dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH 12/13] drm/vc4: hdmi: Leverage new SCDC atomic_check
Date: Tue,  2 Nov 2021 15:59:43 +0100	[thread overview]
Message-ID: <20211102145944.259181-13-maxime@cerno.tech> (raw)
In-Reply-To: <20211102145944.259181-1-maxime@cerno.tech>

Now that we have a generic helper to fill the scrambling status, let's
use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 32 ++++++++++----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  6 ++++++
 2 files changed, 16 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 82878718e5fc..aa6700622797 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -297,6 +297,14 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector,
 	struct drm_connector_state *new_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	struct drm_crtc *crtc = new_state->crtc;
+	int ret;
+
+	ret = drm_atomic_helper_connector_hdmi_check(connector, state);
+	if (ret)
+		return ret;
+
+	if (new_state->hdmi_needs_scrambling != new_state->hdmi_needs_high_tmds_ratio)
+		return -EINVAL;
 
 	if (!crtc)
 		return 0;
@@ -586,37 +594,16 @@ static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
 	vc4_hdmi_set_hdr_infoframe(encoder);
 }
 
-static bool vc4_hdmi_supports_scrambling(struct drm_encoder *encoder)
-{
-	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	struct drm_display_info *display = &vc4_hdmi->connector.display_info;
-
-	lockdep_assert_held(&vc4_hdmi->mutex);
-
-	if (!display->is_hdmi)
-		return false;
-
-	if (!display->hdmi.scdc.supported ||
-	    !display->hdmi.scdc.scrambling.supported)
-		return false;
-
-	return true;
-}
-
 #define SCRAMBLING_POLLING_DELAY_MS	1000
 
 static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
 	unsigned long flags;
 
 	lockdep_assert_held(&vc4_hdmi->mutex);
 
-	if (!vc4_hdmi_supports_scrambling(encoder))
-		return;
-
-	if (!drm_mode_hdmi_requires_scrambling(mode))
+	if (!vc4_hdmi->scdc_needed)
 		return;
 
 	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
@@ -1228,6 +1215,7 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 
 	mutex_lock(&vc4_hdmi->mutex);
+	vc4_hdmi->scdc_needed = conn_state->hdmi_needs_scrambling;
 	memcpy(&vc4_hdmi->saved_adjusted_mode,
 	       &crtc_state->adjusted_mode,
 	       sizeof(vc4_hdmi->saved_adjusted_mode));
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 460112d68948..1aabc51ede03 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -206,6 +206,12 @@ struct vc4_hdmi {
 	 * the scrambler on? Protected by @mutex.
 	 */
 	bool scdc_enabled;
+
+	/**
+	 * @scdc_needed: Is the HDMI controller needs to have the
+	 * scrambling on? Protected by @mutex.
+	 */
+	bool scdc_needed;
 };
 
 static inline struct vc4_hdmi *
-- 
2.32.0


  parent reply	other threads:[~2021-11-02 15:00 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-02 14:59 [PATCH 00/13] drm: Add generic helpers for HDMI scrambling Maxime Ripard
2021-11-02 14:59 ` [PATCH 01/13] drm/connector: Add define for HDMI 1.4 Maximum Pixel Rate Maxime Ripard
2021-11-02 17:50   ` Alex Deucher
2021-11-03  9:08   ` Neil Armstrong
2021-11-03 11:02   ` Ville Syrjälä
2021-11-03 18:05     ` Ville Syrjälä
2021-11-04  8:48       ` Maxime Ripard
2021-11-04 15:41         ` Ville Syrjälä
2021-11-08 14:59           ` Maxime Ripard
2021-11-02 14:59 ` [PATCH 02/13] drm/connector: Add helper to check if a mode requires scrambling Maxime Ripard
2021-11-04 15:37   ` Ville Syrjälä
2021-11-05 18:02     ` Daniel Vetter
2021-11-05 18:14       ` Ville Syrjälä
2021-11-08 15:58         ` Maxime Ripard
2021-11-08 16:03           ` Daniel Vetter
2021-11-08 17:55           ` Ville Syrjälä
2021-11-15 12:15             ` Maxime Ripard
2021-11-17 10:01             ` Maxime Ripard
2021-11-02 14:59 ` [PATCH 03/13] drm/atomic: Add HDMI scrambler state helper Maxime Ripard
2021-11-02 14:59 ` [PATCH 04/13] drm/atomic: Add HDMI reset link helper Maxime Ripard
2021-11-02 14:59 ` [PATCH 05/13] drm/scdc: Document hotplug gotchas Maxime Ripard
2021-11-02 14:59 ` [PATCH 06/13] drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling Maxime Ripard
2021-11-02 14:59 ` [PATCH 07/13] drm/vc4: hdmi: Remove mutex in detect Maxime Ripard
2021-11-02 14:59 ` [PATCH 08/13] drm/vc4: hdmi: Remove HDMI flag from encoder Maxime Ripard
2021-11-02 14:59 ` [PATCH 09/13] drm/vc4: hdmi: Simplify the hotplug handling Maxime Ripard
2021-11-02 14:59 ` [PATCH 10/13] drm/vc4: hdmi: Simplify the connector state retrieval Maxime Ripard
2021-11-02 14:59 ` [PATCH 11/13] drm/vc4: hdmi: Switch to detect_ctx Maxime Ripard
2021-11-02 14:59 ` Maxime Ripard [this message]
2021-11-02 14:59 ` [PATCH 13/13] drm/vc4: hdmi: Reset link on hotplug Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211102145944.259181-13-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox