[PATCH] accel/ivpu: Fix wrong register read in LNL failure diagnostics

[PATCH] accel/ivpu: Fix wrong register read in LNL failure diagnostics

[Karol Wachowski]

diagnose_failure_lnl() read VPU_HW_BTRS_MTL_INTERRUPT_STAT instead of
VPU_HW_BTRS_LNL_INTERRUPT_STAT, which on LNL and newer parts is a
different register with a different bit layout, so failure diagnostics
decoded the wrong register and reported a bogus error cause.
Read the LNL interrupt status register instead.

Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
---
 drivers/accel/ivpu/ivpu_hw_btrs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/accel/ivpu/ivpu_hw_btrs.c b/drivers/accel/ivpu/ivpu_hw_btrs.c
index dac935164e11..a17c829adb89 100644
--- a/drivers/accel/ivpu/ivpu_hw_btrs.c
+++ b/drivers/accel/ivpu/ivpu_hw_btrs.c
@@ -927,7 +927,7 @@ static void diagnose_failure_mtl(struct ivpu_device *vdev)
 
 static void diagnose_failure_lnl(struct ivpu_device *vdev)
 {
-	u32 reg = REGB_RD32(VPU_HW_BTRS_MTL_INTERRUPT_STAT) & BTRS_LNL_IRQ_MASK;
+	u32 reg = REGB_RD32(VPU_HW_BTRS_LNL_INTERRUPT_STAT) & BTRS_LNL_IRQ_MASK;
 
 	if (REG_TEST_FLD(VPU_HW_BTRS_LNL_INTERRUPT_STAT, ATS_ERR, reg)) {
 		ivpu_err(vdev, "ATS_ERR_LOG1 0x%08x ATS_ERR_LOG2 0x%08x\n",
-- 
2.43.0