* [PATCH v2 2/5] drm: Add an HPD poll helper to reschedule the poll work
[not found] <20230720125418.236140-1-imre.deak@intel.com>
@ 2023-07-20 12:54 ` Imre Deak
2023-08-15 9:34 ` Dmitry Baryshkov
2023-07-20 12:54 ` [PATCH v2 3/5] drm/i915: Fix HPD polling, reenabling the output poll work as needed Imre Deak
1 sibling, 1 reply; 3+ messages in thread
From: Imre Deak @ 2023-07-20 12:54 UTC (permalink / raw)
To: intel-gfx; +Cc: Dmitry Baryshkov, dri-devel
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++++----------
include/drm/drm_probe_helper.h | 1 +
2 files changed, 47 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 2fb9bf901a2cc..3f479483d7d80 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -262,6 +262,26 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
}
#define DRM_OUTPUT_POLL_PERIOD (10*HZ)
+static void reschedule_output_poll_work(struct drm_device *dev)
+{
+ unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
+
+ if (dev->mode_config.delayed_event)
+ /*
+ * FIXME:
+ *
+ * Use short (1s) delay to handle the initial delayed event.
+ * This delay should not be needed, but Optimus/nouveau will
+ * fail in a mysterious way if the delayed event is handled as
+ * soon as possible like it is done in
+ * drm_helper_probe_single_connector_modes() in case the poll
+ * was enabled before.
+ */
+ delay = HZ;
+
+ schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+}
+
/**
* drm_kms_helper_poll_enable - re-enable output polling.
* @dev: drm_device
@@ -279,37 +299,41 @@ static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
*/
void drm_kms_helper_poll_enable(struct drm_device *dev)
{
- bool poll = false;
- unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
-
if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
dev->mode_config.poll_running)
return;
- poll = drm_kms_helper_enable_hpd(dev);
-
- if (dev->mode_config.delayed_event) {
- /*
- * FIXME:
- *
- * Use short (1s) delay to handle the initial delayed event.
- * This delay should not be needed, but Optimus/nouveau will
- * fail in a mysterious way if the delayed event is handled as
- * soon as possible like it is done in
- * drm_helper_probe_single_connector_modes() in case the poll
- * was enabled before.
- */
- poll = true;
- delay = HZ;
- }
-
- if (poll)
- schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+ if (drm_kms_helper_enable_hpd(dev) ||
+ dev->mode_config.delayed_event)
+ reschedule_output_poll_work(dev);
dev->mode_config.poll_running = true;
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
+/**
+ * drm_kms_helper_poll_reschedule - reschedule the output polling work
+ * @dev: drm_device
+ *
+ * This function reschedules the output polling work, after polling for a
+ * connector has been enabled.
+ *
+ * Drivers must call this helper after enabling polling for a connector by
+ * setting %DRM_CONNECTOR_POLL_CONNECT / %DRM_CONNECTOR_POLL_DISCONNECT flags
+ * in drm_connector::polled. Note that after disabling polling by clearing these
+ * flags for a connector will stop the output polling work automatically if
+ * the polling is disabled for all other connectors as well.
+ *
+ * The function can be called only after polling has been enabled by calling
+ * drm_kms_helper_poll_init() / drm_kms_helper_poll_enable().
+ */
+void drm_kms_helper_poll_reschedule(struct drm_device *dev)
+{
+ if (dev->mode_config.poll_running)
+ reschedule_output_poll_work(dev);
+}
+EXPORT_SYMBOL(drm_kms_helper_poll_reschedule);
+
static enum drm_connector_status
drm_helper_probe_detect_ctx(struct drm_connector *connector, bool force)
{
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 4977e0ab72dbb..fad3c4003b2b5 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -25,6 +25,7 @@ void drm_kms_helper_connector_hotplug_event(struct drm_connector *connector);
void drm_kms_helper_poll_disable(struct drm_device *dev);
void drm_kms_helper_poll_enable(struct drm_device *dev);
+void drm_kms_helper_poll_reschedule(struct drm_device *dev);
bool drm_kms_helper_is_poll_worker(void);
enum drm_mode_status drm_crtc_helper_mode_valid_fixed(struct drm_crtc *crtc,
--
2.37.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v2 3/5] drm/i915: Fix HPD polling, reenabling the output poll work as needed
[not found] <20230720125418.236140-1-imre.deak@intel.com>
2023-07-20 12:54 ` [PATCH v2 2/5] drm: Add an HPD poll helper to reschedule the poll work Imre Deak
@ 2023-07-20 12:54 ` Imre Deak
1 sibling, 0 replies; 3+ messages in thread
From: Imre Deak @ 2023-07-20 12:54 UTC (permalink / raw)
To: intel-gfx; +Cc: Dmitry Baryshkov, dri-devel
After the commit in the Fixes: line below, HPD polling stopped working
on i915, since after that change calling drm_kms_helper_poll_enable()
doesn't restart drm_mode_config::output_poll_work if the work was
stopped (no connectors needing polling) and enabling polling for a
connector (during runtime suspend or detecting an HPD IRQ storm).
After the above change calling drm_kms_helper_poll_enable() is a nop
after it's been called already and polling for some connectors was
disabled/re-enabled.
Fix this by calling drm_kms_helper_poll_reschedule() added in the
previous patch instead, which reschedules the work whenever expected.
Fixes: d33a54e3991d ("drm/probe_helper: sort out poll_running vs poll_enabled")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_hotplug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
index dd7eb9fc78610..d9f0ab1d953b9 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
@@ -212,7 +212,7 @@ intel_hpd_irq_storm_switch_to_polling(struct drm_i915_private *dev_priv)
/* Enable polling and queue hotplug re-enabling. */
if (hpd_disabled) {
- drm_kms_helper_poll_enable(&dev_priv->drm);
+ drm_kms_helper_poll_reschedule(&dev_priv->drm);
mod_delayed_work(dev_priv->unordered_wq,
&dev_priv->display.hotplug.reenable_work,
msecs_to_jiffies(HPD_STORM_REENABLE_DELAY));
@@ -676,7 +676,7 @@ static void i915_hpd_poll_init_work(struct work_struct *work)
drm_connector_list_iter_end(&conn_iter);
if (enabled)
- drm_kms_helper_poll_enable(&dev_priv->drm);
+ drm_kms_helper_poll_reschedule(&dev_priv->drm);
mutex_unlock(&dev_priv->drm.mode_config.mutex);
--
2.37.2
^ permalink raw reply related [flat|nested] 3+ messages in thread