From: Thomas Hellstrom <thellstrom@vmware.com>
To: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 3/6] drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held
Date: Wed, 28 Nov 2012 12:54:42 +0100 [thread overview]
Message-ID: <50B5FB82.9020904@vmware.com> (raw)
In-Reply-To: <1354101944-10455-3-git-send-email-maarten.lankhorst@canonical.com>
On 11/28/2012 12:25 PM, Maarten Lankhorst wrote:
> By removing the unlocking of lru and retaking it immediately, a race is
> removed where the bo is taken off the swap list or the lru list between
> the unlock and relock. As such the cleanup_refs code can be simplified,
> it will attempt to call ttm_bo_wait non-blockingly, and if it fails
> it will drop the locks and perform a blocking wait, or return an error
> if no_wait_gpu was set.
>
> The need for looping is also eliminated, since swapout and evict_mem_first
> will always follow the destruction path, so no new fence is allowed
> to be attached. As far as I can see this may already have been the case,
> but the unlocking / relocking required a complicated loop to deal with
> re-reservation.
>
> The downside is that ttm_bo_cleanup_memtype_use is no longer called with
> reservation held, so drivers must be aware that move_notify with a null
> parameter doesn't require a reservation.
Why can't we unreserve *after* ttm_bo_cleanup_memtype_use? That's not
immediately clear from this patch.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
> ---
> drivers/gpu/drm/ttm/ttm_bo.c | 112 +++++++++++++++++++++++--------------------
> 1 file changed, 60 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
> index 202fc20..02b275b 100644
> --- a/drivers/gpu/drm/ttm/ttm_bo.c
> +++ b/drivers/gpu/drm/ttm/ttm_bo.c
> @@ -486,14 +486,6 @@ static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
> bo->ttm = NULL;
> }
> ttm_bo_mem_put(bo, &bo->mem);
> -
> - atomic_set(&bo->reserved, 0);
> -
> - /*
> - * Make processes trying to reserve really pick it up.
> - */
> - smp_mb__after_atomic_dec();
> - wake_up_all(&bo->event_queue);
> }
>
> static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
> @@ -515,6 +507,9 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
> put_count = ttm_bo_del_from_lru(bo);
>
> spin_unlock(&glob->lru_lock);
> + atomic_set(&bo->reserved, 0);
> + wake_up_all(&bo->event_queue);
> +
I think (although I'm not 100% sure) that if we use atomic_set() to
unreserve, and it's not followed by a spin_unlock(), we need to insert
a memory barrier, like is done above in the removed code, otherwise
memory operations protected by reserve may be reordered until after
reservation.
> ttm_bo_cleanup_memtype_use(bo);
>
> ttm_bo_list_ref_sub(bo, put_count, true);
> @@ -543,68 +538,72 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
> }
>
> /**
> - * function ttm_bo_cleanup_refs
> + * function ttm_bo_cleanup_refs_and_unlock
> * If bo idle, remove from delayed- and lru lists, and unref.
> * If not idle, do nothing.
> *
> + * Must be called with lru_lock and reservation held, this function
> + * will drop both before returning.
> + *
> * @interruptible Any sleeps should occur interruptibly.
> - * @no_wait_reserve Never wait for reserve. Return -EBUSY instead.
> * @no_wait_gpu Never wait for gpu. Return -EBUSY instead.
> */
>
> -static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo,
> - bool interruptible,
> - bool no_wait_reserve,
> - bool no_wait_gpu)
> +static int ttm_bo_cleanup_refs_and_unlock(struct ttm_buffer_object *bo,
> + bool interruptible,
> + bool no_wait_gpu)
> {
> struct ttm_bo_device *bdev = bo->bdev;
> + struct ttm_bo_driver *driver = bdev->driver;
> struct ttm_bo_global *glob = bo->glob;
> int put_count;
> int ret = 0;
>
> -retry:
> spin_lock(&bdev->fence_lock);
> - ret = ttm_bo_wait(bo, false, interruptible, no_wait_gpu);
> - spin_unlock(&bdev->fence_lock);
> + ret = ttm_bo_wait(bo, false, false, true);
>
> - if (unlikely(ret != 0))
> + if (ret && no_wait_gpu) {
> + spin_unlock(&bdev->fence_lock);
> + atomic_set(&bo->reserved, 0);
> + wake_up_all(&bo->event_queue);
> + spin_unlock(&glob->lru_lock);
> return ret;
> + } else if (ret) {
> + void *sync_obj;
>
> -retry_reserve:
> - spin_lock(&glob->lru_lock);
> -
> - if (unlikely(list_empty(&bo->ddestroy))) {
> + /**
> + * Take a reference to the fence and unreserve,
> + * at this point the buffer should be dead, so
> + * no new sync objects can be attached.
> + */
> + sync_obj = driver->sync_obj_ref(&bo->sync_obj);
> + spin_unlock(&bdev->fence_lock);
> + atomic_set(&bo->reserved, 0);
> + wake_up_all(&bo->event_queue);
> spin_unlock(&glob->lru_lock);
> - return 0;
> - }
> -
> - ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
>
> - if (unlikely(ret == -EBUSY)) {
> - spin_unlock(&glob->lru_lock);
> - if (likely(!no_wait_reserve))
> - ret = ttm_bo_wait_unreserved(bo, interruptible);
> - if (unlikely(ret != 0))
> + ret = driver->sync_obj_wait(sync_obj, false, interruptible);
> + driver->sync_obj_unref(&sync_obj);
> + if (ret)
> return ret;
>
> - goto retry_reserve;
> - }
> -
> - BUG_ON(ret != 0);
> + /* remove sync_obj with ttm_bo_wait */
> + spin_lock(&bdev->fence_lock);
> + ret = ttm_bo_wait(bo, false, false, true);
> + spin_unlock(&bdev->fence_lock);
>
> - /**
> - * We can re-check for sync object without taking
> - * the bo::lock since setting the sync object requires
> - * also bo::reserved. A busy object at this point may
> - * be caused by another thread recently starting an accelerated
> - * eviction.
> - */
> + WARN_ON(ret);
>
> - if (unlikely(bo->sync_obj)) {
> + spin_lock(&glob->lru_lock);
> + } else {
> + spin_unlock(&bdev->fence_lock);
> atomic_set(&bo->reserved, 0);
> wake_up_all(&bo->event_queue);
> + }
> +
> + if (unlikely(list_empty(&bo->ddestroy))) {
> spin_unlock(&glob->lru_lock);
> - goto retry;
> + return 0;
> }
>
> put_count = ttm_bo_del_from_lru(bo);
> @@ -647,9 +646,13 @@ static int ttm_bo_delayed_delete(struct ttm_bo_device *bdev, bool remove_all)
> kref_get(&nentry->list_kref);
> }
>
> - spin_unlock(&glob->lru_lock);
> - ret = ttm_bo_cleanup_refs(entry, false, !remove_all,
> - !remove_all);
> + ret = ttm_bo_reserve_locked(entry, false, !remove_all, false, 0);
> + if (!ret)
> + ret = ttm_bo_cleanup_refs_and_unlock(entry, false,
> + !remove_all);
> + else
> + spin_unlock(&glob->lru_lock);
> +
> kref_put(&entry->list_kref, ttm_bo_release_list);
> entry = nentry;
>
> @@ -803,9 +806,13 @@ retry:
> kref_get(&bo->list_kref);
>
> if (!list_empty(&bo->ddestroy)) {
> - spin_unlock(&glob->lru_lock);
> - ret = ttm_bo_cleanup_refs(bo, interruptible,
> - no_wait_reserve, no_wait_gpu);
> + ret = ttm_bo_reserve_locked(bo, interruptible, no_wait_reserve, false, 0);
> + if (!ret)
> + ret = ttm_bo_cleanup_refs_and_unlock(bo, interruptible,
> + no_wait_gpu);
> + else
> + spin_unlock(&glob->lru_lock);
> +
> kref_put(&bo->list_kref, ttm_bo_release_list);
>
> return ret;
> @@ -1799,8 +1806,9 @@ static int ttm_bo_swapout(struct ttm_mem_shrink *shrink)
> kref_get(&bo->list_kref);
>
> if (!list_empty(&bo->ddestroy)) {
> - spin_unlock(&glob->lru_lock);
> - (void) ttm_bo_cleanup_refs(bo, false, false, false);
> + ttm_bo_reserve_locked(bo, false, false, false, 0);
> + ttm_bo_cleanup_refs_and_unlock(bo, false, false);
> +
> kref_put(&bo->list_kref, ttm_bo_release_list);
> spin_lock(&glob->lru_lock);
> continue;
next prev parent reply other threads:[~2012-11-28 11:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-28 11:25 [PATCH 1/6] drm/ttm: change fence_lock to inner lock Maarten Lankhorst
2012-11-28 11:25 ` [PATCH 2/6] drm/radeon: allow move_notify to be called without reservation Maarten Lankhorst
2012-11-28 11:25 ` [PATCH 3/6] drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held Maarten Lankhorst
2012-11-28 11:54 ` Thomas Hellstrom [this message]
2012-11-28 12:15 ` Maarten Lankhorst
2012-11-28 13:21 ` Thomas Hellstrom
2012-11-28 13:55 ` Maarten Lankhorst
2012-11-28 14:23 ` Thomas Hellstrom
2012-11-28 14:46 ` Maarten Lankhorst
2012-11-28 15:10 ` Thomas Hellstrom
2012-11-28 18:32 ` Maarten Lankhorst
2012-11-28 19:21 ` Thomas Hellstrom
2012-11-28 22:26 ` Maarten Lankhorst
2012-11-29 9:42 ` Thomas Hellstrom
2012-11-29 11:36 ` [PATCH 3/6] drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held, v3 Maarten Lankhorst
2012-11-29 20:43 ` Thomas Hellstrom
2012-11-28 12:28 ` [PATCH 3/6] drm/ttm: call ttm_bo_cleanup_refs with reservation and lru lock held Maarten Lankhorst
2012-11-28 11:25 ` [PATCH 4/6] drm/ttm: cope with reserved buffers on swap list in ttm_bo_swapout, v2 Maarten Lankhorst
2012-11-28 14:27 ` Thomas Hellstrom
2012-11-28 11:25 ` [PATCH 5/6] drm/ttm: cope with reserved buffers on lru list in ttm_mem_evict_first, v2 Maarten Lankhorst
2012-11-28 11:25 ` [PATCH 6/6] drm/ttm: remove no_wait_reserve, v3 Maarten Lankhorst
2012-11-28 11:40 ` [PATCH 1/6] drm/ttm: change fence_lock to inner lock Thomas Hellstrom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50B5FB82.9020904@vmware.com \
--to=thellstrom@vmware.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=m.b.lankhorst@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox