From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 06/13] drm/omap: venc: remove set_type & invert_vid_out_polarity
Date: Fri, 12 May 2017 15:15:20 +0300 [thread overview]
Message-ID: <2192844.XFld0C13IJ@avalon> (raw)
In-Reply-To: <1494585702-9665-7-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Friday 12 May 2017 13:41:35 Tomi Valkeinen wrote:
> Non-DT booting is no longer supported, so remove legacy code.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 10 ----------
> drivers/gpu/drm/omapdrm/dss/omapdss.h | 10 ----------
> drivers/gpu/drm/omapdrm/dss/venc.c | 23 -------------------
> 3 files changed, 43 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c index
> f7a5731492d0..b1f6aa09f699 100644
> --- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> +++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> @@ -157,14 +157,6 @@ static int opa362_check_timings(struct omap_dss_device
> *dssdev, return in->ops.atv->check_timings(in, vm);
> }
>
> -static void opa362_set_type(struct omap_dss_device *dssdev,
> - enum omap_dss_venc_type type)
> -{
> - /* we can only drive a COMPOSITE output */
> - WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
> -
> -}
> -
> static const struct omapdss_atv_ops opa362_atv_ops = {
> .connect = opa362_connect,
> .disconnect = opa362_disconnect,
> @@ -175,8 +167,6 @@ static const struct omapdss_atv_ops opa362_atv_ops = {
> .check_timings = opa362_check_timings,
> .set_timings = opa362_set_timings,
> .get_timings = opa362_get_timings,
> -
> - .set_type = opa362_set_type,
> };
>
> static int opa362_probe(struct platform_device *pdev)
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> b/drivers/gpu/drm/omapdrm/dss/omapdss.h index 1ce53b072b16..abdb332019e9
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -525,11 +525,6 @@ struct omapdss_atv_ops {
> void (*get_timings)(struct omap_dss_device *dssdev,
> struct videomode *vm);
>
> - void (*set_type)(struct omap_dss_device *dssdev,
> - enum omap_dss_venc_type type);
> - void (*invert_vid_out_polarity)(struct omap_dss_device *dssdev,
> - bool invert_polarity);
> -
> int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
> u32 (*get_wss)(struct omap_dss_device *dssdev);
> };
> @@ -642,11 +637,6 @@ struct omap_dss_device {
> struct {
> int module;
> } dsi;
> -
> - struct {
> - enum omap_dss_venc_type type;
> - bool invert_polarity;
> - } venc;
> } phy;
>
> struct {
> diff --git a/drivers/gpu/drm/omapdrm/dss/venc.c
> b/drivers/gpu/drm/omapdrm/dss/venc.c index 8e836fddc390..a6bfb3918b8d
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/venc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/venc.c
> @@ -616,26 +616,6 @@ static int venc_set_wss(struct omap_dss_device *dssdev,
> u32 wss) return r;
> }
>
> -static void venc_set_type(struct omap_dss_device *dssdev,
> - enum omap_dss_venc_type type)
> -{
> - mutex_lock(&venc.venc_lock);
> -
> - venc.type = type;
> -
> - mutex_unlock(&venc.venc_lock);
> -}
> -
> -static void venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
> - bool invert_polarity)
> -{
> - mutex_lock(&venc.venc_lock);
> -
> - venc.invert_polarity = invert_polarity;
> -
> - mutex_unlock(&venc.venc_lock);
> -}
> -
> static int venc_init_regulator(void)
> {
> struct regulator *vdda_dac;
> @@ -779,9 +759,6 @@ static const struct omapdss_atv_ops venc_ops = {
> .set_timings = venc_set_timings,
> .get_timings = venc_get_timings,
>
> - .set_type = venc_set_type,
> - .invert_vid_out_polarity = venc_invert_vid_out_polarity,
> -
> .set_wss = venc_set_wss,
> .get_wss = venc_get_wss,
> };
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-05-12 12:15 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-12 10:41 [PATCH 00/13] drm/omap: legacy cleanup Tomi Valkeinen
2017-05-12 10:41 ` [PATCH 01/13] drm/omap: panel-dpi: remove non-DT support Tomi Valkeinen
2017-05-12 12:08 ` Laurent Pinchart
2017-05-12 12:29 ` Tomi Valkeinen
2017-05-12 12:30 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 02/13] drm/omap: acx565akm: " Tomi Valkeinen
2017-05-12 12:10 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 03/13] drm/omap: connector-analog-tv: " Tomi Valkeinen
2017-05-12 10:41 ` [PATCH 04/13] drm/omap: connector-dvi/hdmi: remove extra include Tomi Valkeinen
2017-05-12 12:14 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 05/13] drm/omap: sdi: remove legacy set_datapairs Tomi Valkeinen
2017-05-12 12:14 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 06/13] drm/omap: venc: remove set_type & invert_vid_out_polarity Tomi Valkeinen
2017-05-12 12:15 ` Laurent Pinchart [this message]
2017-05-12 10:41 ` [PATCH 07/13] drm/omap: remove recommended_bpp Tomi Valkeinen
2017-05-12 12:16 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 08/13] drm/omap: dpi: remove legacy data_lines Tomi Valkeinen
2017-05-12 12:17 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 09/13] drm/omap: remove rfbi Tomi Valkeinen
2017-05-12 12:18 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 10/13] drm/omap: remove unused get_dimensions() Tomi Valkeinen
2017-05-12 12:19 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 11/13] drm/omap: remove legacy get_resolution Tomi Valkeinen
2017-05-12 12:20 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 12/13] drm/omap: remove unused fields Tomi Valkeinen
2017-05-12 12:21 ` Laurent Pinchart
2017-05-12 10:41 ` [PATCH 13/13] drm/omap: remove omap_overlay & omap_overlay_manager Tomi Valkeinen
2017-05-12 12:25 ` Laurent Pinchart
2017-05-12 12:33 ` [PATCH 14/13] drm: omapdrm: Remove unused omap_dss_find_output() function Laurent Pinchart
2017-05-12 12:40 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2192844.XFld0C13IJ@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jsarha@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox