dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Jyri Sarha <jsarha@ti.com>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCHv2 02/17] drm/omap: cleanup fbdev init/free
Date: Wed, 28 Feb 2018 23:18:27 +0200	[thread overview]
Message-ID: <5211304.1fMlPktsyB@avalon> (raw)
In-Reply-To: <1519817174-20714-3-git-send-email-tomi.valkeinen@ti.com>

Hi Tomi,

Thank you for the patch.

On Wednesday, 28 February 2018 13:25:59 EET Tomi Valkeinen wrote:
> omap_fbdev_init() and omap_fbdev_free() use priv->fbdev directly.
> However, omap_fbdev_init() returns the fbdev, and omap_drv.c also
> assigns the return value to priv->fbdev. This is slightly confusing.
> 
> Clean this up by removing the omap_fbdev_init() return value, as we
> don't care whether fbdev init succeeded or not. Also change omap_drv.c
> to call omap_fbdev_free() always, and omap_fbdev_free() does the check
> if fbdev was initialized.
> 
> While at it, rename omap_fbdev_free() to omap_fbdev_fini() to better
> match the "init" counterpart.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/omap_drv.c   |  9 ++++-----
>  drivers/gpu/drm/omapdrm/omap_fbdev.c | 18 ++++++++----------
>  drivers/gpu/drm/omapdrm/omap_fbdev.h |  9 ++++-----
>  3 files changed, 16 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 65a567dcf3ab..4f48b908bdc6
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -570,7 +570,7 @@ static int omapdrm_init(struct omap_drm_private *priv,
> struct device *dev) for (i = 0; i < priv->num_crtcs; i++)
>  		drm_crtc_vblank_off(priv->crtcs[i]);
> 
> -	priv->fbdev = omap_fbdev_init(ddev);
> +	omap_fbdev_init(ddev);
> 
>  	drm_kms_helper_poll_init(ddev);
>  	omap_modeset_enable_external_hpd();
> @@ -588,8 +588,8 @@ static int omapdrm_init(struct omap_drm_private *priv,
> struct device *dev) err_cleanup_helpers:
>  	omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +
> +	omap_fbdev_fini(ddev);
>  err_cleanup_modeset:
>  	drm_mode_config_cleanup(ddev);
>  	omap_drm_irq_uninstall(ddev);
> @@ -615,8 +615,7 @@ static void omapdrm_cleanup(struct omap_drm_private
> *priv) omap_modeset_disable_external_hpd();
>  	drm_kms_helper_poll_fini(ddev);
> 
> -	if (priv->fbdev)
> -		omap_fbdev_free(ddev);
> +	omap_fbdev_fini(ddev);
> 
>  	drm_atomic_helper_shutdown(ddev);
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> b/drivers/gpu/drm/omapdrm/omap_fbdev.c index 632ebcf2165f..be94480326d7
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
> @@ -242,7 +242,7 @@ static struct drm_fb_helper *get_fb(struct fb_info *fbi)
> }
> 
>  /* initialize fbdev helper */
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +void omap_fbdev_init(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct omap_fbdev *fbdev = NULL;
> @@ -260,10 +260,8 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev) drm_fb_helper_prepare(dev, helper, &omap_fb_helper_funcs);
> 
>  	ret = drm_fb_helper_init(dev, helper, priv->num_connectors);
> -	if (ret) {
> -		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
> +	if (ret)
>  		goto fail;
> -	}
> 
>  	ret = drm_fb_helper_single_add_all_connectors(helper);
>  	if (ret)
> @@ -275,7 +273,7 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev)
> 
>  	priv->fbdev = helper;
> 
> -	return helper;
> +	return;
> 
>  fini:
>  	drm_fb_helper_fini(helper);
> @@ -283,12 +281,9 @@ struct drm_fb_helper *omap_fbdev_init(struct drm_device
> *dev) kfree(fbdev);
> 
>  	dev_warn(dev->dev, "omap_fbdev_init failed\n");
> -	/* well, limp along without an fbdev.. maybe X11 will work? */
> -
> -	return NULL;
>  }
> 
> -void omap_fbdev_free(struct drm_device *dev)
> +void omap_fbdev_fini(struct drm_device *dev)
>  {
>  	struct omap_drm_private *priv = dev->dev_private;
>  	struct drm_fb_helper *helper = priv->fbdev;
> @@ -296,11 +291,14 @@ void omap_fbdev_free(struct drm_device *dev)
> 
>  	DBG();
> 
> +	if (!helper)
> +		return;
> +
>  	drm_fb_helper_unregister_fbi(helper);
> 
>  	drm_fb_helper_fini(helper);
> 
> -	fbdev = to_omap_fbdev(priv->fbdev);
> +	fbdev = to_omap_fbdev(helper);
> 
>  	/* unpin the GEM object pinned in omap_fbdev_create() */
>  	if (fbdev->bo)
> diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.h
> b/drivers/gpu/drm/omapdrm/omap_fbdev.h index 1f5ba0996a1a..7dfd843f73f1
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_fbdev.h
> +++ b/drivers/gpu/drm/omapdrm/omap_fbdev.h
> @@ -24,14 +24,13 @@ struct drm_device;
>  struct drm_fb_helper;
> 
>  #ifdef CONFIG_DRM_FBDEV_EMULATION
> -struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
> -void omap_fbdev_free(struct drm_device *dev);
> +void omap_fbdev_init(struct drm_device *dev);
> +void omap_fbdev_fini(struct drm_device *dev);
>  #else
> -static inline struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
> +static inline void omap_fbdev_init(struct drm_device *dev)
>  {
> -	return NULL;
>  }
> -static inline void omap_fbdev_free(struct drm_device *dev)
> +static inline void omap_fbdev_fini(struct drm_device *dev)
>  {
>  }
>  #endif

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-02-28 21:17 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-28 11:25 [PATCHv2 00/17] drm/omap: misc patches Tomi Valkeinen
2018-02-28 11:25 ` [PATCHv2 01/17] drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called Tomi Valkeinen
2018-06-10 12:22   ` Sebastian Reichel
2018-02-28 11:25 ` [PATCHv2 02/17] drm/omap: cleanup fbdev init/free Tomi Valkeinen
2018-02-28 21:18   ` Laurent Pinchart [this message]
2018-06-10 13:18   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 03/17] drm/omap: Init fbdev emulation only when we have displays Tomi Valkeinen
2018-06-10 13:19   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 04/17] drm/omap: add HPD support to connector-dvi Tomi Valkeinen
2018-02-28 21:19   ` Laurent Pinchart
2018-06-10 13:53   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 05/17] dt-bindings: display: add HPD gpio to DVI connector Tomi Valkeinen
2018-06-10 13:54   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 06/17] drm/omap: remove leftover enums Tomi Valkeinen
2018-06-10 13:57   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 07/17] drm/omap: dispc: disp_wb_setup to check return code Tomi Valkeinen
2018-06-10 14:03   ` Sebastian Reichel
2018-02-28 11:26 ` [PATCHv2 08/17] drm/omap: Add pclk setting case when channel is DSS_WB Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 09/17] drm/omap: set WB channel-in in wb_setup() Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 10/17] drm/omap: fix WBDELAYCOUNT for HDMI Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 11/17] drm/omap: fix WBDELAYCOUNT with interlace Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 12/17] drm/omap: fix WB height " Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 13/17] drm/omap: fix scaling limits for WB Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 14/17] drm/omap: add writeback funcs to dispc_ops Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 15/17] drm/omap: fix maximum sizes Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 16/17] drm/omap: Allow HDMI audio setup even if we do not have video configured Tomi Valkeinen
2018-02-28 11:26 ` [PATCHv2 17/17] drm/omap: cleanup color space conversion Tomi Valkeinen
2018-02-28 21:23   ` Laurent Pinchart
2018-03-01  7:02     ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5211304.1fMlPktsyB@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox