From: Andrzej Hajda <a.hajda@samsung.com>
To: Inki Dae <inki.dae@samsung.com>,
Thierry Reding <thierry.reding@gmail.com>
Cc: kyungmin.park@samsung.com,
"Matwey V. Kornilov" <matwey.kornilov@gmail.com>,
sw0312.kim@samsung.com,
DRI mailing list <dri-devel@lists.freedesktop.org>
Subject: Re: exynos-drm registration: infinite loop
Date: Thu, 06 Nov 2014 09:03:00 +0100 [thread overview]
Message-ID: <545B2B34.1010901@samsung.com> (raw)
In-Reply-To: <545B13DF.4040503@samsung.com>
On 11/06/2014 07:23 AM, Inki Dae wrote:
> On 2014년 11월 05일 23:38, Thierry Reding wrote:
>> On Tue, Nov 04, 2014 at 09:18:46PM +0400, Matwey V. Kornilov wrote:
>>> Hi,
>>>
>>> I run 3.18-rc3 kernel on BeagleBone Black. It doesn't have Exynos DRM
>>> of course, but I run multi-platform kernel where CONFIG_DRM_EXYNOS is
>>> set to 'y'.
>>> The issue here is that the platform probe/init goes to infinite loop
>>> as the following:
>>>
>>> [ 5.717343] platform exynos-drm: Driver exynos-drm requests probe deferral
>>> [ 5.726848] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
>>> [ 5.734700] platform exynos-drm: Driver exynos-drm requests probe deferral
>>> [ 5.744044] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
>>> [ 5.752010] platform exynos-drm: Driver exynos-drm requests probe deferral
>>> [ 5.761377] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
>>> [ 5.769291] platform exynos-drm: Driver exynos-drm requests probe deferral
>>>
>>> It is quite unexpectable behavior. I would expect that the exynos-drm
>>> failed to initialize with 'no device' error.
>>>
>>> See also for the reference: https://bugzilla.kernel.org/show_bug.cgi?id=87691
>>
>> The reason for this seems to be that Exynos DRM instantiates a dummy
>> device that it can bind to (see exynos_drm_init()). Now this code is
>> executed unconditonally, so the device will be created whether or not
>> the kernel/module runs on an Exynos SoC. The driver should really bind
>> to some real device rather than instantiating a dummy. Or if it must
>> bind to a dummy then the code needs to at least check that it's running
>> on an Exynos SoC before instantiating the dummy.
>>
>
> Right, I also think the problem is because we use a dummay device for
> Exynos drm. As you mentioned, this device can always be bound as long as
> Exynos drm driver is enabled even without real device. So this issue
> gives us that we need super device node again. Actually, I had already
> tried the use of the super device node like below for Exynos drm but
> other Samsung guys didn't want to use it.
> http://lists.freedesktop.org/archives/dri-devel/2014-April/056618.html
>
> I think now we have the reason that we should use super device node so I
> will try to support the super device for Exynos drm like other ARM drm
> drivers did. However, for this, I'd like to listen to other opinions
> for a while before that.
It is enough to check if there are platform devices compatible with
drivers registered by exynos_drm_dev.
Regards
Andrzej
>
> Thanks,
> Inki Dae
>
>> Thierry
>>
>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2014-11-06 8:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-04 17:18 exynos-drm registration: infinite loop Matwey V. Kornilov
2014-11-05 14:38 ` Thierry Reding
2014-11-05 16:47 ` Matwey V. Kornilov
2014-11-06 6:23 ` Inki Dae
2014-11-06 8:03 ` Andrzej Hajda [this message]
2014-11-06 8:45 ` Inki Dae
2014-11-06 8:49 ` Matwey V. Kornilov
2014-11-06 9:03 ` Inki Dae
2014-11-06 9:29 ` Thierry Reding
2014-11-06 9:51 ` Inki Dae
2014-11-06 5:45 ` Inki Dae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545B2B34.1010901@samsung.com \
--to=a.hajda@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=inki.dae@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=matwey.kornilov@gmail.com \
--cc=sw0312.kim@samsung.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox