[PATCH v3 0/2] drm/edid: transparent low-level override/firmware EDIDs

[PATCH v3 0/2] drm/edid: transparent low-level override/firmware EDIDs

[Jani Nikula]

Patch 1 is v3 of [1]. There are no functional changes to the previous
version, just a rebase and a slight refresh of the commit message and
comments. I think the conclusion from the discussion was that this
should work just fine. At least one user reported this helped with their
audio woes with firmware EDID.

Patch 2 is an attempt to mitigate the problem of moving the
edid_firmware module parameter from drm_kms_helper to drm. Not sure if
it's too much or too little or just right. Need input here. Pedantically
it should be part of patch 1, but this division should be easier to
grasp in review.

BR,
Jani.


[1] http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-5-git-send-email-jani.nikula@intel.com

Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>


Jani Nikula (2):
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm: add backwards compatibility support for
    drm_kms_helper.edid_firmware

 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 drivers/gpu/drm/Kconfig                         |  2 +-
 drivers/gpu/drm/Makefile                        |  2 +-
 drivers/gpu/drm/drm_edid.c                      | 15 +++++++++++++++
 drivers/gpu/drm/drm_edid_load.c                 |  7 +++++++
 drivers/gpu/drm/drm_kms_helper_common.c         | 19 +++++++++++++++++++
 drivers/gpu/drm/drm_probe_helper.c              | 19 +------------------
 include/drm/drm_edid.h                          |  2 ++
 8 files changed, 47 insertions(+), 21 deletions(-)

-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 1/2] drm: handle override and firmware EDID at drm_do_get_edid() level

[Jani Nikula]

Handle debugfs override edid and firmware edid at the low level to
transparently and completely replace the real edid. Previously, we
practically only used the modes from the override EDID, and none of the
other data, such as audio parameters.

This change also prevents actual EDID reads when the EDID is to be
overridden, but retains the DDC probe. This is useful if the reason for
preferring override EDID are problems with reading the data, or
corruption of the data.

Move firmware EDID loading from helper to core, as the functionality
moves to lower level as well. This will result in a change of module
parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
arguably makes more sense anyway.

Some future work remains related to override and firmware EDID
validation. Like before, no validation is done for override EDID. The
firmware EDID is validated separately in the loader. Some unification
and deduplication would be in order, to validate all of them at the
drm_do_get_edid() level, like "real" EDIDs.

v2: move firmware loading to core

v3: rebase, commit message refresh

Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 drivers/gpu/drm/Kconfig                         |  2 +-
 drivers/gpu/drm/Makefile                        |  2 +-
 drivers/gpu/drm/drm_edid.c                      | 15 +++++++++++++++
 drivers/gpu/drm/drm_probe_helper.c              | 19 +------------------
 5 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index d9c171ce4190..9b393c29953f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -854,7 +854,7 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
-	drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
+	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
 			Broken monitors, graphic adapters, KVMs and EDIDless
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index c5e1a8409285..c9f09fc298bb 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -110,7 +110,7 @@ config DRM_FBDEV_OVERALLOC
 
 config DRM_LOAD_EDID_FIRMWARE
 	bool "Allow to specify an EDID data set instead of probing for it"
-	depends on DRM_KMS_HELPER
+	depends on DRM
 	help
 	  Say Y here, if you want to use EDID data to be loaded from the
 	  /lib/firmware directory or one of the provided built-in
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index df923119ac36..0ee184f56a60 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -28,6 +28,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o
 drm-$(CONFIG_OF) += drm_of.o
 drm-$(CONFIG_AGP) += drm_agpsupport.o
 drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
+drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 
 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
@@ -36,7 +37,6 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_scdc_helper.o drm_gem_framebuffer_helper.o
 
 drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
-drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
 drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
 drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 6bb6337be920..00ddabfbf980 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1533,6 +1533,10 @@ static void connector_bad_edid(struct drm_connector *connector,
  * level, drivers must make all reasonable efforts to expose it as an I2C
  * adapter and use drm_get_edid() instead of abusing this function.
  *
+ * The EDID may be overridden using debugfs override_edid or firmare EDID
+ * (drm_load_edid_firmware() and drm.edid_firmware parameter), in this priority
+ * order. Having either of them bypasses actual EDID reads.
+ *
  * Return: Pointer to valid EDID or NULL if we couldn't find any.
  */
 struct edid *drm_do_get_edid(struct drm_connector *connector,
@@ -1542,6 +1546,17 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 {
 	int i, j = 0, valid_extensions = 0;
 	u8 *edid, *new;
+	struct edid *override = NULL;
+
+	if (connector->override_edid)
+		override = drm_edid_duplicate((const struct edid *)
+					      connector->edid_blob_ptr->data);
+
+	if (!override)
+		override = drm_load_edid_firmware(connector);
+
+	if (!IS_ERR_OR_NULL(override))
+		return override;
 
 	if ((edid = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
 		return NULL;
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 904966cde32b..5840aabbf24e 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -353,8 +353,6 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
  *    drm_mode_probed_add(). New modes start their life with status as OK.
  *    Modes are added from a single source using the following priority order.
  *
- *    - debugfs 'override_edid' (used for testing only)
- *    - firmware EDID (drm_load_edid_firmware())
  *    - &drm_connector_helper_funcs.get_modes vfunc
  *    - if the connector status is connector_status_connected, standard
  *      VESA DMT modes up to 1024x768 are automatically added
@@ -483,22 +481,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		goto prune;
 	}
 
-	if (connector->override_edid) {
-		struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
-
-		count = drm_add_edid_modes(connector, edid);
-		drm_edid_to_eld(connector, edid);
-	} else {
-		struct edid *edid = drm_load_edid_firmware(connector);
-		if (!IS_ERR_OR_NULL(edid)) {
-			drm_mode_connector_update_edid_property(connector, edid);
-			count = drm_add_edid_modes(connector, edid);
-			drm_edid_to_eld(connector, edid);
-			kfree(edid);
-		}
-		if (count == 0)
-			count = (*connector_funcs->get_modes)(connector);
-	}
+	count = (*connector_funcs->get_modes)(connector);
 
 	if (count == 0 && connector->status == connector_status_connected)
 		count = drm_add_modes_noedid(connector, 1024, 768);
-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 2/2] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Jani Nikula]

If drm_kms_helper.edid_firmware module parameter is set at
drm_kms_helper probe time, update the new drm.edid_firmware parameter
for backwards compatibility.

The drm_kms_helper.edid_firmware is now read-only in sysfs to prevent
runtime updates.

This is a sort of easy middle ground; adding a full runtime support via
/sys/module/drm_kms_helper/parameters/edid_firmware would be possible,
but considerably more and uglier code.

Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

---

I'm wondering if the change from drm_kms_helper.edid_firmware to
drm.edid_firmware is enough of an ABI breakage to warrant something like
this patch.
---
 drivers/gpu/drm/drm_edid_load.c         |  7 +++++++
 drivers/gpu/drm/drm_kms_helper_common.c | 19 +++++++++++++++++++
 include/drm/drm_edid.h                  |  2 ++
 3 files changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 1c0495acf341..a94005529cd4 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -31,6 +31,13 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
 MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
 	"from built-in data or /lib/firmware instead. ");
 
+/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
+void __drm_set_edid_firmware_path(const char *path)
+{
+	strlcpy(edid_firmware, path, sizeof(edid_firmware));
+}
+EXPORT_SYMBOL(__drm_set_edid_firmware_path);
+
 #define GENERIC_EDIDS 6
 static const char * const generic_edid_name[GENERIC_EDIDS] = {
 	"edid/800x600.bin",
diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
index 6e35a56a6102..6130199a83b6 100644
--- a/drivers/gpu/drm/drm_kms_helper_common.c
+++ b/drivers/gpu/drm/drm_kms_helper_common.c
@@ -26,6 +26,7 @@
  */
 
 #include <linux/module.h>
+#include <drm/drmP.h>
 
 #include "drm_crtc_helper_internal.h"
 
@@ -33,10 +34,28 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
 MODULE_DESCRIPTION("DRM KMS helper");
 MODULE_LICENSE("GPL and additional rights");
 
+#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
+static char edid_firmware[PATH_MAX];
+module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0444);
+MODULE_PARM_DESC(edid_firmware, "DEPRECATED. Use drm.edid_firmware instead.");
+static inline void legacy_set_edid_firmare_path(void)
+{
+	if (edid_firmware[0]) {
+		DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, "
+			 "please use drm.edid_firmware intead.\n");
+		__drm_set_edid_firmware_path(edid_firmware);
+	}
+}
+#else
+static inline void legacy_set_edid_firmare_path(void) {}
+#endif
+
 static int __init drm_kms_helper_init(void)
 {
 	int ret;
 
+	legacy_set_edid_firmare_path();
+
 	/* Call init functions from specific kms helpers here */
 	ret = drm_fb_helper_modinit();
 	if (ret < 0)
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 1e1908a6b1d6..cdfb793255f0 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -341,12 +341,14 @@ int drm_av_sync_delay(struct drm_connector *connector,
 
 #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
 struct edid *drm_load_edid_firmware(struct drm_connector *connector);
+void __drm_set_edid_firmware_path(const char *path);
 #else
 static inline struct edid *
 drm_load_edid_firmware(struct drm_connector *connector)
 {
 	return ERR_PTR(-ENOENT);
 }
+static inline void __drm_set_edid_firmware_path(const char *path) {}
 #endif
 
 int
-- 
2.11.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 0/2] drm/edid: transparent low-level override/firmware EDIDs

[Abdiel Janulgue]

On 09/12/2017 11:19 AM, Jani Nikula wrote:
> Patch 1 is v3 of [1]. There are no functional changes to the previous
> version, just a rebase and a slight refresh of the commit message and
> comments. I think the conclusion from the discussion was that this
> should work just fine. At least one user reported this helped with their
> audio woes with firmware EDID.
> 
> Patch 2 is an attempt to mitigate the problem of moving the
> edid_firmware module parameter from drm_kms_helper to drm. Not sure if
> it's too much or too little or just right. Need input here. Pedantically
> it should be part of patch 1, but this division should be easier to
> grasp in review.
> 
> BR,
> Jani.
> 
> 
> [1] http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-5-git-send-email-jani.nikula@intel.com
> 
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 1/2] drm: handle override and firmware EDID at drm_do_get_edid() level

[Ville Syrjälä]

On Tue, Sep 12, 2017 at 11:19:26AM +0300, Jani Nikula wrote:
> Handle debugfs override edid and firmware edid at the low level to
> transparently and completely replace the real edid. Previously, we
> practically only used the modes from the override EDID, and none of the
> other data, such as audio parameters.
> 
> This change also prevents actual EDID reads when the EDID is to be
> overridden, but retains the DDC probe. This is useful if the reason for
> preferring override EDID are problems with reading the data, or
> corruption of the data.
> 
> Move firmware EDID loading from helper to core, as the functionality
> moves to lower level as well. This will result in a change of module
> parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which
> arguably makes more sense anyway.
> 
> Some future work remains related to override and firmware EDID
> validation. Like before, no validation is done for override EDID. The
> firmware EDID is validated separately in the loader. Some unification
> and deduplication would be in order, to validate all of them at the
> drm_do_get_edid() level, like "real" EDIDs.
> 
> v2: move firmware loading to core
> 
> v3: rebase, commit message refresh
> 
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
still holds

> ---
>  Documentation/admin-guide/kernel-parameters.txt |  2 +-
>  drivers/gpu/drm/Kconfig                         |  2 +-
>  drivers/gpu/drm/Makefile                        |  2 +-
>  drivers/gpu/drm/drm_edid.c                      | 15 +++++++++++++++
>  drivers/gpu/drm/drm_probe_helper.c              | 19 +------------------
>  5 files changed, 19 insertions(+), 21 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index d9c171ce4190..9b393c29953f 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -854,7 +854,7 @@
>  			The filter can be disabled or changed to another
>  			driver later using sysfs.
>  
> -	drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
> +	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
>  			Broken monitors, graphic adapters, KVMs and EDIDless
>  			panels may send no or incorrect EDID data sets.
>  			This parameter allows to specify an EDID data sets
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index c5e1a8409285..c9f09fc298bb 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -110,7 +110,7 @@ config DRM_FBDEV_OVERALLOC
>  
>  config DRM_LOAD_EDID_FIRMWARE
>  	bool "Allow to specify an EDID data set instead of probing for it"
> -	depends on DRM_KMS_HELPER
> +	depends on DRM
>  	help
>  	  Say Y here, if you want to use EDID data to be loaded from the
>  	  /lib/firmware directory or one of the provided built-in
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index df923119ac36..0ee184f56a60 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -28,6 +28,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o
>  drm-$(CONFIG_OF) += drm_of.o
>  drm-$(CONFIG_AGP) += drm_agpsupport.o
>  drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
> +drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
>  
>  drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
>  		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
> @@ -36,7 +37,6 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
>  		drm_scdc_helper.o drm_gem_framebuffer_helper.o
>  
>  drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
> -drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
>  drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
>  drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
>  drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 6bb6337be920..00ddabfbf980 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -1533,6 +1533,10 @@ static void connector_bad_edid(struct drm_connector *connector,
>   * level, drivers must make all reasonable efforts to expose it as an I2C
>   * adapter and use drm_get_edid() instead of abusing this function.
>   *
> + * The EDID may be overridden using debugfs override_edid or firmare EDID
> + * (drm_load_edid_firmware() and drm.edid_firmware parameter), in this priority
> + * order. Having either of them bypasses actual EDID reads.
> + *
>   * Return: Pointer to valid EDID or NULL if we couldn't find any.
>   */
>  struct edid *drm_do_get_edid(struct drm_connector *connector,
> @@ -1542,6 +1546,17 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
>  {
>  	int i, j = 0, valid_extensions = 0;
>  	u8 *edid, *new;
> +	struct edid *override = NULL;
> +
> +	if (connector->override_edid)
> +		override = drm_edid_duplicate((const struct edid *)
> +					      connector->edid_blob_ptr->data);
> +
> +	if (!override)
> +		override = drm_load_edid_firmware(connector);
> +
> +	if (!IS_ERR_OR_NULL(override))
> +		return override;
>  
>  	if ((edid = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
>  		return NULL;
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 904966cde32b..5840aabbf24e 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -353,8 +353,6 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
>   *    drm_mode_probed_add(). New modes start their life with status as OK.
>   *    Modes are added from a single source using the following priority order.
>   *
> - *    - debugfs 'override_edid' (used for testing only)
> - *    - firmware EDID (drm_load_edid_firmware())
>   *    - &drm_connector_helper_funcs.get_modes vfunc
>   *    - if the connector status is connector_status_connected, standard
>   *      VESA DMT modes up to 1024x768 are automatically added
> @@ -483,22 +481,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>  		goto prune;
>  	}
>  
> -	if (connector->override_edid) {
> -		struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
> -
> -		count = drm_add_edid_modes(connector, edid);
> -		drm_edid_to_eld(connector, edid);
> -	} else {
> -		struct edid *edid = drm_load_edid_firmware(connector);
> -		if (!IS_ERR_OR_NULL(edid)) {
> -			drm_mode_connector_update_edid_property(connector, edid);
> -			count = drm_add_edid_modes(connector, edid);
> -			drm_edid_to_eld(connector, edid);
> -			kfree(edid);
> -		}
> -		if (count == 0)
> -			count = (*connector_funcs->get_modes)(connector);
> -	}
> +	count = (*connector_funcs->get_modes)(connector);
>  
>  	if (count == 0 && connector->status == connector_status_connected)
>  		count = drm_add_modes_noedid(connector, 1024, 768);
> -- 
> 2.11.0

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 2/2] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Ville Syrjälä]

On Tue, Sep 12, 2017 at 11:19:27AM +0300, Jani Nikula wrote:
> If drm_kms_helper.edid_firmware module parameter is set at
> drm_kms_helper probe time, update the new drm.edid_firmware parameter
> for backwards compatibility.
> 
> The drm_kms_helper.edid_firmware is now read-only in sysfs to prevent
> runtime updates.
> 
> This is a sort of easy middle ground; adding a full runtime support via
> /sys/module/drm_kms_helper/parameters/edid_firmware would be possible,
> but considerably more and uglier code.

Hmm. Wouldn't you just have to have custom kernel_param_ops and
that's about it? Seems like that could be a bit cleaner.

> 
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> 
> ---
> 
> I'm wondering if the change from drm_kms_helper.edid_firmware to
> drm.edid_firmware is enough of an ABI breakage to warrant something like
> this patch.
> ---
>  drivers/gpu/drm/drm_edid_load.c         |  7 +++++++
>  drivers/gpu/drm/drm_kms_helper_common.c | 19 +++++++++++++++++++
>  include/drm/drm_edid.h                  |  2 ++
>  3 files changed, 28 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
> index 1c0495acf341..a94005529cd4 100644
> --- a/drivers/gpu/drm/drm_edid_load.c
> +++ b/drivers/gpu/drm/drm_edid_load.c
> @@ -31,6 +31,13 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
>  MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
>  	"from built-in data or /lib/firmware instead. ");
>  
> +/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
> +void __drm_set_edid_firmware_path(const char *path)
> +{
> +	strlcpy(edid_firmware, path, sizeof(edid_firmware));
> +}
> +EXPORT_SYMBOL(__drm_set_edid_firmware_path);
> +
>  #define GENERIC_EDIDS 6
>  static const char * const generic_edid_name[GENERIC_EDIDS] = {
>  	"edid/800x600.bin",
> diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
> index 6e35a56a6102..6130199a83b6 100644
> --- a/drivers/gpu/drm/drm_kms_helper_common.c
> +++ b/drivers/gpu/drm/drm_kms_helper_common.c
> @@ -26,6 +26,7 @@
>   */
>  
>  #include <linux/module.h>
> +#include <drm/drmP.h>
>  
>  #include "drm_crtc_helper_internal.h"
>  
> @@ -33,10 +34,28 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
>  MODULE_DESCRIPTION("DRM KMS helper");
>  MODULE_LICENSE("GPL and additional rights");
>  
> +#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
> +static char edid_firmware[PATH_MAX];
> +module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0444);
> +MODULE_PARM_DESC(edid_firmware, "DEPRECATED. Use drm.edid_firmware instead.");
> +static inline void legacy_set_edid_firmare_path(void)
> +{
> +	if (edid_firmware[0]) {
> +		DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, "
> +			 "please use drm.edid_firmware intead.\n");
> +		__drm_set_edid_firmware_path(edid_firmware);
> +	}
> +}
> +#else
> +static inline void legacy_set_edid_firmare_path(void) {}
> +#endif
> +
>  static int __init drm_kms_helper_init(void)
>  {
>  	int ret;
>  
> +	legacy_set_edid_firmare_path();
> +
>  	/* Call init functions from specific kms helpers here */
>  	ret = drm_fb_helper_modinit();
>  	if (ret < 0)
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index 1e1908a6b1d6..cdfb793255f0 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -341,12 +341,14 @@ int drm_av_sync_delay(struct drm_connector *connector,
>  
>  #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
>  struct edid *drm_load_edid_firmware(struct drm_connector *connector);
> +void __drm_set_edid_firmware_path(const char *path);
>  #else
>  static inline struct edid *
>  drm_load_edid_firmware(struct drm_connector *connector)
>  {
>  	return ERR_PTR(-ENOENT);
>  }
> +static inline void __drm_set_edid_firmware_path(const char *path) {}
>  #endif
>  
>  int
> -- 
> 2.11.0

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 2/2] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Jani Nikula]

On Fri, 15 Sep 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> Hmm. Wouldn't you just have to have custom kernel_param_ops and
> that's about it? Seems like that could be a bit cleaner.

Here's a shot at that. Completely untested, but seems like this should
do the trick, and is less complex than I anticipated.

BR,
Jani.


_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Jani Nikula]

Add drm_kms_helper.edid_firmware module parameter with param ops hooks
to set drm.edid_firmware instead, for backwards compatibility.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/drm_edid_load.c         | 16 ++++++++++++++++
 drivers/gpu/drm/drm_kms_helper_common.c | 28 ++++++++++++++++++++++++++++
 include/drm/drm_edid.h                  |  2 ++
 3 files changed, 46 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
index 1c0495acf341..a4915099aaa9 100644
--- a/drivers/gpu/drm/drm_edid_load.c
+++ b/drivers/gpu/drm/drm_edid_load.c
@@ -31,6 +31,22 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
 MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
 	"from built-in data or /lib/firmware instead. ");
 
+/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
+int __drm_set_edid_firmware_path(const char *path)
+{
+	scnprintf(edid_firmware, sizeof(edid_firmware), "%s", path);
+
+	return 0;
+}
+EXPORT_SYMBOL(__drm_set_edid_firmware_path);
+
+/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
+int __drm_get_edid_firmware_path(char *buf, size_t bufsize)
+{
+	return scnprintf(buf, bufsize, "%s", edid_firmware);
+}
+EXPORT_SYMBOL(__drm_get_edid_firmware_path);
+
 #define GENERIC_EDIDS 6
 static const char * const generic_edid_name[GENERIC_EDIDS] = {
 	"edid/800x600.bin",
diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
index 6e35a56a6102..5051c3aa4d5d 100644
--- a/drivers/gpu/drm/drm_kms_helper_common.c
+++ b/drivers/gpu/drm/drm_kms_helper_common.c
@@ -26,6 +26,7 @@
  */
 
 #include <linux/module.h>
+#include <drm/drmP.h>
 
 #include "drm_crtc_helper_internal.h"
 
@@ -33,6 +34,33 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
 MODULE_DESCRIPTION("DRM KMS helper");
 MODULE_LICENSE("GPL and additional rights");
 
+#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
+
+/* Backward compatibility for drm_kms_helper.edid_firmware */
+static int edid_firmware_set(const char *val, const struct kernel_param *kp)
+{
+	DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead.\n");
+
+	return __drm_set_edid_firmware_path(val);
+}
+
+static int edid_firmware_get(char *buffer, const struct kernel_param *kp)
+{
+	return __drm_get_edid_firmware_path(buffer, PAGE_SIZE);
+}
+
+const struct kernel_param_ops edid_firmware_ops = {
+	.set = edid_firmware_set,
+	.get = edid_firmware_get,
+};
+
+module_param_cb(edid_firmware, &edid_firmware_ops, NULL, 0644);
+__MODULE_PARM_TYPE(edid_firmware, "charp");
+MODULE_PARM_DESC(edid_firmware,
+		 "DEPRECATED. Use drm.edid_firmware module parameter instead.");
+
+#endif
+
 static int __init drm_kms_helper_init(void)
 {
 	int ret;
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 1e1908a6b1d6..6f35909b8add 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -341,6 +341,8 @@ int drm_av_sync_delay(struct drm_connector *connector,
 
 #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
 struct edid *drm_load_edid_firmware(struct drm_connector *connector);
+int __drm_set_edid_firmware_path(const char *path);
+int __drm_get_edid_firmware_path(char *buf, size_t bufsize);
 #else
 static inline struct edid *
 drm_load_edid_firmware(struct drm_connector *connector)
-- 
2.11.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Ville Syrjälä]

On Mon, Sep 18, 2017 at 09:20:03PM +0300, Jani Nikula wrote:
> Add drm_kms_helper.edid_firmware module parameter with param ops hooks
> to set drm.edid_firmware instead, for backwards compatibility.
> 
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>  drivers/gpu/drm/drm_edid_load.c         | 16 ++++++++++++++++
>  drivers/gpu/drm/drm_kms_helper_common.c | 28 ++++++++++++++++++++++++++++
>  include/drm/drm_edid.h                  |  2 ++
>  3 files changed, 46 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
> index 1c0495acf341..a4915099aaa9 100644
> --- a/drivers/gpu/drm/drm_edid_load.c
> +++ b/drivers/gpu/drm/drm_edid_load.c
> @@ -31,6 +31,22 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
>  MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
>  	"from built-in data or /lib/firmware instead. ");
>  
> +/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
> +int __drm_set_edid_firmware_path(const char *path)
> +{
> +	scnprintf(edid_firmware, sizeof(edid_firmware), "%s", path);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(__drm_set_edid_firmware_path);
> +
> +/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
> +int __drm_get_edid_firmware_path(char *buf, size_t bufsize)
> +{
> +	return scnprintf(buf, bufsize, "%s", edid_firmware);

I guess these could just use strlcpy() or something.

> +}
> +EXPORT_SYMBOL(__drm_get_edid_firmware_path);
> +
>  #define GENERIC_EDIDS 6
>  static const char * const generic_edid_name[GENERIC_EDIDS] = {
>  	"edid/800x600.bin",
> diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
> index 6e35a56a6102..5051c3aa4d5d 100644
> --- a/drivers/gpu/drm/drm_kms_helper_common.c
> +++ b/drivers/gpu/drm/drm_kms_helper_common.c
> @@ -26,6 +26,7 @@
>   */
>  
>  #include <linux/module.h>
> +#include <drm/drmP.h>
>  
>  #include "drm_crtc_helper_internal.h"
>  
> @@ -33,6 +34,33 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
>  MODULE_DESCRIPTION("DRM KMS helper");
>  MODULE_LICENSE("GPL and additional rights");
>  
> +#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
> +
> +/* Backward compatibility for drm_kms_helper.edid_firmware */
> +static int edid_firmware_set(const char *val, const struct kernel_param *kp)
> +{
> +	DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead.\n");
> +
> +	return __drm_set_edid_firmware_path(val);
> +}
> +
> +static int edid_firmware_get(char *buffer, const struct kernel_param *kp)
> +{
> +	return __drm_get_edid_firmware_path(buffer, PAGE_SIZE);
> +}
> +
> +const struct kernel_param_ops edid_firmware_ops = {
> +	.set = edid_firmware_set,
> +	.get = edid_firmware_get,
> +};
> +
> +module_param_cb(edid_firmware, &edid_firmware_ops, NULL, 0644);

Do we want the __parm_check thing here? Looks like it's just some kind of
compile time type check though so not critical by any means.

Otherwise looks technically correct so
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> +__MODULE_PARM_TYPE(edid_firmware, "charp");
> +MODULE_PARM_DESC(edid_firmware,
> +		 "DEPRECATED. Use drm.edid_firmware module parameter instead.");
> +
> +#endif
> +
>  static int __init drm_kms_helper_init(void)
>  {
>  	int ret;
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index 1e1908a6b1d6..6f35909b8add 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -341,6 +341,8 @@ int drm_av_sync_delay(struct drm_connector *connector,
>  
>  #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
>  struct edid *drm_load_edid_firmware(struct drm_connector *connector);
> +int __drm_set_edid_firmware_path(const char *path);
> +int __drm_get_edid_firmware_path(char *buf, size_t bufsize);
>  #else
>  static inline struct edid *
>  drm_load_edid_firmware(struct drm_connector *connector)
> -- 
> 2.11.0

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH] drm: add backwards compatibility support for drm_kms_helper.edid_firmware

[Jani Nikula]

On Mon, 18 Sep 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Mon, Sep 18, 2017 at 09:20:03PM +0300, Jani Nikula wrote:
>> Add drm_kms_helper.edid_firmware module parameter with param ops hooks
>> to set drm.edid_firmware instead, for backwards compatibility.
>> 
>> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
>> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>>  drivers/gpu/drm/drm_edid_load.c         | 16 ++++++++++++++++
>>  drivers/gpu/drm/drm_kms_helper_common.c | 28 ++++++++++++++++++++++++++++
>>  include/drm/drm_edid.h                  |  2 ++
>>  3 files changed, 46 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
>> index 1c0495acf341..a4915099aaa9 100644
>> --- a/drivers/gpu/drm/drm_edid_load.c
>> +++ b/drivers/gpu/drm/drm_edid_load.c
>> @@ -31,6 +31,22 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
>>  MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
>>  	"from built-in data or /lib/firmware instead. ");
>>  
>> +/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
>> +int __drm_set_edid_firmware_path(const char *path)
>> +{
>> +	scnprintf(edid_firmware, sizeof(edid_firmware), "%s", path);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(__drm_set_edid_firmware_path);
>> +
>> +/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
>> +int __drm_get_edid_firmware_path(char *buf, size_t bufsize)
>> +{
>> +	return scnprintf(buf, bufsize, "%s", edid_firmware);
>
> I guess these could just use strlcpy() or something.

strlcpy() returns strlen(source) while scnprintf() returns the number of
chars written to destination (minus the terminating NUL), and that's
what the kernel param ops expect. I took this directly from
kernel/params.c, and preferred to use the same for both get and set.

>
>> +}
>> +EXPORT_SYMBOL(__drm_get_edid_firmware_path);
>> +
>>  #define GENERIC_EDIDS 6
>>  static const char * const generic_edid_name[GENERIC_EDIDS] = {
>>  	"edid/800x600.bin",
>> diff --git a/drivers/gpu/drm/drm_kms_helper_common.c b/drivers/gpu/drm/drm_kms_helper_common.c
>> index 6e35a56a6102..5051c3aa4d5d 100644
>> --- a/drivers/gpu/drm/drm_kms_helper_common.c
>> +++ b/drivers/gpu/drm/drm_kms_helper_common.c
>> @@ -26,6 +26,7 @@
>>   */
>>  
>>  #include <linux/module.h>
>> +#include <drm/drmP.h>
>>  
>>  #include "drm_crtc_helper_internal.h"
>>  
>> @@ -33,6 +34,33 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
>>  MODULE_DESCRIPTION("DRM KMS helper");
>>  MODULE_LICENSE("GPL and additional rights");
>>  
>> +#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
>> +
>> +/* Backward compatibility for drm_kms_helper.edid_firmware */
>> +static int edid_firmware_set(const char *val, const struct kernel_param *kp)
>> +{
>> +	DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead.\n");
>> +
>> +	return __drm_set_edid_firmware_path(val);
>> +}
>> +
>> +static int edid_firmware_get(char *buffer, const struct kernel_param *kp)
>> +{
>> +	return __drm_get_edid_firmware_path(buffer, PAGE_SIZE);
>> +}
>> +
>> +const struct kernel_param_ops edid_firmware_ops = {
>> +	.set = edid_firmware_set,
>> +	.get = edid_firmware_get,
>> +};
>> +
>> +module_param_cb(edid_firmware, &edid_firmware_ops, NULL, 0644);
>
> Do we want the __parm_check thing here? Looks like it's just some kind of
> compile time type check though so not critical by any means.

It's useless here, because we don't actually store the parameter here,
and just pass NULL.

> Otherwise looks technically correct so
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Thanks,
Jani.

>
>> +__MODULE_PARM_TYPE(edid_firmware, "charp");
>> +MODULE_PARM_DESC(edid_firmware,
>> +		 "DEPRECATED. Use drm.edid_firmware module parameter instead.");
>> +
>> +#endif
>> +
>>  static int __init drm_kms_helper_init(void)
>>  {
>>  	int ret;
>> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
>> index 1e1908a6b1d6..6f35909b8add 100644
>> --- a/include/drm/drm_edid.h
>> +++ b/include/drm/drm_edid.h
>> @@ -341,6 +341,8 @@ int drm_av_sync_delay(struct drm_connector *connector,
>>  
>>  #ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE
>>  struct edid *drm_load_edid_firmware(struct drm_connector *connector);
>> +int __drm_set_edid_firmware_path(const char *path);
>> +int __drm_get_edid_firmware_path(char *buf, size_t bufsize);
>>  #else
>>  static inline struct edid *
>>  drm_load_edid_firmware(struct drm_connector *connector)
>> -- 
>> 2.11.0

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 0/2] drm/edid: transparent low-level override/firmware EDIDs

[Jani Nikula]

On Tue, 12 Sep 2017, Jani Nikula <jani.nikula@intel.com> wrote:
> Patch 1 is v3 of [1]. There are no functional changes to the previous
> version, just a rebase and a slight refresh of the commit message and
> comments. I think the conclusion from the discussion was that this
> should work just fine. At least one user reported this helped with their
> audio woes with firmware EDID.
>
> Patch 2 is an attempt to mitigate the problem of moving the
> edid_firmware module parameter from drm_kms_helper to drm. Not sure if
> it's too much or too little or just right. Need input here. Pedantically
> it should be part of patch 1, but this division should be easier to
> grasp in review.

Pushed to drm-misc-next, with the updated version of patch 2 to handle
drm_kms_helper.edid_firmware backwards compat properly.

BR,
Jani.


>
> BR,
> Jani.
>
>
> [1] http://patchwork.freedesktop.org/patch/msgid/1487344854-18777-5-git-send-email-jani.nikula@intel.com
>
> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
>
> Jani Nikula (2):
>   drm: handle override and firmware EDID at drm_do_get_edid() level
>   drm: add backwards compatibility support for
>     drm_kms_helper.edid_firmware
>
>  Documentation/admin-guide/kernel-parameters.txt |  2 +-
>  drivers/gpu/drm/Kconfig                         |  2 +-
>  drivers/gpu/drm/Makefile                        |  2 +-
>  drivers/gpu/drm/drm_edid.c                      | 15 +++++++++++++++
>  drivers/gpu/drm/drm_edid_load.c                 |  7 +++++++
>  drivers/gpu/drm/drm_kms_helper_common.c         | 19 +++++++++++++++++++
>  drivers/gpu/drm/drm_probe_helper.c              | 19 +------------------
>  include/drm/drm_edid.h                          |  2 ++
>  8 files changed, 47 insertions(+), 21 deletions(-)

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx