From: "Christian König" <deathsimple@vodafone.de>
To: Alex Deucher <alexdeucher@gmail.com>
Cc: "Michel Dänzer" <michel@daenzer.net>,
"Maling list - DRI developers" <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH] drm/radeon: Sync ME and PFP after CP semaphore waits v2
Date: Mon, 18 Aug 2014 17:14:43 +0200 [thread overview]
Message-ID: <53F21863.6050906@vodafone.de> (raw)
In-Reply-To: <CADnq5_PuoRLjZb2Tc-3VuCw+wns50E+0THcay75JoGyDpgxziw@mail.gmail.com>
Am 18.08.2014 um 17:02 schrieb Alex Deucher:
> On Mon, Aug 18, 2014 at 10:30 AM, Christian König
> <deathsimple@vodafone.de> wrote:
>> From: Christian König <christian.koenig@amd.com>
>>
>> Fixes lockups due to CP read GPUVM faults when running piglit on Cape
>> Verde.
>>
>> v2 (chk): apply the fix to R600+ as well, on CIK only the GFX CP has
>> a PFP, add more comments to R600 code, enable flushing again
>>
>> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
>> Signed-off-by: Christian König <christian.koenig@amd.com>
> I just checked the ucode. This packet only exists on 7xx and newer.
> How about the attached change?
Works for me as well.
On a side note: Where did you find the documentation if that's present
on R600? I could only confirm that it works on RV710 and so just assumed
that it works on R6XX the same way.
Thanks for double checking that,
Christian.
>
> Alex
>
>> ---
>> drivers/gpu/drm/radeon/cik.c | 17 +++++++++++++++++
>> drivers/gpu/drm/radeon/r600.c | 17 +++++++++++++++++
>> drivers/gpu/drm/radeon/r600d.h | 1 +
>> drivers/gpu/drm/radeon/radeon_vm.c | 4 +---
>> 4 files changed, 36 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
>> index e7d99e1..8b556f2 100644
>> --- a/drivers/gpu/drm/radeon/cik.c
>> +++ b/drivers/gpu/drm/radeon/cik.c
>> @@ -3920,6 +3920,17 @@ void cik_fence_compute_ring_emit(struct radeon_device *rdev,
>> radeon_ring_write(ring, 0);
>> }
>>
>> +/**
>> + * cik_semaphore_ring_emit - emit a semaphore on the CP ring
>> + *
>> + * @rdev: radeon_device pointer
>> + * @ring: radeon ring buffer object
>> + * @semaphore: radeon semaphore object
>> + * @emit_wait: Is this a sempahore wait?
>> + *
>> + * Emits a semaphore signal/wait packet to the CP ring and prevents the PFP
>> + * from running ahead of semaphore waits.
>> + */
>> bool cik_semaphore_ring_emit(struct radeon_device *rdev,
>> struct radeon_ring *ring,
>> struct radeon_semaphore *semaphore,
>> @@ -3932,6 +3943,12 @@ bool cik_semaphore_ring_emit(struct radeon_device *rdev,
>> radeon_ring_write(ring, lower_32_bits(addr));
>> radeon_ring_write(ring, (upper_32_bits(addr) & 0xffff) | sel);
>>
>> + if (emit_wait && ring->idx == RADEON_RING_TYPE_GFX_INDEX) {
>> + /* Prevent the PFP from running ahead of the semaphore wait */
>> + radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
>> + radeon_ring_write(ring, 0x0);
>> + }
>> +
>> return true;
>> }
>>
>> diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
>> index c70a504..d659fa5 100644
>> --- a/drivers/gpu/drm/radeon/r600.c
>> +++ b/drivers/gpu/drm/radeon/r600.c
>> @@ -2753,6 +2753,17 @@ void r600_fence_ring_emit(struct radeon_device *rdev,
>> }
>> }
>>
>> +/**
>> + * r600_semaphore_ring_emit - emit a semaphore on the CP ring
>> + *
>> + * @rdev: radeon_device pointer
>> + * @ring: radeon ring buffer object
>> + * @semaphore: radeon semaphore object
>> + * @emit_wait: Is this a sempahore wait?
>> + *
>> + * Emits a semaphore signal/wait packet to the CP ring and prevents the PFP
>> + * from running ahead of semaphore waits.
>> + */
>> bool r600_semaphore_ring_emit(struct radeon_device *rdev,
>> struct radeon_ring *ring,
>> struct radeon_semaphore *semaphore,
>> @@ -2768,6 +2779,12 @@ bool r600_semaphore_ring_emit(struct radeon_device *rdev,
>> radeon_ring_write(ring, lower_32_bits(addr));
>> radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);
>>
>> + if (emit_wait) {
>> + /* Prevent the PFP from running ahead of the semaphore wait */
>> + radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
>> + radeon_ring_write(ring, 0x0);
>> + }
>> +
>> return true;
>> }
>>
>> diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
>> index f94e7a9..1272c0d 100644
>> --- a/drivers/gpu/drm/radeon/r600d.h
>> +++ b/drivers/gpu/drm/radeon/r600d.h
>> @@ -1597,6 +1597,7 @@
>> */
>> # define PACKET3_CP_DMA_CMD_SAIC (1 << 28)
>> # define PACKET3_CP_DMA_CMD_DAIC (1 << 29)
>> +#define PACKET3_PFP_SYNC_ME 0x42
>> #define PACKET3_SURFACE_SYNC 0x43
>> # define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
>> # define PACKET3_FULL_CACHE_ENA (1 << 20) /* r7xx+ only */
>> diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
>> index 058f200..9c8358f 100644
>> --- a/drivers/gpu/drm/radeon/radeon_vm.c
>> +++ b/drivers/gpu/drm/radeon/radeon_vm.c
>> @@ -238,9 +238,7 @@ void radeon_vm_flush(struct radeon_device *rdev,
>> uint64_t pd_addr = radeon_bo_gpu_offset(vm->page_directory);
>>
>> /* if we can't remember our last VM flush then flush now! */
>> - /* XXX figure out why we have to flush all the time before CIK */
>> - if (rdev->family < CHIP_BONAIRE ||
>> - !vm->last_flush || pd_addr != vm->pd_gpu_addr) {
>> + if (!vm->last_flush || pd_addr != vm->pd_gpu_addr) {
>> trace_radeon_vm_flush(pd_addr, ring, vm->id);
>> vm->pd_gpu_addr = pd_addr;
>> radeon_ring_vm_flush(rdev, ring, vm);
>> --
>> 1.9.1
>>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-08-18 15:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 14:30 [PATCH] drm/radeon: Sync ME and PFP after CP semaphore waits v2 Christian König
2014-08-18 15:02 ` Alex Deucher
2014-08-18 15:14 ` Christian König [this message]
2014-08-19 5:57 ` Michel Dänzer
2014-08-19 16:03 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F21863.6050906@vodafone.de \
--to=deathsimple@vodafone.de \
--cc=alexdeucher@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=michel@daenzer.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox