCH 10/13] drm/vc4: hdmi: Simplify the connector state retrieval Maxime Ripard
2021-11-02 14:59 ` [PATCH 11/13] drm/vc4: hdmi: Switch to detect_ctx Maxime Ripard
2021-11-02 14:59 ` [PATCH 12/13] drm/vc4: hdmi: Leverage new SCDC atomic_check Maxime Ripard
2021-11-02 14:59 ` [PATCH 13/13] drm/vc4: hdmi: Reset link on hotplug Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211102145944.259181-10-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox