[PATCH V2] drm/i915: relax uncritical udelay_range()

[PATCH V2] drm/i915: relax uncritical udelay_range()

[Nicholas Mc Guire]

udelay_range(1, 2) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50 which helps
the hrtimer subsystem optimize timer handling.

Fixes: commit be4fc046bed3 ("drm/i915: add VLV DSI PLL Calculations") 
Link: http://lkml.org/lkml/2016/12/15/147
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
---

V2: use relaxed uslee_range() rather than udelay
    fix documentation of changed timings

Problem found by coccinelle:

Patch was compile tested with: x86_64_defconfig (implies CONFIG_DRM_I915)

Patch is against 4.9.0 (localversion-next is next-20161215)

 drivers/gpu/drm/i915/intel_dsi_pll.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
index 56eff60..d210bc4 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -156,8 +156,10 @@ static void vlv_enable_dsi_pll(struct intel_encoder *encoder,
 	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL,
 		      config->dsi_pll.ctrl & ~DSI_PLL_VCO_EN);
 
-	/* wait at least 0.5 us after ungating before enabling VCO */
-	usleep_range(1, 10);
+	/* wait at least 0.5 us after ungating before enabling VCO,
+	 * allow hrtimer subsystem optimization by relaxing timing
+	 */
+	usleep_range(10, 50);
 
 	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, config->dsi_pll.ctrl);
 
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH V2] drm/i915: relax uncritical udelay_range()

[Jani Nikula]

On Fri, 16 Dec 2016, Nicholas Mc Guire <hofrat@osadl.org> wrote:
> udelay_range(1, 2) is inefficient and as discussions with Jani Nikula
> <jani.nikula@linux.intel.com> unnecessary here. This replaces this
> tight setting with a relaxed delay of min=20 and max=50 which helps
> the hrtimer subsystem optimize timer handling.
>
> Fixes: commit be4fc046bed3 ("drm/i915: add VLV DSI PLL Calculations") 
> Link: http://lkml.org/lkml/2016/12/15/147
> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>

Pushed to drm-intel-next-queued, thanks for the patch.

BR,
Jani.

> ---
>
> V2: use relaxed uslee_range() rather than udelay
>     fix documentation of changed timings
>
> Problem found by coccinelle:
>
> Patch was compile tested with: x86_64_defconfig (implies CONFIG_DRM_I915)
>
> Patch is against 4.9.0 (localversion-next is next-20161215)
>
>  drivers/gpu/drm/i915/intel_dsi_pll.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
> index 56eff60..d210bc4 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_pll.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
> @@ -156,8 +156,10 @@ static void vlv_enable_dsi_pll(struct intel_encoder *encoder,
>  	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL,
>  		      config->dsi_pll.ctrl & ~DSI_PLL_VCO_EN);
>  
> -	/* wait at least 0.5 us after ungating before enabling VCO */
> -	usleep_range(1, 10);
> +	/* wait at least 0.5 us after ungating before enabling VCO,
> +	 * allow hrtimer subsystem optimization by relaxing timing
> +	 */
> +	usleep_range(10, 50);
>  
>  	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, config->dsi_pll.ctrl);

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx