dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Pitoiset <samuel.pitoiset@gmail.com>
To: Rob Clark <robdclark@gmail.com>
Cc: "dri-devel@lists.freedesktop.org" <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH] rnndb/dsi: Add more bits for DSI PHY
Date: Mon, 24 Aug 2015 22:26:31 +0200	[thread overview]
Message-ID: <55DB7DF7.9030008@gmail.com> (raw)
In-Reply-To: <CAF6AEGuwtbHQP-D4zH-DeoskBWDAH1xA765=_d_TXB-y5M9Hgg@mail.gmail.com>



On 08/24/2015 10:16 PM, Rob Clark wrote:
> On Mon, Aug 24, 2015 at 4:20 PM, Samuel Pitoiset
> <samuel.pitoiset@gmail.com> wrote:
>> Hi Hai,
>>
>> I don't know what those bits are used for, but I'm a bit curious about how
>> did you find them?
>>
>> Also, the next time don't forget to send patches related to envytools to
>> nouveau@lists.freedesktop.org
>> (or better send a pull request from github).
> fwiw, those are actually for freedreno envytools ;-)

Oh really? I have never heard about an envytools for freedreno! :)

>
> (although I suppose at some point we should maybe try to get it all
> back into a single repo..)
>
> BR,
> -R
>
>> Thanks.
>>
>>
>> On 08/13/2015 11:44 PM, Hai Li wrote:
>>> More registers and bit fields are added for PHY timings
>>> and bitclk source selection.
>>>
>>> Signed-off-by: Hai Li <hali@codeaurora.org>
>>> ---
>>>    rnndb/dsi/dsi.xml | 11 +++++++++--
>>>    1 file changed, 9 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml
>>> index 02cfa3b..956f3ff 100644
>>> --- a/rnndb/dsi/dsi.xml
>>> +++ b/rnndb/dsi/dsi.xml
>>> @@ -217,6 +217,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/
>>> rules-ng.xsd">
>>>          <reg32 offset="0x00128" name="PHY_RESET">
>>>                  <bitfield name="RESET" pos="0" type="boolean"/>
>>>          </reg32>
>>> +       <reg32 offset="0x0017c" name="T_CLK_PRE_EXTEND">
>>> +               <bitfield name="INC_BY_2_BYTECLK" pos="0" type="boolean"/>
>>> +       </reg32>
>>>          <reg32 offset="0x001d0" name="RDBK_DATA_CTRL">
>>>                  <bitfield name="COUNT" low="16" high="23" type="uint"/>
>>>                  <bitfield name="CLR" pos="0" type="boolean"/>
>>> @@ -437,7 +440,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/
>>> rules-ng.xsd">
>>>          <reg32 offset="0x001c4" name="BIST_CTRL_4"/>
>>>          <reg32 offset="0x001c8" name="BIST_CTRL_5"/>
>>>    -     <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/>
>>> +       <reg32 offset="0x001d4" name="GLBL_TEST_CTRL">
>>> +               <bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/>
>>> +       </reg32>
>>>          <reg32 offset="0x001dc" name="LDO_CNTRL"/>
>>>    </domain>
>>>    @@ -608,7 +613,9 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/
>>> rules-ng.xsd">
>>>          <reg32 offset="0x001c4" name="BIST_CTRL_4"/>
>>>          <reg32 offset="0x001c8" name="BIST_CTRL_5"/>
>>>    -     <reg32 offset="0x001d4" name="GLBL_TEST_CTRL"/>
>>> +       <reg32 offset="0x001d4" name="GLBL_TEST_CTRL">
>>> +               <bitfield name="BITCLK_HS_SEL" pos="0" type="boolean"/>
>>> +       </reg32>
>>>          <reg32 offset="0x001dc" name="LDO_CNTRL"/>
>>>    </domain>
>>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2015-08-24 20:18 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-13 21:44 [PATCH] rnndb/dsi: Add more bits for DSI PHY Hai Li
2015-08-24 20:20 ` Samuel Pitoiset
2015-08-24 20:16   ` Rob Clark
2015-08-24 20:26     ` Samuel Pitoiset [this message]
2015-08-24 20:22       ` Ilia Mirkin
2015-08-24 20:46       ` Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55DB7DF7.9030008@gmail.com \
    --to=samuel.pitoiset@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox