[PATCH v2 15/22] drm/rcar: plane: Remove redundant zpos initialisation

[Maxime Ripard <maxime@cerno.tech>]

The rcar-du KMS driver will call drm_plane_create_zpos_property() with an
init value depending on the plane type.

Since the initial value wasn't carried over in the state, the driver had
to set it again in rcar_du_plane_reset() and rcar_du_vsp_plane_reset().
However, the helpers have been adjusted to set it properly at reset, so
this is not needed anymore.

Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/rcar-du/rcar_du_plane.c | 1 -
 drivers/gpu/drm/rcar-du/rcar_du_vsp.c   | 1 -
 2 files changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
index 862197be1e01..9dda5e06457d 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -696,7 +696,6 @@ static void rcar_du_plane_reset(struct drm_plane *plane)
 	state->hwindex = -1;
 	state->source = RCAR_DU_PLANE_MEMORY;
 	state->colorkey = RCAR_DU_COLORKEY_NONE;
-	state->state.zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1;
 }
 
 static int rcar_du_plane_atomic_set_property(struct drm_plane *plane,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
index b7fc5b069cbc..719c60034952 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c
@@ -362,7 +362,6 @@ static void rcar_du_vsp_plane_reset(struct drm_plane *plane)
 		return;
 
 	__drm_atomic_helper_plane_reset(plane, &state->state);
-	state->state.zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : 1;
 }
 
 static const struct drm_plane_funcs rcar_du_vsp_plane_funcs = {
-- 
2.35.1