From: Mario Kleiner <mario.kleiner.de@gmail.com>
To: Daniel Vetter <daniel.vetter@ffwll.ch>,
DRI Development <dri-devel@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>, Ben Skeggs <bskeggs@redhat.com>
Subject: Re: [PATCH] drm/nouveau: Use drm_vblank_on/off consistently
Date: Wed, 17 Jun 2015 02:01:36 +0200 [thread overview]
Message-ID: <5580B8E0.9010509@gmail.com> (raw)
In-Reply-To: <1434348449-28631-1-git-send-email-daniel.vetter@ffwll.ch>
On 06/15/2015 08:07 AM, Daniel Vetter wrote:
> In
>
> commit 9cba5efab5a8145ae6c52ea273553f069c294482
> Author: Mario Kleiner <mario.kleiner.de@gmail.com>
> Date: Tue Jul 29 02:36:44 2014 +0200
>
> drm/nouveau: Dis/Enable vblank irqs during suspend/resume
>
> drm_vblank_on/off calls where added around suspend/resume to make sure
> vblank stay doesn't go boom over that transition. But nouveau already
> used drm_vblank_pre/post_modeset over modesets. Instead use
> drm_vblank_on/off everyhwere. The slight change here is that after
> _off drm_vblank_get will refuse to work right away, but nouveau
> doesn't seem to depend upon that anywhere outside of the pageflip
> paths.
>
> The longer-term plan here is to switch all kms drivers to
> drm_vblank_on/off so that common code like pending event cleanup can
> be done there, while drm_vblank_pre/post_modeset will be purely
> drm internal for the old UMS ioctl.
>
> Note that the drm_vblank_off still seems required in the suspend path
> since nouveau doesn't explicitly disable crtcs. But on the resume side
> drm_helper_resume_force_mode should end up calling drm_vblank_on
> through the nouveau crtc hooks already. Hence remove the call in the
> resume code.
>
> v2: Don't forget about nv50+, reported by Mario.
>
> Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
> Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
> Cc: Ben Skeggs <bskeggs@redhat.com>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> ---
> drivers/gpu/drm/nouveau/dispnv04/crtc.c | 4 ++--
> drivers/gpu/drm/nouveau/nouveau_display.c | 6 +-----
> drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++++++
> 3 files changed, 11 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/nouveau/dispnv04/crtc.c b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
> index 3d96b49fe662..dab24066fa21 100644
> --- a/drivers/gpu/drm/nouveau/dispnv04/crtc.c
> +++ b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
> @@ -708,7 +708,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc)
> if (nv_two_heads(dev))
> NVSetOwner(dev, nv_crtc->index);
>
> - drm_vblank_pre_modeset(dev, nv_crtc->index);
> + drm_vblank_off(dev, nv_crtc->index);
> funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
>
> NVBlankScreen(dev, nv_crtc->index, true);
> @@ -740,7 +740,7 @@ static void nv_crtc_commit(struct drm_crtc *crtc)
> #endif
>
> funcs->dpms(crtc, DRM_MODE_DPMS_ON);
> - drm_vblank_post_modeset(dev, nv_crtc->index);
> + drm_vblank_on(dev, nv_crtc->index);
> }
>
> static void nv_crtc_destroy(struct drm_crtc *crtc)
> diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
> index 8670d90cdc11..9d2d647da3aa 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_display.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_display.c
> @@ -584,7 +584,7 @@ nouveau_display_resume(struct drm_device *dev, bool runtime)
> {
> struct nouveau_drm *drm = nouveau_drm(dev);
> struct drm_crtc *crtc;
> - int ret, head;
> + int ret;
>
> /* re-pin fb/cursors */
> list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
> @@ -620,10 +620,6 @@ nouveau_display_resume(struct drm_device *dev, bool runtime)
> nv_crtc->lut.depth = 0;
> }
>
> - /* Make sure that drm and hw vblank irqs get resumed if needed. */
> - for (head = 0; head < dev->mode_config.num_crtc; head++)
> - drm_vblank_on(dev, head);
> -
> /* This should ensure we don't hit a locking problem when someone
> * wakes us up via a connector. We should never go into suspend
> * while the display is on anyways.
> diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
> index 7da7958556a3..a16c37d8f7e1 100644
> --- a/drivers/gpu/drm/nouveau/nv50_display.c
> +++ b/drivers/gpu/drm/nouveau/nv50_display.c
> @@ -997,6 +997,10 @@ nv50_crtc_cursor_show_hide(struct nouveau_crtc *nv_crtc, bool show, bool update)
> static void
> nv50_crtc_dpms(struct drm_crtc *crtc, int mode)
> {
> + if (mode == DRM_MODE_DPMS_ON)
> + drm_crtc_vblank_on(crtc);
> + else
> + drm_crtc_vblank_off(crtc);
> }
>
> static void
> @@ -1036,6 +1040,8 @@ nv50_crtc_prepare(struct drm_crtc *crtc)
> }
>
> nv50_crtc_cursor_show_hide(nv_crtc, false, false);
> +
> + drm_crtc_vblank_on(crtc);
> }
>
> static void
> @@ -1045,6 +1051,8 @@ nv50_crtc_commit(struct drm_crtc *crtc)
> struct nv50_mast *mast = nv50_mast(crtc->dev);
> u32 *push;
>
> + drm_crtc_vblank_on(crtc);
> +
> push = evo_wait(mast, 32);
> if (push) {
> if (nv50_vers(mast) < G82_DISP_CORE_CHANNEL_DMA) {
>
This is
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
-mario
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
prev parent reply other threads:[~2015-06-17 0:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-27 9:04 [PATCH 1/3] drm/nouveau: Use drm_vblank_on/off consistently Daniel Vetter
2015-05-27 9:04 ` [PATCH 2/3] drm/radeon: Switch to drm_vblank_on/off Daniel Vetter
2015-05-27 9:21 ` Michel Dänzer
2015-05-27 9:41 ` Daniel Vetter
2015-05-28 7:11 ` Michel Dänzer
2015-05-28 8:38 ` Daniel Vetter
2015-05-28 9:03 ` Michel Dänzer
2015-07-14 8:13 ` Michel Dänzer
2015-08-07 7:26 ` Michel Dänzer
2015-08-07 7:52 ` Daniel Vetter
2015-05-27 9:04 ` [PATCH 3/3] drm/irq: Make drm_vblank_pre/post_modeset internal Daniel Vetter
2015-05-29 16:50 ` [PATCH 1/3] drm/nouveau: Use drm_vblank_on/off consistently Mario Kleiner
2015-05-29 17:19 ` Daniel Vetter
2015-05-29 17:23 ` Mario Kleiner
2015-05-29 17:35 ` Daniel Vetter
2015-06-05 19:40 ` Mario Kleiner
2015-06-15 6:07 ` [PATCH] " Daniel Vetter
2015-06-17 0:01 ` Mario Kleiner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5580B8E0.9010509@gmail.com \
--to=mario.kleiner.de@gmail.com \
--cc=bskeggs@redhat.com \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox