dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH 07/12] drm/client: Use array notation for function arguments
Date: Thu,  4 Apr 2024 23:33:31 +0300	[thread overview]
Message-ID: <20240404203336.10454-8-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20240404203336.10454-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Use the array notation rather that the pointer notation for
function arguments. This makes it clear to the reader that
we are in fact dealing with an array rather than a single
pointer. Functionally the two are equivalent.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/drm_client_modeset.c | 42 ++++++++++++++--------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 384a9f8227a0..08fc896885dd 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -232,9 +232,9 @@ static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
 	return enable;
 }
 
-static void drm_client_connectors_enabled(struct drm_connector **connectors,
+static void drm_client_connectors_enabled(struct drm_connector *connectors[],
 					  unsigned int connector_count,
-					  bool *enabled)
+					  bool enabled[])
 {
 	bool any_enabled = false;
 	struct drm_connector *connector;
@@ -257,11 +257,11 @@ static void drm_client_connectors_enabled(struct drm_connector **connectors,
 }
 
 static bool drm_client_target_cloned(struct drm_device *dev,
-				     struct drm_connector **connectors,
+				     struct drm_connector *connectors[],
 				     unsigned int connector_count,
-				     const struct drm_display_mode **modes,
-				     struct drm_client_offset *offsets,
-				     bool *enabled, int width, int height)
+				     const struct drm_display_mode *modes[],
+				     struct drm_client_offset offsets[],
+				     bool enabled[], int width, int height)
 {
 	int count, i, j;
 	bool can_clone = false;
@@ -342,10 +342,10 @@ static bool drm_client_target_cloned(struct drm_device *dev,
 	return false;
 }
 
-static int drm_client_get_tile_offsets(struct drm_connector **connectors,
+static int drm_client_get_tile_offsets(struct drm_connector *connectors[],
 				       unsigned int connector_count,
-				       const struct drm_display_mode **modes,
-				       struct drm_client_offset *offsets,
+				       const struct drm_display_mode *modes[],
+				       struct drm_client_offset offsets[],
 				       int idx,
 				       int h_idx, int v_idx)
 {
@@ -375,11 +375,11 @@ static int drm_client_get_tile_offsets(struct drm_connector **connectors,
 	return 0;
 }
 
-static bool drm_client_target_preferred(struct drm_connector **connectors,
+static bool drm_client_target_preferred(struct drm_connector *connectors[],
 					unsigned int connector_count,
-					const struct drm_display_mode **modes,
-					struct drm_client_offset *offsets,
-					bool *enabled, int width, int height)
+					const struct drm_display_mode *modes[],
+					struct drm_client_offset offsets[],
+					bool enabled[], int width, int height)
 {
 	const u64 mask = BIT_ULL(connector_count) - 1;
 	struct drm_connector *connector;
@@ -491,10 +491,10 @@ static bool connector_has_possible_crtc(struct drm_connector *connector,
 }
 
 static int drm_client_pick_crtcs(struct drm_client_dev *client,
-				 struct drm_connector **connectors,
+				 struct drm_connector *connectors[],
 				 unsigned int connector_count,
-				 struct drm_crtc **best_crtcs,
-				 const struct drm_display_mode **modes,
+				 struct drm_crtc *best_crtcs[],
+				 const struct drm_display_mode *modes[],
 				 int n, int width, int height)
 {
 	struct drm_device *dev = client->dev;
@@ -566,12 +566,12 @@ static int drm_client_pick_crtcs(struct drm_client_dev *client,
 
 /* Try to read the BIOS display configuration and use it for the initial config */
 static bool drm_client_firmware_config(struct drm_client_dev *client,
-				       struct drm_connector **connectors,
+				       struct drm_connector *connectors[],
 				       unsigned int connector_count,
-				       struct drm_crtc **crtcs,
-				       const struct drm_display_mode **modes,
-				       struct drm_client_offset *offsets,
-				       bool *enabled, int width, int height)
+				       struct drm_crtc *crtcs[],
+				       const struct drm_display_mode *modes[],
+				       struct drm_client_offset offsets[],
+				       bool enabled[], int width, int height)
 {
 	const int count = min_t(unsigned int, connector_count, BITS_PER_LONG);
 	unsigned long conn_configured, conn_seq, mask;
-- 
2.43.2


  parent reply	other threads:[~2024-04-04 20:34 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-04 20:33 [PATCH 00/12] drm/client: Use after free and debug improvements Ville Syrjala
2024-04-04 20:33 ` [PATCH 01/12] drm/client: Fully protect modes[] with dev->mode_config.mutex Ville Syrjala
2024-04-05  3:24   ` Dmitry Baryshkov
2024-04-05 19:17     ` Ville Syrjälä
2024-04-05 20:39       ` Dmitry Baryshkov
2024-04-05 20:57         ` Ville Syrjälä
2024-04-04 20:33 ` [PATCH 02/12] drm/client: s/drm_connector_has_preferred_mode/drm_connector_preferred_mode/ Ville Syrjala
2024-04-05  3:27   ` Dmitry Baryshkov
2024-04-04 20:33 ` [PATCH 03/12] drm/client: Use drm_mode_destroy() Ville Syrjala
2024-04-05  3:28   ` Dmitry Baryshkov
2024-04-04 20:33 ` [PATCH 04/12] drm/client: Add a FIXME around crtc->mode usage Ville Syrjala
2024-04-05  3:32   ` Dmitry Baryshkov
2024-04-05 19:40     ` Ville Syrjälä
2024-04-04 20:33 ` [PATCH 05/12] drm/client: Nuke outdated fastboot comment Ville Syrjala
2024-04-05  3:33   ` Dmitry Baryshkov
2024-04-04 20:33 ` [PATCH 06/12] drm/client: Constify modes Ville Syrjala
2024-04-05  7:01   ` kernel test robot
2024-04-06 21:59   ` kernel test robot
2024-04-04 20:33 ` Ville Syrjala [this message]
2024-04-05  8:02   ` [PATCH 07/12] drm/client: Use array notation for function arguments Thomas Zimmermann
2024-04-04 20:33 ` [PATCH 08/12] drm/client: Extract drm_connector_first_mode() Ville Syrjala
2024-04-05  8:26   ` Jani Nikula
2024-04-04 20:33 ` [PATCH 09/12] drm/client: Switch to per-device debugs Ville Syrjala
2024-04-04 20:33 ` [PATCH 10/12] drm/client: Use [CONNECTOR:%d:%s] formatting Ville Syrjala
2024-04-05  8:23   ` Jani Nikula
2024-04-05 20:12     ` Ville Syrjälä
2024-04-04 20:33 ` [PATCH 11/12] drm/client: Streamline mode selection debugs Ville Syrjala
2024-04-05  7:49   ` Thomas Zimmermann
2024-04-05  7:57   ` Thomas Zimmermann
2024-04-05 19:58     ` Ville Syrjälä
2024-04-08  7:46       ` Thomas Zimmermann
2024-04-08 17:26         ` Ville Syrjälä
2024-04-09  8:01           ` Thomas Zimmermann
2024-04-04 20:33 ` [PATCH 12/12] drm/probe-helper: Switch to per-device debugs Ville Syrjala
2024-04-05  8:25   ` Jani Nikula
2024-04-05  8:30     ` Thomas Zimmermann
2024-04-05  8:04 ` [PATCH 00/12] drm/client: Use after free and debug improvements Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240404203336.10454-8-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox